INSTRUCTIONS

Installing the Camera on
the Ceiling
Configure the video format settings using the
SYSTEM SELECT switch before installing.
You are recommended to update the firmware to
the latest version before installing.
(A P
26 [Firmware Update] )
1
Remove the
4 feet from the bottom surface
of the camera
.
2
Use three M3 screws and one 1/4 inch
screw that come with the camera to attach
the ceiling mounting
bracket (camera side)
to the bottom surface of the camera
.
3
Mount the camera to the ceiling mount
bracket (ceiling side)
Attach the hook on the ceiling mounting bracket
(camera side) to the hole on the ceiling
mounting bracket (ceiling side).
4
Use three M3 screws that come with the
camera to attach
.
Fasten the drop prevention wire (sold
separately) together with one of the screws.
.
Connect the cables after these procedures.
22
Installing the Camera on the Ceiling
Installation/Connection