INSTRUCTIONS

Iris
For configuring the iris value (F number).
[Setting Values: RF1.8, F2.0, F2.4, F2.8, F3.4,
F4.0, F4.8, F5.6, F6.8, F8.0, F9.6, F11.0, Close]
Memo :
0
This item can be configured when [Mode] is
configured to “Manual” or “AAE”.
Shutter
For configuring the shutter speed.
0
For “60Hz” [Video Format]
[Setting
values: 1/30,
1/60, 1/90, 1/100, R1/125,
1/180, 1/250, 1/350, 1/500, 1/725, 1/1000,
1/1500, 1/2000, 1/3000, 1/4000, 1/6000,
1/10000]
0
For “50Hz”
[Video Format]
[Setting values: 1/25, 1/50, 1/75, 1/100, R1/120,
1/150, 1/250, 1/350, 1/500, 1/725, 1/1000,
1/1500, 1/2000, 1/3000, 1/4000, 1/6000,
1/10000]
Memo :
0
This item can be configured when [Mode] is
configured to “Manual” or “SAE”.
0
“1/30
” can be selected when frame rate is
configured to 30p/29.97p, and “1/25” can be
selected when frame rate is configured to 25p.
(A P34 [Selecting the Video Output Resolution
and Frame Rate] )
Gain
This function electrically boosts the light sensitivity
when there is insufficient illumination on the object.
You can set the gain of the video amplifier
according to the brightness of the object.
[Setting Values: 0 to 15 (R2)]
Memo :
0
This item can
be configured when [Mode] is set
to “Manual”.
Bright
Adjusts the brightness.
[Setting Values: 0 to 17 (R7)]
Memo :
0
This
item
can
be configured when [Mode] is set
to “Bright”.
Gain Limit
For configuring the maximum value for
automatically switching the
gain level according to
the brightness.
[Setting Values: 1 to 15 (R9)]
Memo :
0
This item can be configured when [Mode] is
configured to “Auto”, “SAE”, “AAE” or “Bright”.
Anti-Flicker
For correcting video
image flicker that occurs under
a fluorescent light.
T
0
For “60Hz” [Video Format]
[Setting Values: 50Hz, R60Hz, Off]
0
For
“50Hz”
[Video Format]
[Setting Values: R50Hz, 60Hz, Off]
U S
[Setting Values: 50Hz, 60Hz, ROff]
Memo :
0
This item can be configured when [Exposure] is
configured to “Auto”, “AAE” or “Bright”.
Meter
Shutter speed, iris (F number) and ISO speed are
controlled to adjust
the exposure to an appropriate
level according to the brightness of the subject in
the [Mode] settings. Use this setting to configure
the method of compensation in this case.
[Setting Values: RAverage, Center, Smart, Top]
Memo :
0
This item can be configured when [Mode] is
configured to “Auto”, “SAE”, “AAE” or “Bright”.
DRC
Adjusts the intensity of DRC.
[Setting Values: 0 to 8 (R0)]
40
Exposure
Menu Display and Detailed Settings