Additional manual

Tracking Start Position
Sets the tracking start position.
If the tracking target cannot be detected, the camera returns to 【Tracking Start Position】.
[Setting Values︓●Current Position, Home Position, Preset1 ] (Standard)
[Setting Values︓●Current Position, Home Position, Preset1, W1, W2 ] (Wide Area)
【Starting Auto Tracking in Standard】
１. Click the 【Standard】 tab on the tracking page
of the View Remote Screen.
２. Set the items in the 【Standard】 tab.
３. Set the 【Tracking Mode】 to "Standard".
４. Frame the tracking target within the angle of
view.
５. Set the 【Tracking】 to "on" to start Auto Tracking.
Auto trackin
g
starts after the camera PTZ
position is moved to 【Tracking Start Postion】.
【Stop Auto Tracking】
Set the 【Tracking】 to "off".
Auto Trackin
g
sto
p
s and the camera PTZ
p
osition
returns to 【Tracking Start Position】.
1
2
3
4
5
Startin
g
Auto Trackin
g
in Standard
5