Additional manual
Area
Sets up to four areas horizontally as the shooting range, tracks only when the target moves to the next area.
The PTZ position also moves to the next area to follow the target.
While the target person is within the same area, the PTZ position is fixed even if the person moves.
The PTZ position returns to the 【Starting Area】 when the target moves out of the area and the time set by
【Target Retention Time】 is exceeded.
【Area Setting】
A1, A2, A3, A4
Use the 【Set】 button to register the view angles of the
A1, A2, A3 and A4.
The image and PTZ position when the button is pressed
are saved as a preset.
Presets 187 【A1】, 188 【A2】, 189 【A3】, 190 【A4】 are used.
The 【Delete】 button allows you to delete a registered
p
reset.
Starting Area
Sets the tracking start position. If the tracking target
cannot be detected after 【Target Retention Time】 is
exceeded, the PTZ position returns to 【Starting Area】.
[Setting Values︓●A1, A2, A3, A4 ]
Common Settings
You can set 【Target Retention Time】.
A1
A2 A3
A4
A2
A2
You can confi
g
ure u
p
to four areas.
When the target is moving in each
area, PTZ position keep in the same.
The camera tracks and change area only when
the target moves in the adjacent area.
Area Setting
6