INSTRUCTIONS

P
Preset Delete button
Deletes the information of the pan, tilt or zoom
position that has been configured to the preset
number.
Q
Direct preset number
Moves to the preset number directly with one
action.
Pressing 1 moves the camera lens to Preset
number 1.
R
Focus mode
Switches between Auto Focus and Manual
Focus.
S
Streaming button
Switches streaming to on or off.
T
Tracking button
Switches the Auto-Tracking to on or off.
Memo :
You can also start and stop tracking from the View
Remote screen
0
Start tracking: Set the Tracking button to
“on”.
0
Stop tracking: Set the Tracking button to “off”.
(A P50 [Auto-Tracking] )
U
Language button
For
configuring the display language on the web
screen.
[Setting Values: REnglish, Français, Deutsch,
Italiano, Español, Pусский, 中文(簡), 日本語]
V
Video
Setting this button from “off” to “on” restores the
position of Preset number 1 and outputs the
camera image. (The camera enters into video
on mode.)
Setting this button from “on” to “off” moves the
pan/tilt position to the rear facing down and
stops the camera image output. (The camera
enters into video off mode.)
Image
This is the setting for adjusting the image quality.
Memo :
0
To display the menu on the camera’s video
image, configure [Encode Codec
] of [First
stream] or [Second stream] to “H.264”. If the
menu display is too small, decrease the
[Resolution] for [First stream] or [Second
stream] accordingly.
Exposure
9
Mode
For selecting the method for controlling the
exposure.
0
Auto
Gain/Shutter/Iris are adjusted automatically.
0
Manual
Gain/Shutter/Iris
operate according to the menu
setting.
0
SAE
Shutter speed is configured according to the
setting in the [Shutter] menu, while gain and iris
is automatically adjusted.
0
AAE
Iris is configured according to the setting in the
[Iris], while gain and shutter speed are
automatically adjusted.
0
Bright
Adjusts the brightness of the RAW data.
[Setting Values: RAuto, Manual, SAE, AAE, Bright]
9
ExpCompMode
Performs exposure compensation when this is
configured to on.
[Setting Values: on, Roff]
Memo :
0
This
item can be configured when [Mode] is set
to “Auto”.
9
ExpComp
Adjusts the exposure compensation value.
[Setting Values: -7 to +7 (R0)]
Memo :
0
This item can be configured when
[ExpCompMode] is set to
“on”.
View Remote Screen
29
Using View Remote