Car Docking Kit KS-K6002/KS-K6001 INSTALLATIONS LVT1195-001A [J]
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ INFORMATION (Only for KS-K6002) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Safety Precautions WARNINGS: Take the following precautions to prevent traffic accidents and avoid personal injury: • Installation must be performed according to this installation manual. JVC is not responsible for issues arising from installations not performed according to the procedures in this manual.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Box Contents After you unpack your Car Docking Kit, make sure everything here is included: Car Docking Cradle Cigarette Lighter Adapter Suction Cup Mount Fuse (250 V/3A) Screws (M4 x 8 mm) Magnetic Roof-mount SIRIUS Antenna Audio Cord (only for KS-K6001) Cassette Adapter (only for KS-K6001) For the latest information about this and other JVC PnP products, visit the JVC Web site at
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Installation in Your Car CAUTION: Do not put JVC PnP in the car docking cradle until you have completed the installation. 1 Determine where you want to mount JVC PnP. • Do not install JVC PnP where it may obstruct your view through the windshield or your view of your car’s indicator displays. • Do not install JVC PnP where it will hinder your access to the car’s controls.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Installation in Your Car (Continued) CAUTION: Do not plug the cigarette lighter adapter into he cigarette lighter until you have completed the installation. 3 Plug the cigarette lighter adapter into the back of the cradle—DC 12V. 4 For KS-K6001: A If your car stereo does not have a line input (LINE IN or AUX)... Plug the cassette adapter into the back of the cradle—AUDIO OUT.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Only for KS-K6002: An optional hard-wired FM transmitter—FM Switching Box Assembly (Parts No. 112C3159) is available. By connecting this Assembly between the FM OUT terminal of the cradle and the antenna input terminal of your car stereo, you can obtain stable and reliable transmission/reception. 4 B If your car stereo has a line input (LINE IN or AUX)...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Finding the Best Antenna Mounting Location 1 Temporarily plug the antenna into the back of the cradle—SAT (MAIN) until it is firmly seated. 2 Find an antenna location on a metal surface of your car—at least 30 cm × 30 cm (12 inches × 12 inches), and at least 15 cm (6 inches) from a window. • The antenna’s powerful magnet will secure it to the metal surface.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 4 Slide JVC PnP all the way into the cradle so that the connector at the bottom of the unit makes proper contact in the cradle. 5 Press the JVC PnP. (POWER) button to turn on your • If your JVC PnP has been properly connected and the antenna is receiving the SIRIUS signal, you will hear audio.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Running the Antenna Cable Before routing the antenna cable, confirm that the antenna is mounted in a good location. 1 Turn off your JVC PnP then remove it from the cradle. 2 Unplug the cigarette lighter adapter from the cigarette lighter and the antenna from the cradle. 3 Route the cable from the antenna into the trunk by tucking it underneath the rubber molding around rear window.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • Route the cable from the lowest point of the rear window. Take advantage of any existing cable channels or wiring conduits. • For SUVs, minivans & 5-door vehicles, bring the cable into the car under the rubber molding for the tailgate, and continue under the interior trim. 4 From the trunk, route the cable around the passenger compartment and to the back of the cradle.
KS-K6002/KS-K6001 http://www.jvcmobile.com US RESIDENTS ONLY Having TROUBLE with operation? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! VICTOR COMPANY OF JAPAN, LIMITED EN © 2003 VICTOR COMPANY OF JAPAN, LIMITED 1203MNMMDWKRI Car Docking Kit Visit us on-line for Technical Support & Customer Satisfaction Survey.
