COLOUR VIDEO MONITOR : FARB-VIDEO-MONITOR : MONITEUR VIDÉO COULEUR : MONITOR VIDEO A COLORI : MONITOR DE VIDEO A COLOR INSTRUCTIONS – PHASE CHROMA BRIGHT CONTRAST MENU + VOLUME/SELECT B ESPAÑOL ITALIANO FRANÇAIS DEUTSCH TM-A14E ENGLISH BEDIENUNGSANLEITUNG MANUEL D’INSTRUCTIONS ISTRUZIONI MANUAL DE INSTRUCCIONES A INPUT SELECT _ON —OFF POWER TM-A14E LCT2141-001A-H cover1_TM-A14E_f.indd 1 06.6.
Thank you for purchasing this JVC colour video monitor. Before using it, read and follow all instructions carefully to take full advantage of the monitor’s capabilities. SAFETY PRECAUTIONS In order to prevent any fatal accidents caused by misoperation or mishandling the monitor, be fully aware of all the following precautions. WARNINGS To prevent fire or shock hazard, do not expose this monitor to rain or moisture. Dangerous high voltages are present inside the unit.
POWER CONNECTION WARNING The wire which is coloured green-and-yellow must be connected to the terminal which is marked with the letter E or the safety earth symbol or coloured green or green-and-yellow. The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the main supply.
CONTROLS AND FEATURES FRONT VIEW 1 2 3 4 6 5 – PHASE CHROMA BRIGHT CONTRAST MENU 7 + 9 8 B p A _ON —OFF INPUT SELECT VOLUME/SELECT POWER – PHASE CHROMA BRIGHT CONTRAST MENU + VOLUME/SELECT B q A INPUT SELECT TM-A14E w _ON —OFF POWER TM-A14E e 1 Phase button [PHASE 8 Input A button [INPUT SELECT A] ] Press this button to set the picture hue adjustment mode. Adjust the value with the VOLUME/SELECT buttons.
REAR VIEW VIDEO IN AUDIO B IN OUT A Y/C IN OUT B IN OUT VIDEO A IN OUT r t y u AUDIO B IN OUT A Y/C IN B IN OUT For United Kingdom i o To AC outlet (230 V AC, 50 Hz/60 Hz) r Video A terminals [VIDEO A IN/OUT] Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected. IN : Video signal input terminal OUT : Bridge-connected video signal output terminal Notes: * For corresponding audio signals, use the AUDIO A terminals y.
HOW TO HANDLE BASIC OPERATIONS BASIC OPERATION Colour system indication (PAL or NTSC) 1. Press the POWER switch to turn on the power. _ON : Power turns ON. (Power indicator: lit) —OFF : Power turns OFF. (Power indicator: unlit) _ON —OFF PAL POWER 2. Press the INPUT SELECT button to choose input. Selects video/audio signals input to terminals on the rear panel.
HOW TO USE THE MENU FUNCTIONS DISPLAY AND SELECTION IN THE
HOW TO USE THE MENU FUNCTIONS (cont’d) DISPLAY AND SELECTIONS IN THE MODE (SETTING) screen You can set the following set-up menu items. ● H. POSITION ● WHITE BALANCE ● CONTROL LOCK Note: ● Parameters for H. POSITION can be set separately depending on the video input (Input A or Input B) selected by the input select buttons on the front panel. Select the required video input with the input select buttons on the front panel in advance. 1 ‰ H.
H. POSITION WHITE BALANCE DRIVE CUT OFF Purpose Settings Adjusts the horizontal position of the screen (+ : Horizontal position shifts to the right/–: Horizontal position shifts to the left). –05 –04 •• –01 00 +01 •• +04 +05 Adjusts the white balance. Selects DRIVE (DRV) or CUT OFF (CUTO) adjustment. Screen setting is changed to the selected setting mode. Select R/G/B buttons corresponding to the function display to adjust. R.DRIVE Adjusts red level.
HOW TO INITIALIZE THE SETTING SCREEN DISPLAY AND SELECTIONS IN THE RESET MODE You can set and screen items, picture adjustment items and the volume level to their factory-set (initial) values. RESET screen RESET 1. Press the POWER ( OFF ( —).
BASIC CONNECTION EXAMPLE Notes: ● Before connecting your system, make sure that all units are turned off. ● The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting. ● Each pair of input (IN) and output (OUT) terminals are bridge-connected. However, the Y/C input terminal (Y/C IN) has no output terminal (OUT) corresponding to it.
TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Problems Points to be checked Measures (Remedy) No power supply. Is the power plug loosened or disconnected? Firmly insert the power plug. No picture with the power on. Is the video signal output from the connected component? Set the connected component correctly.
SPECIFICATIONS MODEL TM-A14E Type Colour video monitor Colour system PAL, NTSC (3.58) Picture tube 36 cm measured diagonally, 90° deflection, in-line gun, vertical line trio type (phosphor stripe pitch 0.64 mm) Effective screen size Width Height Diagonal 280.8 mm 210.6 mm 335.4 mm Scanning frequency H : 15.734 kHz (NTSC), 15.625 kHz (PAL) V : 59.
7 Dimensions Unit : mm < Side View > < Front View > 371.5 368 370 1.5 287 BRIGHT CONTRAST MENU + VOLUME/SELECT B A INPUT SELECT _ON —OFF POWER 1 CHROMA 2 – PHASE * 310 * 217 102 TM-A14E 334 (Front foot) 300 (Mid foot) 296 (Rear foot) 16 92 122.5 * Asterisks (∗) are used to indicate front panel dimensions. 7 Y/C (Mini DIN 4 pin) terminal specification Y/C IN 4 2 3 1 Pin No. Signal 1 GND (Y) 2 GND (C) 3 Y 4 C 14 02-15EN_TM-A14E_f.indd 14 06.6.
ENGLISH 15 02-15EN_TM-A14E_f.indd 15 06.6.
TM-A14E © 2006 Victor Company of Japan, Limited cover4_TM-A14E_f.indd 72 0606STH-MW-MT 06.6.