® Machine Models Compatible for Connection with this Product DLA-HD2KU This product (LD-HD2KU) is exclusively for the above-mentioned model. The performance cannot be guaranteed when using with other models. This processor is used as a dedicated machine and this manual (instruction manual) may contain description of features as well as specifications not used by the processor. DLA-HD2KE This product (LD-HD2KE) is exclusively for the above-mentioned model.
SAFETY PRECAUTIONS IMPORTANT INFORMATION IMPORTANT SAFEGUARDS WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPROPER USE OF THIS EQUIPMENT CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. CAUTION: To reduce the risk of electric shock, do not remove cover. Refer servicing to qualified service personnel. This product is equipped with a 3-blade grounding type plug to satisfy UL, CUL, TUV, FCC rules.
– Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock. – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards.
TABLE OF CONTENTS SAFETY PRECAUTIONS ............................................................................................................................................... 2 QUICK START ................................................................................................................................................................ 5 INSTALLATION .............................................................................................................................................
QUICK START Connection with Other Devices Before connecting to other devices, ensure to turn off the power supply of the device to be connected with the digital video processor. 䡵 Connecting to a Projector ● Read through the projector’s instruction manual thoroughly. ● Depending on the DVI cable used, signals may be attenuated and images may become unstable. Use high-quality DVI cables that are 5 m or shorter.
INSTALLATION 3 8 9 p q OUTPUT INPUT Y/C VIDEO RED/Pr GREEN/Y 12 RED/Pr BLUE/Pb C-SYNC GREEN/Y BLUE/Pb I/R REMOTE SCREEN MONITOR OUTPUT DVI INPUT 4 5 6 Accessories The following accessories are packed together with this unit. Please confirm all items. If any item is missing, please contact your dealer. • Remote Control • AA/R6 size Battery (for operation confirmation) • Guarantee Placement The processor can be either placed on a table or rack mounted.
Installation (continued) 7 DVI Output: Digital output interface for compatible displays. All processed analog and digital inputs are output to this connector as well as computer scan rates when the pass-through input is selected. Maximum cable length is 50ft with a high quality DVI cable. For longer lengths a distribution system or fiber optic system must be used. 8 BNC connectors for main output with RGBHV or YPrPb signals to display devices.
SETUP POWER 1 2 3 FRONT PANEL CONTROL 1 Firmware Reset: Push a small paper clip into this opening to reset the unit’s CPU. ● Use this reset only if the unit will not respond to commands. It will not erase custom settings. Use the Factory Restore command in the Setup Menu to completely reset firmware. See the setup section of the manual for details. 2 Power / Standby: Press to turn the unit On (LED turns Green) or to Standby (Red).
Setup (continued) SET : BLACK LEVEL (For setting the black level) SET : PASSTHRU TRANSCODE 7.5 IRE / 0 IRE (Default) For setting the black signal level of the video signal. When the video signal is “7.5 IRE Setup”, set to “7.5 IRE”. Disable (Default) / Enable YPrPb HDTV signals via the D15 input or the YprPb (BNC) inputs can be transcoded to RGB when this feature is enabled.
IR REMOTE/OSD IR REMOTE AND OSD OPERATION This unit is now shipped with a simplified remote control that allows for direct access to most commands used to control the processor. Adjustments can be made three different ways: 1. Press the Menu button to activate the OSD and use the Function and Value keys to make changes. Press Menu again to remove OSD. 2. Press the direct access key (Brightness, etc.) and then adjust using the left/right value keys. 3.
䡵 Input Menu INPUT PICTURE PATTERNS DISPLAY ● When using a 4:3 source on a Wide Angle screen there are black bars on the left and right of the image. The sidebars can be changed to gray using the Blanking Level control located in the Display menu. If filling the entire screen is desired, select Letterbox. The image will fill the screen but the top and bottom 1/3 of the image will be cut off (overscanned).
Osd (continued) Color Factory 50 Adjust the color density of the picture image. 䡵 Display Menu INPUT PICTURE DISPLAY PATTERNS Tint Factory 50 Tint is not available with YPrPb or PAL sources POSITION HORIZONTAL 25 VERTICAL 25 BORDER LVL 0 LEFT RIGHT BOTTOM TOP Detail Factory 4 ● The Detail circuit is a powerful tool for image quality. The settings have been optimized for the output scan rate and resolution.
RS232 䡵 Patterns Menu The best approach to system setup is to use a DVD that offers the proper test patterns. This way, the system is aligned for the entire signal path. If a test DVD is not available, then use the internal test patterns provided in this unit. ● The test pattern generator in this unit is set to SMPTE standards. To insure proper output levels for display setup, the picture controls in this unit cannot be accessed when the test patterns are being used.
RS232 (continued) Following the header, a comma is used to delimit the header from the command. All the commands with their descriptions are listed below. All the text strings are terminated with a carriage return (0x0d or 13). Maximum command string length is 250 characters.
SETUP COMMANDS (Normally not controlled by RS232) OPTIONS OR RANGE COMMAND DESCRIPTION BB# (0-192) Bottom Blanking BL# (0-252) Border Level – black to white BLT# (0-255) LCD Backlite Timer on front panel CS# 1=On 0=OFF Composite Sync – for RGB output DVI Input Disabled DVD DVI Input Enabler DVE 1=On 0=OFF E# RS-232 ECHO PassThru Input Disabled EXTD PassThru Input Enabled EXTE HP# (0-50) 25 default Horizontal Position LB# (0-200) Left Blanking M# (0-1) [0=RGB, 1=YPrPb] Output M
HELP MENUS TEST PATTERN HELP MENU TP0 TEST PATTERN OFF TP1 100% COLOR BARS TP2 REVERSE COLOR BARS TP3 10 STEP GREY TP4 LUMA RAMP TP5 CB RAMP TP6 CR RAMP TP7 BLACK SCREEN TP8 GREEN SCREEN TP9 RED SCREEN TP10 BLUE SCREEN TP11 CONVERGENCE TP12 ACTIVE BORDER TP13 SMPTE PATTERN TP14 WHITE WINDOW TP15 PLUGE Output Scan Rate 16 Horizontal Frequency Vertical Frequency 1920 x 540P 33.8 KHz 59.94 Hz 720 x 576P 31.3 KHz 50.00 Hz 800 x 600P 37.6 KHz 59.94 Hz 1280 x 720P 45.
SPECIFICATIONS 䡵 Model Name/ Article Name LD-HD2KU/LD-HD2KE Digital Video Processor 䡵 Colour System NTSC, PAL (Auto switching) 䡵 Video Input Signal Horizontal Frequency Vertical Frequency 480i 15.7 KHz 29.97 Hz 480p 31.5 KHz 59.97 Hz 576i 15.6 KHz 25.00 Hz 576p 31.3 KHz 50.00 Hz 720p 37.5 KHz 50.00 Hz 720p 45.0 KHz 59.97 Hz 1080i 28.1 KHz 25.00 Hz 1080i 33.7 KHz 29.
MEMO ......................................................................................................................... ......................................................................................................................... ......................................................................................................................... ......................................................................................................................... ...................
LD-HD2KU/LD-HD2KE DIGITAL VIDEO PROCESSOR ® VICTOR COMPANY OF JAPAN, LIMITED © 2004 VICTOR COMPANY OF JAPAN, LIMITED Printed in Japan 0504-SW-VP