INSTRUCTIONS BEDIENUNGSANLEITUNG MANUEL D’INSTRUCTIONS ISTRUZIONI MANUAL DE INSTRUCCIONES ИHCТРУKЦИЯ ПО ЭКСПЛУАТАЦИИ 使用说明书 LM-H191 LM-H171 LCD DISPLAY MONITOR LCD-DISPLAYMONITOR MONITEUR LCD SCHERMO A CRISTALLI LIQUIDI MONITOR PANTALLA LCD МОНИТОР С ЖК-ДИСПЛЕЕМ LCD 显示器 The illustration of the monitor is of LM-H191. LCT2401-002A-H LMH191&171EA_cover1.indd 1 ITALIANO FRANÇAIS DEUTSCH ENGLISH ESPAÑOL РУССКИЙ 中文 08.7.
LM-H191 LM-H171 INSTRUCTIONS LCD DISPLAY MONITOR Table of Contents Safety Precautions .............................................. 2 IMPORTANT SAFEGUARDS ........................... 2 Maintenance ..................................................... 3 Installation............................................................ 4 Daily Operations / Connections ......................... 6 Front panel ....................................................... 6 Rear panel ........................................
2 Safety Precautions WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. IMPORTANT SAFEGUARDS Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRIC SHOCK OR FIRE.
U.S.A. only FCC NOTICE (U.S.A. only) CAUTION: Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
4 Installation CAUTION To detach the stand • Do not rest your arm on the monitor or lean against the monitor. • Do not touch the LCD panel when installing the monitor. • Make sure to install the monitor securely to prevent the monitor from falling over, which causes damage to the monitor or injury. CAUTION Lay the monitor on a cloth with the LCD panel facing down to prevent the LCD panel from being damaged.
To adjust the stand height To prevent an accidental fall To change the stand height, change the position of the stand plate as illustrated below after detaching the stand from the monitor. • For detaching the stand, see “To detach the stand” on page 4. Fix the monitor to a wall by using strings.
6 Daily Operations / Connections 7 Front panel • “NO EFFECT” is displayed when you press a button which is not available for the current input or signal format (the lamp lights even when the function does not actually work). • The items controlled by the MAKE system cannot be controlled by the buttons on the front panel (“REMOTE ON” is displayed and the lamps do not light). 1 2 3 4 5 6 7 8 9 p The illustration of the monitor is of LM-H191.
Resetting the Picture Mode Main Menu Operations Setup Menu Operations You can reset the following picture adjustments you have made for each Picture Mode. • Adjustments by the buttons on the front panel • “SHARPNESS,” “CTI.,” and “LTI.” in the MAIN MENU (☞ page 10) 1 Press MENU button. 1 Press Selected item button while pressing MENU button. Selected item 1 Press PICTURE MODE button repeatedly to select the mode you want to reset. 2 Press and hold PICTURE MODE button.
8 Daily Operations / Connections (cont.) 7 Rear panel Note for connections 2 3 4 • Before making any connections, turn off all the equipment. • Use a cord whose plugs correctly match the terminals on this monitor and the equipment. • Plugs should be firmly inserted; poor connections could cause noise. • When unplugging a cord, be sure to grasp its plug and pull it out. • DO NOT connect the power cord until all connections are completed. • Refer also to the user manual of each piece of equipment.
7 Available signals Frequency Signal type Horizontal (kHz) Vertical (Hz) NTSC (3.58) 15.734 (60/)59.94 BW/60 PAL 15.734 15.625 (60/)59.94 50 BW/50 480/60p 576/50p VGA VGA_TEXT SVGA 15.625 31.5/31.469 31.25 31.47 31.47 35.15 37.879 48.363 56.476 47.396 63.981 50 60/50.94 50 59.94 70.08 56.25 60.317 60.004 70.069 59.99 60.
10 Menu Configuration—MAIN MENU BACK LIGHT For the operation procedure, see page 7. Setting value: 00 – 25 Adjusts the brightness of the display. When VIDEO 1 or VIDEO 2 is selected for the input: SHARPNESS*1, 2 Selected Picture Mode Select by pressing PICTURE MODE on the front panel (☞ 7 on page 6). (Not displayed when “STD.” is selected.) Setting value: 00 – 10 Adjusts the sharpness of the picture. CTI.
Menu Configuration—SET UP MENU PICTURE SUB ADJ. For the operation procedure, see page 7. Adjusts the standard level for the picture adjustment. Item CONTRAST*1 BRIGHT*1 CHROMA*1, 2 PHASE*1, 2 sub menu reset To do Setting value Adjust the standard level for the contrast adjusted with CONTRAST button on the front panel. Adjust the standard level for the brightness adjusted with BRIGHT button on the front panel.
12 Menu Configuration—SET UP MENU (cont.) SYNC FUNCTION Setting for the synchronization with signals Item SYNC TYPE NO SYNC ACTION To do Select the sync signal for RGB input. Select the screen status when no signal is coming in. Select the period until the screen status changes as selected in “NO SYNC ACTION” after signals stop coming in. DELAY TIME Setting value H/V. SYNC, C.SYNC, G.ON SYNC OFF, POWER SAVE (Power Save mode), GRAY BACK (Gray Back mode) 30 sec., 5 min., 15 min. • The C.
External Control 7 About the external control This monitor has the MAKE/TRIGGER terminal, which allows you to control the monitor by the make contact or the trigger system. • MAKE (make contact) system: Controls the monitor by short-circuiting the corresponding pin terminal to the GND pin terminal, or disconnecting (opening) it. • TRIGGER (trigger) system: Controls the monitor by sending the pulse signal instantaneously to the corresponding pin terminal.
14 Troubleshooting Solutions to common problems related to the monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult an authorized dealer or service center. Symptom Probable cause and corrective action Page No power supply • Firmly insert the AC power plug. 8 No picture with the power on • Select the correct input with INPUT SELECT buttons. • Connect the signal cable firmly.
When the screen goes blank, and the power lamp on the front panel starts flashing in red... The monitor is malfunctioning. Specifications 7 General Model name The illustration of the monitor is of LM-H191. 1 2 Disconnect the AC power cord from the AC outlet. Contact your dealer. • If you turn on the monitor soon after turning it off (or after a short-term power failure), the power lamp may flash and no image may be displayed. In this case, wait at least 10 seconds before turning on the monitor again.
16 Specifications (cont.) LM-H191 LM-H171 Video 29 (1 1/4) VIDEO 1 Y/C Input of Y/C signal: Y/C connector x 1 Y: 1 V(p-p), 75 Ω C: 0.286 V(p-p), 75 Ω (for NTSC) 0.3 V(p-p), 75 Ω (for PAL) DVI-D DVI-D signal input: DVI-D connector x 1 (compatible with DDC2B) RGB Input of analog RGB signal: D-sub 15-pin x 1 G: 1 V(p-p), 75 Ω G. on sync: 0.3 V(p-p) B, R: 0.7 V(p-p), 75 Ω H. sync: TTL V. sync: TTL C. sync: TTL TTL: LOW: 0 V – 0.8 V HIGH: 2.5 V – 5 V 100 (4) 1.5 (1/16) 46 (1 7/8) *1 369.
LM-H191/LM-H171 LCD DISPLAY MONITOR © 2008 Victor Company of Japan, Limited LM-H191&171EA_Cover.indb 4 0708STH-MW-MT 08.7.
