English English SPEAKER STAND LS-M1 INSTRUCTIONS LVT1248-002A [US] cover_LS-M1[US].p65 3 04.10.
English Thank you for purchasing a JVC product. Before you begin using it, please read the instructions carefully. Warnings, Cautions and Others 7 Precautions Warning Observe the following carefully before installation; otherwise, the speaker may fall over, causing damage or injury. – Do not install the speaker stand on an uneven surface or in a place subject to vibration. – Do not lean against the speaker stand. Especially pay attention to children not to do so.
Installing Speaker Before assembling— • Prepare a Phillips screwdriver. • Place a large, thick cloth on the floor where you assemble the speaker stand to protect the floor and the speaker stand. 7 Assembling the speaker stand • Tighten the screws firmly so that no space is left between the legs and plates. 1 Fix the top plate. • Align the projection of the legs to the holes of the top plate correctly, then attach them with three of the supplied screws B (M6 x 16 mm).
LS-M1 SPEAKER STAND EN, CS, CT © 2004 Victor Company of Japan, Limited cover_LS-M1[US].p65 2 1104NSMMDWHCE 04.11.