ENGLISH DEUTSCH FRANÇAIS ITALIANO LT-15B60SE ©2005 VICTOR COMPANY OF JAPAN, LIMITED 1004TKH-VT-VT LCD PANEL TV INSTRUCTIONS LCD-TV-GERÄT PANNEAU LCD TELEVISEUR TV A SCHERMO LCD MANUEL D'INSTRUCTIONS BEDIENUNGSANLEITUNG ISTRUZIONI
Contents For your safety For your safety ......................................... 1 Important Information ............................. 4 Remote Control Buttons .......................... 5 Control Panel Buttons ............................. 6 Using the stand ........................................ 7 How to remove the stand ........................ 7 Installing TV on the wall .......................... 8 Preparation .............................................. 9 Before Switching on your TV ...........
IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN. DO DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (including the mains plug, extension leads and inter-connections between pieces of equipment) are properly made and in accordance with the manufacturers instructions. Switch off and withdraw the mains plug before making or changing connections.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING Do not allow children to hang from the TV, place their elbows on the TV or lean against the TV. Doing so may cause the TV to fall over and lead to injuries. CAUTION: To avoid electric shock or damage to the unit, first firmly insert the small end of the power cord into the AC Adaptor unit it is no longer wobbly, and then plug the larger end of power cord into an AC outlet.
Important Information Please take note EXCLUSION CLAUSE JVC shall under no circumstances be liable for loss and/or damage to the product caused by: fire; earthquake; accidental damage; intentional misuse of the product; use of the product in improper conditions; loss and/or damage caused to the product whilst in the possession of a third party; any damage or loss caused as a result of the owner s failure and/or neglect to follow the instructions set out in the owners manual; any loss or da
Remote Control Buttons / I = (Stand By) button TV / VCR / DVD Switch Number buttons AV button (EXT-1, EXT-1S, EXT-1RGB, EXT-2, EXT-2S or PC) BLUE / PICTURE Mode button YELLOW / Sleep Timer button MENU button = Cursor Up button OK button = Cursor Right button BACK button Volume Up/Down buttons Teletext / VCR /DVD Control buttons Programme Up/Down buttons = Cursor Down button = Teletext Button = Cursor Left button = Stereo / Bilingual button GREEN /
Control Panel Buttons 32:(5 /$03 ,1)5$5(' 5(&(,9(5 63($.(5 63($.(5 92/80( '2:1 67$1' %< 352*5$0 '2:1 92/80( 83 0(18 352*5$0 83 79 $9 2. ENGLISH - 6 01-ENG-1525-17MB18-1861UK_15B60SE.p65 6 30.06.
Using the stand This TV comes with a Table Top Stand already attached. This stand can be used to adjust the direction of the TV screen. Tilt the TV up and down: While holding the stand with one hand which should be on lower level of the stand for avoiding trapping, use your other hand to hold the middle of the top of the TV and slowly tilt the TV up and down. How to remove the stand 5(029( 7+( 6&5(:6 67$1' ENGLISH - 7 01-ENG-1525-17MB18-1861UK_15B60SE.p65 7 30.06.
Installing TV on the wall WARNING When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV. Make sure that the TV is installed on the wall by a skilled installer. Locate the TV away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing.
PLL (Frequency Search) Preparation Install Display on solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. PC input (Support Up to 1024 x 768) Before Switching on your TV Power connection Only use the adaptor supplied with this product. $& DGDSWRU Features It is a remote controlled colour television and PC monitor.
How to connect other devices Switching the TV ON/OFF IMPORTANT: Switch off the TV before connecting any external device. To switch the TV on Sockets for external connections are at the back of the TV. For connection of other devices via Euroconnector refer to the manuals of the related devices. 1- Connect the power supply cord to the system. Then the TV switches itself to standby mode and the power lamp becomes red.
Initial Settings Operating the TV First A.P.S. (Automatic Programming System) You can operate your TV using both the remote control handset and onset buttons. The following menu will be displayed on the screen when you turn the TV on for the first time. A.P.S. searches and sorts all channels and stores them automatically on your TV, according to the transmission of programme systems in your area.
Menu System Your TV has been designed with a menu system to provide an easy manipulation of a multifunction system. The TV is controlled by choosing the commands, which are displayed on the screen. Programme Selection (Previous or next programme) Press the MENU button. The menu will be displayed in the middle of the screen. button to select the previous Press programme.
Setting Contrast Using or or Max.. button select Contrast. Press button to increase contrast level. Press button to decrease contrast level. Setting Hue This item is displayed in Picture menu when the TV receives an NTSC signal. Using or button select Hue. Press button to increase hue level. Press button to decrease hue level.
Setting Volume Press button to increase volume. )HDWXUH 6OHHS 7LPHU &KLOG /RFN /DQJXDJH %OXH %DFN Press button to decrease volume. Or you can directly change the volume set+ (to increase) or (to tings using decrease) button. 2II 2II 2Q (QJOLVK 2II 2Q Setting Bass Level Using or button select Bass Level. Press button to increase bass level. Press button to decrease bass level.
The Blue Background feature can be turned Setting Program Name on or off by pressing or button. To Store Settings Using Name. In Feature menu all settings are stored automatically. Press button to select a character and or button to change it. Installation Menu After the program name is entered, press By pressing or button, select the fourth icon. Installation menu appears on the screen. or button select Program button to exit.
If you want to watch a VCR source, then it will be better to set VCR mode on. For this, while the cursor is on this item press the or button to set it On. If you want to watch a DVD , then you must set this item off; because DVD is not a source like a VCR and to see the picture better, you must set the VCR mode Off. Using the YELLOW button you can delete any programme you want. A.P.S. (Auto Programming System) By pressing button, select the third icon. A.P.S.
Source Menu To Display the Time By pressing or button, select the fifth icon. Source menu appears on the screen. While watching a TV programme with teletext If the programme being watched does not have teletext transmission, no time information will be displayed. 6RXUFH 79 (;7 (;7 6 (;7 5*% (;7 (;7 6 3& The time information will disappear after pressing the or button again. Sound Indicator button is used to select Mono or Stereo, or Dual I or Dual II.
Sleep Timer AUTO Sleep Timer mode OSD is displayed when YELLOW button is pressed. See page 14 for detailed information. When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal or the signal from an external device, the TV automatically changes the ZOOM mode to 4:3 or 16:9 according to the WSS signal. Mute Indicator It is placed in the upper right side of the screen when enabled, and it stays there until it is disabled.
Horizontal Position This item shifts the image horizontally to right hand side or left hand side of the screen. 3& 3LFWXUH &RQWUDVW %ULJKW &RORXU 7HPSHUDWXUH 1RUPDO Select H. Position item by using button. or Use or button to adjust the value. Press MENU button or BACK button to store the value. Vertical Position 5HVHW GRZQ IRU 3& SLFWXUH The items in this menu are described at Picture menu starting page 12.
To select a page of Teletext Press the appropriate digit buttons for the required Teletext page number. 6RXUFH 79 (;7 (;7 6 (;7 5*% (;7 (;7 6 3& The selected page number is displayed at the top left corner of the screen. The Teletext page counter searches until the selected page number is located, so that the desired page is displayed on the screen. Press button to move the Teletext screen forward one page at a time.
To Stop Automatic Page Change For Fastext and Toptext The teletext page you have selected may contain more information than what is on the screen; the rest of the information will be displayed after a period of time. The subject-heading for the information may have a particular colour. Press an appropriate RED, GREEN, YELLOW or BLUE button in order to reach the relevant page quickly. Press button to stop the automatic page change.
Via the ANT (aerial) socket NTSC Playback If your equipment does not have an Euroconnector or RCA jacks, connect it to the TV with an aerial cable. For details, see the manual provided with the equipment. Connect a NTSC video recorder to a terminal. Then press AV button to select the corresponding AV mode. To store the test signal that comes from the equipment, see Installation Menu on page 15 and store it to the program number 0.
Peripheral Equipment Connections / 5 6 $ +($'3+21( % $8',2 / 5 & 9,'(2 ,1 ' 6 9,'(2 ,1 ( ) $17(11$ '& ,1 $'$3725 * 3& $8',2 ,1 + (;7 , 3& ,1387 (;7 9 9 9 9 ENGLISH - 23 01-ENG-1525-17MB18-1861UK_15B60SE.p65 23 30.06.
Antenna Connections 2XWGRRU $QWHQQD &RQQHFWLRQV 9+) DQWHQQD 5RXQG RKP FRD[LDO FDEOH 5HDU RI 79 )ODW RKP WZLQ OHDG FDEOH 9+) 8+) DQWHQQD 5HDU RI 79 5RXQG RKP FRD[LDO FDEOH Peripheral Equipment Connections HEADPHONE AUDIO $8',2 ,1 / 9,'(2 ,1 5 VIDEO ,1 ,1 $17 ,1 &$0&25'(5 FOR SATELLITE RECEIVER DECODER ENGLISH - 24 01-ENG-1525-17MB18-1861UK_15B60SE.p65 24 287 30.06.
PC Input Typical Display Modes The display has a maximum resolution of 1024 x 768, vertical sync. frequency range of 50-72 Hz and a horizontal sync. frequency range of 30-57 KHz. The following table is an illustration of some of the typical video display modes.
PC Picture Tips Can not turn the TV on? Check that TV/VCR/DVD switch is set to TV position. TV may go to stand-by mode when you turn the TV on soon after you turn the TV off. If you can turn the TV on again, it is not a problem. Can not turn the TV off? Check that TV/VCR/DVD switch is set to TV position. Care of the Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer.
Specifications Item Model LT-15B60SE Broadcasting Systems PAL SECAM BG, DK, I, L, Lp Channels and VHF (VL) : 46,25 MHz - 168,25 MHz Frequencies VHF (VH) : 175,25 MHz - 463,25 MHz UHF : 471,25 MHz - 863,25 MHz Cable TV : (S1-S20/ S21-S41) Input Signal Video: Analog 0,7 Vp-p 75 ohm positive Sync: TTL Level positive or negative, Seperate sync. Horizontal Timing 30 - 69 KHz Vertical Timing 50 - 75 Khz Dot Rate 78,75 MHz max.