ENGLISH FRANÇAIS CASTELLANO LT-17X475 LT-23X475 LCD FLAT TELEVISION TELEVISEUR A ECRAN PLAT – LCD TELEVISOR PLANO LCD INSTRUCTIONS MANUEL D’INSTRUCTIONS MANUAL DE INSTRUCCIONES
Important Safety Precautions ENGLISH CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : To reduce the risk of eletric shock. Do not remove cover (or back). No user serviceable parts inside.
• As an “ENERGY STAR®” partner, JVC has determined that this product or product model meets the “ENERGY STAR®” guidelines for energy efficiency. IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Thank you for buying this JVC LCD flat television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. (“LCD” stands for Liquid Crystal Display.) WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING Always use the provided AC adapter and power cord. ENGLISH WARNING • Fingers may be trapped under the TV causing injuries. Hold the TV at the bottom in the middle, and do not allow it to tilt up or down.
Point defects LCDs use collections of fine pixels to display images. While there is no problem with more than 99.99% of these pixels, please understand that a very small number of pixels may not light or may light all the time. Distance recommendations Avoid improper installation and never position the unit where good ventilation is impossible. When installing this TV, distance recommendations must be maintained between the set and the wall, as well as inside a tightly enclosed area or piece of furniture.
CONTENTS Setting up your TV..................................6 TV buttons and functions ......................9 Turn the TV on from standby mode ...................9 Choose a TV channel ........................................9 Watch images from external devices .................9 Adjust the volume ..............................................9 Using the Menu..................................................9 Remote control buttons and functions ............................................
Setting up your TV Installation Cautions for installation • Install the TV in a corner on a wall or on the floor so as to keep cords out of the way. • The TV will generate a slight amount of heat during operation. Ensure that sufficient space is available around the TV to allow satisfactory cooling. See “Distance recommendations” on page 4. Using the stand This TV comes with a Table Top Stand already attached.
Setting up your TV Putting the batteries into the Remote control Use two AA/R6 dry cell batteries. Insert the batteries from the - end, making sure the + and - polarities are correct. ENGLISH • • • • Follow the warnings printed on the batteries. Battery life is about six months to one year, depending on your frequency of use. The batteries we supply are only for setting up and testing your TV, please replace them as soon as you need to.
Setting up your TV Connecting the aerial and video cassette recorder (VCR) Connecting the power cord to the AC outlet • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected. If you are connecting a AC adapter, follow in the diagram below. • Connect If you are connecting a VCR, follow in the diagram below. If you are not connecting a VCR, follow to the TV and to the AC outlet. Caution .
TV buttons and functions 1 Turn the TV on from standby mode Press the POWER button or CHANNEL buttons to turn the TV on from standby mode • Check that the AC plug on the power cord from the TV is connected to correctly AC outlet.
Remote control buttons and functions 1 MUTING POWER 11 12 2 100+ 3 4 INPUT VIDEO ASPECT STATUS MTS SLEEP TIMER 13 14 15 C.C. 16 5 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Muting button Number buttons ASPECT button VIDEO STATUS button C.C.
Remote control buttons and function Displaying the source information Adjust the volume buttons to adjust the volume. Press the VOLUME The volume indicator appears and the volume changes as you press the VOLUME buttons. Press the DISPLAY button to display the source information. Pressing the DISPLAY button changes the display as follows: Pressing the muting button again restores the previous volume level.
Remote control buttons and functions ASPECT function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ASPECT modes. REGULAR: Use to view a normal picture (4:3 aspect ratio) as this is its original shape. PANORAMA: This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the screen, without making the picture appear unnatural. • The top and bottom of the picture are slightly cut off.
Remote control buttons and functions Using the PC PIP function A PC picture and TV or a video program from an external device can be watched at the same time. 1 Press the PIP button. Operating a JVC brand VCR or DVD player These buttons will operate a JVC brand VCR or DVD player. Pressing a button that looks the same as the device’s original remote control button has the same effect as the original remote control.
Using the TV’s menu This TV has a number of functions you can operate using menus. To use all your TV’s functions, you need to understand the basic menu operating techniques fully. MUTING 4 Press the / buttons to choose the setting of that function • If you want to operate a function which appears only with its name, follow the descriptions of that function on the following pages.
PICTURE SETTING Refer to “Using the TV’s menu” (see page 14) for details of displaying the menu. You can select one of three COLOR TEMP. modes (three tones of white) to adjust the white balance of the picture. Since white is the color which is used as a reference for all the other colors, changing the COLOR TEMP. mode affects the appearance of all the other colors on the screen. PICTURE HIGH: A bluish white.
SOUND SETTING Refer to “Using the TV’s menu” (see page 14) for details of displaying the menu. SOUND BASS TREBLE BALANCE HYPER SURROUND : SELECT OFF : OPERATE Sound Adjustment You can adjust the sound to your liking. BASS: You can adjust the low tone of the sound. : weaker : strong TREBLE: You can adjust the high tone of the sound. : weaker : strong BALANCE: You can adjust the volume balance between the left and right speaker. : turn the left speaker’s volume level up.
FEATURES Refer to “Using the TV’s menu” (see page 14) for details of displaying the menu. FEATURES NOISE MUTING OFF FRONT PANEL LOCK OFF AUTO SHUT OFF OFF : OPERATE ENGLISH : SELECT NOISE MUTING You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an external device. ON: This function is turned on. OFF: This function is turned off.
INITIAL SETUP CLOSED CAPTION Select CAPTION or TEXT and press the / buttons to select a caption (CC1 to CC4) or text channel (T1 to T4). CC1 TEXT T1 : SELECT : OPERATE Many broadcasts now include an onscreen display of dialog called closed captions. Some broadcasts may also include displays of additional information in text form. Your TV can access and display this information using the closed caption feature.
INITIAL SETUP Note: If you want to change the setup, move the cursor to the top column and change the lock icon to " - " by pressing or again. You may then select indivual categories to block. SET LOCK CODE Channel guard and V-Chip settings are protected by a fourdigit lock code. Your TV comes preset with a lock code of "0000". You may change the code to any four-digit number you wish. Movies Ratings : • NR - Not Rated This is a film which has no rating.
PC MENU (In PC mode only) This TV also has a number of functions on PC mode, you can operate using pc menus. PC MENU PC PICTURE POSITION COLOR TEMPERATURE: You can adjust the picture color mode. PC PICTURE SOUND OK : OPERATE 1024 X 768 H : 48 kHz V : 60 Hz PC PICTURE POSITION You can adjust the picture settings as following functions. At first, we recommend you complete the AUTO SET UP before you start using your PC.
PC MENU PC support mode list LT-17X475 Mode NO. Mode Name Resolution H Freq. (kHz) V Freq. (Hz) 1 VGA 60 Hz 640x480 31.469 59.941 2 SVGA 56 Hz 800x600 35.16 56.25 3 SVGA 60 Hz 800x600 37.879 60.317 4 XGA 60 Hz 1024x768 48.363 60.004 5 WXGA 1280x768 47.73 60 Mode Name Resolution H Freq. (kHz) V Freq. (Hz) 1 VGA 70 Hz 640x350 31.469 70.087 2 VGA 60 Hz 640x480 31.469 59.941 3 SVGA 56 Hz 800x600 35.16 56.25 4 SVGA 60 Hz 800x600 37.879 60.317 5 XGA 60 Hz 1024x768 48.363 60.
Additional preparation Connecting external equipment Connect the equipment to the TV, making the correct rear panel and front panel connections. Before connecting anything: • Read the manuals that came with the equipment. Depending on the equipment, the connection method may be different from the diagram. Also, the equipment settings may need to change depending on the connection method. • Turn off all the equipment including the TV. • The “Specifications” on page 29 give the details of the EXT terminals.
Additional preparation Connecting headphones Connecting the PC • Do not connect Subwoofer and Amplifier simultaneously. They cannot use simultaneously. • According to your using cable cord type, it may be difficult to insert your using cable cord to the Audio output terminal or PC audio terminal. (LT-17X475) Connect the PC with the D-SUB cable to the D-SUB in at the TV, and connect the sound device of PC with a stereo mini-jack to PC AUDIO IN.
Troubleshooting If a problem arises while you are using the TV, please read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if the mains plug is disconnected from the mains outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
Troubleshooting Other concerns • When the SLEEP TIMER function operates, the TV is automatically turned off. If the TV suddenly turns off, try to press the standby button to turn on the TV once again. If the TV goes back to normal, there is no problem. • It takes a short period of time from the time an operation such as changing channels is performed until an image is displayed. This is not a malfunction. This is the time required for the image to stabilize before it can be displayed.
ENGLISH 27
28
Specifications Model Item LT-23X475 LT-17X475 US M TV system Color systems NTSC Channels and frequencies • Channels(on air) VHF 2 to 13, UHF 14 to 69 • Channels(CABLE) 1 to 125 Sound-multiplex systems US system Power requirements TV : 12V DC, Power source : AC 120V 60 Hz TV : 24V DC, Power source : AC 120V 60 Hz Power consumption 60 W, Standby : 3 W 120W, Standby : 3 W Screen size Viewable area 43.5 cm(measured diagonally) Viewable area 58.
5 5030057021 0304-TN-TU
