Color profile: Disabled Composite Default screen ENGLISH DEUTSCH FRANÇAIS ITALIANO LT-26B60BU LT-26B60SU 50074712 ©2005 VICTOR COMPANY OF JAPAN, LIMITED 1004TKH-VT-VT D:\GUNCEL IB\JVC_LT26B60&BU&SU&SJ (2625W)\Grup-1-(LT-26B60BU&SU)\GRP1-COVER PAGE-2625W-17MB08P-1860UK-(LT-26B60BU&SU)-50074712.
Contents For your safety For your safety ......................................... 1 Important Information ............................. 4 Remote Control Buttons .......................... 5 Control Panel Buttons and Terminals .... 6 How to remove the stand ........................ 8 Installing TV on the wall .......................... 9 Preparation ............................................ 10 Before Switching on your TV ................ 10 Switching the TV ON/OFF .......................
DO DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (including the mains plug, extension leads and inter-connections between pieces of equipment) are properly made and in accordance with the manufacturers instructions. Switch off and withdraw the mains plug before making or changing connections. DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING Do not allow children to hang from the TV, place their elbows on the TV or lean against the TV. Doing so may cause the TV to fall over and lead to injuries. CAUTION: To avoid electric shock or damage to the unit, first firmly connect the small end of the power cord to the rear of the TV and then plug the larger end of power cord into an AC outlet.
Important Information Please take note EXCLUSION CLAUSE JVC shall under no circumstances be liable for loss and/or damage to the product caused by: fire; earthquake; accidental damage; intentional misuse of the product; use of the product in improper conditions; loss and/or damage caused to the product whilst in the possession of a third party; any damage or loss caused as a result of the owner s failure and/or neglect to follow the instructions set out in the owners manual; any loss or da
Remote Control Buttons / I = (Stand By) button ' 9 ' TV / VCR / DVD Switch 9 7 Number buttons 5 & 9 AV button (EXT-1, EXT-2, EXT-2S, EXT-3, EXT-4, EXT-4S, PC) BLUE / PICTURE Mode button YELLOW / Sleep Timer button MENU button = Cursor Up button OK button = Cursor Right button 3,&785( 0(18 BACK button = Volume + / - buttons Teletext / VCR /DVD Control buttons PC Control Buttons P =220 $9 buttons 2. %$&.
Control Panel Buttons and Terminals 67$1' %< 352*5$00( 83 '2:1 92/80( 83 '2:1 0(18 79 $9 2. +($'3+21( 63($.(5 ,1)5$5(' 5(&(,9(5 32:(5 /$03 63($.(5 With certain combinations of connectors and leads the back cover may not be easily fitted. If the cover is left off, this in no way infringes safety requirements.
9 9 $&a +] $ 3& ,1387 % (;7 & (;7 ' (;7 ( $17(11$ ) 3& $8',2 ,1 * (;7 + $8',2 287 7(50,1$/ < 3E 3U &RPSRQHQW $XGLR ,Q 5 &RPSRQHQW $XGLR ,Q / 6 9LGHR ,Q 9LGHR ,Q $XGLR 5 $XGLR / $XGLR 5 $XGLR / 6XEZRRIHU 2XW , 32:(5 &25' ,1387 - 21 2)) 6:,7&+ ENGLISH - 7 - 32:(5
How to remove the stand Loosen the 5 screws that attach the stand to the TV. Gently pull the stand downwards to remove it.
Installing TV on the wall WARNING When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV. Make sure that the TV is installed on the wall by a skilled installer. Locate the TV away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing.
Preparation Install Display on solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. When no valid signal is detected, after 5 minutes the TV switches itself automatically to stand-by mode. NTSC Playback. PLL (Channel Search) TV Picture in PC (if PC input available).
Inserting batteries in the remote control handset Remove the battery cover located on the back of the handset by gently pulling downwards from the indicated part. Insert two AA/R6 dry cell or equivalent type of batteries inside. Replace the battery cover. Switching the TV ON/OFF To switch the TV on Your TV will switch on in two steps: 1- Connect the power cord to the system. Press the On/Off switch at the rear of the TV.
T-V Link Initial Settings First A.P.S. (Automatic Programming System) When you turn the TV on for the first time, the first APS menu appears. APS, searches and sorts all channels and stores them automatically on your TV, according to the transmission of programme systems in your area. When a T-V Link compatible VCR connected to the EXT-2 terminal on the TV, it is easier to set up the VCR and to view videos.
If FEATURE NOT AVAILABLE is displayed, download was not performed correctly. Before trying to download again, check that: The VCR power is turned on. Operating the TV You can operate your TV using both the remote control handset and onset buttons. Volume setting and programme selection can be made by using the buttons at the control panel on the right side of the TV. The VCR is T-V Link compatible. The VCR is connected to the EXT-2. The scart cable is fully wired.
Menu System Your TV has been designed with a menu system to provide an easy manipulation of a multifunction system. The TV is controlled by choosing the commands, which are displayed on the screen. 3 Programme Selection (Previous or next programme) Press button to select the previous programme. MAIN MENU Press the MENU button. The main menu will be displayed in the middle of the screen. Press button to select the next programme.
3LFWXUH %ULJKW 3LFWXUH %ULJKW 0RGH &RQWUDVW %ULJKW 6KDUSQHVV &RORXU &RORXU 7HPS &RRO 1RLVH 5HG 2II 5(6(7 0RGH &RQWUDVW %ULJKW 6KDUSQHVV &RORXU &RORXU 7HPS &RRO 1RLVH 5HG 2II 5(6(7 Setting Colour Setting Contrast Using or button select Contrast. Using or button select Colour. Press button to increase contrast level. Press button to increase colour level. Press button to decrease contrast level.
Setting Hue Setting Treble Level During Playback NTSC system, this will appear in AV mode only when NTSC video source is applied. Otherwise, Hue option is invisible in Picture menu in TV mode : Using Using or button select Hue. or button select Treble. Press button to increase treble level. Press button to decrease treble level. Setting Balance Press button to increase hue level. Press button to decrease hue level.
Press button to increase volume. Press button to decrease volume. Selecting Sound Mode or Using Mode. button select Sound Press or button to change Sound Mode. You can choose Mono, Stereo or Dual (I-II) mode, only if the selected channel supports that Sound Mode. You can also change sound mode directly pressing I-II button on your remote control. To Store The Settings In the Sound Menu, all settings are stored automatically.
In EXT mode, Install menu appears like this: Decoder(EXT-2) You can use this mode to connect any decoder to your TV. You can change only Colour system and VCR. Selecting Programme Using or button select Programme. To select programme number, you can use / button or Digit Buttons. Press the or buttons to set it On or Off.
each character of channel name. 4. Press the RED button to store the channel name. To cancel the Name mode, press the BLUE button. To delete a channel (Delete): 1. Choose the channel you want to delete. 2. Press the YELLOW button to enter the Delete mode. 3. Press the YELLOW button to delete it. To cancel the Delete mode, press the BLUE button. Program Menu is used to delete a channel, to change the programme number of a channel, to give a channel name to a channel, and to start the A.P.
Source Menu Other Features You can switch your TV to EXT modes by pressing directly to AV button or by selecting in source menu from the main menu. While in EXT mode, you can also switch your TV to TV or other EXT modes by selecting in source menu from the main menu. In main menu, firstly use or button then use / or OK button to enter Source menu.
After a Remote Control command (if No-Signal Timer is active) the timer stops and if no signal detected again the timer is initialized to 5 minutes and starts 3 seconds later again to count down. It is not valid in EXT modes. No-Signal and Out Of Range Detection (PC mode) In PC Mode, as no menu is displayed, in case that there is no PC input to the TV, it is displayed an OSD message: Picture Mode Picture mode OSD is displayed when BLUE button is pressed.
Zoom Modes Zoom mode can be changed by pressing the Red button. You can change the screen size according to the picture aspect ratio. Select the optimum one from the following ZOOM modes. AUTO: When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal or the signal from an external device, the TV automatically changes the ZOOM mode to 16:9 ZOOM mode, PANORAMIC or FULL mode according to the WSS signal.
Auto Position PC Mode Installation Power off both Computer and Display before making any connections. If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically. Select Auto position item by using buttons. or Set your PCs resolution correctly before connecting to the TV. See the table in page 29 for supported modes. Press OK button.
PC Picture Menu In the Main menu, select PC Picture using or button, then enter the PC Picture menu by pressing / or OK buttons. Contrast, Bright-1 and Colour Temperature adjustments in this menu are identical to adjustments defined in TV picture menu. R, G and B adjust the TV image colour in PC mode. You can change the TV colour to your desired colour: R (Red), G (Green), B (Blue) Press the BLUE button to reset the PC picture settings to default factory settings.
Teletext Teletext is an information system that displays text on your TV screen. Using the Teletext information system you can view a page of information on a subject that is available in the list of contents (index). On screen display is not available in text mode. Contrast, brightness or colour control is not available, but volume control is available in text mode. To operate Teletext Select a TV station on which Teletext is being transmitted. Press (TELETEXT) button.
selected page is found. Press button to display the selected Teletext page. To exit Teletext Press button. The screen will switch to TV mode. Fastext and Toptext Your TV supports the 7 page Teletext system. When the page number of any of the 7 pages in memory is entered, the system will not search for the requested page; instead it will display the page automatically. Press button to move the Teletext screen forward one page at a time.
If you have a device which outputs component signal, connect it to the EXT-3 terminal with a component video cable. Via the ANT (aerial) socket If your equipment does not have an Euroconnector or RCA jacks, connect it to the TV with an aerial cable. For details, see the manual provided with the equipment. To store the test signal that comes from the equipment, see Install Menu on page 17 and store it to the program number 0.
Antenna Connections Peripheral Equipment Connections HEADPHONE AUDIO $8',2 ,1 / 9,'(2 ,1 5 VIDEO ,1 287 ,1 $17 ,1 &$0&25'(5 FOR SATELLITE RECEIVER DECODER ENGLISH - 28 - 287
PC Input Typical Display Modes The display has a maximum resolution of 1360 x 768, vertical sync. frequency range of 50-75 Hz and a horizontal sync. frequency range of 30-69 KHz. The following table is an illustration of some of the typical video display modes.
PC Picture Tips Can not turn the TV on? Check that TV/VCR/DVD switch is set to TV position. TV may go to standby mode when you turn the TV on soon after you turn the TV off. If you can turn the TV on again, it is not a problem. Can not turn the TV off? Check that TV/VCR/DVD switch is set to TV position. Care of the Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer.
Specifications Item Model LT-26B60BU LT-26B60SU Broadcasting Systems PAL SECAM BG, DK, I, L, Lp Channels and VHF (VL) 46,25 MHz - 168,25 MHz Frequencies VHF (VH) 175,25 MHz - 463,25 MHz UHF 471,25 MHz - 863,25 MHz Cable TV (S1-S20/ S21-S41) Input Signal Video: Analog 0,7 Vp-p 75 ohm positive Sync: TTL Level positive or negative, Seperate sync. Horizontal Timing 30 - 69 KHz Vertical Timing 50 - 75 KHz Dot Rate 78.75 MHz max.