LT-Z32/26SX4B/S / LCT1732-002A / All Cover LT-Z32&26SX4BS_Eng.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 1 Monday, September 6, 2004 10:30 AM Thank you for buying this JVC LCD flat television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. (“LCD” stands for Liquid Crystal Display.) WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING ENGLISH • Fingers may be trapped under the TV causing injuries.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 2 Monday, September 6, 2004 10:30 AM Pixel defects LCDs use collections of fine points (“pixels”) to display images. While there is no problem with more than 99.99% of these pixels, please understand that a very small number of pixels may not light, or may light all the time. Distance recommendations ENGLISH Avoid improper installation and never position the unit where good ventilation is impossible.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 3 Monday, September 6, 2004 10:30 AM Cleaning the screen CAUTION: • Operate only from the power source specified (AC 110 – 240 V, 50/60 Hz) on the unit. • Avoid damaging the AC plug and power cord. • When you are not using this unit for a long period of time, it is recommended that you disconnect the power cord from the main outlet. ENGLISH The screen is coated with a special thin film to reduce reflection.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 4 Monday, September 6, 2004 10:30 AM CONTENTS ENGLISH Setting up your TV ...................................5 PICTURE menu ...................................... 25 Installation.................................................. 5 Using the stand .......................................... 5 Removing the terminal covers ................... 6 Connecting the aerial and video cassette recorder (VCR) .......................................
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 5 Monday, September 6, 2004 10:30 AM Setting up your TV • When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV. • Make sure that the TV is installed on the wall by a skilled installer. Installation ENGLISH Cautions for installation • Install the TV in a corner on a wall or on the floor so as to keep cords out of the way.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 6 Monday, September 6, 2004 10:30 AM Setting up your TV Cable holder A cable holder which is used to keep the connection cables tidy is attached to the back of the stand. Gently squeeze the left and right of the cable holder and pull it to remove it from the stand. After putting the cables in the cable holder, attach it to the back of the stand again.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 7 Monday, September 6, 2004 10:30 AM Setting up your TV Connecting the aerial and video cassette recorder (VCR) without terminal covers Caution • Turn off all the equipment including the TV before connecting anything. ENGLISH • Aerial cable is not supplied. Use a good quality 75-ohm coaxial cable. • Read the manual that came with the VCR before connecting.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 8 Monday, September 6, 2004 10:30 AM Setting up your TV Connecting the power cord to the AC outlet Insert the AC plug on the power cord from the TV into AC outlet. Caution ENGLISH • Operate only from the power source specified (AC 110 – 240 V, 50/60 Hz) on the unit. Initial settings (Setup tour) When the TV is first turned on, it goes into the initial settings mode, and you will see the JVC logo.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 9 Monday, September 6, 2004 10:30 AM Setting up your TV 3 Press the a button The LANGUAGE menu appears. 5 Press the 6 buttons to choose a group. Then press the a button The AUTO PROGRAM function starts. The TV channels you receive are automatically stored in the programme numbers (PR) list.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 10 Monday, September 6, 2004 10:30 AM TV buttons and functions 1 Turn the TV on from standby mode ENGLISH Press the A button or the CHANNEL p buttons to turn the TV on from standby mode. When the TV is turned on, the power lamp lights blue. 2 To turn the TV off: Press the A button again. The power lamp goes off. Caution • The A button on the TV does not fully isolate the TV from the AC supply.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 12 Monday, September 6, 2004 10:30 AM Remote control buttons and functions Choose a TV channel and watch images from external devices ENGLISH Use the number buttons: Enter the programme number (PR) of the channel using the number buttons. Example: • PR 6 → press 6 • PR 12 → press 1 and 2 Use the 6 p buttons: Press the 6 p buttons to choose the programme number (PR) you want or a VIDEO terminal.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 13 Monday, September 6, 2004 10:30 AM Remote control buttons and functions Adjust the volume Muting the sound Press the l (muting) button to turn off the sound. Pressing the l (muting) button again restores the previous volume level. Display function You can see the channel number of the programme you are watching or the PR LIST. From the PR LIST, you can choose a channel or VIDEO terminal.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 14 Monday, September 6, 2004 10:30 AM Remote control buttons and functions ZOOM function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes. • The ZOOM mode is fixed at FULL when you are using the TV as a PC screen.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 15 Monday, September 6, 2004 10:30 AM Remote control buttons and functions Adjusting the visible area of the picture If subtitles or the top (or bottom) of the picture are cut off, you can adjust the visible area of the picture manually. 2 Press the a button to display the ZOOM mode indicator The indicator appears.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 16 Monday, September 6, 2004 10:30 AM Remote control buttons and functions To cancel the “Freeze” function: Press the f button, the 6 p buttons or the number buttons. ENGLISH • The “Freeze” function does not work while a sub-picture is displayed. • The still picture cannot be output from the TV. • The “Freeze” function does not work for picture of PC signal.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 17 Monday, September 6, 2004 10:30 AM Remote control buttons and functions • The BLUE BACK function does not work when the “Multi-picture” function is being used. • The ZOOM function does not work when the “Multi-picture” function is being used. RETURN PLUS function and Return function The 1 button has two functions; the RETURN PLUS function and the Return function.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 18 Monday, September 6, 2004 10:30 AM Remote control buttons and functions Favourite channel function You can register your favourite TV channels (PR 1 – PR 99) in the number buttons 1 to 4. After registering, the channel can be called by pressing the d (favourite) button and a number button 1 to 4.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 19 Monday, September 6, 2004 10:30 AM Remote control buttons and functions Operating a JVC brand DVD player 1 Set the PIP/TV/DVD switch to the DVD position When you are operating the DVD player, set the switch to the DVD position. • You can turn the DVD player on or off with the # (standby) button. • You can also press the H or T button and display the DVD disc menu screen, and then operate by pressing the 7 buttons.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 20 Monday, September 6, 2004 10:30 AM Teletext function 4 Choose a teletext page by pressing the 6 p buttons, number buttons or colour buttons To return to the TV mode: Press the 4 button, b button, or g (Text) button.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 21 Monday, September 6, 2004 10:30 AM Teletext function 2 Press a colour button to choose a position. Then press the number buttons to enter the page number Sub-page Some teletext pages include sub-pages that are automatically displayed. 3 Press and hold down the A (Store) button The four page numbers blink white to show that they are stored in memory.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 22 Monday, September 6, 2004 10:30 AM Teletext function Index You can return to the index page instantly. Press the G (Index) button Returns to page 100 or a previously specified page. ENGLISH Cancel You can search for a teletext page while watching TV. 1 Press the number button to enter a page number, or press a colour button The TV searches for a teletext page. 2 Press H (Cancel) button The TV programme appears.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 23 Monday, September 6, 2004 10:30 AM Using the TV’s menu This TV has a number of functions you can operate using menus. To use all your TV’s functions, you need to understand the basic menu operating techniques fully. Types of menu PICTURE menu Choose to set the screen settings. D0106 Buttons used to operate the menus SOUND menu Choose to set the sound settings.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 24 Monday, September 6, 2004 10:30 AM Using the TV’s menu Operation with the buttons on the TV You can also operate the menus using the buttons on the front panel of the TV.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 25 Monday, September 6, 2004 10:30 AM PICTURE menu BACK LIGHT PICTURE PICTURE MODE BACK LIGHT CONTRAST BRIGHT SHARP COLOUR TINT WHITE BALANCE FEATURES STANDARD You can adjust the back light. 2 : darker 3 : brighter COOL RESET D0014-EN • While the PICTURE menu is displayed, pressing the blue button will set the BACK LIGHT, CONTRAST, BRIGHT, SHARP, COLOUR, TINT settings to their default settings.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 26 Monday, September 6, 2004 10:30 AM PICTURE menu COOL: A bluish white. Using this mode when watching bright pictures allows you to enjoy a more vivid and bright picture. MID: The normal white colour. ENGLISH WARM: A reddish white. Using this mode when watching films allows you to enjoy colours that are characteristic of films. FEATURES Choose FEATURES and press the a or 3 button to display the sub-menu.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 27 Monday, September 6, 2004 10:30 AM PICTURE menu PULL DOWN The PULL DOWN function displays a cinema film picture more smoothly and naturally on the screen. AUTO: The television automatically recognises the type of signal and turns the function on and off. ON: This function is turned on. OFF: This function is turned off.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 28 Monday, September 6, 2004 10:30 AM PICTURE menu ENGLISH 2 Press the 5 buttons to choose MAIN or SUB MAIN: You can change the colour system of the main-picture. SUB: You can change the colour system of the sub-picture. • Choose MAIN when a sub-picture is not displayed. 3 Press the 6 buttons to choose the appropriate colour system. Then press the a button PAL: PAL system SECAM: SECAM system NTSC 3.58: NTSC 3.58 MHz system NTSC 4.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 29 Monday, September 6, 2004 10:30 AM SOUND menu TREBLE SOUND STEREO/ BASS TREBLE BALANCE CINEMA SURROUND A.H.B. BBE OFF OFF OFF You can adjust the high tone of the sound. 2 : weaker 3 : strong BALANCE D0019-EN • When the headphones are connected, only “STEREO / I • II” can be used. STEREO / I • II When you are viewing a bilingual broadcast programme, you can choose the sound from Bilingual I (Sub I) or Bilingual II (Sub II).
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 30 Monday, September 6, 2004 10:30 AM SOUND menu BBE BBE function restores clarity and presence for better speech intelligibility and musical realism. ENGLISH ON: This function is turned on. OFF: This function is turned off. • Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under USP4638258, 5510752 and 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 31 Monday, September 6, 2004 10:30 AM FEATURES menu FEATURES SLEEP TIMER CHANNEL GUARD APPEARANCE BLUE BACK CHILD LOCK AUTO SHUTOFF FAVOURITE SETTING TYPE A ON OFF OFF D0023-EN SLEEP TIMER You can set the TV to automatically turn off after a set period of time. 1 Choose SLEEP TIMER. Then press the a or 3 button A Sub-menu of the SLEEP TIMER function appears.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 32 Monday, September 6, 2004 10:30 AM FEATURES menu 3 Press the a button The Sub-menu of CHANNEL GUARD appears. > CHANNEL GUARD ENGLISH PR AV 01 02 03 04 05 06 07 08 09 ID 2 Press the 5 button to display “ID NO.” (ID No. input screen) 5 CH/CC CH CH CH CH CH CH CC CC CC ID NO.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 33 Monday, September 6, 2004 10:30 AM FEATURES menu APPEARANCE Press the 5 button and choose the format in which the channel number is displayed from the four types: TYPE A, TYPE B, TYPE C, and TYPE D. BLUE BACK You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an external device. ON: This function is turned on.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 34 Monday, September 6, 2004 10:30 AM SET UP menu SET UP AUTO PROGRAM EDIT/MANUAL LANGUAGE VIDEO-1 SETTING VIDEO-3 SETTING AI VOLUME TELETEXT LANGUAGE VIDEO VIDEO OFF ENGLISH OK D0029-EN AUTO PROGRAM You can again perform the AUTO PROGRAM function TV channel automatic registration which was performed in the “Initial settings (Setup tour)” (page 8). 1 Choose AUTO PROGRAM, then press the a or 3 button The AUTO PROGRAM function starts.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 35 Monday, September 6, 2004 10:30 AM SET UP menu DELETE: This function deletes a TV channel you do not want to list. MANUAL: This function manually stores a new TV channel in a programme number (PR). • Using the MOVE, DELETE or INSERT functions rewrites the current programme numbers (PR) list. Therefore, the programme numbers (PR) of some of the TV channels will change.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 36 Monday, September 6, 2004 10:30 AM SET UP menu DELETE INSERT 1 Press the 6 buttons to choose a TV channel ENGLISH 2 Press the yellow button to delete the TV channel The TV channel is deleted from the programme numbers (PR) list.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 37 Monday, September 6, 2004 10:30 AM SET UP menu MANUAL 2 Press the blue button to activate the MANUAL function At the right side following the CH/CC number, the SYSTEM (sound system) of the TV channel appears.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 38 Monday, September 6, 2004 10:30 AM SET UP menu LANGUAGE ENGLISH The LANGUAGE setting which was performed in the “Initial settings (Setup tour)” (page 8) can be changed. You can prevent the sudden increase or decrease of sound that occurs when changing the channel to another channel. 1 Choose LANGUAGE, then press the a or 3 button A sub-menu of the LANGUAGE function appears. ON: This function is turned on.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 39 Monday, September 6, 2004 10:30 AM SET UP menu TELETEXT LANGUAGE There are four types of teletext language groups. Set the teletext language group that corresponds to the language of the teletext programme that you want to watch.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 40 Monday, September 6, 2004 10:30 AM Displaying a computer screen This TV can be used as a computer screen. Connecting to the computer ENGLISH Use a D-SUB cable to connect the TV’s PC IN terminal to the computer’s analogue RGB output terminal. If you want to listen to the sound from the computer, use an audio cable to connect the VIDEO-3 AUDIO L/R sound input terminal to the computer’s sound output terminal.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 43 Monday, September 6, 2004 10:30 AM Additional preparation Connecting headphones without terminal covers Connect the headphones with a stereo minijack (3.5 mm diameter) to the headphone jack. • No sound comes from the TV speakers when the headphones are connected. The video/sound signal of a TV channel you are viewing is always output from the OUT terminal.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 44 Monday, September 6, 2004 10:30 AM CH/CC numbers ENGLISH 44 When you want to use the INSERT function on page 36, find the CH/CC number corresponding to the Channel number of the TV channel from this table. US: The US channel numbers are the channel numbers used in the United States, Philippines, etc. CCIR: The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 45 Monday, September 6, 2004 10:30 AM Troubleshooting If a problem arises while you are using the TV, please read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if the mains plug is disconnected from the mains outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 46 Monday, September 6, 2004 10:30 AM Troubleshooting ENGLISH • When viewing images from commercially available video software products, or videos from videotapes which have been recorded improperly, the top of the image may be distorted. This is due to the condition of the video signal. There is nothing wrong with the TV.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.book Page 47 Monday, September 6, 2004 10:30 AM Specifications Model Broadcasting systems Colour systems Channels and frequencies VIDEO-2 terminal VIDEO-3 terminal (COMPONENT) OUT terminal PC IN terminal Headphone jack Dimensions (W × H × D) Weight Accessories FLOF (Fastext), TOP, WST (World Standard System) 110 - 240 V AC, 50/60 Hz 161 W (Standby: 2.8 W) Viewable area 80 cm (measured diagonally) Rated Power output: 10 W + 10 W 6.
LT-Z32/26SX4B/S / LCT1732-002A / English LT-Z32&26SX4BS_Eng.
LT-Z32/26SX4B/S / LCT1732-002A / All Cover LT-Z32&26SX4BS_Eng.