LT-Z37DX5 / LCT1961-001A / All Cover LT-Z37DX5_Eng.
LT-Z37DX5 / LCT1961-001A / All Cover LT-Z37DX5_Eng.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 1 Tuesday, September 27, 2005 5:01 PM Thank you for buying this JVC LCD flat television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. (“LCD” stands for Liquid Crystal Display.) WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING CAUTION • The TV screen may be damaged if the TV is carried as shown in the diagram below.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 2 Tuesday, September 27, 2005 5:01 PM Failure to take the following precautions may cause damage to the television or remote control. ENGLISH DO NOT block the TV’s ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) DO NOT place anything on top of the TV. (such as cosmetics or medicines, flower vases, potted plants, cups, etc.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 3 Tuesday, September 27, 2005 5:01 PM CONTENTS PICTURE menu ...................................... 24 Installation.................................................. 4 Using the stand .......................................... 4 Removing the terminal covers ................... 5 Connecting the aerial and video cassette recorder (VCR) ....................................... 6 Connecting the power cord to the AC outlet................................
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 4 Tuesday, September 27, 2005 5:01 PM Setting up your TV • When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV. • Make sure that the TV is installed on the wall by a skilled installer. Installation ENGLISH Cautions for installation • Install the TV in a corner on a wall or on the floor so as to keep cords out of the way. • The TV will generate a slight amount of heat during operation.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 5 Tuesday, September 27, 2005 5:01 PM Setting up your TV Removing the terminal covers There are connection terminals behind the covers on the left and right of the rear of the TV. Remove these two covers before connecting an antenna or VCR. Remove the covers by removing the hooks. When replacing the covers, place the side of the covers against the TV and insert the hooks. ENGLISH • Leave the covers off if they do not fit properly.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 6 Tuesday, September 27, 2005 5:01 PM Setting up your TV Connecting the aerial and video cassette recorder (VCR) without terminal covers Caution • Turn off all the equipment including the TV before connecting anything. ENGLISH • Aerial cable is not supplied. Use a good quality 75-ohm coaxial cable. • Read the manual that came with the VCR before connecting.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 7 Tuesday, September 27, 2005 5:01 PM Setting up your TV Connecting the power cord to the AC outlet Insert the AC plug on the power cord from the TV into AC outlet. Caution Initial settings (Setup tour) When the TV is first turned on, it goes into the initial settings mode, and you will see the JVC logo. Follow the instructions on the screen display to make the initial settings.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 8 Tuesday, September 27, 2005 5:01 PM Setting up your TV ENGLISH • If the JVC logo does not appear this is because your TV has already been turned on for the first time: use the “LANGUAGE”, “TELETEXT LANGUAGE” and “AUTO PROGRAM” functions to make the initial settings. For details, see “SET UP menu” on page 34. 3 Press the a button The LANGUAGE menu appears. 5 Press the 6 buttons to choose a group.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 9 Tuesday, September 27, 2005 5:01 PM TV buttons and functions Turn the TV on from standby mode To turn the TV off: Press the A button again. The power lamp goes off. ENGLISH Press the A button or the CHANNEL p buttons to turn the TV on from standby mode. When the TV is turned on, the power lamp lights blue. Caution • The A button on the TV does not fully isolate the TV from the AC supply.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 11 Tuesday, September 27, 2005 5:01 PM Remote control buttons and functions Choose a TV channel and watch images from external devices Example: • PR 6 → press 6 • PR 12 → press 1 and 2 Use the 6 p buttons: Press the 6 p buttons to choose the programme number (PR) you want or a VIDEO terminal. Use the 4 button: Press the 4 button to choose a VIDEO terminal.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 12 Tuesday, September 27, 2005 5:01 PM Remote control buttons and functions Adjust the volume ENGLISH Press the 7 q buttons to adjust the volume. The volume level indicator appears and the volume changes as you press the 7 q buttons. Muting the sound Press the l (muting) button to turn off the sound. Pressing the l (muting) button again restores the previous volume level.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 13 Tuesday, September 27, 2005 5:01 PM Remote control buttons and functions ZOOM function PANORAMIC: This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the screen, without making the picture appear unnatural. • The top and bottom of the picture are slightly cut off. 14:9 ZOOM: This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 14 Tuesday, September 27, 2005 5:01 PM Remote control buttons and functions Adjusting the visible area of the picture If subtitles or the top (or bottom) of the picture are cut off, you can adjust the visible area of the picture manually. ENGLISH 1 Press the c button The ZOOM menu appears. 2 Press the a button to display the ZOOM mode indicator The indicator appears.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 15 Tuesday, September 27, 2005 5:01 PM Remote control buttons and functions To cancel the “Freeze” function: Press the f button, the 6 p buttons or the number buttons. Using the “Multi-picture” function 1 Set the PIP/TV/DVD switch to the PIP position When using the “Multi-picture” function, set the PIP/TV/DVD switch to the PIP position. 2 Press the X button The “Multi-picture” menu appears.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 16 Tuesday, September 27, 2005 5:01 PM Remote control buttons and functions ENGLISH • The “Multi-picture” function does not work for a PC signals. • When set to 12-pictures multi, press the 7 buttons to choose the screen you want to view and the press the a button to display that picture on the whole screen. • The BLUE BACK function does not work when the “Multi-picture” function is being used.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 17 Tuesday, September 27, 2005 5:01 PM Remote control buttons and functions Favourite channel function You can register your favourite TV channels (PR 1 – PR 99) in the number buttons 1 to 4. After registering, the channel can be called by pressing the d (favourite) button and a number button 1 to 4.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 18 Tuesday, September 27, 2005 5:01 PM Remote control buttons and functions Operating a JVC brand DVD player ENGLISH These buttons will operate a JVC brand DVD player. Pressing a button that looks the same as the device’s original remote control button has the same effect as the original remote control. 1 Set the PIP/TV/DVD switch to the DVD position When you are operating the DVD player, set the switch to the DVD position.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 19 Tuesday, September 27, 2005 5:01 PM Teletext function 4 Choose a teletext page by pressing the 6 p buttons, number buttons or colour buttons To return to the TV mode: Press the 4 button, b button, or g (Text) button. Basic operation 1 Choose a TV channel with a teletext broadcast 2 Set the PIP/TV/DVD switch to the TV position • If you have trouble receiving teletext broadcasts, consult your local dealer or the teletext station.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 20 Tuesday, September 27, 2005 5:01 PM Teletext function 2 Press a colour button to choose a position. Then press the number buttons to enter the page number Sub-page Some teletext pages include sub-pages that are automatically displayed. ENGLISH 1 Choose a teletext page that includes sub-pages Sub-page numbers that can be viewed are automatically displayed at the top of the screen.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 21 Tuesday, September 27, 2005 5:01 PM Teletext function Index You can return to the index page instantly. Press the G (Index) button Returns to page 100 or a previously specified page. You can search for a teletext page while watching TV. ENGLISH Cancel 1 Press the number button to enter a page number, or press a colour button The TV searches for a teletext page. 2 Press H (Cancel) button The TV programme appears.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 22 Tuesday, September 27, 2005 5:01 PM Using the TV’s menu This TV has a number of functions you can operate using menus. To use all your TV’s functions, you need to understand the basic menu operating techniques fully. Types of menu PICTURE menu Choose to set the screen settings. D0106 Buttons used to operate the menus SOUND menu Choose to set the sound settings.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 23 Tuesday, September 27, 2005 5:01 PM Using the TV’s menu Operation with the buttons on the TV You can also operate the menus using the buttons on the front panel of the TV.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 24 Tuesday, September 27, 2005 5:01 PM PICTURE menu BACK LIGHT PICTURE PICTURE MODE BACK LIGHT CONTRAST BRIGHT SHARP COLOUR TINT WHITE BALANCE FEATURES STANDARD COOL RESET ENGLISH OK D0014-EN • While the PICTURE menu is displayed, pressing the blue button will set the BACK LIGHT, CONTRAST, BRIGHT, SHARP, COLOUR, TINT settings to their default settings.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 25 Tuesday, September 27, 2005 5:01 PM PICTURE menu COOL: A bluish white. Using this mode when watching bright pictures allows you to enjoy a more vivid and bright picture. MID: The normal white colour. FEATURES Choose FEATURES and press the a or 3 button to display the sub-menu.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 26 Tuesday, September 27, 2005 5:01 PM PICTURE menu ENGLISH AUTO: The TV will automatically adjust the level of the DigiPure effect to match the amount of noise in the picture, giving the best possible picture. MIN: The level of DigiPure effect is set to the minimum. When you set the Super DigiPure function to AUTO and notice some noise, change the setting from AUTO to MIN.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 27 Tuesday, September 27, 2005 5:01 PM PICTURE menu 3 Press the 6 buttons to choose the appropriate colour system. Then press the a button PAL: PAL system SECAM: SECAM system NTSC 3.58: NTSC 3.58 MHz system NTSC 4.43: NTSC 4.43 MHz system AUTO: This function detects a colour system from the input signal. • The AUTO function may not function properly if you have poor signal quality.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 28 Tuesday, September 27, 2005 5:01 PM SOUND menu TREBLE SOUND STEREO/ BASS TREBLE BALANCE CINEMA SURROUND A.H.B. BBE OFF OFF OFF You can adjust the high tone of the sound. 2 : weaker 3 : strong BALANCE ENGLISH OK D0019-EN • When the headphones are connected, only “STEREO / I • II” can be used. STEREO / I • II When you are viewing a bilingual broadcast programme, you can choose the sound from Bilingual I (Sub I) or Bilingual II (Sub II).
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 29 Tuesday, September 27, 2005 5:01 PM SOUND menu BBE BBE function restores clarity and presence for better speech intelligibility and musical realism. OFF: This function is turned off. ENGLISH ON: This function is turned on. • Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under USP4638258, 5510752 and 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 30 Tuesday, September 27, 2005 5:01 PM FEATURES menu FEATURES SLEEP TIMER CHANNEL GUARD APPEARANCE BLUE BACK CHILD LOCK AUTO SHUTOFF FAVOURITE SETTING ILLUMINATION MEDIA CARD VIEWER TYPE A ON OFF OFF OFF ENGLISH OK D0023-EN SLEEP TIMER You can set the TV to automatically turn off after a set period of time. 1 Choose SLEEP TIMER. Then press the a or 3 button A Sub-menu of the SLEEP TIMER function appears.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 31 Tuesday, September 27, 2005 5:01 PM FEATURES menu 3 Press the a button The Sub-menu of CHANNEL GUARD appears. > CHANNEL GUARD ID 5 CH/CC CH CH CH CH CH CH CC CC CC ID NO. : 21 22 23 24 25 26 01 02 03 D0028-EN GUARD 3 Press the number buttons to enter the ID number The lock is temporarily released so you can view the TV channel. ENGLISH PR AV 01 02 03 04 05 06 07 08 09 2 Press the 5 button to display “ID NO.” (ID No.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 32 Tuesday, September 27, 2005 5:01 PM FEATURES menu APPEARANCE Press the 5 button and choose the format in which the channel number is displayed from the four types: TYPE A, TYPE B, TYPE C, and TYPE D. ENGLISH • Set to TYPE D when shipped from factory. TYPE D sets all screens to semitransparent. The menu screens are not semitransparent when set to a type other than TYPE D.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 33 Tuesday, September 27, 2005 5:01 PM FEATURES menu ILLUMINATION You can choose one of three ILLUMINATION modes to adjust the illumination settings. BRIGHT: Heightens illumination lights. OFF: This function is turned off. ENGLISH SOFT: Softens illumination lights. • For the location of the illumination lamp, refer to page 9.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 34 Tuesday, September 27, 2005 5:01 PM SET UP menu SET UP AUTO PROGRAM EDIT/MANUAL LANGUAGE VIDEO-1 SETTING VIDEO-3 SETTING AI VOLUME TELETEXT LANGUAGE HDMI SETTING VIDEO VIDEO OFF ENGLISH OK D0029-EN AUTO PROGRAM You can again perform the AUTO PROGRAM function TV channel automatic registration which was performed in the “Initial settings (Setup tour)” (page 7).
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 35 Tuesday, September 27, 2005 5:01 PM SET UP menu DELETE: This function deletes a TV channel you do not want to list. MANUAL: This function manually stores a new TV channel in a programme number (PR). • Using the MOVE, DELETE or INSERT functions rewrites the current programme numbers (PR) list. Therefore, the programme numbers (PR) of some of the TV channels will change.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 36 Tuesday, September 27, 2005 5:01 PM SET UP menu DELETE INSERT 1 Press the 6 buttons to choose a TV channel ENGLISH 2 Press the yellow button to delete the TV channel The TV channel is deleted from the programme numbers (PR) list.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 37 Tuesday, September 27, 2005 5:01 PM SET UP menu MANUAL 2 Press the blue button to activate the MANUAL function At the right side following the CH/CC number, the SYSTEM (sound system) of the TV channel appears.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 38 Tuesday, September 27, 2005 5:01 PM SET UP menu LANGUAGE ENGLISH The LANGUAGE setting which was performed in the “Initial settings (Setup tour)” (page 7) can be changed. You can prevent the sudden increase or decrease of sound that occurs when changing the channel to another channel. 1 Choose LANGUAGE, then press the a or 3 button A sub-menu of the LANGUAGE function appears. ON: This function is turned on.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 39 Tuesday, September 27, 2005 5:01 PM SET UP menu TELETEXT LANGUAGE There are four types of teletext language groups. Set the teletext language group that corresponds to the language of the teletext programme that you want to watch. > TELETEXT LANGUAGE This function is used if you have a DVI or HDMI compatible device connected to your TV. For details, see “Using the HDMI terminal” on page 49.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 40 Tuesday, September 27, 2005 5:01 PM Displaying a computer screen This TV can be used as a computer screen. Connecting to the computer ENGLISH Use a D-SUB cable to connect the TV’s PC IN terminal to the computer’s analogue RGB output terminal. If you want to listen to the sound from the computer, use an audio cable to connect the VIDEO-3 AUDIO L/R sound input terminal to the computer’s sound output terminal.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 41 Tuesday, September 27, 2005 5:01 PM Using a Media Card By inserting a media card into the TV, you can easily view photos taken with a digital camera or videos taken with a JVC digital media camera “Everio”.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 42 Tuesday, September 27, 2005 5:01 PM Using a Media Card Inserting the Media Card Open the door on the left side panel by gently pushing the “PUSH-OPEN” on the door and insert the Media Card. Once you have inserted the media card, the message “PLEASE CLOSE THE DOOR” will appear on the screen. Then, close the door. MEDIA CARD VIEWER will start up. Follow the description “Using the MEDIA CARD VIEWER” on page 43.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 43 Tuesday, September 27, 2005 5:01 PM Using a Media Card Using the MEDIA CARD VIEWER SELECT ONE AND PRESS OK: VIDEO FILE D5006-EN If you have two media cards inserted in the card slot: Select the card you want to view from the menu below. SELECT ONE AND PRESS OK: SD Card COMPACT FLASH D5010-EN If there are no files: Following message will be displayed.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 44 Tuesday, September 27, 2005 5:01 PM Using a Media Card PHOTO VIDEO 1 Choose PHOTO. Then press the a button 1 Choose VIDEO. Then press the a button CF CF ENGLISH D5012-EN 2 Press the 7 buttons to choose the image. Then press the a button The slide show starts. D5021-EN 2 Press the 7 buttons to choose the image. Then press the a button The video show starts. To pause: Press the a button. To play again, press the a button.
LT-Z37DX5 / LCT1961-001A / English Body_Eng.fm Page 45 Wednesday, September 28, 2005 10:57 AM Using a Media Card FILE 1 Choose FILE. Then press the a button The FILE LIBRARY menu appears. FILE LIBRARY ENGLISH CARD JVC01 JVC02 JVC03 JVC04 JVC05 JVC06 JVC07 Folder : CARD SD 0000/0007 D5015-EN 2 Press the 6 buttons to choose the folder in the left frame. Then press the a button FILE LIBRARY ..
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 46 Tuesday, September 27, 2005 5:01 PM Additional preparation Connecting external equipment ENGLISH Connect the equipment to the TV, making the correct rear panel and front panel connections. Before connecting anything: • Read the manuals that came with the equipment. Depending on the equipment, the connection method may be different from the diagram. Also, the equipment settings may need to change depending on the connection method.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 48 Tuesday, September 27, 2005 5:01 PM Additional preparation Connecting headphones without terminal covers Connect the headphones with a stereo minijack (3.5 mm diameter) to the headphone jack. • No sound comes from the TV speakers when the headphones are connected. ENGLISH TV output from the OUT terminal The video/sound signal of a TV channel you are viewing is always output from the OUT terminal.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 49 Tuesday, September 27, 2005 5:01 PM Additional preparation Using the HDMI terminal Connecting a HDMI compatible device HDMI compatible device DIGITAL OUT ENGLISH Connecting a HDMI compatible device such as a DVD player or DVR allows you to display high definition pictures on your TV in their digital form. Connect the HDMI cable from the digital out on the back of your HDMI device to the HDMI terminal on the back of the TV.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 50 Tuesday, September 27, 2005 5:01 PM Additional preparation 2 Press the 6 buttons and choose SIZE or AUDIO • SIZE can only be chosen when the picture signal is VGA or 480p. ENGLISH 50 When setting SIZE: This option adjusts the position when a VGA or 480p picture signal is being displayed on the screen. If the displayed picture is slightly shifted, the position can be adjusted by choosing 1, 2 or AUTO.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 52 Tuesday, September 27, 2005 5:01 PM Troubleshooting If a problem arises while you are using the TV, please read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if the mains plug is disconnected from the mains outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.book Page 53 Tuesday, September 27, 2005 5:01 PM Troubleshooting Poor sound • Have you adjusted BASS or TREBLE properly? If not, follow the description “BASS” or “TREBLE” on page 28. • When TV channel reception is poor, it can be hard to hear stereo or bilingual sound. In this case, follow the description “STEREO / I • II” on page 28 to hear the sound more easily by changing it to a mono sound.
LT-Z37DX5 / LCT1961-001A / English LT-Z37DX5_Eng.
LT-Z37DX5 / LCT1961-001A / All Cover LT-Z37DX5_Eng.
LT-Z37DX5 / LCT1961-001A / All Cover LT-Z37DX5_Eng.
LT-Z37DX5 / LCT1961-001A / All Cover LT-Z37DX5_Eng.
LT-Z37DX5 / LCT1961-001A / All Cover LT-Z37DX5_Eng.