ENGLISH DVD/CD RECEIVER !"=DVD/CD DVD/CD ‡§√◊ËÕ߇≈Ëπ DVD/CD KD-DV5000 Detachable AUDIO SUBTITLE ANGLE ATT COMPACT DVD DUAL ZONE DIGITAL VIDEO FM DAB ‰∑¬ FOLDER PRESET AM TOP MENU CH MENU 1 + 2 3 DISC + SRC KD-DV5000 50Wx4 ENTER 4 2ndVOL 5 DISC – SEL SETUP 2ndVOL RANDOM INTRO – R I 7 6 RETURN 8 10 9 REPEAT ATT 0 MODE +10 DISP SHIFT S EQ ZOOM SEL OSD 1 2 3 4 5 6 M D EQ This unit is equipped with the display demonstration.
ENGLISH Position And Reproduction Of Labels Bottom panel of the main unit CAUTION: Invisible laser ADVARSEL: Usynlig laserradiation when open and stråling ved åbning, når interlock failedor defeated. sikkerhedsafbrydere er ude AVOID DIRECT EXPOSURE af funktion. Undgåudsæt(d) TO BEAM. (e) telse for stråling. VARNING: Osynlig laserstrålning när denna del är öppnad och spärren är urkopplad. Betrakta ej strålen. (s) VARO: Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle.
ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. WARNINGS • DO NOT install any unit in locations where; – it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident. – it may obstruct the operation of safety devices such as air bags, as this may result in a fatal accident. – it may obstruct visibility.
ENGLISH CONTENTS How to reset your unit ............................... 2 DVD SETUP MENU ......................... 43 LOCATION OF THE BUTTONS ............ 5 Basic setting procedure ............................ 43 Control panel ............................................. Remote controller ...................................... Preparing the remote controller ................ 5 6 7 SOUND ADJUSTMENTS ................... 47 BASIC OPERATIONS ....................... 8 Turning on the power ..........
LOCATION OF THE BUTTONS 1 2 3 SRC 4 5 6 ENGLISH Control panel 7 KD-DV5000 50Wx4 ATT MODE DISP 1 SEL 8 2 3 4 9 5 6 p Refer to the pages in parentheses for details. 1 SRC (source) button (8, 57, 59, 65) 2 • (standby/on/attenuator) button (8) • Control dial 3 Display window 4 Remote sensor 5 5 (up) button • Functions as the Play button for DVDs and VCDs.
ENGLISH Remote controller AUDIO 1 SUBTITLE 7 8 ANGLE ATT 9 p DVD DUAL ZONE FM DAB 2 q FOLDER PRESET AM CH TOP MENU 1 + 3 4 w e MENU 2 3 DISC + r ENTER 4 2ndVOL 5 DISC – 6 RETURN t SEL SETUP 2ndVOL RANDOM INTRO – R I 7 8 10 9 REPEAT y 0 +10 SHIFT 5 S EQ ZOOM OSD u i 6 IMPORTANT: If “Dual Zone” is turned on (see page 30), the remote controller only functions for operating the DVD/CD player. Refer to the pages in parentheses for details.
Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. 3. Return the battery holder. ENGLISH Preparing the remote controller Insert again the battery holder pushing it until you hear a clicking sound. (back side) Remote sensor MODE DISP 5 6 M D EQ • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).
ENGLISH BASIC OPERATIONS SRC ATT MODE DISP SEL 1 2 3 4 5 6 M D EQ 2 1, 3 Turning on the power 1 3 Adjust the volume. Turn on the power. ATT Volume level appears. ATT Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 Select the source. SRC TUNER Each time you press the button, the source changes as follows.
When shipped from the factory, display demonstration has been activated, and starts automatically when no operations are done for about 20 seconds. • It is recommended to cancel the demonstration before you use the unit for the first time. To cancel the display demonstration, follow the procedure below: 1 Setting the clock You can also set the clock system to 24 hours or 12 hours. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.
ENGLISH 5 Set the clock system. Meter 1: 1 Select “24H/12H.” 2 Adjust “24Hours” or “12Hours.” The audio level meter fluctuates vertically. 1 2 ATT 6 Meter 2: Finish the setting. The speaker on the display vibrates as input audio level changes. SEL To check the current clock time when the unit is turned off, press DISP (D). The power turns on and the clock time is shown for about 5 seconds, then the power turns off.
ENGLISH RADIO OPERATIONS SRC ATT MODE DISP 1 SEL 2 3 4 5 M EQ D Note: This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast. The operations of this section are mainly explained using the buttons on the control panel. When the remote controller can be used for the same operations, it is then explained. 2 Listening to the radio 6 Start searching for a station.
ENGLISH Searching for a station manually: Manual search 1 When an FM stereo broadcast is hard to receive: MODE 1 Press MODE (M) to enter the Select the band (FM1 – 3, AM). SRC 1 Press SRC (source) repeatedly to select the tuner. 2 Press and hold SRC. Each time you press and hold the button, the band changes. FM1 FM2 FM3 AM functions mode while listening to an FM stereo broadcast. “Mode” appears on the display. M 2 Press number button 1 to select “Mono On” while “Mode” is still on the display.
2 Press and hold number button 5 while “Mode” is still on the display. You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strongstation Sequential Memory) • Manual preset of both FM and AM stations 1 2 3 4 5 ENGLISH Storing stations in memory 6 FM station automatic preset: SSM Then You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3). 1 Select the FM band (FM1 – 3) you want to store FM stations into.
ENGLISH 2 Tune in to a station (in this example, of 92.5 MHz). To tune in to stations of higher frequencies To tune in to stations of lower frequencies Tuning in to a preset station You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 13 and 14. Selecting a preset station directly 1 Select the band (FM1 – 3, AM). 1 Press SRC (source) repeatedly to select the tuner.
Changing the display pattern If you forget which stations are stored in which preset numbers, you can check the preset station list, then select your desired station. By pressing DISP (D), you can change the information shown on the display. Each time you press the button, DISP the display patterns change as D follows: 1 Select the band (FM1 – 3, AM). ENGLISH Selecting a preset station using the preset station list 1 Press SRC (source) repeatedly to select the tuner. SRC 2 Press and hold SRC.
PLAYABLE DISCS ENGLISH Discs you can play: Disc Type Mark (Logo) Video Format Region Code* 3 ALL DVD Video NTSC/PAL COMPACT Video CD DIGITAL VIDEO Audio CD MP3 disc CD-Rs or CD-RWs including MP3 files with the file extension code . They must be recorded in the format compliant with ISO 9660 Level 1, ISO 9660 Level 2, Romeo, and Joliet. • On some discs, the actual operations may be different from what is explained in this manual.
MP3 discs MP3 is an abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. MP3 is simply a file format with a data compression. By using MP3 format, one CD-R or CD-RW can contain 10 times as much data as a regular CD can. On an MP3 disc, files (also called “tracks” and both words are used interchangeably in this manual) are usually grouped into a folder. Folders can also include other folders, creating hierarchical layers of folders.
ENGLISH BASIC DISC PLAYBACK SRC ATT MODE DISP SEL 1 2 3 The following marks used in this manual indicate the playable discs. 4 5 6 M D EQ Starting playback 1 Open the control panel. Disc loading lamp DVD Video Video CD with/without PBC Audio CD MP3 disc Video CD with PBC All discs listed here Before performing any operations, make sure the following.... • To watch the playback pictures, select the an appropriate video system (NTSC or PAL) to match it to the connected monitor.
• Display indications when inserting an MP3 disc 1 1 2 4 3 1 Total title number 2 Elapsed playing time of the current title 3 Current title number and chapter number • Display indications when inserting a VCD or CD: 1 2 3 4 5 ENGLISH • Display indications when inserting a DVD: 3 2 5 Total track number Total folder number MP3 indicator Elapsed playing time of the current track Current folder number and track number Note: When a new folder starts playing, its folder name is shown on the display
ENGLISH To stop playback temporarily To stop playback Press 8 on the remote controller. “Pause” flashes on the display. Frame by Frame Playback—You can advance the still picture frame by frame by pressing the 8 repeatedly. To resume normal speed, press 3. Press 7 on the remote controller. • Except for MP3 discs: This unit can remember the end point (until the disc is ejected), and when you start playback again, playback begins from where it has been stopped.
• For DVD: During play or pause—select a chapter While stopped—select a title • For VCD: While PBC (see page 24) is not in use. From the remote controller: While holding SHIFT (S), press number buttons to select a title, chapter, or track number you want. TOP MENU MENU 1 SHIFT 2 3 On-screen guide icons During play, the following guide icons may appear for a while on the monitor. : Appears at the beginning of a scene containing multi-subtitle languages (for DVD only).
DVD/VCD SPECIAL FUNCTIONS ENGLISH Selecting subtitles While playing a disc containing subtitles in different languages, you can select which subtitle to display. • You can also set your favorite subtitle language as the initial language shown on the monitor. (See pages 43 to 45.) Select a desired subtitle language. The following pop-up window appears on the monitor. Each time you press the button, the subtitle language changes.
For DVD: While playing a disc containing multiple audio languages (ex. English, French, Spanish), you can select the language to listen to. • You can also set your favorite language as the initial audio language. (See pages 43 to 45.) Selecting multi-angle views While playing a disc containing multi-angle views, you can view the same scene at different angles. Select a desired view angle. The following pop-up window appears on the monitor. Each time you press the button, the view angle changes.
ENGLISH Menu operations While playing a VCD: Menu-driven playback is possible while playing back a DVD with menu-driven features or a VCD with the PBC (PlayBack Control) function. The PBC (PlayBack Control) function allows you to operate the VCD using menus. When you start playback, a menu will automatically appear on the monitor. • A menu may be a list of items, divided screens, or some moving pictures. While playing a DVD: Select the item you want from the menu.
Move the zoomed-in portion on the monitor. 2 You can zoom into a particular portion of the picture while playing a DVD or VCD. 1 DISC + 4 ENGLISH 2 Zoom in 6 DISC – 8 Zoom in to the picture. The pop-up window appears on the monitor to show the current magnification. Each time you press the button, magnification change as follows: ZOOM ZOOM x4 \x2\x4\x8\x1\x2\x4\ x8\•••• Ex. When “ZOOM x4” is selected Note: While zoomed in, the picture may look coarse.
ENGLISH ADVANCED DISC OPERATIONS AUDIO SUBTITLE ANGLE ATT DVD DUAL ZONE FM DAB 1¡ FOLDER PRESET AM ENTER CH TOP MENU MENU 1 + Number 2 3 Cursor Time Search REPEAT You can start playing a particular point by specifying the elapsed playing time of the current title (for DVD) and of the disc (CD and VCD). DISC + ENTER 4 2ndVOL 5 DISC – SEL SETUP 2ndVOL RANDOM INTRO – R I 7 6 RETURN 8 10 9 REPEAT 0 +10 SHIFT SHIFT (S) S Notes: * “x60” is only for DVD.
Move to CHAP. (Chapter Search), then press ENTER. ENGLISH 2 Example (for DVD VIDEO) To play back from 2(H):34(M):00(S) Press number buttons 2, 3, then 4. ENTER TIME 2 : 34 :_ _ 4 6 To play back from 58(M):00(S) Press number buttons 0, 5, then 8. 5 5.1ch OFF TIME 0 : 58 :_ _ CHAPTER Example (for Video CD/Audio CD) To play back from 23(M):40(S) Press number buttons 2, 3, then 4. TITLE 33 CHAP 33 CHAP. 1/3 3 You do not have to press “0” to enter the trailing zeros.
ENGLISH Playing in various play modes You can use any of three methods to activate various play modes. • Using the direct buttons on the remote controller. • Using the on-screen bar (see page 32). • Using the buttons on the control panel (see page 38). In the following explanation, how to use the direct buttons on the remote controller is explained. • For VCD/CD: TRACK OFF • TRACK: Current (or specified) track will be repeated. TRACK indicator appears • on the monitor.
Intro Scan You can play back tracks on a disc (or in a folder for MP3 discs) at random. You can play back the first 15 seconds of each track sequentially. • For VCD: While PBC (see page 24) is not in use. Select the random mode you want. RANDOM R 10 The menu bar icon appears on the monitor to show the selected mode. Each time you press the button, the random mode changes as follows: ENGLISH Random Play • For VCD: While PBC (see page 24) is not in use. Select the intro scan mode you want.
DUAL ZONE OPERATIONS ENGLISH Listening with headphones AUDIO SUBTITLE By connecting headphones to the 2nd AUDIO OUT plug on the rear, you can listen to the playback sound through the DVD/CD player while listening to another source (except AM) through the speakers. You can activate Dual Zone while listening to any source. • You can operate the DVD/CD player using the remote controller.
Adjust the headphone volume through the 2nd AUDIO OUT plug. + SHIFT 2ndVOL S 2ndVOL – 3 To cancel Dual Zone operations, repeat steps 1 and 2 (“Dual Zone Off” appears on the display.) Operate the DVD/CD player using the remote controller by referring to the monitor screen. • When Dual Zone is in use, you can only operate the DVD/CD player using the remote controller. To control the other sources (except AM) while Dual Zone is activated, use the buttons on the control panel.
ENGLISH OSD DISC OPERATIONS AUDIO SUBTITLE Operations on the monitor screen ANGLE ATT DVD 4¢ DUAL ZONE FM DAB FOLDER PRESET FOLDER AM ENTER Basic procedure for DVD, VCD and CD TOP MENU CH MENU 1 + Number You can show the on-screen bar on the monitor, and operate the disc using the on-screen bar. 2 1 3 DISC + Cursor 4 2ndVOL 5 DISC – SEL SETUP 2ndVOL RANDOM INTRO – R I 7 9 REPEAT 0 Note: When you start playing a CD, the status bar automatically appears.
Select the Repeat Play modes. Each time you press cursor 5 or ∞ in step 4, the repeat mode changes. • For available repeat modes, see page 28. Move to an item on the menu bar, then press ENTER. ENTER 4 6 5 Activate Time Search. Press the number buttons to enter the elapsed time to a particular point in step 4. • For details, see page 26. The pull-down window for the selected items appears. 5.1ch TITLE 33 CHAP 33 CHAP. OFF 1/3 TOTAL 1:25:58 1/5 1/3 Ex.
ENGLISH Basic procedure for MP3 discs Operations from the remote controller: While playing an MP3 disc, the following MP3 CONTROL screen always shows on the monitor. By referring to this screen, you can easily operate the MP3 disc. • Up to 32 characters can be shown for the file names on the monitor, while 64 characters on the display of the receiver. • For more details about MP3 discs, refer to “A Guide to MP3” (separate volume).
ENGLISH OTHER DISC OPERATIONS SRC ATT MODE DISP 1 SEL 2 3 In this section, you can learn how to use the buttons on the control panel in order to operate the DVD/CD player. 4 5 6 M D EQ To fast-forward or reverse the chapter/ track (Forward/Reverse Search) Press and hold ¢ , while playing a disc, to fast-forward the chapter/track. The search speed changes: x2 \ x10. Basic disc playback To stop playback Press ∞ (down).
ENGLISH Locating a title/chapter/track on a disc To locate a particular title/chapter/track directly While playing a DVD: While playing a VCD or CD: • For DVD: During play or pause—select a chapter While stopped—select a title • For VCD: While PBC (see page 24) is not in use. While playing an MP3 disc: 1 2 3 4 5 6 Press the number button corresponding to the title/chapter/track number to start its playback. • To select a number from 1 – 6: Press 1 (7) – 6 (12) briefly.
Selecting a folder/track to play using the lists • Ex. 1: To select chapter/track number 32 while playing chapter/track number 6 MODE You can show the folder name and track name lists on the display while playing a disc, then select the folder or track you want. M Chapter/ track 6 (Three times) (Twice) \ 10 \ 20 \ 30 \ 31 \ 32 • Ex.
ENGLISH To select a track and start playback Selecting playback modes 1 Repeat Play Press and hold 5 (up) or ∞ (down) so that the folder name list of the inserted disc appears on the display. The name of the currently playing folder will be highlighted on the display. You can repeat a title, chapter, track, or disc. • For DVD: During play or pause. • For VCD: While PBC (see page 24) is not in use. MODE 1 Press MODE (M) to enter the Current folder number M functions mode.
Chapter Off Title • Chapter: Current (or specified) chapter will be repeated. • indicator appears on the display. • Title: Current title will be repeated. • indicator appears on the display. • Off: Repeat Play is canceled. To cancel Repeat Play, select “Repeat Off” by pressing number button 2 repeatedly or press number button 4 in step 2. Notes: • On some DVDs, Repeat Play may be canceled by the disc itself. • On CD, VCD, and MP3 discs, Repeat Play mode cannot be turned off.
ENGLISH • For CD: 2 Press number button 1, while “Mode” is still Disc on the display. Each time you press the button, Intro Scan play mode changes as follows: Off • Disc: All the tracks in the disc will be played at random. • indicator appears on the display. • Off: Random Play is canceled. 1 • For MP3: Off • Folder: • Disc: • Off: 3 4 5 6 Ex. While playing a CD Disc Folder 2 • For CD: All the tracks in the folder will be played at random, then move to the next folder and so on.
Changing the display pattern You can prohibit disc ejection and can lock a disc in the loading slot. By pressing DISP (D), you can change the information shown on the display. • If the information cannot be shown at a time, it will scroll on the display. Some characters or symbols will not be shown (will be blanked or substituted) on the display. While pressing SRC, press and hold for more than 2 seconds.
This page is from 1105 While playing an MP3 disc: ENGLISH While playing a CD Text (or CD): Clock time Clock time The above diagram shows examples of the display when “Tag” is set to “Off.” Notes: • When the disc title/performer is shown, the (disc) indicator lights up. When the track title is shown, the (track) indicator lights up. • If no name is assigned to the conventional CD, “NO NAME” will appear. To assign a name to a conventional CD, see page 57.
DVD Basic setting procedure AUDIO SUBTITLE 1 ANGLE ATT Show the Setup menu (LANGUAGE menu) on the monitor. LANGUAGE SETUP DVD 7 DUAL ZONE FM DAB FOLDER PRESET MENU LANGUAGE ENGLISH AUDIO LANGUAGE ENGLISH SUBTITLE ENGLISH ENGLISH DVD SETUP MENU ON SCREEN LANGUAGE ENGLISH AM CH ENTER 2 TOP MENU MENU 1 2 DISC + Cursor + ENTER 4 2ndVOL 5 DISC – SETUP 3 Select which Setup menu screen you want to use.
DVD ENGLISH 5 Move option. (cursor) to select an Repeat steps 3 to 6. AUDIO 2 DIGITAL AUDIO OUTPUT DISC + STREAM/PCM STEREO ANALOG DOWN MIX DOLBY SURROUND STEREO D. RANGE COMPRESSION ON DISC – To set other items on other menu screens Repeat steps 2 to 6. 8 6 To set other items on the same menu screen Confirm and enter your selection. AUDIO 5 To return to the normal screen Press SETUP. ENTER DIGITAL AUDIO OUTPUT STREAM/PCM ANALOG DOWN MIX DOLBY SURROUND D.
Items MENU LANGUAGE *1 For what and options Select the initial disc menu language. ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN, ITALIAN, JAPANESE, and language codes from AA to ZU (see page 67). AUDIO LANGUAGE *1 ENGLISH DVD Select the initial audio language. LANGUAGE ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN, ITALIAN, JAPANESE, and language codes from AA to ZU (see page 67). SUBTITLE *1 Select the initial subtitle language.
DVD ENGLISH Items For what and options DIGITAL AUDIO OUTPUT Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal on the rear. AUDIO • PCM ONLY Select this when connecting an amplifier or a decoder incompatible with Dolby Digital and DTS, or connecting to a recording device. • DOLBY DIGITAL/PCM Select this when connecting an amplifier or a decoder compatible with Dolby Digital.
Operations of this section are explained using the buttons on the control panel unless mentioned otherwise. Adjusting the sound 2 Make adjustments. • To adjust fader and balance—Fad, Bal: You can make these two adjustments at the same time, by referring to the indication on the display. • Press 5 (up) or ∞ (down) to adjust the fader. • Press ¢ or 4 to adjust the balance. You can adjust the sound characteristics to your preference. • “Vol Adj” setting is required for each source except FM.
ENGLISH Selecting preset sound modes (iEQ: intelligent equalizer) You can select a preset sound mode (iEQ: intelligent equalizer) suitable to the music genre. • There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again. 2 Press the number button to select the sound mode you want. • This unit has two sound mode selection screens. To move to the other screen, press 5 (up) or ∞ (down). Available sound modes: • • • • • • 1 FLAT (Flat) H.
4 You can adjust the sound modes to your preference and store your own adjustments in memory (User 1, User 2, and User 3). • There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again. 1 Make adjustments as you like. ENGLISH Storing your own sound adjustments 1) Press ¢ or 4 to select the frequency band—60Hz, 150Hz, 400Hz, 1kHz, 2.4kHz, 6kHz, 12kHz. Press EQ (equalizer) once.
ENGLISH OTHER MAIN FUNCTIONS Operations of this section are explained using the buttons on the control panel unless mentioned otherwise. 3 Select the PSM item you want to adjust. Changing the general settings (PSM) You can change the items listed in the table on page 51 by using the PSM (Preferred Setting Mode) control. • The PSM items are grouped into five categories—MOVIE, CLOCK, DISP (display), AUDIO, and COLOR. • By pressing ¢ or 4 repeatedly, you can also move to other categories.
CLOCK MOVIE Indications Graphics Selectable values/items Movie demonstration All Demo Int Demo Int Demo 9, 52 Long 52 1 – 12 (0 – 23) 1 (1:00) 9 00 – 59 00 (1:00) 9 12Hours 10 Once 52 Auto 54 Off Long Short KeyIn CFM Key in confirmation Clock Hr Hour adjustment Clock Min Minute adjustment 24H/12H 24 hours or 12 hours Scroll Scroll mode Dimmer Dimmer mode Auto Time Set From– To*1 Dimmer time setting Any time – Any time 6PM – 7AM 54 Contrast Contrast 1 – 10 5 52
ENGLISH To set the movie demonstration—Graphics When shipped from the factory, the movie has been activated. • All Demo: If no operation is done for about 20 seconds, the movie demonstration starts automatically. • Int Demo: If no operation is done for about 20 seconds, the movie demonstration and playback source indication appears alternately on the display. • Off: Cancels the movie demonstration.
• NTSC: • PAL: Select when connecting an NTSC monitor. Select when connecting a PAL monitor. Graphics KeyIn CFM Clock Hr Clock Min 24H/12H Scroll You can deactivate the key-touch tone if you do not want it to beep each time you press a button. • On: Activates the key-touch tone. • Off: Deactivates the key-touch tone. Dimmer • Changer: To use the CD changer. • Line In: To use the external component other than CD changer.
ENGLISH 4 Selecting the dimmer mode Set the dimmer mode to your preference. You can dim the display at night automatically or as you set the timer. When shipped from the factory, Auto Dimmer mode is activated. ATT Note: Auto Dimmer supplied with this unit may not work correctly on some vehicles, particularly on those having a control dial for dimming. In this case, select any setting other than “Auto.” 1 • Auto: Activates Auto Dimmer.
You can set the display color using the PSM control. You can select your favorite color for each source (or for all sources). You can also create your own colors, and set them as the display color. 4 As you turn the control dial, the colors change as follows: Setting the desired color for each source ATT Once you have set the color for each source (or for all sources), the display illuminates in the selected color when the source is selected.
ENGLISH Creating your own color—User You can create your own colors—“Day” and “Night,” and select them as the display color for any desired source. • Day: Can be used as your user color during the day time (while the headlights are turned off), or as set by the timer— “From – To.” • Night: Can be used as your user color during the night time (while the headlights are turned on), or as set by the timer— “From – To.
3 You can assign names to station frequencies, CDs (both in this unit and in the CD changer), and the external component. After assigning a name, it will appears on the display when you select the source. Select the character set you want while the first character position is flashing.
ENGLISH Detaching the control panel You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Attaching the control panel 1 Insert the right side of the control panel into the groove on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. 1 Unlock the control panel.
ENGLISH CD CHANGER OPERATIONS SRC ATT MODE DISP 1 SEL 2 Operations of this section are explained using the buttons on the control panel unless mentioned otherwise. We recommend that you use the JVC MP3compatible CD changer with your unit. By using this CD changer, you can play back your original CD-Rs (Recordable) and CD-RWs (Rewritable) recorded either in audio CD format or in MP3 format. • You can also connect other CH-X series CD changers (except CH-X99 and CH-X100).
ENGLISH • When the current disc is a CD: Playback starts from the first track of the current disc. Selected disc number To go to a particular disc directly Press the number button corresponding to the disc number to start its playback (while the CD changer is playing). 1 2 3 4 5 6 • To select a disc number from 1 – 6: Press 1 (7) – 6 (12) briefly. • To select a disc number from 7 – 12: Press and hold 1 (7) – 6 (12) for more than one second.
How to go to the desired track quickly • Ex. 1: To select track number 32 while playing track number 6 To go to a track quickly 1 Press MODE (M) to enter the functions mode while playing a disc. MODE “Mode” appears on the display. MODE ENGLISH This operation is only possible when using JVC MP3-compatible CD changer (CH-X1500). M M (Three times) Track 6 (Twice) \ 10 \ 20 \ 30 \ 31 \ 32 • Ex. 2 :To select track number 8 while playing track number 36 MODE M 2 Press 5 (up) or ∞ (down).
ENGLISH To select a disc using the disc lists If you forget what discs are loaded in the CD changer, you can show the disc title list and select a disc in the list shown on the display. • The display can show only six disc names at a time. 1 While playing a disc, press and hold 5 (up) or ∞ (down) until a disc name list appears on the display. While playing an MP3 disc, you can also show the folder list(s) and track list(s) on the display, then select a folder or track.
To play back tracks repeatedly (Repeat Play) Mode Repeat Track From the remote controller: REPEAT +10 Press REPEAT ( ) repeatedly until the Repeat Play mode you want is selected. Repeat Folder* Repeat Disc On the control panel: MODE 1 Press MODE (M) to enter the functions mode during play. “Mode” appears on the display. indicator lights up. indicator lights up. The current (or specified) track. All tracks of the current (or specified) folder of the current disc.
To play back only intros (Intro Scan) ENGLISH 2 Press number button 3 repeatedly while “Mode” is still on the display. Each time you press the button, Random Play mode changes as follows: 3 From the remote controller: INTRO I 0 Press INTRO (I) repeatedly until the Intro Scan mode you want is selected. For MP3 discs: Random Folder Random Disc Random Off Random All On the control panel: MODE functions mode during play. “Mode” appears on the display.
ENGLISH EXTERNAL COMPONENT OPERATIONS SRC ATT MODE DISP 1 SEL 2 3 Operations of this section are explained using the buttons on the control panel unless mentioned otherwise. 4 1 5 6 Playing an external component You can connect the external component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied). Before operating the external component, select the correct external input correctly by following the procedure below.
ENGLISH ADDITIONAL INFORMATION Sound modes (preset frequency level settings) The list below shows the preset frequency level settings for each sound mode. • You can adjust the preset sound modes temporarily. However, your temporary adjustments will be reset when you select another sound mode. Sound Preset equalizing values Mode 60 Hz Flat 150 Hz 400 Hz 1 kHz 2.
Code Language Code Language Code Language AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DA DZ EL EO ET EU FA FI FJ FO FY GA GD GL GN GU HA HI HR HU HY IA IE IK IN IS IW JI JW Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish Bhutani Greek Esperanto Estonian Basque Persian Finnish Fiji Faroese Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi
ENGLISH GLOSSARY 4:3 Letterbox Screen DTS Digital Surround This is one method for displaying a wide screen picture on a conventional sized (4:3) TV. While viewing a wide screen picture, the black bars appear on the top and the bottom of the screen. This is another discrete 5.1 channel digital audio format, available on CD, LD, and DVD software, developed by Digital Theater Systems, Inc. Compared to Dolby Digital, the audio compression rate is relatively low.
What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • This unit does not work at all. The built-in microcomputer may have functioned incorrectly due to noise, etc. Press the reset button on the panel holder after detaching the control panel. (The clock setting and preset stations stored in memory are erased.) (See page 2.
ENGLISH Causes You are driving on rough roads. Stop playback while driving on rough roads. Disc is scratched. Change the disc. Connections are incorrect. Check the cords and connections. No disc in the loading slot. Insert a disc into the loading slot. Disc is inserted incorrectly. Insert the disc correctly. • No playback picture (DVD, VCD) appears on the monitor. Parking brake wire is not connected. Connect the wire (see Installation/Connection Manual).
Causes Insert discs into the magazine. Discs are inserted upside down. Insert discs correctly. Discs are unplayable. Insert playable discs. The current disc does not contain any MP3 files. Insert a disc that contains MP3 files. • “No Magazine” flashes on the display. No magazine is loaded in the CD changer. Insert the magazine. • “Reset 8” flashes on the display. This unit is not connected to the CD changer correctly.
ENGLISH MAINTENANCE Handling discs When playing a CD-R or CD-RW This unit has been designed to reproduce DVDVideos, VCDs, CDs, CD-Rs (Recordable), CDRWs (Rewritable), and CD Texts. • This unit is also compatible with MP3 discs. How to handle discs When removing a disc Center holder from its case, press down the center holder of the case and lift the disc out, holding it by the edges. • Always hold the disc by the edges. Do not touch its recording surface.
AUDIO AMPLIFIER SECTION DVD/CD PLAYER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Range: Frequencies: 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit !" !\ ! !"#$%&'() = == = ! !== == !" \ "\ = ! = !"#$K À“°¡’ª—≠À“„π°“√„™Èß“π °√ÿ≥“°¥ªÿË¡µ—Èߧ˓‡√‘Ë¡µÈπ„À¡Ë °√ÿ≥“¥ŸÀπÈ“«‘∏’µ—Èߧ˓‡§√◊ËÕß„À¡Ë VICTOR COMPANY OF JAPAN, LIMITED EN, CH, KO, TH COVER DV-5000 V J © 2003 VICTOR COMPANY OF JAPAN, LIMITED 2 C 20/5/03, 3:38 PM 0503MNMMDWJEIN
KD-DV5000 Installation/Connection Manual !"#$ L L == °“√µ‘¥µ—Èß/§ŸË¡◊Õ°“√µ‘¥µ—Èß V J LVT1055-003A C 0503MNMMDWJEIN EN, CH, KO, TH [U] ENGLISH ‰∑¬ • This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems.
E E F INSTALLATION (IN-DASH MOUNTING) • The following illustration shows a typical installation. However, you should make adjustments corresponding to your specific car. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • !"#$%&' ()*+,-./0 !" #$%&'(" )*+#, !"#$%&'()#*+,-.
• When using the optional stay • • == !"# = Fire wall Washer ! !== • ‡¡◊ËÕ„™Èµ—«¬÷¥·∫∫‡≈◊Õ°‰¥È Stay (option) !" =E = F ºπ—ß°—π‰ø ª√–‡°Áπ«ß·À«π = µ—«¬÷¥ (‡≈◊Õ°‰¥È) Lock nut ! != Dashboard ! Less than 30˚ 30° 30˚= πÈÕ¬°«Ë“ 30 Õß»“ πÕµ≈ÁÕ§ ºßÀπÈ“ª—∑¡Ï Screw (option) !"#$% =E = F °√Ÿ (‡≈◊Õ°‰¥È) Install the unit at an angle of less than 30˚.
ENGLISH ELECTRICAL CONNECTIONS To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the unit. If you are not sure how to install this unit correctly, have it installed by a qualified technician. Note: This unit is designed to operate only on 12 V DC, NEGATIVE ground electrical systems.
!"#$ / A Typical Connections / Before connecting: Check the wiring in the vehicle carefully not to fail in connecting this unit. Incorrect connection may cause a serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color. 1 Connect the colored leads of the power cord to the car battery, speakers and automatic antenna (if any) in the following sequence.
How to connect the crimp connector / !"#$!% / = = / «‘∏’µËÕ¢—È«µËÕ ”À√—∫Àπ’∫ Wire connecting the battery and the parking brake switch !"#$%&'()* + != = != != != “¬∑’˵ËÕ°—∫·∫µ‡µÕ√’Ë·≈– «‘µ™Ï‡∫√°¡◊Õ Contact the metallic part of the crimp connector to the wires inside. !"#$%&'(!)*+#,-. != !"= = = !"= K Attach the parking brake wire to this point. !"#$%&'()*+ = != = = != !"K µËÕ “¬‡∫√°¡◊Õ∑’Ë®ÿ¥π’È Pinch the crimp connector firmly.