Page 1 Thursday, September 2, 2004 8:34 AM English UX-QD7[UB]-01.fm MICRO COMPONENT MD SYSTEM MD 微型组合音响 中 文 UX-QD7M Consists of CA-UXQD7M and SP-UXQD6M 由 CA-UXQD7M 和 SP-UXQD6M 组成 UX-QD7W Consists of CA-UXQD7W and SP-UXQD6W 由 CA-UXQD7W 和 SP-UXQD6W 组成 For hiding the demonstration display, refer to page 16.
UX-QD7[UB]-02.fm Page 1 Wednesday, July 14, 2004 1:25 PM Warnings, Cautions and Others / 警告,注意及其他须知事项 Introduction CAUTION 注意 To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. 为了减少触电、火灾等危险: 1. 请勿擅自卸下螺丝钉、盖子或机壳。 2. 请勿让本机受雨淋或置于潮湿环境中。 CAUTION — F button! 注意- F 开关! Disconnect the mains plug to shut the power off completely. The F button in any position does not disconnect the mains line.
UX-QD7[UB]-02.fm Page 2 Thursday, September 2, 2004 8:36 AM CAUTION — Proper Ventilation 注意 — 正确的通风方法 To avoid risk of electric shock and fire and to protect from damage, locate the apparatus as follows: Top/Front/Back/Sides: No obstructions should be placed in the areas shown by the dimensions below. Bottom: Place on the level surface. Maintain adequate air path for ventilation by placing on a stand with a height of 10 cm or more. In addition, maintain the best possible air circulation.
UX-QD7[UB].book 1 ページ 2004年9月3日 金曜日 午後2時43分 Table of Contents marks refer to operation used frequently. You can quickly learn the general usage of this product by reading those parts only. Introduction Listening to Discs Notes on Operation ............................. 3 Suitable Locations for the Main Unit ................. Condensation.................................................... Cleaning the Main Unit ..................................... Listener’s Etiquette ..............................
2004年9月16日 木曜日 午後1時13分 Listening to Cassette Tapes Editing MDs Listening to Cassette Tapes .............................................. Giving (Editing) Titles ..........................58 43 Changing the Display in the Display Window ..................................................................... 44 Listening to Other Equipment ..............45 Adjusting the Sound Input Level from Other Equipment.......................................... 45 Changing the Display in the Display Window ...
UX-QD7[UB].
2004年9月3日 金曜日 午後2時43分 Playable Disc Types This product has been designed to play back the following discs: DVD VIDEO, DVD AUDIO, VCD, SVCD, CD This product can also play back the following discs: • Finalized DVD-R/RW discs recorded in the DVD VIDEO format.
UX-QD7[UB]-03.fm 5 ページ 2004年9月27日 月曜日 午後1時6分 Introduction (Continued) Notes on Operation About MP3/WMA/JPEG discs Playable MP3/WMA/JPEG discs and files • Discs recorded in the ISO 9660 format are playable (except discs recorded in the "packet write" format (UDF format)). • Discs recorded in the multi-session format are also playable. • Files with an extension of ".mp3", ".wma", ".jpg" or ".jpeg" (extensions with uppercase and lowercase letters mixed are also acceptable) are playable.
6 ページ 2004年9月7日 火曜日 午前10時33分 English UX-QD7[UB]-03.fm Selecting the Color System Introduction This product is compatible with PAL and NTSC color systems. In standby mode, select PAL or NTSC to match your TV. If the VIDEO OUT SELECT switch is switched over when the power is on, turn off the power, and then turn it on again. • Before playing back a disc, it is also required to select the correct MONITOR TYPE in the PICTURE menu according to the aspect ratio of your TV ( page 39).
UX-QD7[UB].book 7 ページ 2004年9月3日 金曜日 午後2時43分 Introduction Special Cautions Avoid high temperatures Do not expose the system to direct sunlight and do not place it near a heating equipment. Notes on Handling ■Important cautions Installation of the system • Select a place which is level, dry and neither too hot nor too cold; between 5°C and 35°C. • Leave sufficient distance between the system and the TV. • Do not use the system in a place subject to vibration.
UX-QD7[UB]-03.fm 8 ページ 2004年9月16日 木曜日 Part Description 午後1時22分 Introcution/Preparation English The numbers refer to the pages in which the parts are explained.
UX-QD7[UB].book 9 ページ 2004年9月3日 金曜日 Remote Control 20 22 午後2時43分 Introduction Preparation The numbers refer to the pages in which the parts are explained.
2004年9月17日 金曜日 午後4時27分 This page is for when operating your TV using the remote control of this product. Operating the TV Using the Remote Control 4 Press number buttons (1-9, 0). Examples: For a Hitachi TV: Press 1, then 0. For a Toshiba TV: Press 0, then 8. If there are two or more manufacturer's codes, try them in turn and select the one that causes the product to work properly.
UX-QD7[UB]-03.fm 11 ページ 2004年9月7日 火曜日 午前10時33分 Introduction Connections Connect all necessary parts before connecting the power plug. Connecting the Antennas Connecting the AM antenna 1 Vinyl-covered wire: 3 - 5 m (not supplied) Set up the AM antenna (supplied). Insert the tab into the slot. 2 ■When radio reception with the supplied AM loop antenna is poor Twist together vinylcovered wire and the AM loop antenna cord.
12 ページ 2004年9月6日 月曜日 午後5時36分 Connecting the FM antenna Main unit (rear view) ■When radio reception with the supplied FM antenna is poor, or when using a communal antenna Main unit (side view) FM antenna (supplied) Main unit (rear view) Main unit (side view) Antenna cord (not supplied) Stretch out the FM antenna to the best position for radio reception, and then fix it with adhesive tape.
UX-QD7[UB].book 13 ページ 2004年9月3日 金曜日 午後2時43分 Introduction (Continued) Connections Connect all necessary parts before connecting the power plug. Connecting the Speakers After connecting the speakers, gently pull on the speaker cords to make sure the cords are firmly connected and do not pull out. Main unit (rear view) Speaker cord Speaker cord Speaker cord Red Red Black Black Left speaker (rear view) Right speaker (rear view) CAUTION • Do not short-circuit the and speaker terminals.
2004年9月3日 金曜日 午後2時43分 Connecting Other Equipment Connecting with digital equipment Read this section when connecting other audio equipment to this product. AV amplifier with a built-in decoder (not supplied) English 14 ページ Preparation UX-QD7[UB].
UX-QD7[UB].book 15 ページ 2004年9月3日 金曜日 午後2時43分 Introduction (Continued) Connections Connect all necessary parts before connecting the power plug. Connecting with a TV TV Connecting by using the component video cord Supplied video cord VIDEO IN VIDEO Main unit You can enjoy better quality pictures than when using the S-video cord. TV CAUTION • Connect the main unit directly with a TV (or a monitor) without routing through a VCR. Otherwise it may cause picture distortion while playing back.
16 ページ 2004年9月16日 木曜日 午後1時29分 English UX-QD7[UB]-03.fm Connecting the Power Plug Main unit (rear view) Preparation AC outlet • After making all other necessary connections, connect in the power plug. NOTE • The preset setting such as preset channels and sound adjustment may be erased in a few days in the following cases: - When you disconnect the power plug. - When a power failure occurs.
UX-QD7[UB].book 17 ページ 2004年9月3日 金曜日 午後2時43分 Introduction Basic Operations Basic Operations This manual explains the operations assuming that you will use the remote control. Some buttons on the main unit are the same as those on the remote control. You can use either button in this case. 2 Set the hour. Back Next • Holding down the button causes the hour to increment. • You can use the number buttons to specify the hour. Refer to "Using the number buttons" shown below.
2004年9月16日 木曜日 午後1時31分 Turning On/Off the Main Unit English 18 ページ Adjusting the Sound Quality Selecting the sound mode Press (or on the main unit). • With the power off, pressing either button also turns on the main unit. The function assigned to the button starts working at the same time. Press . • Each time you press gles as follows. Remote control: : For emphasizing treble and bass sounds. Main unit: : Adequate for songs and narrations.
UX-QD7[UB].book 19 ページ 2004年9月3日 金曜日 午後2時43分 Introduction (Continued) Basic Operations For the locations of remote control buttons, refer to page 17. Changing the Color Patterns for the Display Window and Disc Tray Press (or on the main unit). • Each time you press gles as follows. , the display tog- : For a rainbow-like pattern. : For a flower-image pattern. : Gradually changes the color pattern in a cycle of approximately 20 seconds. : For an ocean-image pattern. : For a fantasy pattern.
UX-QD7[UB].book 20 ページ 2004年9月3日 金曜日 午後2時43分 Listening to Radio Broadcasts Remote control mode selector ■When the main unit is turned off To select 10 kHz spacing, while holding down on the main unit, press on the main unit to turn on the power. "AM 10 kHz" appears in the display window. To select 9 kHz spacing, while holding down on the main unit, press on the main unit to turn on the power. "AM 9 kHz" appears in the display window.
UX-QD7[UB].book 21 ページ 2004年9月3日 金曜日 午後2時43分 Introduction (Continued) Listening to Radio Broadcasts Storing Radio Stations (Preset) You can store up to 30 FM radio stations and up to 15 AM radio stations. For the locations of remote control buttons, refer to page 20. Entering radio station names You can enter the name of a stored radio station using up to 8 characters. 1 Set the remote control mode selector to AUDIO.
UX-QD7[UB].book 22 ページ 2004年9月3日 金曜日 午後2時43分 Basic Operations of the DVD Player • The illustrations and TV screens may be different between the actual case and the description. • "VCD" stands for "Video CD". • "SVCD" stands for "Super Video CD". Playback (Refer to page 37 for playing back MP3/WMA and JPEG.) 1 Press 2 Place a disc on the disc tray. on the main unit. • The disc tray comes out.
UX-QD7[UB].book 23 ページ 2004年9月3日 金曜日 午後2時43分 Introduction (Continued) Basic Operations of the DVD Player ■Display for CD ■Display for VCD/SVCD Display while a CD is being played back: CD indicator (The CD indicator lights up while the CD is stopped. The CD indicator flashes while the CD is being played back or paused.) Track number Elapsed playing time Display while a VCD/SVCD is being played back: VCD indicator (The VCD indicator lights up while the VCD/SVCD is stopped.
UX-QD7[UB].book 24 ページ 2004年9月3日 金曜日 午後2時43分 Listening to Discs While a DVD is selected as the sound source, the messages shown below are displayed, depending on the status. NOW READING The main unit is reading the disc. Wait for a while. REGION CODE ERROR! The disc cannot be played back because its region code is not compatible. ( page 4) NO DISC No disc is loaded. OPEN The disc tray is opening. CLOSE The disc tray is closing. CANNOT PLAY You are trying to play back an unplayable disc.
UX-QD7[UB].book 25 ページ 2004年9月3日 金曜日 午後2時43分 Introduction (Continued) Basic Operations of the DVD Player Stopping Playback Pausing Playback ■While a disc is being played back ■While a disc is being played back Press Press . Resuming Playback (RESUME) . To resume normal playback, press . • Playback cannot be paused by pressing When playback is stopped in the middle, playback can be started from the stopped scene. How to suspend playback on the main unit during JPEG disc slide-show.
UX-QD7[UB]-03.fm 26 ページ 2004年9月16日 木曜日 午後1時35分 • Refer to "Using the number buttons" ( page 17). (only for moving image) ■While a disc is paused Press or NOTE . • You can operate a VCD or SVCD while the disc is stopped or played back with PBC off. • You can operate a DVD AUDIO, CD, MP3, WMA, or JPEG while the disc is either played back or stopped. • This operation may not be carried out for some discs. • Each time you press , the speed increases as shown below.
UX-QD7[UB].book 27 ページ 2004年9月3日 金曜日 午後2時43分 Introduction Convenient Functions of the DVD Player Listening to Discs Selecting the Audio ■While a disc containing two or more audio is being played back Remote control mode selector 1 Press AUDIO . Example: TV screen Selected audio/Total number of audio Selected audio AUDIO • Each time you press , the audio will be changed. The audio can also be changed by pressing . Number buttons 2 Wait for a few seconds or press .
2004年9月3日 金曜日 午後2時43分 Selecting the Subtitle English 28 ページ Selecting a View Angle (only for moving image) (only for moving image) ■While a disc containing two or more subtitles is being played back ■While a disc containing two or more view angles is being played back 1 1 Press . Example: TV screen Press . Example: TV screen Selected view angle/ Total number of view angles Selected subtitle/Total number of subtitles (When no subtitle is set in the disc, "--" appears.
UX-QD7[UB].book 29 ページ 2004年9月3日 金曜日 午後2時43分 Introduction (Continued) Convenient Functions of the DVD Player Adjusting the Picture Quality (VFP) ■While a disc is played back or paused 1 Press . Example: TV screen Current VFP mode USER1 5 Press value. 6 Press 7 Press . • To adjust other items, go back to step 3. . • If no operation is made for several seconds during the procedure, the settings made so far will be automatically stored. • "VFP" stands for "video fine processor".
UX-QD7[UB].book 30 ページ 2004年9月3日 金曜日 午後2時43分 Enjoying Better Pictures (PROGRESSIVE) In the progressive mode, you can enjoy better pictures. The audio of a DVD VIDEO and DVD AUDIO may be recorded at a lower level (volume) than for other types of disc. You can adjust the DVD level. ■While a disc is being played back Press . • Each time you press , the display toggles as follows in the display window. : Sound level recorded in the DVD. : Enhances the sound level (initial setting).
UX-QD7[UB].book 31 ページ 2004年9月3日 金曜日 午後2時43分 Introduction (Continued) Convenient Functions of the DVD Player Playing Back the Bonus Group There are some DVD AUDIO discs with a special group, called "bonus group", recorded. Browsable Still Pictures (B.S.P.) There are some DVD AUDIO discs with still pictures recorded. Among the still pictures, there are pictures called B.S.P. (browsable still pictures). You can change these pictures as if turning over pages.
UX-QD7[UB].book 32 ページ 2004年9月3日 金曜日 午後2時43分 Example: For DVD VIDEO TV screen Program screen You can program a maximum of 99 chapters or tracks. You can program the same chapter or track more than once. ■While a disc is stopped 1 Set the remote control mode selector to AUDIO. 3 Press the number buttons ( or ) to program chapters/ tracks. ■Display for DVD VIDEO • Select a title number, and then select a chapter number. 2 Press to select "PROGRAM".
UX-QD7[UB].book 33 ページ 2004年9月3日 金曜日 午後2時43分 Introduction (Continued) Convenient Functions of the DVD Player Example: For DVD VIDEO TV screen 1 Random Playback 5 You can listen to tracks or chapters in random order. ■ While playback is stopped 1 • Refer to "Using the number buttons" ( page 17). • Before selecting a bonus group of a DVD AUDIO, cancel the "BONUS" display as explained in "Playing back the Bonus Group" on page 31.
UX-QD7[UB].book 34 ページ 2004年9月3日 金曜日 午後2時43分 English For the locations of remote control buttons, refer to page 27. Repeat Playback Listening to Discs Refer to page 38 for repeat playback of MP3/WMA and JPEG files. ■While a disc is being played back Press . • Each time you press will be changed.
UX-QD7[UB]-04.fm 35 ページ 2004年9月16日 木曜日 午後1時37分 Introduction Status Bar and Menu Bar Changes time information displayed in the display window on the main unit and Time display selection Remote control mode selector the status bar. Each time is pressed, the display will be changed. DVD VIDEO/DVD AUDIO TOTAL : Elapsed playing time of current title/ group T.
2004年9月3日 金曜日 午後2時43分 Playing Back the Designated Part Repeatedly (A-B Repeat Playback) Press 3 4 Press Press 5 . 2 Press twice. • The menu bar appears ( . to select . Press at the starting point of the part to be repeated (designating A point). • The icon on the menu bar will be 6 Set the remote control mode selector to AUDIO. page 35) appears. to select Press OFF A B 1 twice.
UX-QD7[UB]-04.fm 37 ページ 2004年9月16日 木曜日 午後1時38分 Introduction Playing Back MP3/WMA and JPEG Discs Playback Remote control mode selector Display of an MP3/WMA disc is described here as an example. For a JPEG disc, read "track" as "file". NOTE • When playing back a disc containing both MP3/ WMA and JPEG files, set one of them to be played ( page 39). 1 Insert a disc. Example: TV screen Number buttons This indicator lights up during repeat playback This indicator lights up ( page 38).
4 Press 5 Press 2004年9月3日 金曜日 午後2時43分 to select a track. or English 38 ページ Repeat Playback . Example: Display during playback Group number Track number ■While a disc is being played back Press . • Each time you press changed. Elapsed playing time (This indicator is not displayed while a JPEG is loaded.) • At first, a track title (file name) is scrolled. • When an MP3 or WMA is loaded, tag information (title/artist/album) is scrolled followed by a track title.
UX-QD7[UB].book 39 ページ 2004年9月3日 金曜日 午後2時43分 Introduction Preferences LANGUAGE NOTE Number buttons • If the selected language is not recorded on the disc, the optimum language set for the disc appears. • For a language code such as "AA", refer to the "Language Codes" ( page 42). Items Contents MENU LANGUAGE Select the language for the DVD VIDEO menu. AUDIO LANGUAGE Select the audio language for the DVD VIDEO.
2004年9月16日 木曜日 午後1時48分 AUDIO Items OTHERS Contents ( DIGITAL AUDIO OUTPUT Items : initial setting) Select an output signal type from the following in accordance with the equipment connected to the digital audio output terminal (AV amplifier, etc.). (See the list below for the preference items and output signal.) PCM ONLY: Equipment corresponding only to linear PCM.
UX-QD7[UB]-04.
UX-QD7[UB].
UX-QD7[UB].book 43 ページ 2004年9月3日 金曜日 午後2時43分 Introduction Listening to Cassette Tapes 1 Insert a cassette tape. Insert a cassette tape with the side you want to listen to facing up. Cassette tape indicator (The cassette tape indicator lights up while the cassette tape is stopped. The cassette tape indicator flashes while the cassette tape is being played back.
UX-QD7[UB].book 44 ページ 2004年9月3日 金曜日 午後2時43分 3 Press English Listening to Cassette Tapes . • Playback starts. • When the main unit is turned off, pressing • Each time you press Listening to Cassette Tapes automatically turns on the main unit. , the cassette tape playback direction changes. The initial playback direction after you have inserted a cassette tape is always the normal direction. • The cassette tape playback direction indicator facing right is displayed during normal playback.
UX-QD7[UB].book 45 ページ 2004年9月3日 金曜日 午後2時43分 Introduction Listening to Other Equipment Listening to Cassette Tapes/Listening to Other Equipment 2 (With "AUX" being displayed) Hold down until the input level appears. • Each time you hold down toggles as follows. , the display For ordinary use. (initial setting) For increasing the level. Adjusting the sound input level of the AUX-DIGITAL 1 2 3 1 Press 2 Start other equipment playback. 3 Adjust the volume and make other necessary settings.
UX-QD7[UB].book 46 ページ 2004年9月3日 金曜日 午後2時43分 Listening to MDs Remote control mode selector English Listening to Other Equipment/Listening to MDs Listening to MDs 1 Insert an MD. CAUTION Number buttons • Do not insert an MD while the main unit is turned off. Forcibly inserting an MD may damage the main unit. 2 Press . ■Display while an MD is being played back MD indicator (The MD indicator lights up while the MD is stopped.
UX-QD7[UB].book 47 ページ 2004年9月3日 金曜日 午後2時43分 Introduction (Continued) Listening to MDs Changing the Display in the Display Window Press . • Each time you press gles as follows. , the display tog- Group Playback of an MD You can play back just the tracks from a group which you want to listen to. ■While an MD is stopped 1 ■While an MD is being played back Press repeatedly to select "GROUP".
UX-QD7[UB].book 48 ページ 2004年9月3日 金曜日 午後2時43分 Listening to MDs Program Playback Confirming the programmed track order While playback is stopped, press ■While the MD is stopped 1 or repeatedly. • You can add a track as the last track in the program, or erase the last track. ( step 3) Set the remote control mode selector to AUDIO. Canceling the program playback 2 Press to select "PROGRAM".
UX-QD7[UB].book 49 ページ 2004年9月3日 金曜日 午後2時43分 Introduction (Continued) Listening to MDs Canceling the random playback While playback is stopped, press repeatedly to display an item other than "RANDOM". NOTE Searching Titles This function allows you to search titles for tracks or groups in an MD. ■While a disc is stopped 1 Set the remote control mode selector to AUDIO. 2 Press repeatedly to select the search type. • Ejecting the MD or turning off the main unit also cancels random playback.
UX-QD7[UB].book 50 ページ 2004年9月3日 金曜日 午後2時43分 English For the locations of remote control buttons, refer to page 46. Searching another track or group title (or ). Listening to MDs Press Quitting the title search Press . • The title search is canceled and playback returns to the beginning of the current track.
UX-QD7[UB]-04.fm 51 ページ 2004年9月16日 木曜日 午後1時49分 Introduction Recording Sound to MDs Recording Sound 3 Main unit Press mode. to select the MDLP • Each time you press gles as follows. , the display tog- : For standard stereo recording (Maximum recording time is 80 minutes with an MD 80). : For ×2 extended stereo recording (Maximum recording time is 160 minutes with an MD 80). Remote control : For ×4 extended stereo recording (Maximum recording time is 320 minutes with an MD 80).
Press 2004年9月3日 金曜日 午後2時43分 on the main unit. Example: Display while CD is recorded Elapsed playing time of the track being recorded MDLP mode Recording the Second or Subsequent Track to the Last Track from a Disc ■When recording CDs/VCDs/SVCDs/DVD VIDEOs (For a DVD VIDEO: while the disc is paused) Remaining time for recording This indica- This indicator tor lights up lights up during group recording. during ×5 high speed recording.
UX-QD7[UB].book 53 ページ 2004年9月3日 金曜日 午後2時43分 Introduction (Continued) Recording Sound to MDs Recording Sound Changing the display in the display window during recording Press . • Each time you press gles as follows. , the display tog- "LP: " indicator setting Press . • Each time you press as follows. , the display toggles : For adding "LP: " to the track title. Elapsed playing time of the chapter or track being recorded : For deleting "LP: " from the track title.
UX-QD7[UB].book 54 ページ 2004年9月3日 金曜日 午後2時43分 Select a sound source. Sound source Radio broadcast Operation Select the radio station whose broadcast you want to record ( page 20). Insert a cassette tape for playback, Cassette tape playback press Sound from other equipment (AUX/ AUX-DIGITAL) Press repeatedly to select AUX or AUX-DIGITAL, and prepare playback on the other equipment ( page 45). 2 3 4 , and then press . Press to select the reverse mode when necessary. Insert an MD for recording.
UX-QD7[UB].book 55 ページ 2004年9月3日 金曜日 午後2時43分 Recording Sound to Cassette Tapes Main unit Remote control Introduction Preventing recorded sound from being erased • Write protect tags are attached to a cassette tape for preventing the erasing of recorded sound. They enable you to avoid losing important recordings because once you snap off the write protect tags, you cannot record to the cassette tape or erase recorded material.
2004年9月3日 金曜日 午後2時43分 Select a sound source for recording. • Before selecting a sound source, make sure to stop a disc and MD. Sound source Operation Disc Press , and then press . MD Press , and then press . Radio broadcast Select the radio station whose broadcast you want to record ( page 20). Sound from Press repeatedly to select AUX or other equipAUX-DIGITAL, and prepare playback ment (AUX/ AUX-DIGTAL) on the other equipment ( page 45). 4 Press on the main unit.
UX-QD7[UB].book 57 ページ 2004年9月3日 金曜日 午後2時43分 Introduction (Continued) Recording Sound to Cassette Tapes Changing the display in the display window during recording Press . • Each time you press gles as follows.
UX-QD7[UB].book 58 ページ 2004年9月3日 金曜日 午後2時43分 Giving (Editing) Titles • Press • You cannot edit an MD while its write protect knob is open ( page 75). When you attempt to edit a protected MD, "DISC PROTECTED" appears. • When you finish editing, "EDITING" appears, then "WRITING" flashes and the edited setting is recorded to the MD. While "WRITING" is displayed, be careful not to bump or sway the main unit. Such movement may interfere with MD playback.
UX-QD7[UB]-05.fm 59 ページ 2004年9月6日 月曜日 午後5時41分 Introduction (Continued) Giving (Editing) Titles 6 For the locations of remote control buttons, refer to page 58. Press on the main unit to eject the MD. NOTE • Number of characters that can be entered to an MD You can enter up to 1 792 characters to each MD, with up to 61 characters to each track. However, the actual number of characters that you can enter is less than the number indicated here because of restrictions of the MD writing method.
2004年9月3日 金曜日 午後2時43分 Editing Tracks Editing MDs For the locations of remote control buttons, refer to page 58. Dividing a Track into Two Tracks (DIVIDE) Example: Dividing a tune into tune A and tune B 4 Press 5 Press . 6 Press . or . • You can adjust the dividing point within the range of -128 to +128 position (approximately -8 to +8 seconds in SP mode). Track number NOTE ■While the track you want to divide is being played back 1 2 Press repeatedly to select "DIVIDE?".
UX-QD7[UB].book 61 ページ 2004年9月3日 金曜日 午後2時43分 Introduction (Continued) Editing Tracks Joining Tracks (JOIN) You can join two adjacent tracks into one track. Moving a Track (MOVE) Example: Moving tune B Example: Joining tune A and tune B ■While the second track (track 2 in the example shown above) to which you want to join the first track is being played back 1 2 ■While the track you want to move (track 2 in the example shown above) is being played back 1 Press repeatedly to select "MOVE?".
UX-QD7[UB].book 62 ページ 2004年9月3日 金曜日 午後2時43分 • During editing, you can return to the previous step by pressing . You can quit the editing operation by pressing . 4 5 Press . Confirm that you no longer need the tracks, and then press . NOTE • During editing, you can return to the previous step Erasing a Track (ERASE) by pressing . You can quit the editing operation by pressing . Example: Erasing tune B Erasing All Tracks (ALL ERASE) All tracks are erased.
UX-QD7[UB].book 63 ページ 2004年9月3日 金曜日 午後2時43分 Introduction Editing Tracks by Group You can sort tracks into 99 groups maximum. Forming a Group (FORM GR) 3 4 You can group tracks together. A sequence of tracks that is not registered in any group can be grouped. Press . Press or to select the track number which you want to specify as the last in the group. (Track number 3 is selected in the example shown on the left.
UX-QD7[UB].book 64 ページ 2004年9月3日 金曜日 午後2時43分 You can add a track to the specified group as the last track of the group. Dividing a Group into Two Groups (DIVIDE GR) Example: Dividing group 1 into two groups Editing MDs Adding a Track to a Group (ENTRY GR) English For the locations of remote control buttons, refer to page 58.
UX-QD7[UB].book 65 ページ 2004年9月3日 金曜日 午後2時43分 Introduction (Continued) Editing Tracks by Group Joining Groups (JOIN GR) You can join two adjacent groups. Moving a Group (MOVE GR) Example: Moving group 2 Example: Joining group 1 and group 2 Group 1 Group 1 Group 2 Group 2 Group 1 Group 1 ■While the track in the second group to which you want to join the first group (group 2 in the example shown above) is being played back 1 Press repeatedly to select "JOIN GR?".
UX-QD7[UB].book 66 ページ 2004年9月3日 金曜日 午後2時43分 English For the locations of remote control buttons, refer to page 58. Canceling a specified group (UNGROUP) Editing MDs Canceling a Group (UNGROUP/UNGR ALL) Canceling all groups (UNGR ALL) Example: Canceling all groups Example: Canceling group 1 Group 1 Group 1 Group 2 Group 2 Group 1 ■While a track in the group you want to cancel (group 1 in the example shown above) is being played back 1 Press repeatedly to select "UNGROUP?". 2 Press .
UX-QD7[UB].book 67 ページ 2004年9月3日 金曜日 午後2時43分 Introduction (Continued) Editing Tracks by Group For the locations of remote control buttons, refer to page 58. Erasing a Group (ERASE GR) You can erase a group including all tracks in the group. Example: Erasing group 2 Group 1 Group 2 Group 1 CAUTION • Once you erase a track, you cannot retrieve it. Before erasing a track, confirm that you no longer need it.
2004年9月6日 月曜日 Using the Timers 午後5時44分 Editing MDs/Convenient Functions Set the clock beforehand ( page 17). Example: Display while the sleep timer is set to 60 minutes Sleep indicator Remote control mode selector NOTE • When you set the sleep timer, the display window automatically dims. • Before the clock has been set (While "0:00" is flashing), when you press ADJUST!" appears. , "CLOCK Changing the sleep timer setting • Press repeatedly to select the time again.
UX-QD7[UB].book 69 ページ 2004年9月3日 金曜日 午後2時43分 Introduction (Continued) Using the Timers 2 Press repeatedly to select "TIMER1", "TIMER2" or "TIMER3". Example: When "TIMER1" is selected • When you want to record sound from other equipment, you cannot use the recording timer function to start playback on any equipment other than this product. • "AUX-D" stands for "AUX-DIGITAL".
UX-QD7[UB].book 70 ページ 2004年9月3日 金曜日 午後2時43分 Convenient Functions In step 2 on page 69, select the timer number you want to cancel, and then press . Even when you cancel the recording timer, the setting remains stored. Activating the recording timer again In step 2 on page 69, select the timer number you want to activate, and then press repeatedly until all of the setting procedure finishes. Then turn off the main unit.
UX-QD7[UB].book 71 ページ 2004年9月3日 金曜日 午後2時43分 Introduction (Continued) Using the Timers 8 9 Press For the locations of remote control buttons, refer to page 68. . Press or to select the sound source you want to play back. Example: When you want to listen to an AM broadcast 10 Press 11 Press . 12 Press . or to adjust the playback volume. • The settings appear in the display window. 13 When the main unit is turned on, press unit.
UX-QD7[UB].book 72 ページ 2004年9月3日 金曜日 午後2時43分 Disc/MD Ejection Lock Convenient Functions English Auto Standby If no sound is produced for 3 minutes when a sound source other than the FM/AM radio is selected, the main unit automatically turns off. ■When a sound source other than the FM/ AM radio is selected You can prohibit ejection of a disc and MD. Press ■When the main unit is turned off . "A. STANDBY" stands for "Auto Standby". While holding down the main unit.
UX-QD7[UB]-05.fm 73 ページ 2004年9月16日 木曜日 午後1時50分 Introduction Using AV COMPU LINK The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest operation. If your JVC TV set supports the JVC AV COMPU LINK system, simply starting the main unit will automatically make all necessary settings on the TV to allow you to enjoy the playback. Connection and Setting • Carefully read manuals of equipment to be connected.
UX-QD7[UB].book 74 ページ 2004年9月3日 金曜日 午後2時43分 Restrictions on MDs Phenomenon Possible cause "DISC FULL" appears even though recordable time as printed on the MD remains. Regardless of remaining recordable time, MDs have a limit on the number of recordable tracks. You cannot record 255 or more tracks to an MD. (You can record up to 254 tracks to an MD.) "DISC FULL" appears even though the track numbers and recordable time have not reached the limit.
UX-QD7[UB].book 75 ページ 2004年9月3日 金曜日 午後2時43分 Handling Discs/MDs/Cassette Tapes Handling discs Introduction Handling cassette tapes • Do not put adhesive tape or stickers, or write on a disc. • Do not bend a disc. • Be sure not to use heart/flower shaped discs or other irregularly shaped discs. The use of such discs damages the main unit. Cleaning discs Signal surface Scratches concentrated on a certain part cause sound dropout. Wipe a disc from the center outward with a soft cloth.
UX-QD7[UB]-05.fm 76 ページ 2004年9月6日 月曜日 午後5時49分 MD/Disc Messages Meaning Possible solution CANNOT ENTRY! The track has already been in the selected group. Select an appropriate track. ( CANNOT FORM! There is a group between the selected tracks. Select appropriate tracks. ( CANNOT GROUP! There is no space for storing more group information. (Group information is stored in the same area as title information.) You cannot form a group any more on the MD.
UX-QD7[UB]-05.fm 77 ページ 2004年9月6日 月曜日 午後5時49分 Introduction Troubleshooting Problem Possible cause Possible solution Reference page No sound/video is produced. Improper connection. Connect all cords properly. 11 Headphones are connected. Disconnect the headphone plug. 8 The clock display is flashing. A power failure occurred or the power plug was disconnected. Reset the clock. 17 The disc is upside down. Place the disc on the disc tray with the letter-printed surface facing up.
UX-QD7[UB]-05.fm 78 ページ 2004年9月24日 金曜日 午後2時52分 Cassette deck Amplifier Frequency response Normal (type I) 60 Hz - 14 000 Hz Wow and flutter 0.15% (WRMS) Output power 20 W + 20 W at 4 Ω (10% THD) Input terminals AUX×1, 500 mV/47 kΩ:LEVEL1 250 mV/47 kΩ:LEVEL2 Digital optical input × 1 -23 dBm to -15 dBm (Optical square terminal) (Compatible with frequency of 32 kHz, 44.
UX-QD7[UB]-BackCov.