UX-QD9S[A]-01.fm Page 1 Monday, August 30, 2004 11:59 AM MICRO COMPONENT SYSTEM UX-QD9S Consists of CA-UXQD9S and SP-UXQD9S For hiding the demonstration display, refer to page 15.
UX-QD9S[A]-02.fm Page 1 Thursday, September 2, 2004 9:29 AM Warnings, Cautions and Others Introduction CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION — F button! Disconnect the mains plug to shut the power off completely. The F button in any position does not disconnect the mains line. The power can be remote controlled. CAUTION • Do not block the ventilation openings or holes.
UX-QD9S[A]-02.fm Page 2 Thursday, September 2, 2004 9:29 AM CAUTION — Proper Ventilation To avoid risk of electric shock and fire and to protect from damage, locate the apparatus as follows: Top/Front/Back/Sides: No obstructions should be placed in the areas shown by the dimensions below. Bottom: Place on the level surface. Maintain adequate air path for ventilation by placing on a stand with a height of 10 cm more. In addition, maintain the best possible air circulation.
UX-QD9[A].book 1 ページ 2004年9月6日 月曜日 午後3時21分 Table of Contents marks refer to operation used frequently. You can quickly learn the general usage of this product by reading those parts only. Introduction Listening to Radio Broadcasts Notes on Operation ............................. 3 Suitable Locations for the Main Unit ................. Condensation.................................................... Cleaning the Main Unit ..................................... Listener’s Etiquette ....................
2 ページ 2004年9月22日 水曜日 午前10時29分 Playing Back MP3/WMA and JPEG Discs ..................................................36 Playback ....................................................36 Repeat Playback........................................37 Preferences .........................................38 Basic Operations .......................................38 LANGUAGE...............................................38 PICTURE ...................................................38 AUDIO .........................
UX-QD9[A].
4 ページ 2004年9月6日 月曜日 午後3時21分 Playable Disc Types This product has been designed to play back the following discs: DVD VIDEO, DVD AUDIO, VCD, SVCD, CD This product can also play back the following discs: • Finalized DVD-R/RW discs recorded in the DVD VIDEO format.
UX-QD9[A]-03.fm 5 ページ 2004年9月27日 月曜日 午後3時12分 Introduction (Continued) Notes on Operation About MP3/WMA/JPEG discs Playable MP3/WMA/JPEG discs and files • Discs recorded in the ISO 9660 format are playable (except discs recorded in the "packet write" format (UDF format)). • Discs recorded in the multi-session format are also playable. • Files with an extension of ".mp3", ".wma", ".jpg" or ".jpeg" (extensions with uppercase and lowercase letters mixed are also acceptable) are playable.
UX-QD9[A]-03.fm 6 ページ 2004年9月7日 火曜日 午前11時19分 Introduction Selecting the Color System This product is compatible with PAL and NTSC color systems. In standby mode, select PAL or NTSC to match your TV. If the VIDEO OUT SELECT switch is switched over when the power is on, turn off the power, and then turn it on again. • Before playing back a disc, it is also required to select the correct MONITOR TYPE in the PICTURE menu according to the aspect ratio of your TV ( page 38).
UX-QD9[A].book 7 ページ 2004年9月6日 月曜日 午後3時21分 Introduction Special Cautions Avoid high temperatures Do not expose the system to direct sunlight and do not place it near a heating equipment. Notes on Handling ■Important cautions Installation of the system • Select a place which is level, dry and neither too hot nor too cold; between 5°C and 35°C. • Leave sufficient distance between the system and the TV. • Do not use the system in a place subject to vibration.
UX-QD9[A]-03.fm 8 ページ 2004年9月22日 水曜日 Part Description 午前11時1分 Introcution/Preparation Introcution/Preparation The numbers refer to the pages in which the parts are explained. 18 20 21 22 17 28 42, 44 30 46-49 17 21 50 31-33 20 42 43 Cassette holder: 42 PUSH-OPEN 17 44 15, 18 28 21 17 Remote control sensor: 9 * 25, 30, 37, 45 24, 42 Disc tray: 21 * This terminal is for connecting a pair of headphones equipped with a stereo mini plug (not supplied).
UX-QD9[A]-03.fm 9 ページ 2004年9月22日 水曜日 Remote Control 午前11時1分 Introduction Preparation 18 21 The numbers refer to the pages in which the parts are explained.
10 ページ 2004年9月22日 水曜日 午前11時1分 This page is for when operating your TV using the remote control of this product. Operating the TV Using the Remote Control 4 Press number buttons (1-9, 0). Examples: For a Hitachi TV: Press 1, then 0. For a Toshiba TV: Press 0, then 8. If there are two or more manufacturer's codes, try them in turn and select the one that causes the product to work properly.
UX-QD9[A]-03.fm 11 ページ 2004年9月7日 火曜日 午前11時22分 Introduction Connections Connect all necessary parts before connecting the power plug. Connecting the Antennas Connecting the AM antenna 1 Vinyl-covered wire: 3 - 5 m (not supplied) Set up the AM antenna (supplied). Insert the tab into the slot. 2 ■When radio reception with the supplied AM loop antenna is poor Twist together vinylcovered wire and the AM loop antenna cord.
12 ページ 2004年9月7日 火曜日 午後3時31分 Connecting the FM antenna Main unit (rear view) ■When radio reception with the supplied FM antenna is poor, or when using a communal antenna Main unit (side view) FM antenna (supplied) Main unit (rear view) Main unit (side view) Antenna cord (not supplied) Stretch out the FM antenna to the best position for radio reception, and then fix it with adhesive tape.
UX-QD9[A]-03.fm 13 ページ 2004年9月7日 火曜日 午前11時22分 Introduction (Continued) Connections Connect all necessary parts before connecting the power plug. Connecting the Speakers After connecting the speakers, gently pull on the speaker cords to make sure the cords are firmly connected and do not pull out. Main unit (rear view) Speaker cord Speaker cord Speaker cord Red Red Black Black Left speaker (rear view) Right speaker (rear view) CAUTION • Do not short-circuit the and speaker terminals.
14 ページ 2004年9月6日 月曜日 午後3時21分 Connecting Other Equipment Read this section when connecting other audio equipment to this product. Other audio equipment CAUTION • For details of signals to be output, refer to page 39. • If connecting the main unit to equipment that has the function of a Dolby Digital decoder, the setting in "D. RANGE COMPRESSION" of "AUDIO" ( page 39) will be invalid regarding sound from the digital audio output of the main unit.
UX-QD9[A]-03.fm 15 ページ 2004年9月22日 水曜日 午前11時4分 Introduction (Continued) Connections Connect all necessary parts before connecting the power plug. When a Clearer Picture Is Desired Connecting the Power Plug AC outlet You can enjoy pictures of better quality using the following cord instead of the supplied video cord. Main unit (rear view) Connecting by using the S-video cord S-video cord (not supplied) TV Connect the ends of S-video cord making sure that each end matches its compatible terminal.
UX-QD9[A].book 16 ページ 2004年9月6日 月曜日 午後3時21分 Basic Operations This manual explains the operations assuming that you will use the remote control. Some buttons on the main unit are the same as those on the remote control. You can use either button in this case. 2 Set the hour. Back Next • Holding down the button causes the hour to increment. • You can use the number buttons to specify the hour. Refer to "Using the number buttons" shown below.
UX-QD9[A]-03.fm 17 ページ 2004年9月22日 水曜日 午前11時5分 Introduction (Continued) Basic Operations Turning On/Off the Main Unit Press (or Adjusting the Sound Quality Selecting the sound mode on the main unit). • With the power off, pressing either button also turns on the main unit. The function assigned to the button starts working at the same time. Press . • Each time you press gles as follows. Remote control: : For emphasizing treble and bass sounds. Main unit: : Adequate for songs and narrations.
UX-QD9[A].book 18 ページ 2004年9月6日 月曜日 午後3時21分 Basic Operations Changing the Color Patterns for the Display Window and Disc Tray Press (or on the main unit). • Each time you press gles as follows. , the display tog- : For a rainbow-like pattern. : For a flower-image pattern. : Gradually changes the color pattern in a cycle of approximately 20 seconds. : For an ocean-image pattern. : For a fantasy pattern. : For the color of your choice. (The setting shown on the left is initial setting.
UX-QD9[A]-03.fm 19 ページ 2004年9月22日 水曜日 午前11時12分 Listening to Radio Broadcasts Introduction Listening to Radio Broadcasts This product can receive FM and AM radio broadcasts. Setting the AM Tuner Spacing Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing. On the main unit ONLY: Remote control mode selector Number buttons ■When the main unit is turned off To select 10 kHz spacing, while holding down on the main unit, press on the main unit to turn on the power.
20 ページ 2004年9月22日 水曜日 午前11時12分 Selecting a Radio Station 1 Press repeatedly to select "FM" or "AM". Example: Display while an FM radio broadcast is received Stereo indicator Preset number ( on the right) Frequency 2 Press or repeatedly to select a radio station (frequency). • You can also select a radio station using the automatic tuning. Storing Radio Stations (Preset) You can store up to 30 FM radio stations and up to 15 AM radio stations.
UX-QD9[A]-03.fm 21 ページ 2004年9月22日 水曜日 午前11時12分 Introduction Basic Operations of the DVD Player Listening to Discs How to read this manual • Operations are described by mainly using the remote control buttons. If there are the same marks on the main unit, the buttons on the main unit can also be used. • The following marks tell you for which type of the discs the operation can be made. • The illustrations and TV screens may be different between the actual case and the description.
22 ページ 2004年9月6日 月曜日 午後3時21分 ■Display for CD ■Display for VCD/SVCD Display while a CD is being played back: CD indicator (The CD indicator lights up while the CD is stopped. The CD indicator flashes while the CD is being played back or paused.) Track number Elapsed playing time Display while a VCD/SVCD is being played back: VCD indicator (The VCD indicator lights up while the VCD/SVCD is stopped. The VCD indicator flashes while the VCD/SVCD is being played back or paused.
UX-QD9[A].book 23 ページ 2004年9月6日 月曜日 午後3時21分 Introduction (Continued) Basic Operations of the DVD Player Listening to Discs Messages displayed on the TV screen While a DVD is selected as the sound source, the messages shown below are displayed, depending on the status. NOW READING The main unit is reading the disc. Wait for a while. REGION CODE ERROR! The disc cannot be played back because its region code is not compatible. ( page 4) NO DISC No disc is loaded. OPEN The disc tray is opening.
UX-QD9[A].book 24 ページ 2004年9月6日 月曜日 午後3時21分 For the locations of remote control buttons, refer to page 21. Pausing Playback ■While a disc is being played back ■While a disc is being played back Press Press . Resuming Playback (RESUME) Listening to Discs Stopping Playback . To resume normal playback, press . • Playback cannot be paused by pressing When playback is stopped in the middle, playback can be started from the stopped scene.
UX-QD9[A]-03.fm 25 ページ 2004年9月22日 水曜日 午前11時15分 Introduction (Continued) Basic Operations of the DVD Player For the locations of remote control buttons, refer to page 21. 2 Slow Motion Playback • Refer to "Using the number buttons" ( page 16). (only for moving image) ■While a disc is paused Press or NOTE . • You can operate a VCD or SVCD while the disc is stopped or played back with PBC off. • You can operate a DVD AUDIO, CD, MP3, WMA, or JPEG while the disc is either played back or stopped.
UX-QD9[A].book 26 ページ 2004年9月6日 月曜日 午後3時21分 Convenient Functions of the DVD Player Selecting the Audio ■While a disc containing two or more audio is being played back Remote control mode selector 1 Press AUDIO . Example: TV screen Selected audio/Total number of audio Selected audio AUDIO • Each time you press , the audio will be changed. The audio can also be changed by pressing . Number buttons 2 Wait for a few seconds or press .
UX-QD9[A].book 27 ページ 2004年9月6日 月曜日 午後3時21分 Introduction (Continued) Convenient Functions of the DVD Player Selecting the Subtitle Selecting a View Angle (only for moving image) (only for moving image) ■While a disc containing two or more subtitles is being played back ■While a disc containing two or more view angles is being played back 1 1 Press . Example: TV screen Press .
UX-QD9[A].book 28 ページ 2004年9月6日 月曜日 午後3時21分 For the locations of remote control buttons, refer to page 26. ■While a disc is played back or paused 1 Press . Example: TV screen Current VFP mode USER1 5 Press value. 6 Press 7 Press to change the . • To adjust other items, go back to step 3. . NOTE 0 0 • If no operation is made for several seconds during the procedure, the settings made so far will be automatically stored. • "VFP" stands for "video fine processor".
UX-QD9[A].book 29 ページ 2004年9月6日 月曜日 午後3時21分 Introduction (Continued) Convenient Functions of the DVD Player Adjusting Playback Level (DVD LEVEL) Enjoying Better Pictures (PROGRESSIVE) In the progressive mode, you can enjoy better pictures. The audio of a DVD VIDEO and DVD AUDIO may be recorded at a lower level (volume) than for other types of disc. You can adjust the DVD level. ■While a disc is being played back Press .
UX-QD9[A].book 30 ページ 2004年9月6日 月曜日 午後3時21分 Playing Back the Bonus Group There are some DVD AUDIO discs with a special group, called "bonus group", recorded. Browsable Still Pictures (B.S.P.) There are some DVD AUDIO discs with still pictures recorded. Among the still pictures, there are pictures called B.S.P. (browsable still pictures). You can change these pictures as if turning over pages.
UX-QD9[A]-04.fm 31 ページ 2004年9月7日 火曜日 午前11時40分 Introduction (Continued) Convenient Functions of the DVD Player Playing Back the Disc in the Desired Order (Program Playback) Example: For DVD VIDEO TV screen Program screen You can program a maximum of 99 chapters or tracks. You can program the same chapter or track more than once. ■While a disc is stopped 1 Set the remote control mode selector to AUDIO. 3 Press the number buttons ( or ) to program chapters/ tracks.
UX-QD9[A].book 32 ページ 2004年9月6日 月曜日 午後3時21分 For the locations of remote control buttons, refer to page 26. TV screen 1 Random Playback Listening to Discs Example: For DVD VIDEO 5 You can listen to tracks or chapters in random order. ■ While playback is stopped 1 • Refer to "Using the number buttons" ( page 16). • Before selecting a bonus group of a DVD AUDIO, cancel the "BONUS" display as explained in "Playing back the Bonus Group" on page 30.
UX-QD9[A].book 33 ページ 2004年9月6日 月曜日 午後3時21分 Introduction (Continued) Convenient Functions of the DVD Player Repeat Playback Refer to page 37 for repeat playback of MP3/WMA and JPEG files. ■While a disc is being played back Press . • Each time you press will be changed.
UX-QD9[A]-04.fm 34 ページ 2004年9月22日 水曜日 午前11時16分 Changes time information displayed in the display window on the main unit and Time display selection Remote control mode selector the status bar. Each time is pressed, the display will be changed. DVD VIDEO/DVD AUDIO TOTAL : Elapsed playing time of current title/ group T.
UX-QD9[A]-04.fm 35 ページ 2004年9月7日 火曜日 午前11時30分 Introduction (Continued) Status Bar and Menu Bar For the locations of remote control buttons, refer to page 34. Playing Back the Designated Part Repeatedly (A-B Repeat Playback) ■While a disc is being played back ■While a disc is being played back 1 Press Press 3 4 Press 5 . 2 Press . to select . • The icon on the menu bar will be 3 4 5 • The icon on the menu bar will be .
UX-QD9[A]-04.fm 36 ページ 2004年9月22日 水曜日 午前11時18分 Playback Remote control mode selector Display of an MP3/WMA disc is described here as an example. For a JPEG disc, read "track" as "file". NOTE • When playing back a disc containing both MP3/ WMA and JPEG files, set one of them to be played ( page 38). 1 Insert a disc. Example: TV screen Number buttons This indicator lights up during repeat playback This indicator lights up ( page 37). during program playback Elapsed playing time of ( page 31).
UX-QD9[A].book 37 ページ 2004年9月6日 月曜日 午後3時21分 Introduction (Continued) Playing Back MP3/WMA and JPEG Discs 4 Press 5 Press to select a track. or For the locations of remote control buttons, refer to page 36. Repeat Playback . Example: Display during playback Group number Track number ■While a disc is being played back Press . • Each time you press changed. Elapsed playing time (This indicator is not displayed while a JPEG is loaded.) • At first, a track title (file name) is scrolled.
UX-QD9[A].book 38 ページ 2004年9月6日 月曜日 午後3時21分 LANGUAGE NOTE Number buttons • If the selected language is not recorded on the disc, the optimum language set for the disc appears. • For a language code such as "AA", refer to the "Language Codes" ( page 41). Items Contents MENU LANGUAGE Select the language for the DVD VIDEO menu. AUDIO LANGUAGE Select the audio language for the DVD VIDEO.
UX-QD9[A]-04.fm 39 ページ 2004年9月22日 水曜日 午前11時20分 Introduction (Continued) Preferences AUDIO Items OTHERS Contents ( DIGITAL AUDIO OUTPUT Items : initial setting) Select an output signal type from the following in accordance with the equipment connected to the digital audio output terminal (AV amplifier, etc.). (See the list below for the preference items and output signal.) PCM ONLY: Equipment corresponding only to linear PCM.
UX-QD9[A]-04.
UX-QD9[A].
UX-QD9[A]-04.fm 42 ページ 2004年9月27日 月曜日 午後2時1分 Listening to Cassette Tapes Cassette tape indicator (The cassette tape indicator lights up while the cassette tape is stopped. The cassette tape indicator flashes while the cassette tape is being played back.) Reverse mode Cassette tape playback direction ( : normal direction/ : opposite direction) CAUTION • Before using a cassette tape, wind up any slack in the cassette tape. ( page 52) • Do not use long cassette tapes such as C-120 or C-150.
UX-QD9[A]-04.fm 43 ページ 2004年9月7日 火曜日 午前11時33分 Introduction Listening to Other Equipment Listening to Other Equipment/Recording Sound Adjusting the Sound Input Level from Other Equipment Adjusting the sound input level of the AUX 1 2 Press . Hold down appears. until the input level • Each time you hold down toggles as follows. , the display For ordinary use. (initial setting) For increasing the level. 1 Press 2 Start other equipment playback.
UX-QD9[A].book 44 ページ 2004年9月6日 月曜日 午後3時21分 Main unit Remote control Preventing recorded sound from being erased • Write protect tags are attached to a cassette tape for preventing the erasing of recorded sound. They enable you to avoid losing important recordings because once you snap off the write protect tags, you cannot record to the cassette tape or erase recorded material. • When you want to use the cassette tape for recording again, cover the tag holes with adhesive tape.
UX-QD9[A]-04.fm 45 ページ 2004年9月22日 水曜日 午前11時21分 Introduction (Continued) Recording Sound to Cassette Tapes 3 For the locations of remote control buttons, refer to page 44. Select a sound source for recording. Sound source Operation Disc Press , and then press (The disc is stopped.) Radio broadcast Select the radio station whose broadcast you want to record ( page 19). Sound from other equipment (AUX) 4 Press and prepare playback on the other equipment ( Press . page 43).
UX-QD9[A]-05.fm 46 ページ 2004年9月7日 火曜日 午前11時35分 Using the Timers Recording Sound/Convenient Functions page 16). Sleep Timer When the specified time passes, the main unit automatically turns off. Press Remote control mode selector . • Each time you press , the time display (in minutes) toggles as follows. Cancel (Sleep indicator disappears.
UX-QD9[A].book 47 ページ 2004年9月6日 月曜日 午後3時21分 Introduction (Continued) Using the Timers ONCE : The recording timer works once. EVERYDAY : The recording timer works every day. Recording Timer You can use the recording timer function to record FM/AM broadcasts or sound from other equipment to cassette tape. You can enter up to three timer settings in total for the recording timer and the playback timer ( page 48). • Timer settings remain unchanged until the timer is replaced by new setting.
UX-QD9[A].book 48 ページ 2004年9月6日 月曜日 午後3時21分 Convenient Functions Canceling the recording timer In step 2 on page 47, select the timer number you want to cancel, and then press . Even when you cancel the recording timer, the setting remains stored. Activating the recording timer again In step 2 on page 47, select the timer number you want to activate, and then press repeatedly until all of the setting procedure finishes. Then turn off the main unit.
UX-QD9[A].book 49 ページ 2004年9月6日 月曜日 午後3時21分 Introduction (Continued) Using the Timers 8 9 Press For the locations of remote control buttons, refer to page 46. . Press or to select the sound source you want to play back. Example: When you want to listen to an AM broadcast 10 Press 11 Press . 12 Press . or to adjust the playback volume. • The settings appear in the display window.
50 ページ 2004年9月6日 月曜日 午後3時21分 Auto Standby Disc Ejection Lock Convenient Functions UX-QD9[A].book If no sound is produced for 3 minutes when the disc or cassette tape is selected as a sound source, the main unit automatically turns off. ■When the disc or cassette tape is selected as a sound source You can prohibit ejection of a disc. Press ■When the main unit is turned off . "A. STANDBY" stands for "Auto Standby". While holding down the main unit.
UX-QD9[A]-05.fm 51 ページ 2004年9月22日 水曜日 午前11時23分 Introduction Using AV COMPU LINK The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest operation. If your JVC TV set supports the JVC AV COMPU LINK system, simply starting the main unit will automatically make all necessary settings on the TV to allow you to enjoy the playback. Connection and Setting • Carefully read manuals of equipment to be connected.
UX-QD9[A].book 52 ページ 2004年9月6日 月曜日 午後3時21分 Handling Discs/Cassette Tapes Handling discs Cleaning the main unit cabinet • Do not put adhesive tape or stickers, or write on a disc. • Do not bend a disc. • Be sure not to use heart/flower shaped discs or other irregularly shaped discs. The use of such discs damages the main unit. Cleaning discs Signal surface Wipe a disc from the center outward with a soft cloth. • Gently dust the cabinet surface with a soft dry cloth.
UX-QD9[A]-05.fm 53 ページ 2004年9月22日 水曜日 午前11時25分 Introduction Disc Messages Reference Disc message Meaning Possible solution CANNOT PLAY You are trying to play back an unplayable disc or Replace the disc. a disc that has many scratches. NO DISC No disc is loaded. NO AUDIO The disc may be an illegally copied disc. You cannot listen to the disc. LR ONLY You are playing back a multi-channel track for which down-mix is prohibited. This is normal operation.
UX-QD9[A]-05.fm 54 ページ 2004年9月27日 月曜日 午後2時0分 ■DVD receiver (CA-UXQD9S) Amplifier Output power 20 W + 20 W at 4 Ω (10% THD) Input terminals AUX×1, 500 mV/47 kΩ:LEVEL1 250 mV/47 kΩ:LEVEL2 Output terminals Speaker×1, 20 W/4 Ω Impedance 4 Ω - 16 Ω Headphone (×1), 25 mW/32 Ω Impedance 16 Ω - 1 kΩ DVD/CD optical input × 1 -23 dBm to -15 dBm (Optical square terminal) AV COMPU LINK × 2 (φ 3.5) Tuner Frequency FM:87.50 MHz - 108.
UX-QD9S[A]-BackCov.
Page 1 Wednesday, October 6, 2004 8:48 AM English UX-QD9S[US]-01.fm MICRO COMPONENT SYSTEM 微型组合音响 中 文 UX-QD9S Consists of CA-UXQD9S and SP-UXQD9S 由 CA-UXQD9S 和 SP-UXQD9S 组成 For hiding the demonstration display, refer to page 15.
UX-QD9S[US]-02.fm Page 1 Monday, October 11, 2004 9:58 AM Warnings, Cautions and Others / 警告,注意及其他须知事项 Introduction CAUTION 注意 To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. 为了减少触电、火灾等危险: 1. 请勿擅自卸下螺丝钉、盖子或机壳。 2. 请勿让本机受雨淋或置于潮湿环境中。 CAUTION — F button! 注意- F 开关! Disconnect the mains plug to shut the power off completely. The F button in any position does not disconnect the mains line.
UX-QD9S[US]-02.fm Page 2 Monday, October 11, 2004 9:58 AM CAUTION — Proper Ventilation 注意 — 正确的通风方法 To avoid risk of electric shock and fire and to protect from damage, locate the apparatus as follows: Top/Front/Back/Sides: No obstructions should be placed in the areas shown by the dimensions below. Bottom: Place on the level surface. Maintain adequate air path for ventilation by placing on a stand with a height of 10 cm or more. In addition, maintain the best possible air circulation.
UX-QD9[US].book 1 ページ 2004年10月8日 金曜日 午前10時27分 Table of Contents marks refer to operation used frequently. You can quickly learn the general usage of this product by reading those parts only. Introduction Listening to Radio Broadcasts Notes on Operation ............................. 3 Suitable Locations for the Main Unit ................. Condensation.................................................... Cleaning the Main Unit ..................................... Listener’s Etiquette .................
2004年10月8日 金曜日 午前10時27分 Playing Back MP3/WMA and JPEG Discs ..................................................36 Playback ....................................................36 Repeat Playback........................................37 Preferences .........................................38 Basic Operations .......................................38 LANGUAGE...............................................38 PICTURE ...................................................38 AUDIO ................................
UX-QD9[US].
2004年10月8日 金曜日 午前10時27分 Playable Disc Types This product has been designed to play back the following discs: DVD VIDEO, DVD AUDIO, VCD, SVCD, CD This product can also play back the following discs: • Finalized DVD-R/RW discs recorded in the DVD VIDEO format.
UX-QD9[US].book 5 ページ 2004年10月8日 金曜日 午前10時27分 Introduction (Continued) Notes on Operation About MP3/WMA/JPEG discs Playable MP3/WMA/JPEG discs and files • Discs recorded in the ISO 9660 format are playable (except discs recorded in the "packet write" format (UDF format)). • Discs recorded in the multi-session format are also playable. • Files with an extension of ".mp3", ".wma", ".jpg" or ".jpeg" (extensions with uppercase and lowercase letters mixed are also acceptable) are playable.
6 ページ 2004年10月8日 金曜日 午前10時27分 English UX-QD9[US].book Selecting the Color System Introduction This product is compatible with PAL and NTSC color systems. In standby mode, select PAL or NTSC to match your TV. If the VIDEO OUT SELECT switch is switched over when the power is on, turn off the power, and then turn it on again. • Before playing back a disc, it is also required to select the correct MONITOR TYPE in the PICTURE menu according to the aspect ratio of your TV ( page 38).
UX-QD9[US].book 7 ページ 2004年10月8日 金曜日 午前10時27分 Introduction Special Cautions Avoid high temperatures Do not expose the system to direct sunlight and do not place it near a heating equipment. Notes on Handling ■Important cautions Installation of the system • Select a place which is level, dry and neither too hot nor too cold; between 5°C and 35°C. • Leave sufficient distance between the system and the TV. • Do not use the system in a place subject to vibration.
UX-QD9[US].book 8 ページ 2004年10月8日 金曜日 Part Description 午前10時27分 Introcution/Preparation English The numbers refer to the pages in which the parts are explained. 20 21 22 Introcution/Preparation 18 17 28 42, 44 30 46-49 17 21 50 31-33 20 42 43 Cassette holder: 42 PUSH-OPEN 17 44 15, 18 28 21 17 Remote control sensor: 9 * 25, 30, 37, 45 24, 42 Disc tray: 21 * This terminal is for connecting a pair of headphones equipped with a stereo mini plug (not supplied).
UX-QD9[US].book 9 ページ 2004年10月8日 金曜日 Remote Control 午前10時27分 Introduction Preparation 18 21 The numbers refer to the pages in which the parts are explained.
2004年10月8日 金曜日 午前10時27分 This page is for when operating your TV using the remote control of this product. Operating the TV Using the Remote Control 4 Press number buttons (1-9, 0). Examples: For a Hitachi TV: Press 1, then 0. For a Toshiba TV: Press 0, then 8. If there are two or more manufacturer's codes, try them in turn and select the one that causes the product to work properly.
UX-QD9[US].book 11 ページ 2004年10月8日 金曜日 午前10時27分 Introduction Connections Connect all necessary parts before connecting the power plug. Connecting the Antennas Connecting the AM antenna 1 Vinyl-covered wire: 3 - 5 m (not supplied) Set up the AM antenna (supplied). Insert the tab into the slot. 2 ■When radio reception with the supplied AM loop antenna is poor Twist together vinylcovered wire and the AM loop antenna cord.
12 ページ 2004年10月8日 金曜日 午前10時27分 Connecting the FM antenna Main unit (rear view) ■When radio reception with the supplied FM antenna is poor, or when using a communal antenna Main unit (side view) FM antenna (supplied) Main unit (rear view) Main unit (side view) Antenna cord (not supplied) Stretch out the FM antenna to the best position for radio reception, and then fix it with adhesive tape.
UX-QD9[US].book 13 ページ 2004年10月8日 金曜日 午前10時27分 Introduction (Continued) Connections Connect all necessary parts before connecting the power plug. Connecting the Speakers After connecting the speakers, gently pull on the speaker cords to make sure the cords are firmly connected and do not pull out. Main unit (rear view) Speaker cord Speaker cord Speaker cord Red Red Black Black Left speaker (rear view) Right speaker (rear view) CAUTION • Do not short-circuit the and speaker terminals.
2004年10月8日 金曜日 午前10時27分 Connecting Other Equipment Read this section when connecting other audio equipment to this product. Other audio equipment CAUTION • For details of signals to be output, refer to page 39. • If connecting the main unit to equipment that has the function of a Dolby Digital decoder, the setting in "D. RANGE COMPRESSION" of "AUDIO" ( page 39) will be invalid regarding sound from the digital audio output of the main unit.
UX-QD9[US].book 15 ページ 2004年10月8日 金曜日 午前10時27分 Introduction (Continued) Connections Connect all necessary parts before connecting the power plug. When a Clearer Picture Is Desired Connecting the Power Plug AC outlet You can enjoy pictures of better quality using the following cord instead of the supplied video cord.
UX-QD9[US].book 16 ページ 2004年10月8日 金曜日 午前10時27分 Basic Operations 2 Set the hour. Back Next • Holding down the button causes the hour to increment. • You can use the number buttons to specify the hour. Refer to "Using the number buttons" shown below. Using the number buttons Remote control mode selector Set the remote control mode selector to AUDIO before using the number buttons. Examples: Number buttons 3 Press 3: 13: 20: 23: → → → . • To return to step 2, press 4 → .
UX-QD9[US].book 17 ページ 2004年10月8日 金曜日 午前10時27分 Introduction (Continued) Basic Operations Turning On/Off the Main Unit Press (or Adjusting the Sound Quality Selecting the sound mode on the main unit). • With the power off, pressing either button also turns on the main unit. The function assigned to the button starts working at the same time. Press . • Each time you press gles as follows. Remote control: : For emphasizing treble and bass sounds.
UX-QD9[US].book 18 ページ 2004年10月8日 金曜日 午前10時27分 Basic Operations Press (or on the main unit). • Each time you press gles as follows. , the display tog- : For a rainbow-like pattern. : For a flower-image pattern. : Gradually changes the color pattern in a cycle of approximately 20 seconds. : For an ocean-image pattern. : For a fantasy pattern. : For the color of your choice. (The setting shown on the left is initial setting.
UX-QD9[US].book 19 ページ 2004年10月8日 金曜日 午前10時27分 Listening to Radio Broadcasts Introduction Listening to Radio Broadcasts This product can receive FM and AM radio broadcasts. Setting the AM Tuner Spacing Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing. On the main unit ONLY: Remote control mode selector Number buttons ■When the main unit is turned off To select 10 kHz spacing, while holding down on the main unit, press on the main unit to turn on the power.
2004年10月8日 金曜日 午前10時27分 Selecting a Radio Station 1 Press repeatedly to select "FM" or "AM". Example: Display while an FM radio broadcast is received Stereo indicator Preset number ( on the right) Frequency 2 Press or repeatedly to select a radio station (frequency). • You can also select a radio station using the automatic tuning. Storing Radio Stations (Preset) You can store up to 30 FM radio stations and up to 15 AM radio stations.
UX-QD9[US].book 21 ページ 2004年10月8日 金曜日 午前10時27分 Introduction Basic Operations of the DVD Player Listening to Discs How to read this manual • Operations are described by mainly using the remote control buttons. If there are the same marks on the main unit, the buttons on the main unit can also be used. • The following marks tell you for which type of the discs the operation can be made. • The illustrations and TV screens may be different between the actual case and the description.
2004年10月8日 金曜日 午前10時27分 ■Display for CD ■Display for VCD/SVCD Display while a CD is being played back: CD indicator (The CD indicator lights up while the CD is stopped. The CD indicator flashes while the CD is being played back or paused.) Track number Elapsed playing time Display while a VCD/SVCD is being played back: VCD indicator (The VCD indicator lights up while the VCD/SVCD is stopped. The VCD indicator flashes while the VCD/SVCD is being played back or paused.
UX-QD9[US].book 23 ページ 2004年10月8日 金曜日 午前10時27分 Introduction (Continued) Basic Operations of the DVD Player Listening to Discs Messages displayed on the TV screen While a DVD is selected as the sound source, the messages shown below are displayed, depending on the status. NOW READING The main unit is reading the disc. Wait for a while. REGION CODE ERROR! The disc cannot be played back because its region code is not compatible. ( page 4) NO DISC No disc is loaded. OPEN The disc tray is opening.
UX-QD9[US].book 24 ページ 2004年10月8日 金曜日 午前10時27分 Pausing Playback ■While a disc is being played back ■While a disc is being played back Press Press . Resuming Playback (RESUME) . To resume normal playback, press . • Playback cannot be paused by pressing When playback is stopped in the middle, playback can be started from the stopped scene. How to suspend playback on the main unit during JPEG disc slide-show.
UX-QD9[US].book 25 ページ 2004年10月8日 金曜日 午前10時27分 Introduction (Continued) Basic Operations of the DVD Player For the locations of remote control buttons, refer to page 21. 2 Slow Motion Playback • Refer to "Using the number buttons" ( page 16). (only for moving image) ■While a disc is paused Press or NOTE . • You can operate a VCD or SVCD while the disc is stopped or played back with PBC off. • You can operate a DVD AUDIO, CD, MP3, WMA, or JPEG while the disc is either played back or stopped.
UX-QD9[US].book 26 ページ 2004年10月8日 金曜日 午前10時27分 Convenient Functions of the DVD Player Selecting the Audio ■While a disc containing two or more audio is being played back Remote control mode selector 1 Press AUDIO . Example: TV screen Selected audio/Total number of audio Selected audio AUDIO • Each time you press , the audio will be changed. The audio can also be changed by pressing . Number buttons 2 Wait for a few seconds or press .
UX-QD9[US].book 27 ページ 2004年10月8日 金曜日 午前10時27分 Introduction (Continued) Convenient Functions of the DVD Player Selecting the Subtitle Selecting a View Angle (only for moving image) (only for moving image) ■While a disc containing two or more subtitles is being played back ■While a disc containing two or more view angles is being played back 1 1 Press . Example: TV screen Press .
UX-QD9[US].book 28 ページ 2004年10月8日 金曜日 午前10時27分 ■While a disc is played back or paused 1 Press . Example: TV screen Current VFP mode USER1 5 Press value. 6 Press 7 Press to change the . • To adjust other items, go back to step 3. . NOTE 0 0 • If no operation is made for several seconds during the procedure, the settings made so far will be automatically stored. • "VFP" stands for "video fine processor".
UX-QD9[US].book 29 ページ 2004年10月8日 金曜日 午前10時27分 Introduction (Continued) Convenient Functions of the DVD Player Adjusting Playback Level (DVD LEVEL) Enjoying Better Pictures (PROGRESSIVE) In the progressive mode, you can enjoy better pictures. The audio of a DVD VIDEO and DVD AUDIO may be recorded at a lower level (volume) than for other types of disc. You can adjust the DVD level. ■While a disc is being played back Press .
UX-QD9[US].book 30 ページ 2004年10月8日 金曜日 午前10時27分 There are some DVD AUDIO discs with a special group, called "bonus group", recorded. Browsable Still Pictures (B.S.P.) There are some DVD AUDIO discs with still pictures recorded. Among the still pictures, there are pictures called B.S.P. (browsable still pictures). You can change these pictures as if turning over pages. Bonus indicator • This operation can be carried out when "BONUS" is lit in the display window on the main unit. B.S.P.
UX-QD9[US].book 31 ページ 2004年10月8日 金曜日 午前10時27分 Introduction (Continued) Convenient Functions of the DVD Player Playing Back the Disc in the Desired Order (Program Playback) Example: For DVD VIDEO TV screen Program screen You can program a maximum of 99 chapters or tracks. You can program the same chapter or track more than once. ■While a disc is stopped 1 Set the remote control mode selector to AUDIO. 3 Press the number buttons ( or ) to program chapters/ tracks.
UX-QD9[US].book 32 ページ 2004年10月8日 金曜日 午前10時27分 Example: For DVD VIDEO TV screen 1 English For the locations of remote control buttons, refer to page 26. Random Playback 5 Listening to Discs You can listen to tracks or chapters in random order. ■ While playback is stopped 1 • Refer to "Using the number buttons" ( page 16). • Before selecting a bonus group of a DVD AUDIO, cancel the "BONUS" display as explained in "Playing back the Bonus Group" on page 30.
UX-QD9[US].book 33 ページ 2004年10月8日 金曜日 午前10時27分 Introduction (Continued) Convenient Functions of the DVD Player Repeat Playback Refer to page 37 for repeat playback of MP3/WMA and JPEG files. ■While a disc is being played back Press . • Each time you press will be changed.
UX-QD9[US].book 34 ページ 2004年10月8日 金曜日 午前10時27分 Time display selection Remote control mode selector the status bar. Each time is pressed, the display will be changed. DVD VIDEO/DVD AUDIO TOTAL : Elapsed playing time of current title/ group T.
UX-QD9[US].book 35 ページ 2004年10月8日 金曜日 午前10時27分 Introduction (Continued) Status Bar and Menu Bar For the locations of remote control buttons, refer to page 34. Playing Back the Designated Part Repeatedly (A-B Repeat Playback) ■While a disc is being played back ■While a disc is being played back 1 Press Press 3 4 Press 5 . 2 Press . to select . • The icon on the menu bar will be 3 4 5 • The icon on the menu bar will be .
UX-QD9[US].book 36 ページ 2004年10月8日 金曜日 午前10時27分 Playback Remote control mode selector Display of an MP3/WMA disc is described here as an example. For a JPEG disc, read "track" as "file". NOTE • When playing back a disc containing both MP3/ WMA and JPEG files, set one of them to be played ( page 38). 1 Insert a disc. Example: TV screen Number buttons This indicator lights up during repeat playback This indicator lights up ( page 37). during program playback Elapsed playing time of ( page 31).
UX-QD9[US].book 37 ページ 2004年10月8日 金曜日 午前10時27分 Introduction (Continued) Playing Back MP3/WMA and JPEG Discs 4 Press 5 Press to select a track. or For the locations of remote control buttons, refer to page 36. Repeat Playback . Example: Display during playback Group number Track number ■While a disc is being played back Press . • Each time you press changed. Elapsed playing time (This indicator is not displayed while a JPEG is loaded.) • At first, a track title (file name) is scrolled.
UX-QD9[US].book 38 ページ 2004年10月8日 金曜日 午前10時27分 English Preferences LANGUAGE Number buttons Items Contents MENU LANGUAGE Select the language for the DVD VIDEO menu. AUDIO LANGUAGE Select the audio language for the DVD VIDEO. SUBTITLE ON SCREEN LANGUAGE You can change the initial settings of this product according to the environment the product is used in. CAUTION • Set the remote control mode selector to AUDIO before using the number buttons. NOTE Select the subtitle language for the DVD VIDEO.
UX-QD9[US].book 39 ページ 2004年10月8日 金曜日 午前10時27分 Introduction (Continued) Preferences AUDIO Items OTHERS Contents ( DIGITAL AUDIO OUTPUT Items : initial setting) Select an output signal type from the following in accordance with the equipment connected to the digital audio output terminal (AV amplifier, etc.). (See the list below for the preference items and output signal.) PCM ONLY: Equipment corresponding only to linear PCM.
UX-QD9[US].
UX-QD9[US].
UX-QD9[US].book 42 ページ 2004年10月8日 金曜日 午前10時27分 Listening to Cassette Tapes Reverse mode Cassette tape playback direction ( : normal direction/ : opposite direction) CAUTION • Before using a cassette tape, wind up any slack in the cassette tape. ( page 52) • Do not use long cassette tapes such as C-120 or C-150. Long cassette tapes are thin and stretch easily, and may become tangled in the inner part of the main unit. • This product is compatible with playback of TYPE I cassette tapes.
UX-QD9[US].book 43 ページ 2004年10月8日 金曜日 午前10時27分 Introduction Listening to Other Equipment Listening to Other Equipment/Recording Sound Adjusting the Sound Input Level from Other Equipment Adjusting the sound input level of the AUX 1 2 Press . Hold down appears. until the input level • Each time you hold down toggles as follows. , the display For ordinary use. (initial setting) For increasing the level. 1 Press 2 Start other equipment playback.
UX-QD9[US].book 44 ページ 2004年10月8日 金曜日 午前10時27分 Remote control Preventing recorded sound from being erased • Write protect tags are attached to a cassette tape for preventing the erasing of recorded sound. They enable you to avoid losing important recordings because once you snap off the write protect tags, you cannot record to the cassette tape or erase recorded material. • When you want to use the cassette tape for recording again, cover the tag holes with adhesive tape.
UX-QD9[US].book 45 ページ 2004年10月8日 金曜日 午前10時27分 Introduction (Continued) Recording Sound to Cassette Tapes 3 For the locations of remote control buttons, refer to page 44. Select a sound source for recording. Sound source Operation Disc Press , and then press (The disc is stopped.) Radio broadcast Select the radio station whose broadcast you want to record ( page 19). Sound from other equipment (AUX) 4 Press and prepare playback on the other equipment ( Press . page 43).
UX-QD9[US].book 46 ページ 2004年10月8日 金曜日 午前10時27分 Using the Timers Recording Sound/Convenient Functions page 16). English Set the clock beforehand ( Sleep Timer Press Remote control mode selector . • Each time you press , the time display (in minutes) toggles as follows. Cancel (Sleep indicator disappears.) Example: Display while the sleep timer is set to 60 minutes Sleep indicator Number buttons NOTE • When you set the sleep timer, the display window automatically dims.
UX-QD9[US].book 47 ページ 2004年10月8日 金曜日 午前10時27分 Introduction (Continued) Using the Timers ONCE : The recording timer works once. EVERYDAY : The recording timer works every day. Recording Timer You can use the recording timer function to record FM/AM broadcasts or sound from other equipment to cassette tape. You can enter up to three timer settings in total for the recording timer and the playback timer ( page 48). • Timer settings remain unchanged until the timer is replaced by new setting.
UX-QD9[US].book 48 ページ 2004年10月8日 金曜日 午前10時27分 Convenient Functions In step 2 on page 47, select the timer number you want to cancel, and then press . Even when you cancel the recording timer, the setting remains stored. Activating the recording timer again In step 2 on page 47, select the timer number you want to activate, and then press repeatedly until all of the setting procedure finishes. Then turn off the main unit.
UX-QD9[US].book 49 ページ 2004年10月8日 金曜日 午前10時27分 Introduction (Continued) Using the Timers 8 9 Press For the locations of remote control buttons, refer to page 46. . Press or to select the sound source you want to play back. Example: When you want to listen to an AM broadcast 10 Press 11 Press . 12 Press . or to adjust the playback volume. • The settings appear in the display window.
UX-QD9[US].book 50 ページ 2004年10月8日 金曜日 午前10時27分 Disc Ejection Lock Convenient Functions English Auto Standby If no sound is produced for 3 minutes when the disc or cassette tape is selected as a sound source, the main unit automatically turns off. ■When the disc or cassette tape is selected as a sound source You can prohibit ejection of a disc. Press ■When the main unit is turned off . "A. STANDBY" stands for "Auto Standby". While holding down the main unit.
UX-QD9[US].book 51 ページ 2004年10月8日 金曜日 午前10時27分 Introduction Using AV COMPU LINK The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest operation. If your JVC TV set supports the JVC AV COMPU LINK system, simply starting the main unit will automatically make all necessary settings on the TV to allow you to enjoy the playback. Connection and Setting • Carefully read manuals of equipment to be connected.
UX-QD9[US].book 52 ページ 2004年10月8日 金曜日 午前10時27分 Handling Discs/Cassette Tapes Cleaning the main unit cabinet Cleaning discs Signal surface Wipe a disc from the center outward with a soft cloth. • Gently dust the cabinet surface with a soft dry cloth. When the cabinet is very dirty, dampen the cloth with a neutral detergent diluted with water, wring out the cloth well, and then wipe the cabinet with the dampened cloth followed by a soft dry cloth. • Do not wipe the cabinet with thinners or benzenes.
UX-QD9[US].book 53 ページ 2004年10月8日 金曜日 午前10時27分 Introduction Disc Messages Reference Disc message Meaning Possible solution CANNOT PLAY You are trying to play back an unplayable disc or Replace the disc. a disc that has many scratches. NO DISC No disc is loaded. NO AUDIO The disc may be an illegally copied disc. You cannot listen to the disc. LR ONLY You are playing back a multi-channel track for which down-mix is prohibited. This is normal operation.
UX-QD9[US].book 54 ページ 2004年10月8日 金曜日 午前10時27分 ■DVD receiver (CA-UXQD9S) Amplifier Output power 20 W + 20 W at 4 Ω (10% THD) Input terminals AUX×1, 500 mV/47 kΩ:LEVEL1 250 mV/47 kΩ:LEVEL2 Output terminals Speaker×1, 20 W/4 Ω Impedance 4 Ω - 16 Ω Headphone (×1), 25 mW/32 Ω Impedance 16 Ω - 1 kΩ DVD/CD optical input × 1 -23 dBm to -15 dBm (Optical square terminal) AV COMPU LINK × 2 (φ 3.5) Tuner Frequency FM:87.50 MHz - 108.
UX-QD9S[US]-BackCov.
Page 1 Wednesday, September 8, 2004 9:04 AM English UX-QD9S[UN]-01.fm MICRO COMPONENT SYSTEM 微型组合音响 中 文 UX-QD9S Consists of CA-UXQD9S and SP-UXQD9S 由 CA-UXQD9S 和 SP-UXQD9S 组成 For hiding the demonstration display, refer to page 15.
UX-QD9S[UN]-02.fm Page 1 Wednesday, September 8, 2004 9:08 AM Warnings, Cautions and Others / 警告,注意及其他须知事项 Introduction CAUTION 注意 To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. 为了减少触电、火灾等危险: 1. 请勿擅自卸下螺丝钉、盖子或机壳。 2. 请勿让本机受雨淋或置于潮湿环境中。 CAUTION — F button! 注意- F 开关! Disconnect the mains plug to shut the power off completely. The F button in any position does not disconnect the mains line.
UX-QD9S[UN]-02.fm Page 2 Wednesday, September 8, 2004 9:08 AM CAUTION — Proper Ventilation 注意 — 正确的通风方法 To avoid risk of electric shock and fire and to protect from damage, locate the apparatus as follows: Top/Front/Back/Sides: No obstructions should be placed in the areas shown by the dimensions below. Bottom: Place on the level surface. Maintain adequate air path for ventilation by placing on a stand with a height of 10 cm or more. In addition, maintain the best possible air circulation.
UX-QD9[UN].book 1 ページ 2004年9月28日 火曜日 午前10時54分 Table of Contents marks refer to operation used frequently. You can quickly learn the general usage of this product by reading those parts only. Introduction Listening to Radio Broadcasts Notes on Operation ............................. 3 Suitable Locations for the Main Unit ................. Condensation.................................................... Cleaning the Main Unit ..................................... Listener’s Etiquette .................
2004年9月28日 火曜日 午前11時12分 Playing Back MP3/WMA and JPEG Discs ..................................................36 Playback ....................................................36 Repeat Playback........................................37 Preferences .........................................38 Basic Operations .......................................38 LANGUAGE...............................................38 PICTURE ...................................................38 AUDIO ................................
UX-QD9[UN].
2004年9月28日 火曜日 午前10時54分 Playable Disc Types This product has been designed to play back the following discs: DVD VIDEO, DVD AUDIO, VCD, SVCD, CD This product can also play back the following discs: • Finalized DVD-R/RW discs recorded in the DVD VIDEO format.
UX-QD9[UN].book 5 ページ 2004年9月28日 火曜日 午前10時54分 Introduction (Continued) Notes on Operation About MP3/WMA/JPEG discs Playable MP3/WMA/JPEG discs and files • Discs recorded in the ISO 9660 format are playable (except discs recorded in the "packet write" format (UDF format)). • Discs recorded in the multi-session format are also playable. • Files with an extension of ".mp3", ".wma", ".jpg" or ".jpeg" (extensions with uppercase and lowercase letters mixed are also acceptable) are playable.
6 ページ 2004年9月28日 火曜日 午前10時54分 English UX-QD9[UN].book Selecting the Color System Introduction This product is compatible with PAL and NTSC color systems. In standby mode, select PAL or NTSC to match your TV. If the VIDEO OUT SELECT switch is switched over when the power is on, turn off the power, and then turn it on again. • Before playing back a disc, it is also required to select the correct MONITOR TYPE in the PICTURE menu according to the aspect ratio of your TV ( page 38).
UX-QD9[UN].book 7 ページ 2004年9月28日 火曜日 午前10時54分 Introduction Special Cautions Avoid high temperatures Do not expose the system to direct sunlight and do not place it near a heating equipment. Notes on Handling ■Important cautions Installation of the system • Select a place which is level, dry and neither too hot nor too cold; between 5°C and 35°C. • Leave sufficient distance between the system and the TV. • Do not use the system in a place subject to vibration.
UX-QD9[UN].book 8 ページ 2004年9月28日 火曜日 Part Description 午前10時54分 Introcution/Preparation English The numbers refer to the pages in which the parts are explained. 20 21 22 Introcution/Preparation 18 17 28 42, 44 30 46-49 17 21 50 31-33 20 42 43 Cassette holder: 42 PUSH-OPEN 17 44 15, 18 28 21 17 Remote control sensor: 9 * 25, 30, 37, 45 24, 42 Disc tray: 21 * This terminal is for connecting a pair of headphones equipped with a stereo mini plug (not supplied).
UX-QD9[UN].book 9 ページ 2004年9月28日 火曜日 Remote Control 午前10時54分 Introduction Preparation 18 21 The numbers refer to the pages in which the parts are explained.
2004年9月28日 火曜日 午前10時54分 This page is for when operating your TV using the remote control of this product. Operating the TV Using the Remote Control 4 Press number buttons (1-9, 0). Examples: For a Hitachi TV: Press 1, then 0. For a Toshiba TV: Press 0, then 8. If there are two or more manufacturer's codes, try them in turn and select the one that causes the product to work properly.
UX-QD9[UN].book 11 ページ 2004年9月28日 火曜日 午前10時54分 Introduction Connections Connect all necessary parts before connecting the power plug. Connecting the Antennas Connecting the AM antenna 1 Vinyl-covered wire: 3 - 5 m (not supplied) Set up the AM antenna (supplied). Insert the tab into the slot. 2 ■When radio reception with the supplied AM loop antenna is poor Twist together vinylcovered wire and the AM loop antenna cord.
12 ページ 2004年9月28日 火曜日 午前10時54分 Connecting the FM antenna Main unit (rear view) ■When radio reception with the supplied FM antenna is poor, or when using a communal antenna Main unit (side view) FM antenna (supplied) Main unit (rear view) Main unit (side view) Antenna cord (not supplied) Stretch out the FM antenna to the best position for radio reception, and then fix it with adhesive tape.
UX-QD9[UN].book 13 ページ 2004年9月28日 火曜日 午前10時54分 Introduction (Continued) Connections Connect all necessary parts before connecting the power plug. Connecting the Speakers After connecting the speakers, gently pull on the speaker cords to make sure the cords are firmly connected and do not pull out. Main unit (rear view) Speaker cord Speaker cord Speaker cord Red Red Black Black Left speaker (rear view) Right speaker (rear view) CAUTION • Do not short-circuit the and speaker terminals.
2004年9月28日 火曜日 午前10時54分 Connecting Other Equipment Read this section when connecting other audio equipment to this product. Other audio equipment CAUTION • For details of signals to be output, refer to page 39. • If connecting the main unit to equipment that has the function of a Dolby Digital decoder, the setting in "D. RANGE COMPRESSION" of "AUDIO" ( page 39) will be invalid regarding sound from the digital audio output of the main unit.
UX-QD9[UN].book 15 ページ 2004年9月28日 火曜日 午前10時54分 Introduction (Continued) Connections Connect all necessary parts before connecting the power plug. When a Clearer Picture Is Desired Connecting the Power Plug AC outlet You can enjoy pictures of better quality using the following cord instead of the supplied video cord.
UX-QD9[UN].book 16 ページ 2004年9月28日 火曜日 午前10時54分 Basic Operations 2 Set the hour. Back Next • Holding down the button causes the hour to increment. • You can use the number buttons to specify the hour. Refer to "Using the number buttons" shown below. Using the number buttons Remote control mode selector Set the remote control mode selector to AUDIO before using the number buttons. Examples: Number buttons 3 Press 3: 13: 20: 23: → → → . • To return to step 2, press 4 → .
UX-QD9[UN].book 17 ページ 2004年9月28日 火曜日 午前10時54分 Introduction (Continued) Basic Operations Turning On/Off the Main Unit Press (or Adjusting the Sound Quality Selecting the sound mode on the main unit). • With the power off, pressing either button also turns on the main unit. The function assigned to the button starts working at the same time. Press . • Each time you press gles as follows. Remote control: : For emphasizing treble and bass sounds.
UX-QD9[UN].book 18 ページ 2004年9月28日 火曜日 午前10時54分 Basic Operations Press (or on the main unit). • Each time you press gles as follows. , the display tog- : For a rainbow-like pattern. : For a flower-image pattern. : Gradually changes the color pattern in a cycle of approximately 20 seconds. : For an ocean-image pattern. : For a fantasy pattern. : For the color of your choice. (The setting shown on the left is initial setting.
UX-QD9[UN].book 19 ページ 2004年9月28日 火曜日 午前10時54分 Listening to Radio Broadcasts Introduction Listening to Radio Broadcasts This product can receive FM and AM radio broadcasts. Setting the AM Tuner Spacing Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing. On the main unit ONLY: Remote control mode selector Number buttons ■When the main unit is turned off To select 10 kHz spacing, while holding down on the main unit, press on the main unit to turn on the power.
2004年9月28日 火曜日 午前10時54分 Selecting a Radio Station 1 Press repeatedly to select "FM" or "AM". Example: Display while an FM radio broadcast is received Stereo indicator Preset number ( on the right) Frequency 2 Press or repeatedly to select a radio station (frequency). • You can also select a radio station using the automatic tuning. Storing Radio Stations (Preset) You can store up to 30 FM radio stations and up to 15 AM radio stations.
UX-QD9[UN].book 21 ページ 2004年9月28日 火曜日 午前10時54分 Introduction Basic Operations of the DVD Player Listening to Discs How to read this manual • Operations are described by mainly using the remote control buttons. If there are the same marks on the main unit, the buttons on the main unit can also be used. • The following marks tell you for which type of the discs the operation can be made. • The illustrations and TV screens may be different between the actual case and the description.
2004年9月28日 火曜日 午前10時54分 ■Display for CD ■Display for VCD/SVCD Display while a CD is being played back: CD indicator (The CD indicator lights up while the CD is stopped. The CD indicator flashes while the CD is being played back or paused.) Track number Elapsed playing time Display while a VCD/SVCD is being played back: VCD indicator (The VCD indicator lights up while the VCD/SVCD is stopped. The VCD indicator flashes while the VCD/SVCD is being played back or paused.
UX-QD9[UN].book 23 ページ 2004年9月28日 火曜日 午前10時54分 Introduction (Continued) Basic Operations of the DVD Player Listening to Discs Messages displayed on the TV screen While a DVD is selected as the sound source, the messages shown below are displayed, depending on the status. NOW READING The main unit is reading the disc. Wait for a while. REGION CODE ERROR! The disc cannot be played back because its region code is not compatible. ( page 4) NO DISC No disc is loaded. OPEN The disc tray is opening.
UX-QD9[UN].book 24 ページ 2004年9月28日 火曜日 午前10時54分 Pausing Playback ■While a disc is being played back ■While a disc is being played back Press Press . Resuming Playback (RESUME) . To resume normal playback, press . • Playback cannot be paused by pressing When playback is stopped in the middle, playback can be started from the stopped scene. How to suspend playback on the main unit during JPEG disc slide-show.
UX-QD9[UN].book 25 ページ 2004年9月28日 火曜日 午前10時54分 Introduction (Continued) Basic Operations of the DVD Player For the locations of remote control buttons, refer to page 21. 2 Slow Motion Playback • Refer to "Using the number buttons" ( page 16). (only for moving image) ■While a disc is paused Press or NOTE . • You can operate a VCD or SVCD while the disc is stopped or played back with PBC off. • You can operate a DVD AUDIO, CD, MP3, WMA, or JPEG while the disc is either played back or stopped.
UX-QD9[UN].book 26 ページ 2004年9月28日 火曜日 午前10時54分 Convenient Functions of the DVD Player Selecting the Audio ■While a disc containing two or more audio is being played back Remote control mode selector 1 Press AUDIO . Example: TV screen Selected audio/Total number of audio Selected audio AUDIO • Each time you press , the audio will be changed. The audio can also be changed by pressing . Number buttons 2 Wait for a few seconds or press .
UX-QD9[UN].book 27 ページ 2004年9月28日 火曜日 午前10時54分 Introduction (Continued) Convenient Functions of the DVD Player Selecting the Subtitle Selecting a View Angle (only for moving image) (only for moving image) ■While a disc containing two or more subtitles is being played back ■While a disc containing two or more view angles is being played back 1 1 Press . Example: TV screen Press .
UX-QD9[UN].book 28 ページ 2004年9月28日 火曜日 午前10時54分 ■While a disc is played back or paused 1 Press . Example: TV screen Current VFP mode USER1 5 Press value. 6 Press 7 Press to change the . • To adjust other items, go back to step 3. . NOTE 0 0 • If no operation is made for several seconds during the procedure, the settings made so far will be automatically stored. • "VFP" stands for "video fine processor".
UX-QD9[UN].book 29 ページ 2004年9月28日 火曜日 午前10時54分 Introduction (Continued) Convenient Functions of the DVD Player Adjusting Playback Level (DVD LEVEL) Enjoying Better Pictures (PROGRESSIVE) In the progressive mode, you can enjoy better pictures. The audio of a DVD VIDEO and DVD AUDIO may be recorded at a lower level (volume) than for other types of disc. You can adjust the DVD level. ■While a disc is being played back Press .
UX-QD9[UN].book 30 ページ 2004年9月28日 火曜日 午前10時54分 There are some DVD AUDIO discs with a special group, called "bonus group", recorded. Browsable Still Pictures (B.S.P.) There are some DVD AUDIO discs with still pictures recorded. Among the still pictures, there are pictures called B.S.P. (browsable still pictures). You can change these pictures as if turning over pages. Bonus indicator • This operation can be carried out when "BONUS" is lit in the display window on the main unit. B.S.P.
UX-QD9[UN].book 31 ページ 2004年9月28日 火曜日 午前10時54分 Introduction (Continued) Convenient Functions of the DVD Player Playing Back the Disc in the Desired Order (Program Playback) Example: For DVD VIDEO TV screen Program screen You can program a maximum of 99 chapters or tracks. You can program the same chapter or track more than once. ■While a disc is stopped 1 Set the remote control mode selector to AUDIO. 3 Press the number buttons ( or ) to program chapters/ tracks.
UX-QD9[UN].book 32 ページ 2004年9月28日 火曜日 午前10時54分 Example: For DVD VIDEO TV screen 1 English For the locations of remote control buttons, refer to page 26. Random Playback 5 Listening to Discs You can listen to tracks or chapters in random order. ■ While playback is stopped 1 • Refer to "Using the number buttons" ( page 16). • Before selecting a bonus group of a DVD AUDIO, cancel the "BONUS" display as explained in "Playing back the Bonus Group" on page 30.
UX-QD9[UN].book 33 ページ 2004年9月28日 火曜日 午前10時54分 Introduction (Continued) Convenient Functions of the DVD Player Repeat Playback Refer to page 37 for repeat playback of MP3/WMA and JPEG files. ■While a disc is being played back Press . • Each time you press will be changed.
UX-QD9[UN].book 34 ページ 2004年9月28日 火曜日 午前10時54分 Time display selection Remote control mode selector the status bar. Each time is pressed, the display will be changed. DVD VIDEO/DVD AUDIO TOTAL : Elapsed playing time of current title/ group T.
UX-QD9[UN].book 35 ページ 2004年9月28日 火曜日 午前10時54分 Introduction (Continued) Status Bar and Menu Bar For the locations of remote control buttons, refer to page 34. Playing Back the Designated Part Repeatedly (A-B Repeat Playback) ■While a disc is being played back ■While a disc is being played back 1 Press Press 3 4 Press 5 . 2 Press . to select . • The icon on the menu bar will be 3 4 5 • The icon on the menu bar will be .
UX-QD9[UN].book 36 ページ 2004年9月28日 火曜日 午前10時54分 Playback Remote control mode selector Display of an MP3/WMA disc is described here as an example. For a JPEG disc, read "track" as "file". NOTE • When playing back a disc containing both MP3/ WMA and JPEG files, set one of them to be played ( page 38). 1 Insert a disc. Example: TV screen Number buttons This indicator lights up during repeat playback This indicator lights up ( page 37). during program playback Elapsed playing time of ( page 31).
UX-QD9[UN].book 37 ページ 2004年9月28日 火曜日 午前10時54分 Introduction (Continued) Playing Back MP3/WMA and JPEG Discs 4 Press 5 Press to select a track. or For the locations of remote control buttons, refer to page 36. Repeat Playback . Example: Display during playback Group number Track number ■While a disc is being played back Press . • Each time you press changed. Elapsed playing time (This indicator is not displayed while a JPEG is loaded.) • At first, a track title (file name) is scrolled.
UX-QD9[UN].book 38 ページ 2004年9月28日 火曜日 午前10時54分 English Preferences LANGUAGE Number buttons Items Contents MENU LANGUAGE Select the language for the DVD VIDEO menu. AUDIO LANGUAGE Select the audio language for the DVD VIDEO. SUBTITLE ON SCREEN LANGUAGE You can change the initial settings of this product according to the environment the product is used in. CAUTION • Set the remote control mode selector to AUDIO before using the number buttons. NOTE Select the subtitle language for the DVD VIDEO.
UX-QD9[UN].book 39 ページ 2004年9月28日 火曜日 午前10時54分 Introduction (Continued) Preferences AUDIO Items OTHERS Contents ( DIGITAL AUDIO OUTPUT Items : initial setting) Select an output signal type from the following in accordance with the equipment connected to the digital audio output terminal (AV amplifier, etc.). (See the list below for the preference items and output signal.) PCM ONLY: Equipment corresponding only to linear PCM.
UX-QD9[UN].
UX-QD9[UN].
UX-QD9[UN].book 42 ページ 2004年9月28日 火曜日 午前10時54分 Listening to Cassette Tapes Reverse mode Cassette tape playback direction ( : normal direction/ : opposite direction) CAUTION • Before using a cassette tape, wind up any slack in the cassette tape. ( page 52) • Do not use long cassette tapes such as C-120 or C-150. Long cassette tapes are thin and stretch easily, and may become tangled in the inner part of the main unit. • This product is compatible with playback of TYPE I cassette tapes.
UX-QD9[UN].book 43 ページ 2004年9月28日 火曜日 午前10時54分 Introduction Listening to Other Equipment Listening to Other Equipment/Recording Sound Adjusting the Sound Input Level from Other Equipment Adjusting the sound input level of the AUX 1 2 Press . Hold down appears. until the input level • Each time you hold down toggles as follows. , the display For ordinary use. (initial setting) For increasing the level. 1 Press 2 Start other equipment playback.
UX-QD9[UN].book 44 ページ 2004年9月28日 火曜日 午前10時54分 Remote control Preventing recorded sound from being erased • Write protect tags are attached to a cassette tape for preventing the erasing of recorded sound. They enable you to avoid losing important recordings because once you snap off the write protect tags, you cannot record to the cassette tape or erase recorded material. • When you want to use the cassette tape for recording again, cover the tag holes with adhesive tape.
UX-QD9[UN].book 45 ページ 2004年9月28日 火曜日 午前10時54分 Introduction (Continued) Recording Sound to Cassette Tapes 3 For the locations of remote control buttons, refer to page 44. Select a sound source for recording. Sound source Operation Disc Press , and then press (The disc is stopped.) Radio broadcast Select the radio station whose broadcast you want to record ( page 19). Sound from other equipment (AUX) 4 Press and prepare playback on the other equipment ( Press . page 43).
UX-QD9[UN].book 46 ページ 2004年9月28日 火曜日 午前10時54分 Using the Timers Recording Sound/Convenient Functions page 16). English Set the clock beforehand ( Sleep Timer Press Remote control mode selector . • Each time you press , the time display (in minutes) toggles as follows. Cancel (Sleep indicator disappears.) Example: Display while the sleep timer is set to 60 minutes Sleep indicator Number buttons NOTE • When you set the sleep timer, the display window automatically dims.
UX-QD9[UN].book 47 ページ 2004年9月28日 火曜日 午前10時54分 Introduction (Continued) Using the Timers ONCE : The recording timer works once. EVERYDAY : The recording timer works every day. Recording Timer You can use the recording timer function to record FM/AM broadcasts or sound from other equipment to cassette tape. You can enter up to three timer settings in total for the recording timer and the playback timer ( page 48). • Timer settings remain unchanged until the timer is replaced by new setting.
UX-QD9[UN].book 48 ページ 2004年9月28日 火曜日 午前10時54分 Convenient Functions In step 2 on page 47, select the timer number you want to cancel, and then press . Even when you cancel the recording timer, the setting remains stored. Activating the recording timer again In step 2 on page 47, select the timer number you want to activate, and then press repeatedly until all of the setting procedure finishes. Then turn off the main unit.
UX-QD9[UN].book 49 ページ 2004年9月28日 火曜日 午前10時54分 Introduction (Continued) Using the Timers 8 9 Press For the locations of remote control buttons, refer to page 46. . Press or to select the sound source you want to play back. Example: When you want to listen to an AM broadcast 10 Press 11 Press . 12 Press . or to adjust the playback volume. • The settings appear in the display window.
UX-QD9[UN].book 50 ページ 2004年9月28日 火曜日 午前10時54分 Disc Ejection Lock Convenient Functions English Auto Standby If no sound is produced for 3 minutes when the disc or cassette tape is selected as a sound source, the main unit automatically turns off. ■When the disc or cassette tape is selected as a sound source You can prohibit ejection of a disc. Press ■When the main unit is turned off . "A. STANDBY" stands for "Auto Standby". While holding down the main unit.
UX-QD9[UN].book 51 ページ 2004年9月28日 火曜日 午前10時54分 Introduction Using AV COMPU LINK The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest operation. If your JVC TV set supports the JVC AV COMPU LINK system, simply starting the main unit will automatically make all necessary settings on the TV to allow you to enjoy the playback. Connection and Setting • Carefully read manuals of equipment to be connected.
UX-QD9[UN].book 52 ページ 2004年9月28日 火曜日 午前10時54分 Handling Discs/Cassette Tapes Cleaning the main unit cabinet Cleaning discs Signal surface Wipe a disc from the center outward with a soft cloth. • Gently dust the cabinet surface with a soft dry cloth. When the cabinet is very dirty, dampen the cloth with a neutral detergent diluted with water, wring out the cloth well, and then wipe the cabinet with the dampened cloth followed by a soft dry cloth. • Do not wipe the cabinet with thinners or benzenes.
UX-QD9[UN].book 53 ページ 2004年9月28日 火曜日 午前10時54分 Introduction Disc Messages Reference Disc message Meaning Possible solution CANNOT PLAY You are trying to play back an unplayable disc or Replace the disc. a disc that has many scratches. NO DISC No disc is loaded. NO AUDIO The disc may be an illegally copied disc. You cannot listen to the disc. LR ONLY You are playing back a multi-channel track for which down-mix is prohibited. This is normal operation.
UX-QD9[UN]-05.fm 54 ページ 2004年10月4日 月曜日 午前10時3分 ■DVD receiver (CA-UXQD9S) Amplifier Output power 20 W + 20 W at 4 Ω (10% THD) Input terminals AUX×1, 500 mV/47 kΩ:LEVEL1 250 mV/47 kΩ:LEVEL2 Output terminals Speaker×1, 20 W/4 Ω Impedance 4 Ω - 16 Ω Headphone (×1), 25 mW/32 Ω Impedance 16 Ω - 1 kΩ DVD/CD optical input × 1 -23 dBm to -15 dBm (Optical square terminal) AV COMPU LINK × 2 (φ 3.5) Tuner Frequency FM:87.50 MHz - 108.
UX-QD9S[UN]-BackCov.