Owner's Manual

17
Connection
Connection
When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Make sure the cables are firmly inserted.
In the connection illustrations shown below, cables are not included with the projector (see "Shipping
contents"). They are commercially available from electronics stores.
Only HDMI 1 connector supports 4K (Ultra HD)/HDR.
Use a certified Premium High Speed HDMI Cable (18 Gbps compatible) and connect to HDMI 1 terminal
when inputting 4K video signals from an external device.
Terminal HDCP ver. Used for
HDMI 1 2.2 4K/HDR source
HDMI 2 1.4 Up to 4K/30Hz source
1
2 2
Notebook or desktop computer
A/V device
or
1. VGA cable
2. HDMI cable