OperationManual
Table Of Contents
- Getting Started
- Set up
- Operate
- Adjust/Set
- Adjusting the Image Quality
- Adjusting the Output Value of the Projected Image (Gamma)
- Fine-tuning to the Preferred Gamma Setting
- Reducing the After-image of Fast-moving Images (Blur Reduction)
- Adjusting the Contrast (Lens Aperture)
- Correcting Uneven Illumination (Uniformity Correction)
- Adjustments and Settings in the Menu
- Other Adjustments and Settings
- Maintenance
- Troubleshooting
- Others
Video image looks unnatural
Colors are unnatural
Check Action Refer to
Is the color space of the input signal
correctly set?
The color may turn out unnatural when the input signal is
different from the setting of this unit.
Set the “Color Space” for “Input Signal” correctly.
P. 34
Is the image correctly adjusted? Adjust “Color” and “Tint” accordingly. P. 34
Is the AV device or PC properly
connected?
Connect the AV device or PC properly. P. 15
* The video image may appear slightly reddish immediately after starting up. This is not a malfunction.
Video image is fuzzy
Check Action Refer to
Is the focus correctly adjusted? Adjust the focus. P. 19
Projected image is dark
Check Action Refer to
Is the lamp near exhaustion? Check the lamp time in the “Information” menu. Replace
with
a
new lamp unit as soon as possible when the lamp is
near exhaustion. To replace the lamp, consult your
authorized dealer.
P. 43
Is the lens aperture closed? Adjust the “Lens Aperture”. P. 28
Is “Lamp Power” set to “Low”? Set “Lamp Power” to “High” P. 32
Video images are missing
Check Action Refer to
Has screen mask been configured? Set “Mask” to “Off”. P. 35
48
Troubleshooting