Multimedia Printer Instructions Manual

30
DIFFERENT TYPES OF PRINTING (cont.)
ROTATING/REVERSING IMAGES
You can rotate an image 90& clockwise/counterclockwise or
180°, or you can reverse it to create a mirror image. If you
rotate a horizontal image 90&, it will be automatically
resized to fit the vertical layout.
Preparation
● See page 12.
● Press INPUT SELECT to select the appropriate input mode
depending on the connection to the source unit (Z page 18).
1
BEGIN SOURCE PLAYBACK
2
1
PRESS MEMORY WHEN THE
DESIRED IMAGE APPEARS
•If the image is unstable, press MEMORY
again.
2
PRESS OK
3
PRESS MENU
4
PRESS CURSOR TO SELECT
EFFECT, THEN PRESS OK
5
PRESS CURSOR TO SELECT THE
DESIRED ITEM ON EFFECT SET MENU
6
PRESS OK
•The image will be processed as selected.
•If R90° or L90° is selected, there will be a thin
blank portion at the right and left of the image.
•If you want to cancel and try again, press MENU.
7
PRESS OK
8
PRESS PRINT TO START PRINTING
•If IrDA (INFRARED) or PC MODE is selected, you do
not have to perform steps 1 and 2 . Refer to page 20 or
38 to send the image you want to print to the printer.
MENU 2 2/2
EFFECT
TITLE
FRAME
QUALITY :
.STD HIGH
PICTURE MEMORY
TO MENU 1
[ ]
ITEM
[
/
]
OK [OK]
SELECT
[
/
]
QUIT [MENU]
EFFECT SET MENU
ROTATION : R90&
:
L90&
:
180&
MIRROR
TRIMMING
ITEM
[
/
]
OK [OK]
QUIT [MENU]