For Customer Use: Enter below the Model No. and Serial No. which are located at the top of the unit. Retain this information for future reference. Model No. MC-R434U Thank you for purchasing the JVC MC-R434U DVD-RAM/R DRIVE. Before you start operating this unit, please read the instructions carefully in order to obtain the best possible performance. nted in Japan T0172-001A Serial No. This instruction book is made from 100% recycled paper. MC-R434U INST Cover 3 LST0172-001A 03.11.
INSTALLATION FLOW Follow the steps below for installation. INSTALLATION ●Install the MC-R434U in the CD/DVD Library. 䡵 Procedure for Opening the Door of the CD/DVD Library 䡵 Procedure for Opening the Drive Storage Cover of the CD/DVD Library 䡵 Procedure for Determining the Setup Position for the MC-R434U 䡵 Procedure for Installing the MC-R434U in the CD/DVD Library Page 3, 4 CONNECTION ●Connect the MC-R434U to the CD/DVD Library.
Procedure for Opening the Drive Storage Cover of the CD/DVD Library ●Install the MC-R433U in the CD/DVD Library. Before starting installation, be sure to turn both the host computer and peripherals off. For information related to the CD/DVD Library, refer to the instruction manual for the CD/DVD Library.
Procedure for Installing the MC-R434U in the CD/DVD Library CONNECTION ●Connect the MC-R434U to the CD/DVD Library. Also refer to the instruction manual for the CD/ DVD Library.
Connecting the cables SETUP of the CD/DVD Library. Always turn the power of the CD/DVD Library off when the dip switches are moved. For the details of the default factory settings, please refer to the section "SCSI ID No. SETTING" of the instructions from the CD/DVD Library. ENGLISH ● Set the SCSI ID of the MC-R434U and close the door Library 50p ID 0 ON Internal SCSI (SE) cable 4. ID 1 RSV ID 2 Procedure for Setting the DIP Switch ON 6p OFF 1 LVD power cable 3.
EXECUTION OF AUTOMATIC DRIVE DETECTION MODE. ● Execute the automatic drive detection mode of the Procedure for Connecting the CD/DVD Library to the Host Computer 䡵 Use an Ultra160-compatible cable as the external SCSI cable. CD/DVD Library. For the automatic drive detection mode, refer to the instruction manual for the CD/DVD Library. CAUTION 䡵 Be sure to close the drive storage cover and door of the CD/DVD Library before turning it on.
䡵 Interface Ultra 2 SCSI (80 Mbytes/s) 䡵 Data transmission rate Sustained (when the maximum sync transfer rate of the host adapter is set to 80 Mbytes/s) DVD-RAM 4.15 Mbytes/s (3X max.) (Single-sided 4.7 GB or double-sided 9.4 GB) DVD-RAM 䡵 Applicable discs DVD-R 4.7 GB (Ver. 2.0 for General Use) Recommended discs: Single-sided 4.7 GB Matsushita Electric Corp. Mitsubishi Kagaku Media Corp. Hitachi Maxell Ltd. TDK Corp. Taiyo Yuden Co., Ltd. 1.38 Mbytes/s (1X) (Single side 2.
DEUTSCH MC-R434U MC-R434U(G).pm6 1 BEDIENUNGSANLEITUNG 03.11.
INSTALLATIONSREIHENFOLGE Bitte führen Sie erforderlichen Installationsschritte in der angezeigten Reihenfolge durch. INSTALLATION ●Installieren Sie das MC-R434U in der CD/DVD-Bibliothek. 䡵 So öffnen Sie die Tür der CD/DVD-Bibliothek 䡵 So öffnen Sie die Einbaubuchtabdeckung der CD/DVD-Bibliothek 䡵 Bestimmen der Einbaubucht für das MC-R434U 䡵 So installieren Sie das MC-R434U in der CD/DVD-Bibliothek Seite 3, 4 ANSCHLÜSSE ●Schließen Sie das MC-R434U an die CD/DVD-Bibliothek an.
INSTALLATION So öffnen Sie die Einbaubuchtabdeckung der CD/DVD-Bibliothek ●Installieren Sie das MC-R434U in der CD/DVD- So öffnen Sie die Tür der CD/DVDBibliothek Laufwerkbucht Schraube Schraube DEUTSCH Bibliothek. Stellen Sie vor dem Einbau sicher, dass der Hostcomputer und alle Peripheriegeräte ausgeschaltet sind. Sonstige Angaben zum Einbau in die CD/DVDBibliothek entnehmen Sie bitte der zu der CD/DVDBibliothek gehörigen Bedienungsanleitung.
So installieren Sie das MC-R434U in der CD/DVD-Bibliothek ANSCHLÜSSE ● Schließen Sie das MC-R434U an die CD/DVDBibliothek an. Siehe auch die zur CD/DVD-Bibliothek gehörige Bedienungsanleitung. Sensorschlitz So schließen Sie die Kabel an die Rückseite von MC-R434U an MC-R434U Innenansicht Terminator Laufwerk 6 Internes SCSI (LVD)-Kabel Laufwerk 5 externer 68-pol.
EINRICHTEN ●Stellen Sie die SCSI-ID-Nr. für das MC-R434U ein 4. 50p ID 0 ON 6p ON LVDStromversorgungskabel 3. OFF 1 6p 2 3 4 (Grundeinstellung ab Werk) 68p 5. ID 1 RSV Internes SCSI (SE)-Kabel ID 2 So stellen Sie den DIP-Schalter ein < SE-LVD-Karte > DEUTSCH und schließen Sie die Tür der CD/DVD-Bibliothek. Sie müssen unbedingt die Stromversorgung der CD/ DVD-Bibliothek ausschalten, bevor Sie mit der Einstellung der DIP-Schalter beginnen.
DURCHFÜHREN DER AUTOMATISCHEN LAUFWERKERFASSUNG. So schließen Sie die CD/DVD-Bibliothek an den Hostcomputer an 䡵 Als externes SCSI-Kabel muss eine 160-kompatible Ausführung verwendet werden. ● Führen Sie die automatische Laufwerkerfassung für die CD/DVD-Bibliothek durch. Angaben zum automatischen Lauwerksserkennungsmodus finden Sie in der zur CD/DVDBibliothek gehörigen Bedienungsanleitung.
TECHNISCHE DATEN 䡵 Schnittstelle Ultra 2 SCSI (80 Mbytes/Sek.) (wenn der Hostadapter mit der maximalen SyncTransferrate von 20 Mbytes/Sek. arbeitet) DVD-RAM 4,15 Mbytes/Sek. (3X max.) (Einseitig 4,7 GB oder beidseitig 9,4 GB) DVD-RAM 1,38 Mbytes/Sek. (1X) (Einseitig 2,6 GB, nur lesen) DVD-R 5,44 Mbytes/Sek. (4X max.) (Schreiben) (Einseitig 4,7 GB oder beidseitig 9,4 GB) DVD-R 8,31 Mbytes/Sek. (6X max.) (Lesen) Empfohlene Disks: Beidseitig: 9,4 GB Mitsubishi Kagaku Media Corp.
MC-R434U(F).pm6 1 MANUEL D’INSTRUCTIONS 03.11.
INSTALLATION Procédez comme suit pour l’installation. INSTALLATION ●Installez le MC-R434U dans la bibliothèque CD/DVD. 䡵 Ouverture de la porte de la bibliothèque CD/DVD 䡵 Ouverture du panneau de magasin des unités de la bibliothèque CD/DVD 䡵 Détermination de l’emplacement du MC-R434U 䡵 Installation du MC-R434U dans la bibliothèque CD/DVD Page 3, 4 RACCORDEMENTS ●Raccordez le MC-R434U à la bibliothèque CD/DVD.
Ouverture du panneau de magasin des unités de la bibliothèque CD/DVD INSTALLATION ●Installez le MC-R434U dans la bibliothèque CD/DVD. Avant de commencer l’installation, mettez hors tension l’ordinateur hôte et tous les périphériques de la bibliothèque. Consultez le manuel d’instructions de la bibliothèque CD/DVD pour les instructions la concernant.
Installation du MC-R434U dans la bibliothèque CD/DVD RACCORDEMENTS ●Raccordez le MC-R434U à la bibliothèque CD/DVD. Consultez aussi le manuel d’instructions de la bibliothèque CD/DVD.
CONFIGURATION ●Réglez le n˚ ID SCSI du MC-R434U et refermez la porte de la bibliothèque CD/DVD. Vérifiez que l’alimentation de la bibliothèque CD/DVD est coupée au déplacement des microcommutateurs. Pour les détails sur le réglage de cet appareil à la sortie d’usine, voyez la section “DETERMINATION DES N° ID SCSI” du mode d’emploi de la bibliothèque CD/DVD. Bibliothèque 50p ON Câble d’alimentation LVD 3. OFF 1 6p 2 3 4 (Sortie d’usine) 68p 5.
EXECUTION DU MODE DE DETECTION AUTOMATIQUE DE LECTEUR ●Exécutez le mode de détection automatique de lecteur de la bibliothèque CD/DVD. Consultez le manuel d’instructions de la bibliothèque CD/ DVD pour le mode de détection automatique de lecteur. Raccordement de la bibliothèque CD/ DVD à l’ordinateur hôte 䡵 Utilisez un câble compatible Ultra 160 comme câble SCSI externe. ATTENTION 䡵 Refermez bien le panneau du magasin des unités et la porte de la bibliothèque CD/DVD avant la mise sous tension.
SPECIFICATIONS 䡵 Interface Ultra 2 SCSI (80 Mo/sec.) 䡵 Vitesse de transfert Soutenu (quand la vitesse de transfert synchro maximum de l’adaptateur maître est réglée à 80 Mo/sec.) DVD-RAM 4,15 Mo/sec. (3X max.) (4,7 Go une face ou 9,4 Go deux faces) DVD-RAM 䡵 Disques applicables DVD-R 4.7 GB (Ver. 2.0 à usage général) Disques recommandés: Une face 4,7 Go Matsushita Electric Corp. Mitsubishi Kagaku Media Corp. Hitachi Maxell Ltd. TDK Corp. Taiyo Yuden Co., Ltd. 1,38 Mo/sec.
DVD-RAM/R驱动器 MC-R434U ===== 使用说明书 MC-R434U(中).pm6 1 32.1.
! !"#$%&'( ● j`JoQPQr `aLasa 䡵 䡵 䡵 䡵 !"#$% !"#$%&'( j`JoQPQr !" j`JoQPQr ! == P ● j`JoQPQr `aLasa 䡵 j`JoQPQr !" !"#$% == Q ● j`JoQPQr p`pf 䡵 䡵 䡵 !"#$%& !"#$%&'( !"#$% ! !"#$%&'( == R ! "# ● !"#!$%&'()*+,-./0 䡵 !"#$ %& '()*+ 䡵 !"#$%&'() == S !"#$% ● !" gs` `aLasa !j`JUNMMirLUOMMirL USMMir asaJo^jLo ! ●= !"#$%&'()*+,-.
!"#$%&'( ● j`JoQPQr `aLasa ! !"#$%&'()*+,-./ 01234 `aLasa !"#$%& !'(" 驱动器仓 螺钉 螺钉 驱动器仓门 !"#$% j`JUNMMir 驱动器固定螺孔 驱动器仓 驱动器仓门 驱动器仓 螺钉 ===== j`JUNMMir G !"#$ j`JUOMMir !"#$%&'()* +, 1. 2. !"#$%&'()* !"#$% 驱动器仓 j`JoQPQr 驱动器固定螺孔 !" 驱动器 No. 6 驱动器 No. 5 驱动器 No. 4 驱动器 No. 4 驱动器 No. 3 驱动器 No. 3 驱动器 No. 2 驱动器 No. 2 驱动器 No. 1 驱动器 No. 1 j`JUNMMir !"# j`JUOMMir j`JUOMMir 1.
j`JoQPQr ● j`JoQPQr `aLasa 传感器口 !" `aLasa !"#$%& !"#$%&' j`JoQPQr !" MC-R434U j`JoQPQr !"# MC-R434U j`JoQPQr !"# 驱动器固定螺钉 3 j`JoQPQr !"# 1 W 控制电缆 14p N 双列直插式开关 1. !"#$% j`JoQPQr ! 䡵 !"#$%&'() 䡵 j`JoQPQr !"# 䡵 j`JoQPQr !"#$%&'()*+,-. 2. ! j`JoQPQr !"#$ 3. !"#$%&'()*+&'#$%",*-./ 䡵 !"#$% 䡵 !"#$%&'()*+,- ! 2 4p 电源电缆 3 SCSI电缆 j`JoQPQr !"#$%&'( 1.
● j`JoQPQr p`pf ! !"#$% !"#$%&'( )*+ `aLasa ! !"#$%&'()*+ !",-./01 p`pf !"#$ 4. ID 0 ID 1 ID 2 !"#$%& RSV ON 50p ON 6p 3. OFF 1 2 3 4 6p 68p 2. • j`JoQPQr ! isa Sm pbJisa !"#$% !"#$% ! 1. 3. ! p`pf pb RMm pbJisa ! • p`pf pb !"#$%&'( p`pf ===== 5. !"#$%&'()* faO faN faM !"# p`pf ! 䡵= !"#$%&'()*+,p`pf !"#$ !"#$% 䡵=j`JoQPQr ! p`pf M ∼ T ! U ∼ NR !"#$ 䡵=opsW= 4.
! "# ● !"#!$%&'( !"#!$%&'()*+,-./`aLasa !"#$%&' 䡵 p`pf !"#$%&'( !" räíê~NSM !"# 䡵 !"#$%&'()*+,-./0 !" 䡵 ! !"#$%&'( !")!*+, !"#$%&' 䡵 ! !"#$%& p`pf !"#$% !"#$%&'() !"#$ %& '()* 1. 2. 3. !"#$ %&'()*+,-. /aofsb=afpmi^v 䡵= `aLasa !"#$%&'%& asaJo^j !" rkhkltk ! !"#$%& !"#$%&'()*+,-.
䡵 räíê~=O=p`pf=E=UM=jÄóíÉëLë=F 䡵 ! asaJo==QKT=d_ sÉêK=OKM ! !"#$ QKT=d_ j~íëìëÜáí~=bäÉÅíêáÅ=`çêéK jfqpr_fpef=h^d^hr=jbaf^=`lKI=iíÇK eáí~ÅÜá=j~ñÉää=iíÇK qah=`çêéK q~áóç=vìÇÉå=`çKI=iíÇK 䡵 !" !"#$%&'()*+,- UM=jÄóíÉëLë asaJo^j QKNR=jÄóíÉëLë P QKT=d_ VKQ=d_ asaJo^j OKS=d_ asaJo O RKQQ=jÄóíÉëLë Q ! QKT=d_ VKQ=d_ UKPN=jÄóíÉëLë S ! asaJo NKPU=jÄóíÉëLë !" QKT=d_ VKQ=d_ asaJolj NS=jÄóíÉëLë ! NKR=jÄóíÉëLë=∼=QKU=jÄóíÉëLë
MC-R434U DVD-RAM/R DRIVE M VICTOR COMPANY OF JAPAN, LIMITED Tha Befo care is a registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD. is a registered Trademark in JAPAN, the U.S.A., the U.K. and many other countries. Printed in Japan LST0172-001A © 2003 VICTOR COMPANY OF JAPAN, LIMITED MC-R434U INST Cover 2 03.11.