Owner manual
40 EN
TROUBLESHOOTING
Meaning of Messages Displayed on the LCD panel
Message
Please
wait...
Connect
video in
No video
signal
Memorise
image
Charge
battery
Insert ink
cassette
Close
cass. door
Change ink
cassette
Insert
paper
Close
paper door
Paper
jammed
Remove
paper
Print is
impossible
● Appears when:
䡲 Action:
●Image data is being stored or printing has started.
●The video source and the printer are not connected or the cable
has been disconnected.
䡲Connect the video cable according to the instructions on page
14.
●An attempt is made to store an image from a video source that
has been turned off.
䡲Turn on the video source.
●An attempt is made to print before an image has been stored.
䡲Store image data before printing.
●The battery is depleted.
䡲Load a charged battery (BN-V607).
●An ink cassette has not been loaded or not been properly
loaded.
䡲Load ink cassette and close the lid.
●The ink cassette compartment lid is open.
䡲Close ink cassette compartment lid.
●The ink cassette is depleted.
䡲Load new ink cassette.
●No printing paper is loaded.
䡲Load printing paper properly and close the paper compartment
door.
●The paper compartment door is open.
䡲Load printing paper properly and close the paper compartment
door.
●A paper jam occurs during printing.
䡲Clear paper jam according to instructions on page 42.
●A paper jam occurs during printing.
䡲Clear paper jam according to instructions on page 42.
●Printing is attempted at low temperature (0°C or colder).
●Abnormal image data has been stored.
䡲Use the printer under specified conditions.
page
–
14
–
–
16–17
18
18
18
20
20
42
42
43