NX-DV3[UJ]-01.
NX-DV3[UJ]-02.fm Page 1 Tuesday, December 28, 2004 11:26 AM Warnings, Cautions and Others Introduction CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION — F button! Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). The F button in any position does not disconnect the mains line. • When the system is on standby, the STANDBY/ON lamp lights red.
NX-DV3[UJ]-02.fm Page 2 Tuesday, December 28, 2004 11:26 AM CAUTION — Proper Ventilation To avoid risk of electric shock and fire and to protect from damage, locate the apparatus as follows: Top/Front/Back/Sides: No obstructions should be placed in the areas shown by the dimensions below. Bottom: Place on the level surface. Maintain adequate air path for ventilation by placing on a stand with a height of 10 cm or more. In addition, maintain the best possible air circulation.
NX-DV3[UJ].book 1 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Table of Contents marks refer to operation used frequently. You can quickly learn the general usage of this product by reading those parts only. Introduction Listening to Radio Broadcasts Notes on Operation ............................. 3 Suitable Locations for the Main Unit ................. Condensation.................................................... Cleaning the Main Unit ..................................... Listener’s Etiquette .................
NX-DV3[UJ].book 2 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Playing Back MP3/WMA and JPEG Discs ..................................................37 Playback ........................................................... 37 Repeat Playback............................................... 38 Setting and Adjusting Surround Mode ..39 Selecting the Surround Mode ........................... 39 Adjust the Volume for Each Speaker................ 40 Other Settings...................................................
NX-DV3[UJ].
NX-DV3[UJ].book 4 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Playable Disc Types This product has been designed to play back the following discs: DVD VIDEO, DVD AUDIO, VCD, SVCD, CD This product can also play back the following discs: • Finalized DVD-R/RW discs recorded in the DVD VIDEO format.
NX-DV3[UJ].book 5 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction (Continued) Notes on Operation About MP3/WMA/JPEG discs Playable MP3/WMA/JPEG discs and files • Discs recorded in the ISO 9660 format are playable (except discs recorded in the "packet write" format (UDF format)). • Discs recorded in the multi-session format are also playable. • Files with an extension of ".mp3", ".wma", ".jpg" or ".jpeg" (extensions with uppercase and lowercase letters mixed are also acceptable) are playable.
NX-DV3[UJ].book 6 ページ ２００４年１２月２８日 火曜日 午後２時３７分 About the Color System Regarding TV mode This product is suitable for NTSC. The discs using TV mode other than NTSC (such as PAL) is converted into NTSC mode before playback. NOTE • Some discs may not be played properly, for example, the picture movement may not be smooth, or the aspect ratio (ratio of length and width) may be changed.
NX-DV3[UJ].book 7 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Special Cautions Introduction When you are away When away on travel or for other reasons for an extended period of time, disconnect the power cord plug from the wall outlet. Notes on Handling ■Important cautions Installation of the system • Select a place which is level, dry and neither too hot nor too cold; between 5°C and 35°C. • Leave sufficient distance between the system and the TV. • Do not use the system in a place subject to vibration.
NX-DV3[UJ].book 8 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Setting Up the Unit This products allows you to enjoy virtual surround sound using only the four speakers in the front, as it is equipped with the 4-speaker front surround function (See Pattern 1 in the diagram below). In addition to 4-speaker front surround, Pattern 2 and Pattern 3 are available. ■Pattern 1 Left speaker (SP-NXDV3F) About Front Surround Function JVC logo is placed outside.
NX-DV3[UJ].book 9 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction (Continued) Setting Up the Unit ■Pattern 2 Left speaker (SP-NXDV3F) Surround speaker (SP-NX DV3S) ■Pattern 3 JVC logo is placed Right speaker outside. (SP-NXDV3F) Center unit (CA-NXDV3) Left speaker (SP-NXDV3F) Center unit (CA-NXDV3) Surround speaker (SP-NX DV3S) TV stand (not supplied) JVC logo is placed Right speaker (SP-NXDV3F) outside.
NX-DV3[UJ].book 10 ページ ２００４年１２月２８日 火曜日 午後２時３７分 NOTE • When placing the surround speaker on a stand, such as a speaker stand, attach the foot seals to the surround speakers, depending on the way the speakers are placed ( page 9). • When mounting the surround speakers on the wall, pay attention to the following: • Obtain screws that are strong enough to mount the speakers to the wall.
NX-DV3[UJ]-03.fm 11 ページ ２００５年１月２４日 月曜日 Part Description 午前１０時４３分 Introduction Introcution/Preparation 20, 22 The numbers refer to the pages in which the parts are explained.
NX-DV3[UJ]-03.fm 12 ページ ２００５年１月２４日 Remote Control 月曜日 午前１０時２７分 Preparation The numbers refer to the pages in which the parts are explained.
NX-DV3[UJ].book 13 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction (Continued) Remote Control This page is for when operating your TV using the remote control of this product. Operating the TV Using the Remote Control 4 Press number buttons (1-9, 0). Examples: For a Hitachi TV: Press 1, then 0. For a Toshiba TV: Press 0, then 8. If there are two or more manufacturer's codes, try them in turn and select the one that causes the product to work properly.
NX-DV3[UJ].book 14 ページ ２００４年１２月２８日 Connections 火曜日 午後２時３７分 Connect all necessary parts before connecting the power plug. Connecting the Antennas Connecting the FM antenna Connecting the AM antenna 1 Set up the AM antenna (supplied). Main unit (rear view) FM antenna (supplied) Insert the tab into the slot. Stretch out the FM antenna to the best position for radio reception, and then fix it with adhesive tape. 2 Connect the antenna cord.
NX-DV3[UJ].book 15 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction (Continued) Connections Connect all necessary parts before connecting the power plug. Connecting the Speakers After connecting the speakers, gently pull on the speaker cords to make sure the cords are firmly connected and do not pull out. Main unit (rear view) CAUTION • Do not short-circuit the and speaker terminals. Doing so may damage the speakers. • Do not connect other speakers together with the supplied speakers.
NX-DV3[UJ].book 16 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Connecting Other Equipment Connecting with digital equipment Read this section when connecting other audio equipment to this product.
NX-DV3[UJ].book 17 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction (Continued) Connections Connect all necessary parts before connecting the power plug. Connecting with a TV TV VIDEO IN Supplied video cord Connecting by using the component video cord Main unit (rear view) You can enjoy better quality pictures than when using the S-video cord. TV CAUTION • Connect the main unit directly with a TV (or a monitor) without routing through a VCR. Otherwise it may cause picture distortion while playing back.
NX-DV3[UJ].book 18 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Connecting the Sub-woofer Equipment Connecting the Power Cord Main unit (rear view) Main unit (rear view) Amplifier-built-in sub-woofer Power cord To an audio input terminal Audio cord (not supplied) (If an audio cord comes with the amplifierbuilt-in sub-woofer, you can use the cord.) NOTE • When you connect a sub-woofer to the system, set page "SUB WFR" to "ON" in "Other Settings" ( 40).
NX-DV3[UJ].book 19 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction Basic Operations Basic Operations This manual explains the operations assuming that you will use the remote control. Some buttons on the main unit are the same as those on the remote control. You can use either button in this case. 2 Set the hour. or Back Next Back Next • Holding down the button causes the hour to increment. • You can use the number buttons to specify the hour. Refer to "Using the number buttons" shown below.
NX-DV3[UJ].book 20 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Turning On/Off the Main Unit Press (or on the main unit). • With the power off, pressing either button also turns on the main unit. The function assigned to the button starts working at the same time. Using Clear Voice Function Clear Voice function allows you to easily understand the dialog of DVD videos even with the volume turned down. Press . • Each time you press , Clear Voice function toggles between "ON" and "OFF".
NX-DV3[UJ].book 21 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction (Continued) Basic Operations For the locations of remote control buttons, refer to page 19. Changing the Brightness of the Display Window (DIMMER) Press . • Each time you press gles as follows. , the display tog- : The display window becomes dark. : Cancels the brightness adjustment (initial setting).
NX-DV3[UJ].book 22 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Listening to Radio Broadcasts Basic Operations/Listening to Radio Broadcasts This product can receive FM and AM radio broadcasts. ■When the main unit is turned off To select 10 kHz spacing, while holding down on the main unit, press on the main unit to turn on the power. "AM 10 kHz" appears in the display window. To select 9 kHz spacing, while holding down on the main unit, press on the main unit to turn on the power.
NX-DV3[UJ].book 23 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction (Continued) Listening to Radio Broadcasts Storing Radio Stations (Preset) You can store up to 30 FM radio stations and up to 15 AM radio stations. ■While the broadcast from the radio station you want to preset is being received 1 Set the remote control mode selector to AUDIO. For the locations of remote control buttons, refer to page 22. Changing the Display in the Display Window Press . • Each time you press gles as follows.
NX-DV3[UJ].book 24 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Basic Operations of the DVD Player Listening to Radio Broadcasts/Listening to Discs How to read this manual • Operations are described by mainly using the remote control buttons. If there are the same marks on the main unit, the buttons on the main unit can also be used. • The following marks tell you for which type of the discs the operation can be made. • The illustrations and TV screens may be different between the actual case and the description.
NX-DV3[UJ].book 25 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction (Continued) Basic Operations of the DVD Player ■Display for CD Display while a CD is being played back: ■Display for VCD/SVCD Display while a VCD/SVCD is being played back: Display while the CD is stopped: • PBC indicator is displayed while PBC is activated. Display while the VCD/SVCD is stopped: ■Display for DVD AUDIO Display while a DVD AUDIO is being played back: *1 "PBC" will appear when the disc is PBCcompatible.
NX-DV3[UJ]-03.fm 26 ページ ２００５年１月２４日 月曜日 午前１０時２２分 Listening to Discs For the locations of remote control buttons, refer to page 24. Messages displayed on the TV screen While a DVD is selected as the sound source, the messages shown below are displayed, depending on the status. NOW READING The main unit is reading the disc. Wait for a while. REGION CODE ERROR! The disc cannot be played back because its region code is not compatible. ( page 4) NO DISC No disc is loaded. OPEN The disc tray is opening.
NX-DV3[UJ].book 27 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction (Continued) Basic Operations of the DVD Player Stopping Playback ■While a disc is being played back Press . Resuming Playback (RESUME) Pausing Playback ■While a disc is being played back Press . To resume normal playback, press . • Playback cannot be paused by pressing When playback is stopped in the middle, playback can be started from the stopped scene.
NX-DV3[UJ].book 28 ページ ２００４年１２月２８日 火曜日 午後２時３７分 For the locations of remote control buttons, refer to page 24. Slow Motion Playback (only for moving image) ■While a disc is paused Press or 1 Set the remote control mode selector to AUDIO. 2 Press the number buttons ( or ) to select the track/chapter you want to listen to. . • Each time you press , the speed increases as shown below. 1/ 32 1/ 16 1/ 8 1/ 4 1/ • Refer to "Using the number buttons" ( page 19).
NX-DV3[UJ].book 29 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction Convenient Functions of the DVD Player Listening to Discs AUDIO • Each time you press , the audio will be changed. The audio can also be changed by pressing . 2 Wait for a few seconds or press . NOTE • You can also operate this function by using the menu bar ( page 35). • For a language code such as "AA", refer to "Language Codes" ( page 43).
NX-DV3[UJ].book 30 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Selecting a View Angle Adjusting the Picture Quality (VFP) (only for moving image) ■While a disc containing two or more view angles is being played back 1 Press . ■While a disc is played back or paused 1 Press . Example: TV screen Example: TV screen Current VFP mode Selected view angle/ Total number of view angles 0 0 0 Selected view angle 0 0 • Each time you press , the angle will be changed. The angle can also be changed by pressing .
NX-DV3[UJ].book 31 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction (Continued) Convenient Functions of the DVD Player Example: 5 Press value. 6 Press 7 Press Playing Back the Bonus Group to change the There are some DVD AUDIO discs with a special group, called "bonus group", recorded. . • To adjust other items, go back to step 3. . NOTE • If no operation is made for several seconds during the procedure, the settings made so far will be automatically stored.
NX-DV3[UJ].book 32 ページ ２００４年１２月２８日 火曜日 午後２時３７分 For the locations of remote control buttons, refer to page 29. Browsable Still Pictures (B.S.P.) There are some DVD AUDIO discs with still pictures recorded. Among the still pictures, there are pictures called B.S.P. (browsable still pictures). You can change these pictures as if turning over pages. • This operation can be carried out when "B.S.P." is lit in the display window on the main unit. ■While a disc is being played back 1 Press .
NX-DV3[UJ].book 33 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction (Continued) Convenient Functions of the DVD Player 3 Press the number buttons ( or ) to program chapters/tracks. ■Display for DVD VIDEO • Select a title number, and then select a chapter number. Confirming programmed content While playback is stopped, press or repeatedly. • During this operation, you can add a track as the last in the program ( step 3), or erase the last track. To erase the last track, press .
NX-DV3[UJ].book 34 ページ ２００４年１２月２８日 火曜日 午後２時３７分 For the locations of remote control buttons, refer to page 29. Random Playback Repeat Playback You can listen to tracks or chapters in random order. Refer to page 38 for repeat playback of MP3/WMA and JPEG files. ■ While playback is stopped ■While a disc is being played back 1 Press repeatedly to select "RANDOM". Example: For CD Press . • Each time you press will be changed.
NX-DV3[UJ].book 35 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction Status Bar and Menu Bar Function list Press to select, and press determine unless otherwise noted. to Changes time information displayed in the display window on the main unit and Time display selection the status bar. Each time is pressed, the display will be changed. DVD VIDEO/DVD AUDIO TOTAL : Elapsed playing time of current title/ group T.
NX-DV3[UJ].book 36 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Playing Back the Designated Part Repeatedly (A-B Repeat Playback) ■While a disc is being played back ■While a disc is being played back 1 Press 3 4 Press Press 5 . 2 Press twice. • The menu bar appears ( . to select . Press at the starting point of the part to be repeated (designating A point). • The icon on the menu bar will be 6 Set the remote control mode selector to AUDIO. page 35) appears. to select Press OFF A B 1 twice.
NX-DV3[UJ].book 37 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction Playing Back MP3/WMA and JPEG Discs Playback Display of an MP3/WMA disc is described here as an example. For a JPEG disc, read "track" as "file". NOTE • When playing back a disc containing both MP3/ WMA and JPEG files, set one of them to be played ( page 41). 1 Insert a disc. Example: TV screen This indicator lights up during repeat playback This indicator lights up ( page 38). during program playback Elapsed playing time of ( page 32).
NX-DV3[UJ].book 38 ページ 4 Press 5 Press ２００４年１２月２８日 火曜日 午後２時３７分 to select a track. or Repeat Playback . Example: Display during playback ■While a disc is being played back or stopped Press . • Each time you press changed. • At first, a track title (file name) is scrolled. • When an MP3 or WMA is loaded, tag information (title/artist/album) is scrolled followed by a track title. • Only alphanumerical one-byte characters are displayed properly as a track title or tag information.
NX-DV3[UJ].book 39 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Setting and Adjusting Surround Mode Introduction Selecting the Surround Mode 1 Press repeatedly to select the surround mode. Each time you press , the display toggles as follows. ■When the speaker position is "F1" or "F2" ( page 8-10) Normally this mode should be turned on. Select this mode when watching movies or using sound sources recorded with multi-sounds. This mode produces broader sound compared with the multi-channel mode.
NX-DV3[UJ].book 40 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Adjust the Volume for Each Speaker 1 2 Press and to select "SURR" (Surround Speaker) or "SUBWFR" (Sub-woofer). Select or to adjust the volume. Other Settings 1 2 Press . Select a setting item by pressing or . Adjust the volume balance of the front speakers. Adjust the volume between -6 to +6. • It will return to sound source display in a few seconds. Set whether a sub-woofer is to be used. NOTE Set the decode mode for Digital 2 Terminal.
NX-DV3[UJ].book 41 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction Preferences LANGUAGE NOTE • If the selected language is not recorded on the disc, the optimum language set for the disc appears. • For a language code such as "AA", refer to the "Language Codes" ( page 43). Items Contents MENU LANGUAGE Select the language for the DVD VIDEO menu. AUDIO LANGUAGE Select the audio language for the DVD VIDEO. SUBTITLE ON SCREEN LANGUAGE Select the subtitle language for the DVD VIDEO.
NX-DV3[UJ].book 42 ページ ２００４年１２月２８日 火曜日 午後２時３７分 SPK. SETTING *1 AUDIO Items DIGITAL AUDIO OUTPUT Contents ( : initial setting) Items Select an output signal type from the following in accordance with the equipment connected to the digital audio output terminal (AV amplifier, etc.). (See the list below for the preference items and output signal.) LEVEL SURROUND RIGHT SPEAKER, SURROUND LEFT SPEAKER, SUBWOOFER (Displayed when "SUB WFR" is page 40).
NX-DV3[UJ].book 43 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction Language Codes (Continued) Preferences OTHERS Items Contents ( : initial setting) RESUME ( page 27) ON SCREEN GUIDE Select whether you display guide icons on the on-screen guide indicating status of a disc/ main unit. (For details on the guide icons, refer to page 26.) AV COMPU LINK MODE When you want to control JVC TV by using this product, select a mode that matches the terminal from the following.
NX-DV3[UJ].
NX-DV3[UJ]-04.fm 45 ページ ２００５年１月２４日 月曜日 午前１０時２１分 Introduction Listening to MDs Listening to Other Equipment/Listening to MDs Listening to MDs ■When the main unit is turned on 1 Insert an MD. CAUTION • Do not insert an MD while the main unit is turned off. Forcibly inserting an MD may damage the main unit. 2 Press . • When the MD is loaded, DISC IN lamp on the main unit lights red.
NX-DV3[UJ].book 46 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Listening to MDs Changing the Display in the Display Window Press Skipping to the Beginning of a Track ■While an MD is being played back . • Each time you press gles as follows. , the display tog- Press Display while an MD is being played back ( page 45) When no title has been set to a track, "TR. NO TITLE" appears. When the track being played back does not belong to a group, no group title display appears.
NX-DV3[UJ]-04.fm 47 ページ ２００４年１２月２８日 火曜日 午後４時１６分 Introduction (Continued) Listening to MDs Group Playback of an MD 3 Press the number buttons ( or ) to select the track numbers. You can play back just the tracks from a group which you want to listen to. • Refer to "Using the number buttons" ( page 19). ■While an MD is stopped 1 Press repeatedly to select "GROUP". NOTE 2 Press • When you want to erase the program, press while playback is stopped.
NX-DV3[UJ]-04.fm 48 ページ ２００４年１２月２８日 火曜日 午後４時１６分 Listening to MDs For the locations of remote control buttons, refer to page 45. • Each time you press toggles as follows. Random Playback This function allows you to listen to tracks in random order. : For repeating all tracks in an MD. For repeating all tracks in the selected group when MD group playback is selected. ■While an MD is stopped 1 , the display Press repeatedly to select "RANDOM". : For repeating one track. 2 Press .
NX-DV3[UJ]-04.fm 49 ページ ２００４年１２月２８日 火曜日 午後４時１６分 Introduction (Continued) Listening to MDs For the locations of remote control buttons, refer to page 45. 4 Enter the title you want to search. 5 Press • Enter the first one to five characters of the title. Example: Entering "F" searches titles starting with "F" in order of track number. Entering "Frien" searches titles starting with "Frien" in order of track number. • For entering titles, refer to "Entering Titles" ( page 56).
NX-DV3[UJ].book 50 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Listening to Other Equipment Listening to MDs/Listening to Other Equipment 2 Start other equipment playback. 3 Adjust the volume and make other necessary settings. • Refer to the operation manual for the connected equipment. • For adjusting the volume and making other necessary settings, refer to "Basic Operations" ( page 19). Changing the Display in the Display Window Press . • Each time you press gles as follows.
NX-DV3[UJ].book 51 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction Recording Sound to MDs Recording Sound CAUTION • Do not bump or sway the main unit during MD recording. Be especially careful while "WRITING" is displayed. Such movement may interfere with MD playback. • You cannot play back tracks recorded in LP2 or LP4 with audio equipment that is not compatible with MDLP. When you attempt playback, "LP: " appears in front of the track title, and the main unit does not produce any sound.
NX-DV3[UJ]-04.fm 52 ページ ２００５年１月２４日 月曜日 午前１０時２１分 • Each time you press as follows. Recording All Tracks from a Disc to an MD 1 Press , and then press : ×5 high speed recording (only for CDs) . : Normal speed recording • The DVD is selected as the sound source and playback is stopped. • Select normal speed when you want to play back a disc other than a CD.
NX-DV3[UJ].book 53 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction (Continued) Recording Sound to MDs Recording Only One Track from a Disc Changing the Display in the Display Window during Recording (Excluding DVD VIDEOs) Before proceeding to step 6, start playback of the track you want to record. Press • Pressing in step 6 returns playback to the beginning of the track, and only that track is recorded. • This one-track recording is not available for DVD VIDEOs. .
NX-DV3[UJ]-04.fm 54 ページ ２００４年１２月２８日 火曜日 午後４時１９分 For the locations of remote control buttons, refer to page 51. 1 Select a sound source. Sound source Radio broadcast Sound from other equipment (AUX/ AUX-DIGITAL 1/2) 2 3 4 Operation Select the radio station whose broadcast you want to record ( page 22). Press repeatedly to select AUX or AUX-DIGITAL 1/2, and prepare playback on the other equipment ( page 50). Insert an MD for recording.
NX-DV3[UJ].book 55 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction Giving (Editing) Titles Recording Sound/Editing MDs For editing an MD (disc) title or track titles Things You Should Know about Editing • Press mode. • You cannot edit an MD while its write protect knob is open ( page 72). When you attempt to edit a protected MD, "DISC PROTECTED" appears. • When you finish editing, "EDITING" appears, then "WRITING" flashes and the edited setting is recorded to the MD.
NX-DV3[UJ].book 56 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Editing MDs 6 Press (right) on the main unit to eject the MD. NOTE • Number of characters that can be entered to an MD You can enter up to 1792 characters to each MD, with up to 61 characters to each track. However, the actual number of characters that you can enter is less than the number indicated here because of restrictions of the MD writing method. Spaces are counted as characters.
NX-DV3[UJ].book 57 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction Editing Tracks Editing MDs Dividing a Track into Two Tracks (DIVIDE) Example: Dividing a tune into tune A and tune B Track number 4 Press 5 Press . 6 Press . or . • You can adjust the dividing point within the range of -128 to +128 position (approximately -8 to +8 seconds in SP mode).
NX-DV3[UJ].book 58 ページ ２００４年１２月２８日 火曜日 午後２時３７分 For the locations of remote control buttons, refer to page 55. Joining Tracks (JOIN) You can join two adjacent tracks into one track. Moving a Track (MOVE) Example: Moving tune B Example: Joining tune A and tune B ■While the second track (track 2 in the example shown above) to which you want to join the first track is being played back 1 2 Press "JOIN?".
NX-DV3[UJ].book 59 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction (Continued) Editing Tracks For the locations of remote control buttons, refer to page 55. Erasing a Track (ERASE) Erasing All Tracks (ALL ERASE) Example: Erasing tune B All tracks are erased. CAUTION CAUTION • Once you erase a track, you cannot retrieve it. Before erasing a track, confirm that you no longer need it. • Once you erase a track, you cannot retrieve it. Before erasing a track, confirm that you no longer need it.
NX-DV3[UJ].book 60 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Editing Tracks by Group You can sort tracks into 99 groups maximum. Forming a Group (FORM GROUP) 3 4 You can group tracks together. A sequence of tracks that is not registered in any group can be grouped. Press . Press or to select the track number which you want to specify as the last in the group. (Track number 3 is selected in the example shown on the left.
NX-DV3[UJ].book 61 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction (Continued) Editing Tracks by Group Adding a Track to a Group (ENTRY GROUP) You can add a track to the specified group as the last track of the group. Dividing a Group into Two Groups (DIVIDE GR.
NX-DV3[UJ].book 62 ページ ２００４年１２月２８日 火曜日 午後２時３７分 For the locations of remote control buttons, refer to page 55. Joining Groups (JOIN GROUP) You can join two adjacent groups. Moving a Group (MOVE GROUP) Example: Moving group 2 Example: Joining group 1 and group 2 Group 1 Group 1 Group 2 Group 2 Group 1 Group 1 ■While the track in the second group to which you want to join the first group (group 2 in the example shown above) is being played back 1 Press repeatedly to select "JOIN GROUP?".
NX-DV3[UJ].book 63 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction (Continued) Editing Tracks by Group Canceling a Group (UNGROUP/UNGROUP ALL) Canceling a specified group (UNGROUP) Example: Canceling group 1 Group 1 Example: Canceling all groups Group 2 Group 1 ■While a track in the group you want to cancel (group 1 in the example shown above) is being played back 1 Press repeatedly to select "UNGROUP?". 2 Press • You can also select a group number with or . Press . Press .
NX-DV3[UJ].book 64 ページ ２００４年１２月２８日 火曜日 午後２時３７分 For the locations of remote control buttons, refer to page 55. Erasing a Group (ERASE GROUP) You can erase a group including all tracks in the group. Example: Erasing group 2 Group 1 Group 2 Group 1 CAUTION • Once you erase a track, you cannot retrieve it. Before erasing a track, confirm that you no longer need it.
NX-DV3[UJ]-05.fm 65 ページ ２００４年１２月２８日 Using the Timers 火曜日 午後４時１３分 Introduction Editing MDs/Convenient Functions Set the clock beforehand ( page 19). Example: Display while the sleep timer is set to 60 minutes NOTE • When you set the sleep timer, the display window automatically dims. • Before the clock has been set (While "0:00" is flashing), when you press , "CLOCK ADJUST!" appears ( page 19). Changing the sleep timer setting • Press repeatedly to select the time again.
NX-DV3[UJ]-05.fm 66 ページ ２００４年１２月２８日 火曜日 午後４時１３分 Convenient Functions ■When you want to record an FM/AM radio broadcast Recording Timer • Press , and then press , or the number buttons to select the preset number of the radio station whose broadcast you want to record. Refer to "Using the number buttons" ( page 19). You can use the recording timer function to record FM/AM broadcasts or sound from other equipment to an MD. This operates only once after it has been set.
NX-DV3[UJ]-05.fm 67 ページ ２００４年１２月２８日 火曜日 午後４時１３分 Introduction (Continued) Using the Timers Convenient Functions DAILY Timer (Alarm Timer) Canceling the recording timer Press once to display "REC TIMER" and then press . In the display window, and "REC" will have disappeared. When REC Timer is finished, these displays will also disappear. Activating the recording timer again The settings for REC Timer are recorded in the memory. Press This operates at the same time every day, like an alarm clock.
NX-DV3[UJ]-05.fm 68 ページ ２００４年１２月２８日 火曜日 午後４時１３分 For the locations of remote control buttons, refer to page 65. 4 Press or to select the sound source you want to play back. Example: When you want to listen to an FM broadcast • When you want to listen to sound from other equipment, you cannot use the playback timer function to start playback on any equipment other than this product.
NX-DV3[UJ]-05.fm 69 ページ ２００４年１２月２８日 火曜日 午後４時１３分 Introduction Auto Standby Disc/MD Ejection Lock Number buttons If no sound is produced for 3 minutes when a sound source other than the FM/AM radio is selected, the main unit automatically turns off. ■When a sound source other than the FM/ AM radio is selected You can prohibit ejection of a disc and MD. Press ■When the main unit is turned off . While holding down the main unit.
NX-DV3[UJ].book 70 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Using AV COMPU LINK The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest operation. If your JVC TV set supports the JVC AV COMPU LINK system, simply starting the main unit will automatically make all necessary settings on the TV to allow you to enjoy the playback. Connection and Setting • Carefully read manuals of equipment to be connected.
NX-DV3[UJ].book 71 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction Restrictions on MDs Convenient Functions/Reference Because the MD recording method has some restrictions, the following phenomena may occur. The phenomena are not a malfunction of this product. Phenomenon Possible cause "DISC FULL" appears even though recordable time as printed on the MD remains. Regardless of remaining recordable time, MDs have a limit on the number of recordable tracks. You cannot record 255 or more tracks to an MD.
NX-DV3[UJ].book 72 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Handling Discs/MDs Reference Handling discs Cleaning the main unit cabinet • Do not put adhesive tape or stickers, or write on a disc. • Do not bend a disc. • Be sure not to use heart/flower shaped discs or other irregularly shaped discs. The use of such discs damages the main unit. Cleaning discs Signal surface Wipe a disc from the center outward with a soft cloth. • Gently dust the cabinet surface with a soft dry cloth.
NX-DV3[UJ].book 73 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction MD/Disc Messages Reference MD message CANNOT ENTRY! CANNOT FORM! CANNOT GROUP! CANNOT JOIN CANNOT LISTEN CANNOT REC CANNOT TITLE Meaning The track has already been in the selected group. Select an appropriate track. ( There is a group between the selected tracks. Select appropriate tracks. ( There is no space for storing more group information. (Group information is stored in the same area as title information.
NX-DV3[UJ].book 74 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Troubleshooting Problem Possible cause Possible solution Reference page No sound/video is produced. Improper connection. Connect all cords properly. 15 Headphones are connected. Disconnect the headphone plug. 11 The clock display is flashing. A power failure occurred or the power plug was disconnected. Reset the clock. 19 The disc is upside down. Place the disc on the disc tray with the letter-printed surface facing up.
NX-DV3[UJ]-05.fm 75 ページ ２００５年１月５日 水曜日 午前１０時５９分 Introduction FAQ ■About Disc Q: Can I play DVD videos or video CDs I purchased in foreign countries? A: If the region number (local number) includes "ALL" or "1", and the video format is NTSC, you can play DVD videos. About video CDs, if the video format is NTSC, you can do it. Check the cover of your disc.
NX-DV3[UJ].book 76 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Glossary B.S.P. Static pictures from DVD audios may include not only the pictures displayed automatically together with the audio playback, but also the pictures that can be optionally selected by users. These pictures are called B.S.P (Browsable Still Picture).
NX-DV3[UJ].book 77 ページ ２００４年１２月２８日 火曜日 午後２時３７分 Introduction Specifications ■MD/DVD receiver (CA-NXDV3) Timer Amplifier Output power Front: 30 W + 30 W at 4 Ω (10% THD) Surround: 30 W + 30 W at 4 Ω (10% THD) Input terminals AUX×1, 500 mV/47 kΩ Digital optical input × 2 -23 dBm to -15 dBm (Optical square terminal) (Compatible with frequency of 32 kHz, 44.
NX-DV3[UJ].book 78 ページ ２００４年１２月２８日 火曜日 午後２時３７分 ■Speaker Front (SP-NXDV3F) System 2-way bass reflex type, Magnetically shielded type Speakers Woofer: 10 cm × 1 Tweeter: 4 cm × 1 Power handling 30 W capacity Impedance 4 Ω Frequency range 56 Hz - 40 kHz Sound pressure 85 dB/W•m level Dimensions 125 mm (W) × 251 mm (H) × 188 mm (D) Mass (approx.) 2.1 kg (1 unit) Center/surround (SP-NXDV3S) System 1-way bass reflex type, Magnetically shielded type Speaker 5.
NX-DV3[UJ]-BackCov.
