PD-42/35DX (ASIA) / LCT1373-001A / All cover LCT1373-001A_Cover.
PD-42/35DX (ASIA) / LCT1373-001A / All cover LCT1373-001A_Cover.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 1 Tuesday, January 28, 2003 5:39 PM Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING Always use the power cords which are supplied with the TV and receiver. Some power cords are supplied with this TV.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 2 Tuesday, January 28, 2003 5:39 PM Burn-in A characteristic of Plasma Display Panels (PDPs) is that displaying the same image for a long time causes a part of the image to stay on the screen (this is called phosphor burn-in). Avoid burn-in as follows. Do not display static images or characters for long periods of time.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 3 Tuesday, January 28, 2003 5:39 PM Point defects PDPs use collections of fine pixels to display images. While there is no problem with more than 99.99% of these pixels, please understand that a very small number of pixels may not light or may light all the time. Do not install the TV near electronic equipment that is susceptible to electromagnetic waves It may cause interference in images, sound, etc.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 4 Tuesday, January 28, 2003 5:39 PM CONTENTS Checking contents of packages............5 Setting up your TV..................................6 Mounting the front speakers, and preparing the subwoofer .......................................................6 Installation..........................................................7 Putting the batteries into the Remote control.....7 Connections............................................
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 5 Tuesday, January 28, 2003 5:39 PM Checking contents of packages The TV and components are supplied in three packages. Check that all components are present. Contact your retailer immediately if any components are missing.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 6 Tuesday, January 28, 2003 5:39 PM Setting up your TV • Use the stand designed for this TV. For details of how to attach the stand, refer to the stand users manual. • Ensure that the TV is installed on the wall by a skilled installer. Mounting the front speakers, and preparing the subwoofer Mounting the front speakers Mount the supplied the DD speakers on the left and right of the TV.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 7 Tuesday, January 28, 2003 5:39 PM Setting up your TV Preparing the subwoofer Either stand the subwoofer vertically or lay it down on its side, peel the paper from the supplied rubber feet, and stick the feet in the four corners on the surface to be used as the base. The rubber feet prevent slipping and resonance, and also protect the speaker cord.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 8 Tuesday, January 28, 2003 5:39 PM Connections Caution • Turn off all equipment (including the TV) before connecting anything. Connection diagram AC INPUT 110-240V ENGLISH Cable supplied with TV • Refer to page 13 for connection details.
PD-42/35DX(ASIA) / LCT1373-001A / English Body_Eng.fm Page 9 Wednesday, January 29, 2003 4:20 PM Connections AC INPUT 110-240V Cable supplied with TV • Refer to page 13 for connection details.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 10 Tuesday, January 28, 2003 5:39 PM Connections Connecting the front speakers and subwoofer Use the supplied speaker cords to connect the speakers to the speaker terminals at the back of the TV. Connecting the speaker cord to the front speaker terminal Connect using the supplied front speaker cords (approximately 1.2 m in length).
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 11 Tuesday, January 28, 2003 5:39 PM Connections Bundling speaker cords Use the supplied cord clamps to bundle the connected speaker cords together. Cord clamp Speaker cords ENGLISH • Peel the paper from the back of the cord clamp and attach it at the desired location. To ensure that the cord clamp is firmly attached, wait a few minutes before inserting the speaker cords into the clamp.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 12 Tuesday, January 28, 2003 5:39 PM Connections Connecting the aerial and VCR Fig.A • Aerial cable is not supplied. Use a good quality 75-ohm coaxial cable. • Read the manual that came with the VCR before connecting. Back of the receiver If not connecting a VCR (see fig.A): Connect an aerial cable to the aerial socket on this receiver. ENGLISH If connecting a VCR (see fig.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 13 Tuesday, January 28, 2003 5:39 PM Connections Connecting the power cord to the AC outlet Receiver rear Insert the AC plugs on the power cords from the TV and receiver into AC outlets. Caution IN VIDEO S-VIDEO AUDIO R L/MONO Attaching the ferrite cores Attach ferrite cores to the power cord. Using the power cord without ferrite cores may lead to noise (interference).
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 14 Tuesday, January 28, 2003 5:39 PM Initial settings When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to make the initial settings. 0 ZOOM SURROUND VIDEO PIP 3 Press the 5 and 6 buttons to choose ENGLISH. Then press the a button English is set for the on-screen display description.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 15 Tuesday, January 28, 2003 5:39 PM TV buttons and functions Display front Receiver front How to open the cover S VIDEO AUDIO L R IN(VIDEO-5) ENGLISH Refer to the pages in parentheses for details.
PD-42/35DX(ASIA) / LCT1373-001A / English Body_Eng.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 18 Tuesday, January 28, 2003 5:39 PM Remote control buttons and functions To use the Programme number PR 0 (AV): When the TV and VCR are connected only by the Aerial cable, choosing the Programme number PR 0 (AV) allows you to view images from the VCR. Set the VCR RF channel to the Programme number PR 0 (AV) manually. For details, see “EDIT/MANUAL” on page 34.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 19 Tuesday, January 28, 2003 5:39 PM Remote control buttons and functions Choose the ZOOM mode 1 Press the c button to display the ZOOM menu ZOOM AUTO REGULAR PANORAMIC 14:9 ZOOM 16:9 ZOOM 16:9 ZOOM SUBTITLE FULL Displaying the current time You can display the Current Time on the screen.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 20 Tuesday, January 28, 2003 5:39 PM Remote control buttons and functions Cancelling the PIP function: Press the P button or b button. Using the PIP function You can view two pictures (Main-picture and sub-picture). Two different TV programmes can be watched at the same time, or a TV programme and a video programme from an external device can be watched at the same time.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 21 Tuesday, January 28, 2003 5:39 PM Remote control buttons and functions Using the MULTI-PICTURE function You can display multi-pictures that enable you to easily find a program you want to view. 1 Press the MULTI button to display multipictures The channels are displayed in the channel number order. The multi-pictures will appear in one of the two multipicture modes. You can operate a JVC brand VCR or DVD player.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 22 Tuesday, January 28, 2003 5:39 PM Teletext function ZOOM SURROUND VIDEO P TV PIP MENU OK Using the List Mode You can store the numbers of your favourite teletext pages in memory and call them up quickly using the colour buttons.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 23 Tuesday, January 28, 2003 5:39 PM Teletext function Sub-page Cancel Some teletext pages include sub-pages that are automatically displayed. You can hold any sub-page, or view it at any time. 1 Press the O button to operate the Subpage function Sub-page numbers are displayed at the left of the screen. Colour* Meaning of sub-page number Currently being displayed. White Can be displayed.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 24 Tuesday, January 28, 2003 5:39 PM Using the TV’s menu This TV has a number of functions you can operate using menus. To fully utilize all your TV’s functions, you need to understand the basic menu operating techniques fully. 0 ZOOM SURROUND VIDEO TV ENGLISH HOL P PIP 5 Press the a button to complete the setting The menu disappears.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 25 Tuesday, January 28, 2003 5:39 PM PICTURE SETTING Refer to “Using the TV’s menu” (see page 24) for details of displaying the menu. PICTURE SETTING PICTURE MODE BRIGHT CONTRAST BRIGHT SHARP COLOUR TINT WHITE BALANCE MID BACK TV RESET OK D0014-EN You can choose one of three PICTURE MODEs to adjust the picture settings automatically. BRIGHT: Heightens contrast and sharpness.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 26 Tuesday, January 28, 2003 5:39 PM PICTURE FEATURES Refer to “Using the TV’s menu” (see page 24) for details of displaying the menu.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 27 Tuesday, January 28, 2003 5:39 PM PICTURE FEATURES COLOUR SYSTEM PULL DOWN The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually. 1 Choose COLOUR SYSTEM. Then press the a button The sub-menu of the COLOUR SYSTEM function appears.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 28 Tuesday, January 28, 2003 5:39 PM PICTURE FEATURES PIP PIP POSITION: You can choose one of four positions for the sub-picture. 1 Press the 6 buttons to choose PIP. Then press the a button The PIP menu appears. PIP PIP POSITION ENGLISH MULTI-PICTURE BACK TV OK D0061-EN 2 Press the 6 buttons to choose PIP POSITION 3 Press the 5 buttons to choose the position.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 29 Tuesday, January 28, 2003 5:39 PM SOUND SETTING Refer to “Using the TV’s menu” (see page 24) for details of displaying the menu. You can use the BBE function to enjoy easy-to-listen sound that is faithful to the original sound recorded. SOUND SETTING STEREO/ BASS TREBLE BALANCE SPEAKER BBE CINEMA SURROUND SUBWOOFER ON ON ON HIGH OFF OFF OFF LOW HEADPHONE BACK TV BBE OK OFF: This function is turned off.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 30 Tuesday, January 28, 2003 5:39 PM SOUND SETTING MAIN: You can listen to the sound of the main-picture with your headphones. SUB: You can listen to the sound of the sub-picture with your headphones. • When the sub-picture is a television programme, the sound becomes monaural.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 31 Tuesday, January 28, 2003 5:39 PM VIDEO SETTING Refer to “Using the TV’s menu” (see page 24) for details of displaying the menu. VIDEO SETTING VIDEO-1 VIDEO-3 VIDEO-2 VIDEO-5 VIDEO-4 TV BACK TV ID LIST OK D0020-EN You can have a name corresponding to the devices connected for each VIDEO terminal. Giving a name to a VIDEO terminal makes the VIDEO terminal number appear on the screen, together with the name.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 32 Tuesday, January 28, 2003 5:39 PM FEATURES Refer to “Using the TV’s menu” (see page 24) for details of displaying the menu. FEATURES SLEEP TIMER BLUE BACK OFF ON To set the CHANNEL GUARD function 1 Choose CHANNEL GUARD, then press the o button “SET ID NO.” (ID number setting screen) appears. CHANNEL GUARD SNOW NOISE SET ID NO.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 33 Tuesday, January 28, 2003 5:39 PM FEATURES 3 Press the Number buttons to enter the ID number The lock is temporarily released so you can view the TV channel. If you have forgotten the ID number: Perform step 1 of “To set the CHANNEL GUARD function”. After confirming the ID number, press the b button to exit the menu.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 34 Tuesday, January 28, 2003 5:39 PM INSTALL Refer to “Using the TV’s menu” (see page 24) for details of displaying the menu. INSTALL LANGUAGE AUTO PROGRAM EDIT / MANUAL BACK TV OK D0029-EN AUTO PROGRAM CH 10 20% LANGUAGE ENGLISH You can choose the language you want to use for the onscreen display from the language list in a menu. 1 Choose LANGUAGE, then press the a button A sub-menu of the LANGUAGE function appears.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 35 Tuesday, January 28, 2003 5:39 PM INSTALL 2 Follow the operation description of a function you want to use and operate the function 2 Press the red button to start the ID function EDIT MOVE: This function changes a Programme number (PR) of a TV channel. ID: This function registers a Channel name (ID) to a TV channel.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 36 Tuesday, January 28, 2003 5:39 PM INSTALL 4 Press the Number buttons to enter the remaining CH/CC number The TV shifts to registration mode. When the registration is completed, the picture of the TV channel appears on the screen. • The CH/CC number is a number indicating the broadcast frequency to the TV.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 37 Tuesday, January 28, 2003 5:39 PM INSTALL Changing the TELETEXT LANGUAGE setting After the AUTO PROGRAM function is completed, you can change the country you have already set by using the AUTO PROGRAM function. 1 Display the INSTALL menu 2 Press the 6 buttons to choose AUTO PROGRAM. Then press the a button A TELETEXT LANGUAGE menu appears as a submenu of the AUTO PROGRAM function.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 38 Tuesday, January 28, 2003 5:39 PM Additional preparation Connecting the external devices Connect the devices to the TV, paying attention to the following connection diagram. ENGLISH Before connecting anything: • Read the manuals provided with the devices. Depending on the devices, the connection method may differ from the figure.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 39 Tuesday, January 28, 2003 5:39 PM Additional preparation Connecting devices to the OUT terminal The signals of the images and sound you are currently viewing with this TV are output through the OUT terminal. By connecting a VCR to the OUT terminal, you can record the currently shown image and sound to that VCR. To do this, connect the VCR and OUT terminal following the steps below.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 40 Tuesday, January 28, 2003 5:39 PM CH/CC numbers When you want to use the INSERT function on page 35, find the CH/CC number corresponding to the Channel number of the TV channel from this table. CCIR: The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc. OIRT: The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 41 Tuesday, January 28, 2003 5:39 PM Troubleshooting If a problem arises while you are using the TV, please read this “Troubleshooting” well before you request having the TV repaired. You may be able to fix it easily by yourself. For example, if the AC plug is disconnected from the AC outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 42 Tuesday, January 28, 2003 5:39 PM Troubleshooting Other concerns ENGLISH 42 • When the SLEEP TIMER function operates, the TV is automatically turned off. If the TV is turned off suddenly, try to press the # (Standby) button to turn on the TV once again. At this time, if the TV resumes a normal state, there is no problem.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.book Page 43 Tuesday, January 28, 2003 5:39 PM Specifications Item Model PD-42DX PD-35DX Broadcasting systems B, G, I, D, K, K1 Colour systems PAL, SECAM • The EXT terminals also support the NTSC 3.58/4.43 MHz system. Channels and frequencies VHF low channel (VL) =46.25 to 168.25 MHz VHF high channel (VH) =175.25 to 463.25 MHz UHF channel (U) =471.25 to 855.
PD-42/35DX(ASIA) / LCT1373-001A / English PD-42&35DX_Eng.
PD-42/35DX (ASIA) / LCT1373-001A / All cover LCT1373-001A_Cover.
PD-42/35DX (ASIA) / LCT1373-001A / All cover LCT1373-001A_Cover.