Plasma Display Users Guide For Model: PD-42WV74 TV CATV VCR DVD ASPECT MULTI SCREEN SPLIT INDEX FREEZE SWAP INPUT 1 1 V1 INPUT 2 V2 INPUT 3 V3 INPUT 4 V4 DIGITAL-IN D-IN SELECT 2 4 5 7 8 3 6 9 RETURN+ 0 100+ TV THEATER NATURAL VIDEO PRO CINEMA STATUS SLEEP TIMER DISPLAY SOUND LIGHT + MUTING C.C. C.C.
Important Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock. Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
• As an “ENERGY STAR®” partner, JVC has determined that this product or product model meets the “ENERGY STAR®” guidelines for energy efficiency. IMPORTANT SAFETY INSTRUCTIONS 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
16) Avoid improper installation and never position the unit where good ventilation is impossible. When installing this TV, distance recommendations must be maintained between the set and the wall, as well as inside a tightly enclosed area or piece of furniture. Keep to the minimum distance guidelines shown for safe operation.
WARNING Burn-in A characteristic of Plasma Display Panels (PDPs) is that displaying the same image for a long time causes a part of the image to stay on the screen (this is called phosphor burn-in). Avoid burn-in as follows. IMAGE SHIFT The picture displayed on the screen is shifted up, down and to the left and right at regular intervals. In order to prevent burn-in, set this function to FAST or STD. (Refer to page 43.
WARNING If Burn-in has occurred If burn-in occurs, try the BURN-IN IMAGE REDUCER function (page 48). If burn-in is minimal it may gradually become less noticeable. Note: Once burn-in occurs it will never disappear completely. Point defects PDPs use collections of fine pixels to display images. While there is no problem with more than 99.99% of these pixels, please understand that a very small number of pixels may not light or may light all the time.
Table of Contents Quick Setup . . . . . . . . . . 8 Unpacking your TV . . . . . . Attaching the stand to the TV . TV/Receiver . . . . . . . . . . TV Remote Control . . . . . . Getting Started . . . . . . . . Set Up Your TV . . . . . . . The Remote Control . . . . . Connections . . . . . . . . . . Connecting Your Devices . . Plug-In Menu . . . . . . . . . The Interactive Plug In Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 .
Quick Setup Unpacking your TV Thank you for your purchase of a JVC Color Television. Before you begin setting up your new television, please check to make sure you have all of the following items.
Quick Setup Attaching the stand to the TV Read the following instructions and then attach the supplied stand to the TV. WARNING: The TV is heavy. It should always be carried by at least two people. Attempting to carry it by yourself may lead to it being dropped causing injuries and damage. Required items: Phillips screwdriver 1. Attach the screws (A) to the back of the TV. Screw (A) 2. Attach the TV to the stand.
Quick Setup TV/Receiver NOTE: Before you connect your receiver to another device, please refer to the proper diagrams for your specific TV and remote. Display Front Refer to the pages in parentheses for details.
Quick Setup TV Remote Control TV CATV VCR DVD ASPECT MULTI SCREEN SPLIT INDEX FREEZE SWAP SELECT 1 2 INPUT 1 V1 INPUT 2 4 5 6 7 8 9 100+ 0 V2 INPUT 3 V3 RETURN+ INPUT 4 V4 3 TV THEATER NATURAL VIDEO DIGITAL-IN PRO CINEMA STATUS D-IN SLEEP TIMER DISPLAY SOUND LIGHT + MUTING C.C. C.C.
Quick Setup Getting Started Getting Started These quick setup pages will provide you, in four easy steps, with the basic information you need to begin using your new television right away. If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual. STEP 1 - Set Up Your TV Caution • Turn off all equipment (including the TV) before connecting anything.
Quick Setup Getting Started Connecting the TV and receiver Use the supplied power cord which best suits the area in which you live. Back of the TV Use the supplied system cable to connect the TV to the receiver. The two connectors are of different shapes. Ensure that the pins on connector 1 are oriented correctly, press the connector into the socket, and tighten the screws at left and right to lock it in place. Press connector 2 firmly into place until it is locked.
Quick Setup Getting Started Step 2 – The Remote Control Before you can operate your remote control, you first need to install the batteries (included). Slide the cover on the back of the remote down towards the bottom of the remote control. Insert two batteries (included) carefully noting the “+” and “–” markings, placing the “–” end in the unit first. Slide the cover back into place. When you change the batteries, try to complete the task within three minutes.
Quick Setup Getting Started Basic Operation Turn the television on and off by pressing the POWER button at the top right corner of the remote. If this is the first time you are turning on the TV, the interactive plug-in menu appears. • Turn on the TV after connecting it to the other surrounding devices. (Refer to page 16.) • Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if you need to operate a cable box. • Slide the VCR/DVD selector switch to VCR to control a VCR.
Quick Setup Connections Step 3 – Connecting Your Devices To make these connections, you will use plugs like the ones illustrated below. Coaxial Cables Component Cables Composite Cables Audio Cables Ferrite core (accessory) Used to connect audio/video devices like VCRs, DVD players, stereo amplifiers, game consoles, etc. Used to connect an external antenna or cable TV system to your receiver. S-Video Cable Attach the ferrite core to the coaxial cable.
Quick Setup Connections Diagram #1 Note: • If you do not have a cable box, connect the cable wire from the wall outlet into the back of the receiver. Diagram #2 Notes: • Use the S-Video connection if possible for superior picture quality. • Your VCR must be turned on to view premium cable channels.
Quick Setup Connections Notes: • Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user’s manual for your DVD player for more information. • Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or audio output) before starting the other to avoid accidentally switching the cables. • You may also connect the DVD player to Input 1.
Quick Setup Connections Connecting to JVC AV Compu Link JVC’s AV compu link feature makes playing video tapes or DVDs totally automatic. Simply insert a pre-recorded tape into your JVC brand VCR or DVD into your JVC DVD player and the device will automatically turn on and begin playback. At the same time, using the AV compu link, the VCR or DVD player sends a signal to the television telling it to turn on and switch to the proper video input.
Quick Setup Connections Connecting to a Camcorder You may connect a camcorder, game console or other equipment to your television by using the front input jacks (Input 4) located under the front panel door. To access, pull on the door to open it. You can also connect these using the television’s rear input jacks, using the same instructions.
Quick Setup Connections Connecting to a Digital TV Receiver w/HDCP By inputting a high bandwidth digital content protection high definition picture source to the digital-in terminal of this television, high-definition pictures can be displayed on the screen in their digital form. (This terminal is for use in the future when high bandwidth digital content protection DTV decoders and DVD players and D-VHS are put on the market.) After the connections have been made, tighten the screw to secure the cables.
Quick Setup Connections Connecting to an AV Receiver using your television’s V1 Smart Input By connecting your AV Receiver to your television's V1 smart Input, you can watch picture sources from many diffeent devices, without having to change or use the other input connections on your TV. This allows you to free up other input connections so you can connect more devices to your television.
Quick Setup Plug-In Menu Step 4 – The Interactive Plug In Menu When you turn your television on for the first time the interactive plug-in menu will appear. The plug-in menu helps you to get your TV ready to use by letting you set your preferences for: • The language in which you want the onscreen menus to appear. • Setting the TV’s clock to the correct time so your timer functions will work properly. You can choose “AUTO” or “MANUAL” for setting the clock.
Quick Setup Plug-In Menu Auto Clock Set Before you use any of your TV’s timer functions, you must first set the clock. You may precisely set your clock using the XDS time signal broadcast by most public broadcasting stations. If you do not have this in your area, you will have to set the clock manually. See manual clock set below.
Quick Setup Plug-In Menu Auto Tuner Setup In auto tuner setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the CHANNEL +/– buttons) you will receive only clear, active channels. ¥ To choose CABLE or AIR (or SKIP when you skip Auto Tuner Setup) To START NOW PROGRAMMING ! 48 Programming will take approximately 1 to 2 minutes.
Remote Programming Setting the CATV, VCR and DVD Codes You can program your remote to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer. Cable Box or Satellite Codes The remote control is programmed with cable box and satellite codes for power on/off, channel up/down, and 10 key operation.
Remote Programming VCR Codes The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward, rewind, pause, record, channel up/down operation. 1) Find the VCR brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”. 3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10 key pad. 4) Release the DISPLAY button, and confirm the operation of the VCR.
Remote Programming DVD Codes The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward, rewind, previous/next chapter, tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”. 3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10 key pad.
Remote Programming Search Codes Cable/Satellite Search Codes Function 1) Slide the first 2-Way Mode Selector switch to CATV. 2) Press and hold down the POWER button, then press the RETURN+/TV button for more than three seconds. 3) Release the RETURN+/TV button, then release the POWER button. 4) Press the POWER button on the remote, and see if the cable or satellite box responds. 5) If there was a response, press RETURN+/TV. The codes are now set. If there was no response, repeat Step 4.
Onscreen Menus Using the Guide Certain symbols are used throughout this guide to help you learn about the features of your new television. The ones you will see most frequently are: Up and Down arrows mean press the CH+ or CH– buttons.
Onscreen Menus The Onscreen Menu System Your television comes with JVC’s onscreen menu system. The onscreen menus let you make adjustments to your television’s operation simply and quickly. Examples of the onscreen menus are shown on the next page. Detailed explanations on using each menu follow later in this guide. For information about the interactive plug-in Menu, see pages 23-25. The Onscreen Menu System To open the onscreen menu system, press the MENU button on the remote control.
Onscreen Menus Press the MENU button INITIAL SETUP 03 INITIAL SETUP 04 PICTURE ADJUST 01 INITIAL SETUP 02 PICTURE ADJUST 02 INITIAL SETUP 01 SOUND ADJUST CLOCK/TIMERS Notes: • The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the digital-in terminal and the picture is being displayed on the screen. 32 • When the Menu button on the TV front panel is pressed, the FRONT PANEL CONTROL menu between INITIAL SETUP 03 and PICTURE ADJUST 01 will appear.
Initial Setup Auto Tuner Setup The auto tuner setup function is described on page 25 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below. Press the MENU button To AUTO TUNER SETUP ¥ ¥ To operate To choose CABLE or AIR Press the OK button to start Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the message PROGRAMMING OVER! appears onscreen.
Initial Setup Channel Guard Message When a viewer attempts to watch a guarded channel, the following message appears: To watch a channel that you have locked, enter the Lock Code using the 10 key pad. If the wrong code is entered, the message “INVALID LOCK CODE!” will flash on the screen. The channel cannot be accessed until the correct code is entered. Notes: • Once a channel has been unlocked, it will remain unlocked until the television is turned off. THIS CHANNEL IS LOCKED BY CHANNEL GUARD.
Initial Setup Unrated Programs Unrated programming refers to any programming which does not contain a rating signal. Programming on television stations which do not broadcast rating signals will be placed in the “Unrated Programming” category.
Initial Setup US V-Chip Ratings U.S. PARENTAL RATING SYSTEMS Programs with the following ratings are appropriate for children. ❒ TV Y is Appropriate for All Children Programs are created for very young viewers and should be suitable for all ages, including children ages 2 - 6. ❒ TV Y7 is for Older Children Most parents would find such programs suitable for children 7 and above. These programs may contain some mild fantasy violence or comedic violence, which children should be able to discern from reality.
Initial Setup Setting US V-Chip Ratings Press the MENU button To V-CHIP ¥ T o operate (The lock icon appears) Press ZERO to access the V-Chip menu ¥ To turn V-Chip ON or OFF To move to SET US TV RATINGS Directions to set US V-Chip Ratings Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and press the or ¥ to move the cursor to the correct location. Press OK to turn the locking feature on or off.
Initial Setup Movies Ratings ❒ NR – Not Rated This is a film which has no rating. In many cases these films were imported from countries which do not use the MPAA ratings system. Other NR films may be from amateur producers who didn’t intend to have their film widely released. NR (Not Rated) Programming may contain all types of programming including children’s programming, foreign programs, or adult material.
Initial Setup Canadian V-Chip Ratings ❒ E – Exempt Exempt programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming. ❒ C – Programming Intended for Children Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or unrealistic in nature.
Initial Setup Set Lock Code Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes pre-set with a lock code of “0000”. You may change the code to any four-digit number you wish. To change the lock code, follow the steps below.
Initial Setup Auto Demo This function lets you preview the many different viewing modes of your TV. It will cycle through “index”, “split demo”, “freeze”, all of the different “aspect” ratios and all of the different “video status” modes. Press the MENU button To AUTO DEMO ¥ To turn AUTO DEMO ON or OFF Notes: • Auto demo starts 2 seconds after it is set to ON.
Initial Setup Digital-In The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a 480p picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when a 480p picture signal is being displayed on the screen. There are two types of 480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted by selecting either SIZE1 or SIZE2.
Initial Setup Audio Out If your television is connected to an external speaker source, audio out gives you the option of controlling the volume level with your TV’s remote control. Press the MENU button ¥ To AUDIO OUT To VARI or FIX Press the MENU button when finished VARI: Lets you adjust the volume of the external speakers using the VOLUME +/– buttons on your TV’s remote control. FIX: The volume of the external speakers is adjusted using the audio device’s remote control.
Initial Setup Closed Caption Many broadcasts now include an onscreen display of dialog called closed captions. Some broadcasts may also include displays of additional information in text form. Your television can access and display this information using the closed caption feature. To activate the closed caption feature, follow the steps below.
Initial Setup Front Panel Lock This allows you to lock the keys on the front of the TV, so that a child may not accidentally change your viewing preferences. Press the MENU button To FRONT PANEL LOCK ¥ To turn ON or OFF Press the MENU button when finished You can turn off this feature in the following ways: • Unplug the power cord, and plug it back in. Do this if your batteries die, or you lose your remote control. • Use the remote control.
Initial Setup Auto Shut Off This function automatically shuts off your TV when there is no signal from the channel the TV is on. Press the MENU button To AUTO SHUT OFF ¥ To turn ON or OFF Press the MENU button when finished • If the channel that you have on does not receive a signal for more than one minute, the blinking text “NOT RECEIVING A SIGNAL” appears on the screen, and starts the countdown. If no signal is being received within 10 minutes, the TV shuts itself off.
Picture Adjust Picture Settings These settings allow you to change and adjust the way the picture appears on your television. TINT Tint allows you to adjust the levels of red and green in your TV picture. COLOR The color function lets you make all the colors in the TV picture appear either more vivid or subtle. PICTURE Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker or brighter picture overall.
Picture Adjust Digital Noise Clear With digital noise clear, this helps take our static or noise from a channel that may not be coming in clearly. Press the MENU button To DIG. NOISE CLEAR ¥ To enter To select the mode “LOW”, “HIGH” or “OFF” Press the MENU button when finished Color Management This TV supports the COLOR MANAGEMENT function to ensure dull colors are compensated to produce natural hues.
Sound Adjust Sound Settings These settings allow you to change and adjust the way the picture appears on your television. BASS – You can increase or decrease the level of low-frequency sound in the TV’s audio with the bass adjustment. TREBLE – Use treble to adjust the level of high-frequency sound in your TV’s audio. BALANCE – Adjust the level of sound between the TV’s left and right speakers with the balance setting.
Clock/Timers Set Clock The set clock function is described on page 26 as the interactive plug-in menu. You can choose to set the clock automatically, or manually. If you need to set the clock again, follow the steps below. Press the MENU button To SET CLOCK ¥ To operate When you set the clock automatically, choose AUTO by pressing the To TIME ZONE ¥ To select your time zone To D.S.T. (daylight savings time) ¥ To turn D.S.T. ON or OFF ¥ or arrows.
Clock/Timers On/Off Timer The on/off timer lets you program your television to turn itself on or off. You can use it as an alarm to wake up, to help you remember important programs, or as a decoy when you’re not home. Press the MENU button To ON/OFF TIMER ¥ ¥ To operate (begins with ON TIME) ¥ To set the hour (AM/PM) you want the TV to turn on To move to minutes To set the minutes To accept ON TIME and move to OFF TIME (the time the TV will turn off).
Button Functions Multi Screen Function Your television has two kinds of screen: SPLIT (2 channels) and INDEX (12 channels). Note: After you press any multiscreen button, if you press the menu button, only the picture adjust screen will appear. Split Activate the split-screen option by pressing SPLIT on the remote control. A channel and input will now appear onscreen. The channel (or input) you were watching before pressing SPLIT will appear on the left, the input will appear on the right.
Button Functions Index This allows you to quickly look at up to 12 channels at a time so that you can decide which one to watch. Notes: • Only RF input signal will be displayed. • You can watch the channel added in channel summary. See page 33. Freeze Pressing the FREEZE button causes the screen to change to the split-screen display with the still picture displayed on the right. In order to return to the normal display, press the FREEZE button once again.
Button Functions Power Turns the TV on or off. Press the POWER button Number Buttons - 10Key Pad Use the number buttons on the remote control to move directly to a specific channel. For example, to move to channel 7: 0 (Zero) 7 (Seven) 100+ Button Use the 100+ button to directly access channels above channel 99. For example, to move to channel 124, press 100+, 2 (Two), 4 (Four).
Button Functions Return +/TV The return+/TV button has three functions: Return - Returns to the channel viewed just before the channel currently onscreen. Return+ - Lets you program a specific channel to return to while scanning through the channels using the CH+ and CH– buttons. TV - Returns to the TV mode. RETURN+/TV and hold for three seconds RETURN CHANNEL PROGRAMMED ! The channel currently active has been programmed as your return+ channel. Now scan through the channels using the CHANNEL+/– buttons.
Button Functions Muting The MUTING button instantly turns the volume down completely when you press it. Press MUTING and the volume level will instantly go to zero. To restore the volume to its previous level, press MUTING again. Video Status The Video status button gives you a choice of four TV picture display settings, including a display of your own preferences. Standard - Resets the picture display to the standard settings.
Button Functions Sleep Timer The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals of 15 minutes, for a total time of up to 180 minutes. Press the SLEEP TIMER button Sleep Timer Message 20 seconds before the automatic shutoff, this message will appear: GOOD NIGHT!! PUSH SLEEP TIMER BUTTON TO EXTEND. You then have 20 seconds to press the SLEEP TIMER button to delay the shut off for another 15 minutes.
Button Functions Aspect This feature will help you adjust the picture you are watching to give you the best possible picture quality. Aspect Ratios PANORAMA - With this ratio a normal 4:3 aspect picture is stretched to fit the dimensions of the 16:9 aspect screen. REGULAR - The regular ratio is used when you want to watch a 4:3 broadcast or recorded program without modifying the original picture to fit the dimensions of your 16:9 screen.
Button Functions Aspect Ratios (Continued) Press the ASPECT button • By pressing the ASPECT button, you can change the size. When you change the aspect ratios, it is different from their broadcast or recorded program. NTSC, 480i, 480p, HDCP 480p HD, HDCP 1080i 720P, HDCP 720p Notes: • You can also choose the size by pressing the buttons. • When you change the aspect ratio or signal, reset the picture position to center. C.C. (Closed Caption) Use the C.C.
Button Functions TV/CATV Slide Switch Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to operate the television’s built-in tuner. Move the switch to CATV to operate a cable box. Note: • See page 28 for information on programming your remote for cable box operation. VCR/DVD Slide Switch You can control a VCR or DVD player with the buttons on the lower part of the remote control. Move the slide switch to VCR or DVD to operate.
Troubleshooting Refer to the table below to check the condition. If you think that there is a problem, contact the JVC Service Center where you purchased the television. PROBLEMS CHECK There is no power - Check for a blown fuse or circuit breaker or a power outage. - Check that the plugs on the power cords from the TV and receiver are connected to wall outlets. The power lamps do not light even though the TV is on Check that POWER INDICATOR in the MENU is not set to OFF.
Troubleshooting PROBLEMS CHECK There are double picures (ghosts) A building or passing airplane can reflec the original signal and produce a second, slightly delayed one. Adjust your antenna position. Picture is snowy (image noise) • Your antenna may be damaged, disconnected or turned. • Check the antenna connection, page 17 in Quick setup. If the antenna is damaged, replace it. Screen is 80% black The Closed Caption Text mode is on. Turn it off in the CLOSED CAPTION Menu, see page 59.
Warnings Caring for the Cabinet Normally, light dusting with a soft, non-scratching duster will keep your TV clean. If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly moistened with water. You can add a few drops of mild liquid detergent to the water to help remove spots of oily dirt. DO NOT allow liquid to enter the TV through the ventilation slots. DO NOT use strong or abrasive cleaners on the TV.
Warranty JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period shown below. (“The Warranty Period”) PARTS 1 YEAR LABOR 1 YEAR This limited warranty is valid only in the fifty (50) United States, The District of Columbia and Commonwealth of Puerto Rico.
Warranty THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILTY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
Authorized Service Centers QUALITY SERVICE HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE: 1 (800) 537-5722 http://www.jvc.com Dear Customer, In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating the unit. In the event that repairs are necessary, call our Customer Relations Department at 1-800-537-5722 or visit our website at www.JVC.com Remember to retain your Bill of Sale for Warranty Service.
Specifications MODEL PD-42WV74 Type Plasma Display Reception Format NTSC, BTSC System (Multi-Channel Sound) 1080i DTV digital broadcast ready Reception Range VHF 2 to 13, UHT 14 to 69 Sub, Mid, Super, Hyper et Ultra bands (180 channel frequency synthesizer system) Power Source AC 120V, 60Hz TV : 340W Power Consumption Screen Size Receiver : 27W 42 inch / 107.
JVC COMPANY OF AMERICA Division of JVC Americas Corp. 1700 Valley Road Wayne, New Jersey, 07470 JVC CANADA, INC.