User's Manual

ManualsBrandsJVC ManualsProjectorsJVC Projector DLA-HD550

JVC D-ILA

Projector

DLA-HD350 / DLA-HD750

DLA-HD550 / DLA-HD950

DLA-HD990

DLA-RS10 / DLA-RS20

DLA-RS15 / DLA-RS25

DLA-RS35

RS-232C and Infrared

Remote Control Guide

Version 1.1

Contents

Introduction..................................................................................................................2

RS-232C Command Types..........................................................................................2

Direct Commands List .................................................................................................3

Remote Control Emulation Commands List.................................................................4

Converting & Testing Codes........................................................................................7

Acknowledgement Response Return Codes - Basic ...................................................8

Acknowledgement Response Return Codes - Advanced............................................9

RS-232C Interface Details.........................................................................................12

RS-232C Command Format......................................................................................13

Infrared Control..........................................................................................................14

Summary of content (14 pages)

PAGE 1
® JVC D-ILA Projector DLA-HD350 / DLA-HD750 DLA-HD550 / DLA-HD950 DLA-HD990 DLA-RS10 / DLA-RS20 DLA-RS15 / DLA-RS25 DLA-RS35 RS-232C and Infrared Remote Control Guide Version 1.1 Contents Introduction..................................................................................................................2 RS-232C Command Types..........................................................................................2 Direct Commands List ............................................................
PAGE 2
JVC D-ILA Projector Remote Control Guide Introduction This guide is intended to provide all of the information required to enable Remote Control of JVC D-ILA projectors, either by RS-232C connection or by Infrared Remote Control. This will enable Custom Installers or users to remotely control almost every function on these projectors.
PAGE 3
JVC D-ILA Projector Remote Control Guide Direct Commands: POWER Command Power Off Power On Hex Code 21 89 01 50 57 30 0A 21 89 01 50 57 31 0A INPUT SWITCHING Command Input – S-Video Input – Video Input – Component Input – PC (HD750/950/990/RS20/25/35) Input – HDMI 1 Input – HDMI 2 Input + (Go to next highest input) Input – (Go to next lowest input) Hex Code 21 89 01 49 50 30 0A 21 89 01 49 50 31 0A 21 89 01 49 50 32 0A 21 89 01 49 50 33 0A 21 89 01 49 50 36 0A 21 89 01 49 50 37 0A 21 89 01 49 50 2B 0A 21
PAGE 4
JVC D-ILA Projector Remote Control Guide Remote Control Emulation Commands Command Advanced (HD550/950/990/RS15/25/35) (Direct access to Picture Adjust > Advanced) Aspect – 16:9 Aspect – 4:3 Aspect – Zoom Aspect + (cycles through all available modes) Back (steps backwards through menus and removes any OSD messages) BNR (Block Noise Reduction) Off BNR (Block Noise Reduction) On Brightness – Brightness + Brightness Adj. (Adjustment Bar On/Off toggle) CEC – Off CEC – On Colour – Colour + Colour Adj.
PAGE 5
JVC D-ILA Projector Remote Control Guide Command Gamma – C Gamma – D (HD550/950/990/RS15/25/35) Gamma – Custom1 Gamma – Custom2 Gamma – Custom3 Gamma – Normal Gamma + (cycles through all options) Hide (On/Off toggle) Information (displays Information tab of menu) Input – Component Input – HDMI-1 Input – HDMI-2 Input – PC (HD750/950/990/RS20/25/35) Input – S-Video Input – Video Input + (cycles through all inputs) ISF – Off (HD950/990/RS25/35) ISF – On (HD950/990/RS25/35) Keystone Correction Horizontal – Keys
PAGE 6
JVC D-ILA Projector Remote Control Guide Command Picture Mode – User1 Picture Mode – User2 Picture Mode – User3 Power – Off (send twice to switch off) Power – On Quick Align (PC input on HD750/950/990/ RS20/25/35) RNR (Random Noise Reduction) – RNR (Random Noise Reduction) + Sharpness – Sharpness + Sharpness Adj.
PAGE 7
JVC D-ILA Projector Remote Control Guide Converting & Testing Codes The codes shown on pages 3-6 are raw hex codes and must be converted to the appropriate format in order to work with proprietary controllers such as those from Crestron or AMX.
PAGE 8
JVC D-ILA Projector Remote Control Guide Acknowledgement Response Return Codes - Basic In most installations, it will normally be sufficient just to send a command to the projector and assume that the projector will carry it out requested. In some installations, there may be a requirement to confirm that the projector has carried out the command before continuing. This is particularly important when sending multiple commands.
PAGE 9
JVC D-ILA Projector Remote Control Guide Acknowledgement Response Return Codes - Advanced For some functions, it is possible to obtain a more detailed response from the projector. This is useful where different actions are required depending on the current projector settings or status.
PAGE 10
JVC D-ILA Projector Remote Control Guide Input Status (to confirm the current Video Input) Enquiry Command (to projector) 3F 89 01 49 50 0A 06 89 01 49 50 0A 40 89 01 49 50 RR 0A Response (from projector) Response (RR) 30 31 32 33 36 37 Meaning S-Video Video Component PC (HD750/HD950/HD990/RS20/RS25/RS35 only) HDMI 1 HDMI 2 Gamma Table (to confirm the current Gamma Table) Enquiry Command (to projector) 3F 89 01 47 54 0A 06 89 01 47 54 0A 40 89 01 47 54 RR 0A Response (from projector) Response (RR) 30 31 3
PAGE 11
JVC D-ILA Projector Remote Control Guide There is one enquiry command that has a different response from the projector to those listed above. This is the Model Status enquiry. When this enquiry sent to the projector, the projector will respond with a 14-byte string that identifies the model number(s) of the projector.
PAGE 12
JVC D-ILA Projector Remote Control Guide RS-232C Interface Details The RS-232C interface on the projector is a standard 9 pin D-Sub male socket. The pin connections for the projector are as follows: Pin No.
PAGE 13
JVC D-ILA Projector Remote Control Guide Command Format The RS-232C commands are bidirectional and consist of a variable number of hexadecimal numbers. All of the commands sent to the projector shown in this guide are either 7 bytes or 10 bytes long. The Acknowledgement Response Return Codes returned from the projector can be between 6 and 14 bytes long. The basic format of the commands is as follows: Section Header Unit ID Command Data End Size 1 byte 2 bytes 2 bytes Variable 1 byte.
PAGE 14
JVC D-ILA Projector Remote Control Guide Infrared Control It is also possible to control JVC D-ILA projectors via Infrared Remote Control Signal Emulation, though is this sometimes slightly more difficult to achieve than RS-232C control due to the differences in Infrared emulation methods between the various equipment manufacturers. To send an Infrared command to the projector, the required format is 73, followed by the ASCII value in hex of the command required.