EXA10[B].
EXA10[B].book Page 1 Thursday, August 4, 2005 10:01 PM Warnings, cautions and others CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION — F button! Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). The F button in any position does not disconnect the mains line. • When the system is on standby, the STANDBY lamp lights red.
EXA10[B].book Page 2 Thursday, August 4, 2005 10:01 PM CAUTION — Proper Ventilation To avoid risk of electric shock and fire and to protect from damage, locate the apparatus as follows: Top/Front/Back/Sides: No obstructions should be placed in the areas shown by the dimensions below. Bottom: Place on the level surface. Maintain adequate air path for ventilation by placing on a stand with a height of 10 cm more. In addition, maintain the best possible air circulation.
EXA10[B].book Page 3 Thursday, August 4, 2005 10:01 PM Warnings, cautions and others (continued) Information for Users on Disposal of Old Equipment [European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life.
EXA10[B].book Page 4 Thursday, August 4, 2005 10:01 PM SAFETY INSTRUCTIONS “SOME DOS AND DON'TS ON THE SAFE USE OF EQUIPMENT” This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. ✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮ Do read the operating instructions before you attempt to use the equipment.
EXA10[B]-TOC.fm Page 1 Monday, August 8, 2005 4:44 PM Table of contents Introduction Playing back DVDs/CDs Supplied accessories ......................................2 Part description ...............................................3 Basic operations of the DVD player ..............23 DVD player ......................................................... 3 Receiver.............................................................. 4 Using the remote control .................................
Page 2 Monday, August 8, 2005 4:44 PM Supplied accessories Listening to the sound of other audio equipment Listening to the sound of other audio equipment ...................................................44 Timer Timer .............................................................45 Using the playback timer .................................. 45 Using the sleep timer ........................................ 47 Reference Special cautions ............................................48 Notes on handling..
EXA10[B].book Page 3 Thursday, August 4, 2005 10:01 PM Part description The numbers refer to the pages in which the parts are explained. DVD player Front panel See “Display window” shown below. 5 26–29, 31 13, 14 14 23 23, 31 23, 27 Rear panel For future use 10 10 12 49 10 12 13 Display window The receiver and the DVD player use the same design for their display windows.
EXA10[B]-01.fm Page 4 Monday, August 8, 2005 4:46 PM Introduction The numbers refer to the pages in which the parts are explained. Receiver Front panel See “Display window” shown below. 18 5 13, 14 14 16 * 17 18, 23, 44 * This terminal is for connecting a pair of headphones equipped with a stereo plug (not supplied). When the headphones are connected, the speakers do not produce any sound.
EXA10[B].book Page 5 Thursday, August 4, 2005 10:01 PM Using the remote control The numbers refer to the pages in which the parts are explained.
Page 6 Wednesday, August 24, 2005 12:38 PM Operating the TV using the remote control You can operate your TV using the remote control of this system.
EXA10[B].book Page 7 Thursday, August 4, 2005 10:01 PM Preparation Connections Do not turn on the power until you complete the connection. Standard setup DVD player Speaker Receiver Speaker Connecting the antennas Connecting the AM loop antenna (supplied) 1 Set up the AM loop antenna. 3 Turn the AM loop antenna to find the best position for radio reception. Place the AM loop antenna as far from the receiver as possible.
Page 8 Thursday, August 4, 2005 10:01 PM Connecting the FM antenna (supplied) 7 When radio reception with the supplied FM antenna is poor, or when using a communal antenna FM antenna Antenna cord (not supplied) or Receiver (rear panel) Stretch out the FM antenna to the best position for radio reception, and then fix the FM antenna with adhesive tape. Communal antenna terminal Receiver (rear panel) Converter (not supplied: compatible with 300 C/75 C) Preparation EXA10[B].
EXA10[B]-02.fm Page 9 Monday, August 8, 2005 4:47 PM Connections (continued) Do not turn on the power until you complete the connection. Connecting the speakers There is no difference between the left and right speakers. Speaker terminal Before connecting the speaker cords, twist and pull off the insulation.
Connecting the receiver and the DVD player Make sure to connect the three supplied cords. Preparation EXA10[B]-02.fm Page 10 Wednesday, August 24, 2005 10:28 AM DVD player (rear panel) Synchronization cord (supplied) Optical digital cord (supplied) CAUTION • Do not fold the optical digital cord as this may damage the inner wire. Audio cord (supplied) If protection caps cover the tips of the optical digital cord, pull off the protection caps before connecting.
EXA10[B]-02.fm Page 11 Monday, August 8, 2005 4:48 PM Connections (continued) Do not turn on the power until you complete the connection. Connecting other equipment Connecting other speakers Remote control mode selector To connect speakers other than the ones supplied, follow the operations shown below. 1 2 7 2 /3 (cursor)/ ENTER 3 BASS ADJUST Connect the speakers to the SPEAKERS WOOFER LEFT and RIGHT terminals on the receiver. Hold down BASS ADJUST for 2 or more seconds.
Page 12 Monday, August 8, 2005 4:48 PM Connecting a TV Connecting other audio equipment Connecting a TV with the AV OUT terminal TV Output Other audio equipment Preparation EXA10[B]-02.
EXA10[B]-02.fm Page 13 Monday, August 8, 2005 Connections (continued) 3 4:48 PM Do not turn on the power until you complete the connection. Press SCAN MODE. • The current video signal type will flash. 4 Press 2, 3 (cursor) or SCAN MODE repeatedly to select the video signal type suitable for the TV. • You can select “RGB”, “Y/C” or “PROGRESSIVE”. • Select “RGB” when a TV compatible with composite video signals is connected to the AV OUT terminal.
EXA10[B]-02.fm Page 14 Wednesday, August 24, 2005 3:56 PM Basic operations Basic operations Turning on/off the system DIMMER Remote control mode selector DISPLAY F AUDIO Receiver F DVD 1 0 OPEN/ CLOSE FM/AM CC CONVERTER AUX MUTING AUDIO VOLUME +/ – 2 8 • The power of the receiver will turn on and the STANDBY lamp on the receiver will turn off. • Press F AUDIO again to turn off the power of the receiver. • With the power off, pressing any of the following buttons also turns on the receiver.
EXA10[B]-02.fm Page 15 Wednesday, August 24, 2005 10:28 AM Basic operations (continued) Setting the clock You can set the clock when the receiver is turned either on or off. Example: To set the clock to 10:30 a.m. on Wednesday 1 2 Slide the remote control mode selector to RECEIVER. Press CLOCK/TIMER. Display on the receiver 8 Press SET. • The clock starts from 0 seconds in the minute you set. NOTE • While setting the clock, you can return to the previous step by pressing CANCEL.
EXA10[B].book Page 16 Thursday, August 4, 2005 10:01 PM Dimmer Adjusting the volume Changing the brightness of the display windows on the receiver and the DVD player 1 You can set the brightness of the display windows on the receiver and the DVD player respectively. 2 2 Slide the remote control mode selector to RECEIVER or DVD. Press DIMMER repeatedly. Turning off the sound temporarily (MUTING) 1 • Each time you press DIMMER, the setting changes on the receiver/DVD player.
EXA10[B]-02.fm Page 17 Monday, August 8, 2005 4:59 PM For the locations of the remote control buttons, refer to page 14. Basic operations (continued) Adjusting the bass sound 1 2 Slide the remote control mode selector to RECEIVER. Press BASS ADJUST. Display on the receiver 3 While the selectable values are flashing, press 2 or 3 (cursor) to select the value of the bass frequency. • You can select “100 Hz”, “120 Hz” or “140 Hz”. • The initial setting is “100 Hz”.
EXA10[B].book Page 18 Thursday, August 4, 2005 10:01 PM Listening to radio 3 Remote control mode selector • When the receiver has received an FM stereo broadcast, “ST” (stereo) indicator lights up. • You can also select a radio station using the automatic tuning. FM/AM Automatic tuning: Hold down TUNING or TUNING until the frequency starts changing, and then release the button. When the receiver has received a broadcast, the frequency automatically stops changing.
EXA10[B].book Page 19 Thursday, August 4, 2005 10:01 PM Listening to radio broadcasts (continued) 3 While the preset number is flashing, press PRESET or PRESET to select the preset number you want to use. • You can also select the preset number by using the number buttons. (Refer to “Using the number buttons”. (A page 15)) 4 Press MEMORY or ENTER while the selected number is flashing. • “STORED” will appear and the selected radio station will be stored.
EXA10[B].book Page 20 Thursday, August 4, 2005 10:01 PM 2 Press DISPLAY (Radio Data System) repeatedly. 2 Press SEARCH. Display on the receiver PS (Program Service): While the receiver is searching for Radio Data System information, “WAIT PS” appears and then the radio station names will be displayed. “NO PS” appears if no signal is received.
EXA10[B].book Page 21 Thursday, August 4, 2005 10:01 PM Listening to radio broadcasts (continued) PTY codes: 21 None: Undefined. Finance: Stock market reports, commerce and trading. News: News. Children: Programs targeted at a young audience. Affairs: Topical program expanding or enlarging upon news-debate or analysis. Social: Programs about sociology, history, geography, psychology and society. Info: Programs the purpose of which is to impart advice in the widest sense.
EXA10[B]-03.fm Page 22 Monday, August 8, 2005 4:50 PM Switching to a program type of your choice temporarily The Enhanced Other Networks function allows the receiver to switch temporarily to a broadcast program of your choice (TA, News, or Info) from a different radio station when you are listening to a Radio Data System radio station. • Enhanced Other Networks function is applicable only to the preset radio stations. 1 2 Slide the remote control mode selector to RECEIVER.
EXA10[B]-03.fm Page 23 Monday, August 8, 2005 4:50 PM Playing back DVDs/CDs Basic operations of the DVD player Remote control mode selector 0OPEN/CLOSE DISPLAY Playing back a DVD/CD F AUDIO F DVD DVD FM/AM AUX 3 (play) GROUP/TITLE / PREVIOUS 4 NEXT ¢ SLOW SLOW /¡ 8 MENU/PL 5///2/3 (cursor)/ ENTER ONE TOUCH REPLAY Number buttons /1 7 TOP MENU/PG RETURN 1 2 Slide the remote control mode selector to DVD. Press 0 OPEN/CLOSE. 3 Place a disc. • The disc tray ejects.
Page 24 Monday, August 8, 2005 4:51 PM Slide-show playback This part explains the operation with displays of an MP3 disc as examples. For a JPEG disc, read “track” as “file”. NOTE • When files of different types are recorded on a disc, select the file type to be played back. (A “FILE TYPE ” on page 42) 1 2 Slide the remote control mode selector to DVD. Load a disc.
EXA10[B].book Page 25 Thursday, August 4, 2005 10:01 PM Basic operations of the DVD player (continued) ■VCD/SVCD ■MP3/WMA/ASF/DivX/MPEG1/MPEG2 disc When a disc is played back Track number • PBC (Play Back Control) is a signal recorded in a VCD (version 2.0) for controlling playback. You can enjoy interactive software or software with a search function using a menu screen recorded in a PBC compatible VCD. To play back a disc without the PBC function, follow the instructions below.
EXA10[B]-04.fm Page 26 Monday, August 8, 2005 4:51 PM Changing the display in the display window ■ASF/DivX/MPEG1/MPEG2 disc Normal display (as shown on page 25) File type/group number/track number Receiver 1 2 Slide the remote control mode selector to RECEIVER. Press DISPLAY repeatedly. • Each time you press DISPLAY, the display toggles between the current source (DVD, FM, AM, AUX-DIGITAL or AUX) and the clock.
EXA10[B].book Page 27 Thursday, August 4, 2005 10:01 PM Basic operations of the DVD player (continued) Pausing playback Fast reverse/fast forward search 7 When a disc is played back 1 2 Slide the remote control mode selector to DVD. 7 When a disc is played back 1 Press 8. • To return to normal playback, press 3 (play). Advancing the picture frame by frame Slide the remote control mode selector to DVD. There are two methods in step 2. 2 Press 1 or ¡.
EXA10[B]-04.fm Page 28 Thursday, August 4, 2005 10:33 PM Playing back from a position 10 seconds before (One touch replay) Skipping to the beginning of a chapter/ track/file 7 When a disc is played back 1 2 (PBC off) Slide the remote control mode selector to DVD. Press 7 When a disc is played back ONE TOUCH REPLAY. NOTE • This operation may not be used for some discs. • You cannot go back to the previous title.
EXA10[B]-05.fm Page 29 Wednesday, August 24, 2005 10:30 AM Basic operations of the DVD player (continued) Skipping at about 5 minute intervals You can skip within a file at about 5 minute intervals. This is useful especially when you want to skip within a long file. 7 When a disc is played back 1 2 Resuming playback When playback is stopped in the middle, playback can be started from the stopped position.
EXA10[B]-05.fm Page 30 Wednesday, August 24, 2005 10:30 AM Selecting a track from the menu screen 7 When a disc is stopped or played back 1 (PBC off) 7 When a disc is stopped or played back 1 2 2 Slide the remote control mode selector to DVD. Press MENU/PL or TOP MENU/ PG. 4 No 1 2 3 4 5 6 Press 5///2/3 (cursor) (only for a DVD VIDEO or DVD AUDIO) or the number buttons to select the desired track. • Refer to “Using the number buttons” (A page 15).
EXA10[B]-05.fm Page 31 Monday, August 8, 2005 5:20 PM Convenient functions of the DVD player Remote control mode selector F DVD Playing back a DVD/CD in the desired order (Program playback) GROUP/ TITLE / PREVIOUS 3 (play) 4 You can program a maximum of 99 tracks or chapters. The same track or chapter can be programmed more than once.
3 Page 32 Monday, August 8, 2005 4:54 PM • Before selecting a bonus group of a DVD AUDIO, cancel the “BONUS” display as explained in “Playing back the bonus group” on page 37. • When you try to enter more than 99 chapters or tracks, “MEMORY FULL” appears. • In the case of a VCD, SVCD or CD, when the total playback time reaches 9 hours 59 minutes 59 seconds, “--:--” will be displayed in the display window on the DVD player. Press the number buttons to program chapters/tracks.
EXA10[B]-05.fm Page 33 Wednesday, August 24, 2005 10:30 AM Convenient functions of the DVD player (continued) Playing back a DVD/CD in a random order (Random playback) Playing back a DVD/CD repeatedly (Repeat playback) 7 When a disc is stopped 1 2 3 Slide the remote control mode selector to DVD. Press PLAY MODE repeatedly to display “RANDOM” in the display window on the DVD player. • “RANDOM” will also be displayed on the TV screen. Press 3 (play).
EXA10[B]-05.fm Page 34 Wednesday, August 24, 2005 12:40 PM Playing back a specified part repeatedly (A-B repeat playback) (PBC off) Slide the remote control mode selector to DVD. You can save the settings for program playback, random playback or repeat playback so that the settings are activated even after the DVD player is turned off and then on again. Combining this function with the playback timer (A page 45), you can make a variety of playback settings. Press ON SCREEN twice.
EXA10[B]-05.fm Page 35 Monday, August 8, 2005 4:54 PM Convenient functions of the DVD player (continued) Selecting the subtitles (only for moving image) This part explains the operation with displays of a DVD VIDEO as examples. You can use discs of other types in almost the same manner. 7 When a disc contains subtitles and is played back 1 2 2 Press 5// (cursor) to select a subtitle language. Press ENTER. NOTE • You can use this function with the menu bar (A page 39).
EXA10[B]-05.fm Page 36 Monday, August 8, 2005 4:54 PM Selecting the view angle Magnifying the picture (ZOOM) (only for moving image) 7 When a scene containing multi-view angles is played back 1 2 Slide the remote control mode selector to DVD. (only for moving image) 7 When a disc is played back or paused 1 Press ANGLE. Example: TV screen 2 Slide the remote control mode selector to DVD. Playing back DVDs/CDs For the locations of the remote control buttons, refer to page 31. Press ZOOM.
EXA10[B]-05.fm Page 37 Wednesday, August 24, 2005 10:30 AM Convenient functions of the DVD player (continued) Adjusting the picture quality (VFP) 7 When a disc is played back or paused 1 2 NOTE • If no operation is made for several seconds during the procedure, the settings made so far will be automatically stored. • “VFP” stands for “Video Fine Processor”. Playing back the bonus group Slide the remote control mode selector to DVD. Press VFP.
EXA10[B]-05.fm Page 38 Monday, August 8, 2005 4:55 PM Browsable still pictures (B.S.P.) Some DVD AUDIOs may have pictures called B.S.P. (Browsable Still Pictures). The pictures can be viewed as if you are turning pages. NOTE • You can use this function when “B.S.P.” lights up in the display window on the DVD player. 2 Slide the remote control mode selector to DVD. Press PAGE. • Each time you press the button, the still picture will be changed. You can also switch the picture using 5// (cursor).
EXA10[B]-05.fm Page 39 Wednesday, August 24, 2005 10:30 AM Convenient functions of the DVD player (continued) Using the status bar and the menu bar 7 When a disc is played back 1 2 Slide the remote control mode selector to DVD. Press ON SCREEN twice. • “ON SCREEN” will appear in the display window on the DVD player. The status bar and the menu bar will appear on the TV screen.
EXA10[B]-05.fm Page 40 Wednesday, August 24, 2005 10:30 AM Function list Designating the time (Time search) For functions with no description of the operation, press 5// (cursor) to select and press ENTER to determine the function. 7 When a disc is played back Changes the time information in the display window on the DVD player and the status bar. Each time ENTER is pressed, the display will be changed.
EXA10[B].book Page 41 Thursday, August 4, 2005 10:01 PM Changing the initial settings with the preference screen Basic operations Remote control mode selector 7 When a disc is stopped or no disc is loaded (“NO DISC” is displayed) 1 2 Slide the remote control mode selector to DVD. Press SET UP. • The following screen will be displayed on the TV. 5///2/3 (cursor)/ ENTER SET UP Number buttons • Proceed with operations by following the description on the TV screen.
Page 42 Thursday, August 4, 2005 10:01 PM PICTURE PICTURE AUDIO Items Contents ( MONITOR TYPE 16 : 9 : For an ordinary wide TV. : initial setting) Items Contents ( DIGITAL AUDIO OUTPUT* Select the output signal type suitable to the equipment connected to the DIGITAL OUT terminal (a decoder-built-in amplifier or other digital equipment with an optical input terminal). Refer to “List of relationships of DIGITAL AUDIO OUTPUT preference items and output signal” (A page 43).
EXA10[B]-05.fm Page 43 Wednesday, August 24, 2005 10:30 AM Changing the initial settings with the preference screen (continued) For the locations of the remote control buttons, refer to page 41.
EXA10[B].book Page 44 Thursday, August 4, 2005 10:01 PM Listening to the sound of other audio equipment Adjust the sound input level of the audio equipment Remote control mode selector You can adjust the sound input level of audio equipment connected to the AUX terminals. AUX 1 3 (play) 2 Slide the remote control mode selector to RECEIVER. Press AUX to select “AUX”. • Each time you press AUX, the display on the receiver toggles between “AUX-DIGITAL” and “AUX”.
EXA10[B]-06.fm Page 45 Monday, August 8, 2005 5:01 PM Timer Timer Remote control mode selector 4 F AUDIO Set the starting time and ending time with 2, 3 (cursor), and then press SET. Example: Display on the receiver when setting the starting time to 8:45 Display on the receiver when setting the ending time to 9:45 2/3 (cursor) Number buttons SET CLOCK/ TIMER • Press 2 or 3 (cursor) to select the value and press SET to set the value. • You can use the number buttons instead of 2 or 3 (cursor).
7 8 9 Page 46 Monday, August 8, 2005 5:01 PM Press 2 or 3 (cursor) to select the desired sound source, and then press SET. • If you have selected “FM” or “AM” in this step, press 2, 3 (cursor) or the number buttons to select the preset number of the radio station whose broadcast you want to listen to (Refer to “Using the number buttons” (A page 15)), and then press SET. Press 2 or 3 (cursor) to adjust the playback volume, and then press SET. • You can use the number buttons to specify the volume.
EXA10[B].book Page 47 Thursday, August 4, 2005 10:01 PM Timer (continued) Using the sleep timer When the time you specify elapses, the system will be turned off automatically. 1 2 Slide the remote control mode selector to RECEIVER. Press SLEEP. • Each time you press the button, the time indicated in the display window on the receiver changes (in minutes).
EXA10[B]-07.fm Page 48 Monday, August 29, 2005 11:52 AM Special cautions Care of the cabinet When cleaning the system, use a soft cloth and follow the relevant instructions on the use of chemically-coated cloths. Do not use benzene, thinner or other organic solvents including disinfectants. These may cause deformation or discoloring. Notes on handling 7 Important cautions Installation of the system • Select a place which is level, dry and neither too hot nor too cold; between 5°C and 35°C.
EXA10[B]-07.
Page 50 Wednesday, August 24, 2005 3:57 PM Notes on MP3/WMA/JPEG/ASF discs and files Notes on DivX discs and files • A disc may not be played back, or reading it may take a long time depending on its recording conditions or properties. • The time needed for reading varies with the number of groups or tracks (files) recorded on the disc. • If a character other than single byte English characters is used in the file name of an MP3/WMA/JPEG/ASF file, the track/file name will not be displayed correctly.
EXA10[B].book Page 51 Thursday, August 4, 2005 10:01 PM About DVDs/CDs (continued) Disc structure DVD VIDEO/DVD VR A DVD VIDEO consists of “titles” and each title may be divided into “chapters”. A DVD VR consists of “original programs” or “play lists” and each original program/play list may be divided into “chapters”. .
EXA10[B]-07.fm Page 52 Wednesday, August 24, 2005 10:35 AM When you encounter a problem that seems to be a fault, check the following points before contacting the JVC service center: 7 The screen size is abnormal. Power source 7 The TV screen darkens. 7 Power does not come on. • The power cord of the receiver or the DVD player is not connected to an AC outlet. → Connect the power cord correctly. (A page 13) Operation 7 You cannot operate any button.
EXA10[B].book Page 53 Thursday, August 4, 2005 10:01 PM Troubleshooting (continued) Other 7 You cannot switch audio or subtitles between languages. • The disc does not contain multiple languages. → If only a single language is recorded on the disc, you cannot switch the current language to another language. (A page 35) 7 No subtitle is displayed. • The disc does not contain any subtitles. → A DVD VIDEO without subtitles cannot display any subtitles. • The subtitle language is set to “OFF”.
EXA10[B]-specification.
EXA10[B].
