NETWORK VIDEO RECORDER VR-N1600U VR-N1600E VR-N900U INSTRUCTIONS VR-N1600U/E (A) VR-N900U (B) WARNING LIVE/BROWSE 㧝 㧞 㧟 㧠 SELECT 㧡 㧢 *1/' 㧣 㧤 PTZ/PRESET 㧥 ALARM OPERATE REV FWD HDD LOCK REC CONTROL FUNCTION SERIAL CANCEL ZOOM OUT ZOOM IN SEARCH KEY ALARM CLEAR REC/STOP STOP(PB) PLAY SKIP VR-N1600U/E VR-N900U Please read the following before getting started: Powered by Milestone Thank you for purchasing this JVC product.
IMPORTANT SAFEGUARDS I
SAFETY PRECAUTIONS (for USA) Please use this unit in an appropriate power source. Veuillez employer cette unité dans une source d'énergie appropriée.
SAFETY PRECAUTIONS Please use this unit in an appropriate power source. PRECAUTIONS WHEN MOUNTING RACK CAUTION ● Do not install the VR-N1600U/E/VR-N900U to the rack in places where ambient temperature becomes 40˚C or more. ● When rack mounting, keep the internal temperature of rack assembly 40˚C or less. ● When using rack mount, keep the clearance between the rack and the rear of unit 150mm or more.
INFORMATION (FOR CANADA) RENSEIGNEMENT (POUR CANADA) This Class A digital apparatus complies with Canadian ICES-003. , Cet appareil num rique de la Class A es t WARNING (FOR EUROPE): This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
SICHERHEITSVORKEHRUNGEN (for Germany) Benutzen Sie bitte diese Maßeinheit in einer passenden Energiequelle.
VI
SICHERHEITSVORKEHRUNGEN (for Germany) VII
E/VR-N900U 1600E/VR-N900U E/VR-N900U.
Getting Started Features Supports RAID1 (VR-N1600U/E) Adding a built-in HDD enables support for RAID1. RAID1 writes the same data to two hard disks simultaneously (mirroring), so that one of them remains usable when the other breaks down. Automatic detection of network cameras Significantly reduces the hassle of complex camera registration procedures.
o End-User License Agreement for Milestone's Software embedded in JVC's NVR products This license agreement is a legally binding agreement among you (You, either an individual or a single entity), Milestone Systems A/S (Milestone) and Victor Company of Japan, Limited (JVC) for the software product embedded in JVC's Network Video Recorder(NVR) products (Software), which may include associated software components, media, printed materials, and online or electronic documentation, if any.
Getting Started VR-N1600U/VR-N1600E/VR-N900U (hereinafter referred to as “this device”) is installed with Windows姞XP Embedded Runtime (hereinafter referred to as “the software”), a licensed software from Microsoft Corporation. By using this device and the software, you agree to abide by the following Microsoft Software License Terms. Microsoft Software License Terms for: Windows XP Embedded Runtime These license terms are an agreement between you and JVC. Please read them.
You may use remote access technologies in the software such as Remote Desktop to access the software remotely from another device. You are responsible for obtaining any licenses required for use of these protocols to access other software. ● Remote Boot Feature.
Getting Started Microsoft Software License Terms for: (continued) 4 Windows Update Agent (also known as Software Update Services). The software on the device includes Windows Update Agent ( WUA ) functionality that may enable your device to connect to and access updates ( Windows Updates ) from a server installed with the required server component.
12 Liability Limitations. You can recover from Microsoft and its affiliates only direct damages up to two hundred fifty U.S. Dollars (U.S. $250.00). You cannot recover any other damages, including consequential, lost profits, special, indirect or incidental damages.
Getting Started Contents Getting Started Features ............................................................................ 2 Contents ............................................................................ 8 Precautions for Proper Use of this Product ..................... 10 Part Names and Functions (VR-N1600U/E) ................... 12 Part Names and Functions (VR-N900U) ......................... 16 Rear Panel Terminals ......................................................
Applications Main Menu List ................................................................ 68 List of Menu Screens ................................................... 68 Unit Setting 1 ............................................................... 69 Unit Setting 2 ............................................................... 72 OS Setting ................................................................... 73 Image Server Setting ...................................................
Getting Started Precautions for Proper Use of this Product Locations of Storage and Use 䢇 Do not place this product at the following locations. Doing so may cause this product to malfunction or break down.
Precautions when Moving this Unit Others 䢇 Remove all connected cords before moving 䢇 When there is variation in the supply voltage such as during lightning, operation of this unit may be disabled to protect the system until the supply voltage stabilizes again. Turn off the power and remove the power plug before moving this unit. Failure to do so may cause damage on the cords, and result in fire or electric shock.
Getting Started Part Names and Functions (VR-N1600U/E) Front S T R Q WARNING A B LIVE/BROWSE 㧝 㧞 㧟 㧠 SELECT 㧡 㧢 *1/' 㧣 㧤 PTZ/PRESET 㧥 ALARM OPERATE REV FWD O LOCK REC CONTROL FUNCTION SERIAL CANCEL ZOOM OUT ZOOM IN ENTER P HDD SEARCH KEY ALARM CLEAR REC/STOP STOP(PB) PLAY SKIP CD E F GHIJ K L M A [OPERATE] Button/Indicator Switches operation on or off.
Memo : ● The manual recording mode executes recording from all cameras regardless of the settings in the [Camera Record Setting]. Recording is carried out in accordance with the frame rate selected in [Camera Record Setting]. (A Page 83) L [STOP(PB)] Button Stops playback when you press this button in the playback mode. M [PLAY] Button Plays back at the speed and in the direction specified by the Shuttle Dial position.
Getting Started Part Names and Functions (VR-N1600U/E) (continued) Rear Panel d POWER U ON OFF V W X YZ a b c U [POWER] switch a [SERIAL1 to 4] serial terminals 1 to 4 Switches the power on or off. For connecting the communication control terminals on a mouse (sold separately), flash memory (sold separately), UPS (sold separately) or additional disk drive (sold separately).
Rear I/O Terminals e fhjl n gikm o ON OFF p 䡵 Input ports 䡵 Output ports e [ALARM IN 1 to 8] alarm input terminals 1 to 8 j [COMMON] signal ground terminal Alarm recording is activated when signals are input to these terminals. This is a common ground terminal. Connect it to the signal ground terminal on the connected device. (This can be used when there are insufficient common ground terminals.
Getting Started Part Names and Functions (VR-N900U) Front Panel V U T S R A B Q CDE F G H IJKL M N O P A [OPERATE] Button/Indicator Note : Switches operation on or off. Press the button to turn operation AONB and hold down the button to turn operation AOFFB. The indicator blinks while the recorder is starting up or shutting down. ● Attach the serial port cover supplied with this product if this port is not in use. ● This product may malfunction due to the presence of static electricity.
J [SEARCH] Button Q Jog dial Displays the date and time search screen when in the playback mode. (A Page 40) Plays back a single frame when it is rotated in the playback mode. K [KEY] Button When [KEY] button is pressed while pressing [FUNCTION] button, key operation on front panel will be disabled. (Key locked mode) To disable, perform same procedure again. Press to display or hide the Asoftware keyboardB. Memo : ● Use the software keyboard to input characters.
Getting Started Part Names and Functions (VR-N900U) (continued) Rear Panel i h g f W X Y Za b c d e W [POWER] switch e Connector cover Switches the power on or off. Memo : Memo : ● Be sure to press and hold down the [OPERATE] button on the front panel to shut down the system before switching off the power supply. X [AC IN 120V H 240VH 50Hz/60Hz] power input ● Do not remove the cover.
Rear I/O Terminals j k m o q s t l n p r u 䡵 Input ports 䡵 Output ports j [ALARM IN 1 to 4] alarm input terminals 1 to 4 o [COMMON] signal ground terminal Alarm recording is activated when signals are input to these terminals. This is a common ground terminal. Connect it to the signal ground terminal on the connected device. (This can be used when there are insufficient common ground terminals.
Getting Started Rear Panel Terminals Rear I/O Terminals Terminal [ALARM IN] Remarks 䢇 Name of Input Event 䢇 Name of Input Event Make Contact Input Alarm IN 1 to 8 Rising (VR-N1600U/E) Alarm IN 1 to 4 Rising (VR-N900U) Alarm IN 1 to 8 Falling (VR-N1600U/E) Alarm IN 1 to 4 Falling (VR-N900U) 250 ms and above 250 ms and above Break Make Memo : ● Set the impedance at the output end to 10 kK or lower.
Mounting to a Rack Camera Control Terminal (VR-N900U) Use connection cables according to the table below. Also make sure that you read through the instruction manual of the equipment to be connected. Signal Pin No. RX+ 1 RX- 2 TX- 3 TX+ 4 GND 5 NC 6 NC 7 NC 8 NC 9 Use the supplied rack mount bracket to mount this unit to the EIA rack. For the installation to the rack, consult the specialist or dealer.
Getting Started Operation Lock During Initial Startup VR-N1600U/VR-N1600E/VR-N900U is equipped with an operation lock feature to prevent the system from being turned off accidentally as well as unauthorized recording operations. Perform language setting and automatic camera registration when starting up this unit for the first time. Before Starting Up. Setting Operation Lock 1 Press and hold the [FUNCTION] button, and press the [KEY] button at the same time ● Operation is locked.
2 Check to ensure that the camera is detected Selecting a Language The [Language Setting] screen appears when you start up this unit for the first time. Select the language to use using the steps below. ● After the message disappears, a list of detected cameras is displayed. ● If all the cameras are not detected, press the [Auto Detect] button again. If doing so does not solve the problem, check the connection with the cameras and the IP address of the cameras.
Getting Started During Initial Startup (Continued) Automatic Registration of Cameras (continued) 6 Use the [SKIP] button to select [OK], followed by pressing the [16/ENTER](ZOOM IN/ENTER) button ` ● The [Configure Device] screen appears. 11 Set the display rate of each camera such that the total display rate of all cameras does not exceed 80 ips (VR-N1600U/E), 160 ips (VR-N1600U/E(A)), or 60 ips (VR-N900U). ● The default display rate is set at 8 ips.
C Use the [7/B](5/B) button to display the list of cameras ` Memo : ● Use the [SKIP] to move between the setting items. ● Using the [2/D] or [10/0/E](8/E) button to select a parameter. ` ● To enter numeric characters, press the [SELECT] button to turn on the [SELECT] indicator. After entering the numeric characters, press the [PTZ/PRESET] button to turn on the [PTZ/ PRESET] indicator.
Preparation System Connection Example The following operations are possible with this system.
Note : ● Do not connect LAN1 to the internet. If the internet is busy or the relay equipment fails, you may not be able to save important camera images. To maintain full recording capacity, it is recommended that a dedicated network be used. Be sure to connect the LAN1 camera network to the same segment. (Do not use the address translation of NAT and NAPT etc. or a router.) ● If you connect LAN2 to the internet from a surveillance computer, you will need to configure IP Masquerading.
Preparation Character Input and Mouse Pointer Entering Characters Using a Mouse You can use the software keyboard to input characters when you are using mouse. 1 Press the [KEY] button on the front panel ● The software keyboard appears. ● Press the [KEY] button again to hide the software keyboard. You can input characters and move the mouse pointers in two different ways. ● Operate using the buttons on the front panel. ● Operate by connecting a mouse (sold separately).
Changing Monitor Resolution Precautions when Changing Display Settings You can switch the resolution of the VGA output using the following procedures. ● Press and hold the [FUNCTION] button, and press the [14/ ZOOM OUT](ZOOM OUT/CANCEL) button at the same time. ` BPressing the button each time increases the resolution value. ● Press and hold the [FUNCTION] button, and press the [15/ ZOOM IN](ZOOM IN/ENTER) button at the same time. ` BPressing the button each time decreases the resolution value.
Basic Operation Switching the Power On/ Off Switching the Power On 1 Connect the power cable ● Connect using the power cable supplied to an AC100V (50 Hz/60 Hz) outlet. 2 Turn AONB the power switch at the rear panel. ● A system check will run when the power is turned on. ● The [OPERATE] indicator starts blinking. ● After blinking, the [OPERATE] indicator lights up to indicate that operation has been turned on. ● When the setting is complete, recording starts automatically in the record control mode.
Login ● When [Live viewing Auto Start] is set to AonB, the [Live] screen appears when login is successful. If [Auto Logon] is set to AoffB, the [Login] screen appears after operation has been turned on. (Default setting: AonB) [Live] Screen Memo : ● You can specify the setting of [Live viewing Auto Start] in [Unit Setting 1] of the main menu. (A Page 69) Note : [Logon] Screen Memo : ● Operation on the main unit is disabled if you do not log in.
Basic Operation ● Select a menu with the [2/D] or [10/0/E](8/E) button and press the [16/ENTER](ZOOM IN/ENTER) button to open the selected setting screen. ` The same operation can be done using the [SKIP] button. Opening the Main Menu The following are procedures to open the main menu, which is used for specifying various settings. Note : ● The input ports do not operate when the main menu is displayed. Inputs such as alarms will also be ignored when the main menu is displayed.
NVR Viewer ● You can view live and recorded images using the NVR Viewer. ● NVR Viewer can also be used for remote surveillance of this unit from a PC. (A Page 126) ● Some of the NVR Viewer features may vary during remote surveillance from a PC. [Live] Tab View List [⳯] Button [Views] Section NVR Viewer[Live] Screen Memo : ● NVR Viewer operates by logging into the distribution server inside this unit.
Basic Operation Viewing Live Images via Front Panel Control NVR Viewer This section describes the procedures for viewing live images by using the front panel of this unit. Memo : ● To operate by connecting a mouse (sold separately), refer to [Viewing Live Images via Mouse Control] (A Page 36).
A B C D Operating the Camera PTZ stands for pan, tilt and zoom. If the camera supports the PTZ functions, you can use the keypad, and the [16/ENTER](ZOOM IN/ENTER) and [13/CANCEL](ZOOM OUT/CANCEL) buttons to move the camera up/down (tilt), left/right (pan), or enlarge/reduce the image (zoom). ` 䡵 Pan/Tilt 1 Press the [PTZ/PRESET] button to switch the keypad to the PTZ mode ● The [PTZ/PRESET] indicator lights up.
Basic Operation Viewing Live Images via Mouse Control Select a View For details on the view settings, refer to [Screen Setup] (A Page 60). 1 Select a view from the [Views] section, or from the view list at the upper end of the window This section describes the procedures for viewing live images by controlling the mouse. Displaying the [Live] Screen 1 Select [Live] from the main menu ● The NVR Viewer starts up and the [Live] screen appears.
Memo : ● When you have selected a camera, the blue bar at the top of each live image changes to a lighter blue tone. This bar comes with a tri-color square indicator, which indicates the following features, as well as characters that indicate the operating status of the camera. PTZ Navigation Button Home Button A Event indicator (Left: yellow) Lights up when events specified in the [Camera Record Setting] occur.
Basic Operation Viewing Live Images via Mouse Control (continued) Using Preset Positions You can select a position from the preset list to change the camera orientation to this preset position. (A Page 92 [Defining a Preset Position]) Memo : ● The buttons are only available if the camera is a PTZ camera.
䡵 Camera Shortcut Menus Memo : ● If you have selected a camera for which an audio source has been set on the [Camera Settings] screen of [Camera Record Setting], the preset audio sound is being output. (A Page 55) ● If you have selected a camera for which an audio source has not been specified, the most recently selected audio source will be continuously output. ● When the recorded and live images are simultaneously displayed, the displayed video image and audio sound may not synchronize properly.
Basic Operation Playing Back Recorded Images via Front Panel Control Select a View For details on the view settings, refer to [Screen Setup] (A Page 60). 1 Press the [PTZ/PRESET] button so that the [PTZ/ PRESET] indicator starts to blink This section describes the procedures for viewing recorded images using the front panel of this unit.
Playing, Skipping and Stopping Recorded Images Adjusting the Playback Speed (Jog/ Shuttle Playback) Control using the [PLAY], [SKIP], and [STOP(PB)] buttons. You can adjust the playback speed by turning the jog dial/shuttle dial on the front panel. 䡵 Control using the [PLAY], [SKIP], and [STOP(PB)] buttons on the front panel 䡵 Shuttle Playback ● Rotate the shuttle dial during playback or when playback is paused to start fast forward, fast reverse or slow playback.
Basic Operation Playing Back Recorded Images via Mouse Control [⳯] Button [Views] Section NVR Viewer This section describes the procedures for viewing recorded images by controlling the mouse. Notes: ● The recording frame rate may decline when you are using the [Browse] screen. ● When access to the hard disk occurs frequently, such as when recording and playback of recorded images are performed simultaneously, the playback image may pause and the audio sound may be interrupted.
Select a View For details on the view settings, refer to [Screen Setup] (A Page 60). 1 Select a view from the [Views] section, or from the view list at the upper end of the window Note : ● Do not switch the view frequently within a short time interval. ● When live images do not appear on VN-C625U/VN-C655U, set the password for connecting VN-C625U/VN-C655U on the camera unit as well as this unit again.
Basic Operation Playing Back Recorded Images via Mouse Control (continued) Searching Recorded Image Using the Timeline Browser You can search recorded images using the Timeline Browser to the right of the [Browse] screen. The vertically extended timeline shows the recording status and the number of cameras that can be displayed in the NVR Viewer. Drag the timeline up or down with the mouse while checking the time display pointer. Note : ● The timeline is an approximate value.
Searching Recorded Image from the Alert List A list of recorded images is displayed for each [Alart], such as when motion is detected (A Page 105). 1 Double-click the [Alerts] bar on the [Browse] screen 2 Click [ ] on the [Alerts] list and select an event from the list ● You can select a specific event, camera or [Server]. [Alerts] List NVR Viewer 4 Click and drag within the screen to specify the search area. Event List ● The areas that you have selected become transparent.
Basic Operation Playing Back Recorded Images via Mouse Control (continued) 䢇 [Time] Slider Dragging the slider to the left changes the recording date to an older date, and dragging the slider to the right changes it to a more recent date. Use the top slider bar for fine browsing (x0.4 to x240) within a limited period of time, and use the bottom bar for easy browsing (x20 to x36,000) for longer time spans.
Listening to Audio Sound To listen to recorded audio sound, select the required audio source from the [Audio Source] list of the [Audio] section. To temporarily mute the live audio sound, select the [Mute] check box. NVR Viewer Writing Images/Audio Sound to CDs, DVDs and Other Media (Export) You can write (export) recorded images or audio sound to other media. ● The VR-N1600U/VR-N1600E/VR-N900U unit enables you to write images and audio sound to a CD-R, CD-RW, DVD-R, DVDRW, or USB memory device.
Basic Operation Writing Images/Audio Sound to CDs, DVDs and Other Media (Export) (continued) 8 If you have selected [Database Export...], setting of the following items will be enabled. Burning a CD/DVD (continued) A 5 Select the export format if you have selected B C [AVI/JPEG Export...] ● Select either [AVI] (movie clip) or [JPEG] (still image). ● Select whether to add time stamps to the exported images.
10 Specify the export destination 14 Insert the media (CD-R/RW or DVD-R/RW) that you want to write data to into the CD/DVD drive To write data to a CD/DVD, select [CD]. ● The space available in the media is shown in [Free Media Space]. ● The [Burn] button is enabled (operable). 15 Select the check boxes for the AVI/JPG/DB files that you want to write to the CD from the data list. ● The total volume of the selected data will appear in [Total Selected Vol].
Basic Operation Writing Images/Audio Sound to CDs, DVDs and Other Media (Export) (continued) Writing Data to a USB Memory Device (Operation on the Unit) Insert the USB memory device that you wish to export data to into VR-N1600U/VR-N1600E/VR-N900U, and perform the same procedures for [Burning a CD/DVD] from Steps 1 to 9. (A Page 47) 1 Specify the export destination Deleting Temporary Files (Operation on the Unit) ● To export to a USB memory device, select [USB].
Operation from a Surveillance Computer Follow the same procedures for [Burning a CD/DVD] from Steps 1 to 9. (A Page 47) 1 Specify the export destination Printing Recorded Images (Operation from a Surveillance Computer) You can print out playback images that are displayed on the screen. Note : ● You cannot print directly from this unit. This function is for use by the [NVR Viewer], which is downloaded onto the surveillance computer. 1 Double-click the [Print] bar on the [PLAY] screen.
Basic Operation Recording Camera Images Recording Modes There are four different recording modes. ● Recording Control Mode ● Manual Recording Mode ● EXT REC IN Signal Recording Mode ● Emergency Recording Mode 䡵 Recording Control Mode (A Page 53) This mode performs recording according to the [Camera Record Setting]. The [REC CONTROL] indicator lights up. You can switch the recording control mode on or off by pressing and holding the [REC CONTROL] button. ● Set each camera to on/off using the [Scheduler...
Selecting the Recording Control Mode Scheduler Setting In order to record in the recording control mode, you need to specify the scheduler settings (A Page 53), image recording settings (A Page 55), and picture quality settings (A Page 58) in the main menu [Camera Record Setting]. This feature lets you specify when to switch each camera to the online mode, as well as the online/offline mode of cameras when an event occurs.
Basic Operation Recording Camera Images (continued) Memo : ● Selecting the [E-mail], [Patrolling], and [Enable speedup] check boxes enables you to specify the following settings. A Enable speedup Scheduler Setting (continued) B E-mail Enables you to specify the period to send out the e-mail alert when e-mail alert notification during a motion is selected (A Page 96). C Audio You cannot select this check box. D Patrolling Enables you to specify the patrol scheme and patrolling period.
䡵 Camera/Alert Scheduler Screen A B Specifying Image Recording Settings C 1 Select [Camera Record Setting] from the main menu D [Settings...] A Copy Enables you to copy the schedule displayed in the calendar section. Schedule B Paste Pastes the schedule copied using [Copy Schedule]A to the selected camera. Schedule C Copy and Pastes the schedule displayed in the Paste to All calendar section to all cameras. D Close Exits the [Scheduler...] screen.
Basic Operation Recording Camera Images (continued) Settings (R: Factory settings) Item Preset Values A Speedup Settings ^ Frame Rate Description Enables you to specify the frame rate to acquire from the camera. This is the frame rate during speedup recording. Specify the frame rates such that the total rate of all cameras displayed in each view of the [Live Viewing] screen does not exceed 80 ips (image per second) for VR-N1600U/E, 160 ips for VR-N1600U/E(A) , and 60 ips for VR-N900U.
Item Preset Values Description ERecording Settings (continued) Enable speedup On motion On event Enables you to specify whether to execute recording with a higher maximum frame rate when motion is detected or when an event occurs. When [On event] is selected : Specify the starting and ending events in the [Start] and [Stop] fields respectively. The speedup recording frame rate uses the [Frame Rate] in the [Speedup Settings] A item.
Basic Operation Recording Camera Images (continued) Settings (continued) Item Preset Values H Exclude Regions Settings ^ Description Enables you to specify the regions to exclude from motion detection. (A Page 104) Exclude Regions... Not used. Region Color... I PTZ Preset Positions... ^ Enables you to specify preset positions and patrolling. When a configurable camera is selected, this button is displayed to the right of the [Outputs...] button. J Outputs...
Memo : Specifying Audio Recording Settings 1 Select [Camera Record Setting] from the main menu ● The [Camera Recording Administator] screen appears. ● The audio sound is recorded in the database of the camera image specified in the [Target Database] item C. ● Audio sound is recorded throughout the interval when the scheduler of the camera specified in the [Target Database] item C is in the online mode.
Basic Operation Recording Camera Images (continued) Renaming Cameras and Assigning Camera Numbers 1 Select a camera name and right-click on it, followed by clicking [Edit] ● The Camera Name and Number editing screen appears. Screen Setup Screen Display (Groups and Views) Multi-view setting for multiple cameras is referred to as [Views]. All views are placed in folders called [Groups]. Memo : ● [Groups] can be private or shared.
䡵 Creating [Views] within a Group 1 Select the group in which you want to create a Creating Groups and Views 䡵 Creating a Group new view 1 Select [Screen Setup] from the main menu ● If the [Live] or [Browse] screen is displayed, you can also click on the [Setup] tab using the mouse.
Basic Operation Screen Setup (continued) 2 Click the [Rename] button Creating Groups and Views (continued) 3 Enter a name for the new view [Rename] Button 3 Overwrite the existing group or view name with a new name ● Next, add cameras to the view. (A Page 63 [Adding Cameras to a View]) 䡵 Renaming a Group/View 1 Select the group or view that you want to rename in the Views section. 䡵 Deleting a Group or View 1 Select the group(s) or view(s) that you want to Select delete from the Views section.
Adding Cameras to a View Adjusting Camera Settings 1 Select a view 1 Select the camera you want to adjust on the ● The layout of the selected view appears. 2 Click the [+] mark to the left of [Server] under [Screen Setup] screen 2 Select [Properties] [System Overview] ● A list of available cameras appears.
Basic Operation Screen Setup (continued) Using Your Views on Different Computers User settings, including the [Private] view, are stored on this unit. In other words, you can use your [Private] views on any surveillance computer that has this unit and the ANVR ViewerB installed (A Page 123) by logging in with your own user name and password. Adjusting Camera Settings (continued) 1 Double-click the [Setup] tab on the NVR Viewer.
2 Click and drag the [Carousel] icon in the [System Overview] section to the position that you want to set in the view [NVR]Camera1 [NVR] Camera2 A B C [NVR] Camera3 [NVR] Camera3 [NVR] Camera4 [NVR] Camera4 Item A Image 3 Release the mouse button at the position Quality B Frame Rate C Maintain [NVR] Camera2 Image Aspect Ration Description Enables you to adjust the image resolution and picture quality during viewing. Select AFullB at all times. This is the viewing frame rate.
Basic Operation Screen Setup (continued) Adding Hot Spots (Enlarged Images) The selected camera within the view is displayed in the hot spot designated position. Setting the hot spot in a larger position, such as in [1] of the [1+7] view, displays an enlarged image when the hot spot is selected.
Using the [Html Page] Using Still Images (GIF/JPEG files, etc.) 1 Click [Html Page] under [System Overview] 1 Click [Image] under [System Overview] [Screen Setup] Screen [Screen Setup] Screen [Image] [Html Page] 2 Drag and drop at the required position using the mouse. 2 Drag and drop at the required position using the mouse. ● The [Open] screen appears. The [Open URL] screen appears.
Applications Main Menu List List of Menu Screens (A Page 69) (A Page 72) (A Page 111) (A Page 116) (A Page 115) (A Page 73) (A Page 117) (A Page 60) (A Page 36) (A Page 129) T VR-N1600U/E only (A Page 80) (A Page 76) (A Page 85) 68 (A Page 83)
Unit Setting 1 Unit Setting 1 enables you to specify settings related to this unit, including account configuration, error recovery, and serial port configuration. A J B C I D E F H G Item Preset Values A Password Description Enables you to specify the login password for this unit. Reference Page A Page 31 Note : ● Specify the password using numeric characters only. Current Password ^ To change to a new password, enter the [Current Password]. New Password ^ Enter a new password.
Applications Main Menu List (continued) Unit Setting 1 (continued) Item Preset Values C Error Report Description Enables you to select how you want to be notified when an error is detected in the system. Dialog ● Select check box Do not select check box Select [Dialog] to display a warning dialog on the screen. Mail ● Select check box Do not select check box Select [Mail] to receive an e-mail notification on any abnormality at the preset e-mail address.
Item Preset Values G Serial(VR-N900U) Speed Speed 1800 2400 4800 Description Reference Page Lets you specify the settings for the serial ports controlling the cameras. Please refer to the [Instruction Manual] of the camera in use to configure the parameters correctly for all settings. ^ Lets you select the encoding mode for converting analog image data into digital data. You can choose from the following three modes.
Applications Main Menu List (continued) Unit Setting 2 A B C D Item Preset Values Description Reference Page A HDD meter Display at startup Select check box Select this check box to display the HDD meter when the A Page 133 ● Do not select check box system starts up. ● For details on HDD meter, refer to [HDD Meter] (A Page 133).
OS Setting Enables you to specify settings related to the OS, including network, time, and volume settings. You may need to reboot your computer depending on the settings. B A C D E F 䡵 Network Adapter This section enables you to specify settings such as the IP address of this unit. The camera network and Intranet of this unit are configured with a different IP address. The default address for the camera network is (192.168.0.253), and that for the Intranet is (192.168.1.253).
Applications Main Menu List (continued) OS Setting (continued) 䢇 When specifying LAN2 (Intranet) settings Item ANetwork adapter interface name (continued) Preset Values Description VR-1600/VR-N900: Intel姠8225xER PCI Adapter VR-N1600U/E(A): Realtek RTL8168C(P)/ 8111C(P) PCI-E Gigabit Ethernet NIC#2 Obtain an IP address automatically Select check box ● Do not select check box IP address ● 192.168.1.253 Subnet Mask ● 255.255.255.0 Default Gateway ● 192.168.1.254 Perferred DNS Server ● 0.0.0.
䢇 Other Settings Item Preset Values B Day and Time Properties Automatically synchronize with an Internet server Server Description To synchronize the time with the Internet time server or to specify the date and time manually, click [Update Now]. Select check box ● Do not select check box ^ Select this check box to synchronize the time with the Internet time server. Note : ● You cannot specify the date and time manually when this box is selected. The settings in the boxes cannot be changed.
Applications Main Menu List (continued) Image Server Setting This section enables you to specify settings for connecting this unit to a computer, and for displaying the [Live] and [Browse] screens. The distribution settings are also applied to operation on the [Live], [Browse], and [Screen Setup] screens of this unit.
Item Preset Values A Server Configuration Description Enables you to specify the server name, port number, and details on external access to the server. Name ● Server For specifying the server name. Port ● 80 For specifying the port number to use for the server. Enable Outside IP Address Select check box ● Do not select check box Select this check box to enable access to this unit from a surveillance computer connected to the Internet via the router or firewall.
Applications Main Menu List (continued) Image Server Setting (continued) Item Preset Values Description B User Administration (continued) User Setup... (continued) Add Windows User... ^ Do not select this option. For details, consult your system administrator. Note : ● When the host name in the OS settings is changed, enter [Administrator] in [Enter the object names to select] on the [Serect Users or Groups] screen, and click the [Advanced...] button. Next, click the [OK] button.
Item Preset Values D Log Files Days to log Description Log information may be required for diagnosing troubles. ● 10 For specifying the number of days for storing the event log in the [Image Server Setting]. E Audit Log Enables you to configure log file settings related to client computer users. Enable Audit Logging Select check box ● Do not select check box Days to log ● 30 For specifying the number of days for storing the audit log files.
Applications Main Menu List (continued) Auto Detect Setting This section enables you to assign an IP address to each camera and configure various auto detect settings. For procedures on using the Auto Detect feature, refer to [Auto Detect Settings] (A Page 113). A E B C F D G T VR-N900U only Item A IP Lease Preset Values 䢇 Enable Disable Description For configuring the function to assign IP addresses to each network camera.
B IP Lease Parameter ^ Start Address ● 192.168.0.100 For specifying the first IP address to be assigned to the cameras. Unit ● 20Units 1Unit to 99Units For selecting the number of IP addresses to be assigned to the cameras. The selected number of IP addresses will be assigned starting from the first IP address. Subnet Mask ● 255.255.255.0 For specifying the subnet mask for the cameras. Gateway ● 192.168.0.254 For specifying the gateway for the cameras. Primary ● 192.168.0.
Applications Main Menu List (continued) Note : ● When the ADo not detect in the future.B check box on the [Detect Device] screen is selected during automatic detection, the [Detect Device] screen of the said camera will not appear during subsequent automatic detection operations. You can add the camera manually to enable its detection again.
Camera Record Setting I A J B K C L D M E N F O G P Q H Memo : ● If you are configuring the [PTZ Preset Positions...] settings from the [Settings...] button M, do so after stopping the recording server temporarily using this menu.
Applications Main Menu List (continued) Item Description Reference Page A Service Manager... Pressing the [Service Manager...] button opens a small [Service Manager] screen, which enables you to pause/resume the ARecording ServerA recording program. Use this feature when you need to pause the program, such as when configuring PTZ cameras. A Page 90 B Scheduler... Displays the [Scheduler...] screen. A Page 53 C General Settings... Displays the [General Settings] screen.
Optional Installation This section enables you to install camera drivers and additional softwares. A B C Item A Information on additional softwares Description Insert the flash memory device with the additional software saved in the root folder and select Optional Installation. The additional software will appear in the list. B Install Select the additional software and click [Install]. The installer starts up and the software is installed. C Close Closes the [Optional Installation] window .
Applications Adding Cameras Note : ● The Ahttp port 80B followed by AFTP port 21B are used by default. To use a different port, click [Port Setup] and specify the required port numbers. You may need to specify a different port if the device is located behind a NAT router or firewall. In this case, configure the router or firewall so that it maps the ports and IP address used by the device.
Editing Device Settings ● The following items can be specified. Item Description A Identify Video Device This section describe the procedures to edit the settings of added devices. 1 Select [Camera Record Setting] from the main menu ● The [Camera Recording Administator] screen appears. Device Type For selecting the type of device from the list. Detect Device Click this button to enable automatic detection of the device type and serial number. Device Name Name used to identify the device.
Applications PTZ Camera Settings (COM1/COM2) The [Camera Settings] screen enables you to specify of the information on cameras. The number of configurable parameters available on the [Camera Settings] screen may be limited if the camera does not come with the PTZ features or if the device connected to the network encoder (IP video server) is not a camera. To display the [Camera Settings] screen, click the [Camera Settings...] button on the [Edit device settings] screen.
E Camera Type For specifying whether the camera corresponding to the selected number is [Fixed] or [Moveable]. Fixed : Fixed Camera Moveable : PTZ Camera F Device Port This option is enabled only if AMoveableB is selected in the [Camera Type] item E. For specifying which control port on the network encoder (IP video server) to use for controlling the PTZ features. G Port Addr. This option is enabled only if AMoveableB is selected in the [Camera Type] item E.
Applications Defining a Preset PTZ Position Display the [PTZ Preset Positions for Device Name] Window The [PTZ Preset Positions for Device Name] window lets you define preset positions for the PTZ cameras. 1 Select [Camera Record Setting] from the main Stopping the Recording Server Stop the recording server before defining the PTZ camera settings. 1 Select [Camera Record Setting] from the main menu 2 Select a camera from [Device Manager] and click [Settings...
3 Click the [PTZ Preset Positions...] button ● The [PTZ Preset Positions for Device Name] window appears. ● The following configuration options are available in the [PTZ Preset Positions for Device Name] window. Item A PTZ View For moving the PTZ camera to the desired position. You can check the position on the screen. B Preset For registering, deleting and testing a PTZ camera position.
Applications Defining a Preset PTZ Position (continued) Moving to Preset Positions by Events This feature enables the PTZ camera to move automatically to a preset position when an event occurs. 1 Display the [PTZ Preset Positions for Device Name] window (A Page 90) Defining a Preset Position 1 Display the [PTZ Preset Positions for Device Name] window (A Page 90) 2 Select the [Goto preset on event] check box under [Preset Position on Events] 3 Click the [Setup...
Item Auto PTZ Patrolling Description PTZ patrolling is a feature that enables automatic movement of a PTZ camera between several preset positions. A New For adding a new patrol scheme to the [Patrol scheme] list. 1 Display the [PTZ Preset Positions for Device B Copy For creating a new patrol scheme based on an existing one. Select the patrol scheme to copy in the [Patrol scheme] list beforehand. C Rename For changing the name of an existing patrol scheme.
Applications Defining a Preset PTZ Position (continued) 䡵 PTZ Patrolling Actions Upon Detection of Motion 1 Select the [Disable patrolling schedule if motion is detected] check box Auto PTZ Patrolling (continued) 䡵 Specifying Patrol Timing 1 Select the patrol scheme that you want to define from the [Patrol scheme] list 2 Specify the duration (seconds) for the PTZ camera to stop at each preset position in the [Stay at each position in the patrol schedule(in seconds)] field 3 Specify the time required
Camera Input/Output Port and Events The input/output port is the input/output terminal that is found on each device registered with this unit. You can register the input port as [Input events], and the output port as [Outputs...]. A registered input/output port can be linked to an event as described below. (A Page 102 [Specifying an Output Port]) ● Events can be used to start recording, send e-mails, move the PTZ camera to a preset position, and control the output port of the device.
Applications 3 Select the required event from the [Available Camera Input/Output Port and Events (continued) Input Event(S)] list and click the add the event button to Specify the event name and e-mail settings on the [Add New Event] screen.
Input/Output Terminal on Rear Panel ● The audio input acts as a network device in the VR-N1600U/E system, and the device name assigned to it is ANVRB. The input/ output terminals on the rear panel have been assigned to the ANVRB device by default. (VR-N1600U/E) ● In VR-N900U, analog input circuitry is considered as a network encoder (IP video server), and the device name assigned to it is AN900B. The input/output terminals on the rear panel have been assigned to the AN900B device by default.
Applications Camera Input/Output Port and Events (continued) Note : ● The [Add new output event...] button is disabled if there is no output available for use by the network camera. [Advanced] Screen The [Advanced] screen enables you to specify network settings for handling events. Specifying an Output 1 Select the camera for specifying the event from the [Defined events] list on the [I/O Setup] screen 2 Click the [Add new output event...] button 1 Click the [Advanced...
Item Description D Polling For some devices, the surveillance system Frequenc may need to check the status of their input y[1/10sec] ports in order to detect whether input has been received. These regular status checks are called ApollingB. The [Polling Frequency[1/10sec]] field enables you to specify the interval between status checks. Specify the interval in units of 1/10 seconds. 2 Select [Global] (apply to all cameras) or a specific camera 3 Click [Add new event...
Applications Camera Input/Output Port and Events (continued) 2 Select Generic and click [Add new event...] A B Specifying Generic Events What is a generic event? This is a function that uses TCP or UDP protocol communication as an input event for this unit. When character strings in the communication data received by the unit matches the predetermined conditions, the corresponding generic event is triggered.
B Notification settings Item Description Send e-mail if this event occurs Select this check box to send an e-mail alert when an event occurs. Include image from camera Select this check box to attach the currently recorded images to the e-mail when the input event is triggered. Select a camera from the list below the check box. C Event rules string Item Description Event substring For specifying the expression to search for during data analysis by this unit.
Applications Camera Input/Output Port and Events (continued) 5 Repeat 2 to 4 for each event ● To delete an event for which notification has been configured, select the event and click the [ ] button. Specifying an Output Port Event Notification Settings When a specific event occurs, this can be indicated using yellow color in the title bar area at the top of the live image display screen.
䡵 Specifying Output via Motion Detection Camera Output Settings You can assign external outputs specified on the [I/O Setup] screen to a camera, such as sounding of a siren or switching on of lights. ● The assigned outputs can be triggered automatically when motion is detected, or manually by pressing the output buttons. ● You can display the [Output Settings] screen by clicking the [Outputs...] button on the [Camera Recording Administator] screen (A Page 55).
Applications 䡵 Setting Buttons and Check Boxes Motion Settings Item Note : ● Before configuring the motion detection settings, it is recommended that you complete the settings related to image resolution, compression, and motion detection exclusion areas. Otherwise, you may need to adjust the sensitivity level in the motion detection settings again when you change the picture quality and set the exclusion areas at a later date.
Specifying Motion Detection Motion detection enables you to specify the timing to transfer images from the camera, generate alerts, and trigger external outputs (lights or sirens). Note : ● This feature is essential to the system’s operation. In order to avoid unnecessary alerts during application, it is recommended that you specify the settings for each camera carefully.
Applications General Settings Item Description E Advanced Use [Camera Record Setting]-[General Settings] to specify general settings related to the system, such as e-mails. Don't send email on camera failures Select this check box to stop sending e-mail alerts if a camera is no longer in the online mode. Start cameras on remote live requests You are able to view live images from cameras even when they are in the offline mode.
Item E-mail Settings Description A Enable E- Select this check box to enable sending of mail(Monitor) e-mail alerts. A B Recipient(S) For specifying the e-mail addresses to send alerts to. If you are specifying more than one e-mail address, separate the email addresses using semicolons. C Sender For specifying the sender’s e-mail address, outgoing (SMTP) mail server name and login settings. B Settings D Subject text C E Message text For specifying the message text. F Time btw.
Applications 䡵 Setting Items and Buttons Archiving Item A Enable Archiving Description This function is not available. The check box is selected at all times. B Delet databases For specifying the number of days you With the archiving feature, you can store recorded images up to the maximum available capacity of the hard disk. By default, recorded images received from cameras are stored in the database for each camera, and data is automatically archived when the database is full.
䡵 Setting Items and Buttons Item Description J Time to add For specifying the archiving time. Add Adds the archiving time specified in the [Time to add] field to the [[Daily archiving times] K list. Delete Removes a selected archiving time from the list. K Daily archiving times Precautions when Changing NAS Archive Settings When NAS is specified as the archive destination, the path that is displayed on the “Select Directory” screen may not coincide with the preset value.
Applications Database Settings Item D In case of This section enables you to specify the database settings. Select a camera from [Main Menu]-[Camera Record Setting][Device Manager], and select -[Settings...]. Memo : ● Recorded image data is referred to as the database in this manual. The recorded images are saved as database. database failure the following action syould be taken Description For selecting the action to take when problems are found in the database.
Flash Memory Utility 䡵 Save Setting Date The following are procedures to save the preset data in the flash memory device. 1 Insert the flash memory device into the [SERIAL] terminal on the front (rear) panel 2 Select [Save Setting Date] You can save set values to flash memory devices or retrieve data from them. 1 Select [Flash Memory Utility] from the main menu ● The [Flash Memory Utility] screen appears. ● A [Save Setting Data?] confirmation message appears.
Applications Flash Memory Utility (continued) 䡵 Removing the Flash Memory Device 1 Select [Remove Flash Memory] ● The [Remove Flash Memory?] confirmation dialog appears. Press [OK]. 䡵 Reading Preset Data This section describes procedures for reading the preset data from the flash memory.
3 Specify the following items under [IP Lease Auto Detect Settings Parameter] Item Description Start Address For specifying the first IP address to be assigned to the cameras. Unit For selecting the number of IP addresses to be assigned to the cameras. The selected number of IP addresses will be assigned starting from the first IP address. Specifying IP Lease Subnet Mask For configuring the function to assign IP addresses to each network camera. For specifying the subnet mask for the cameras.
Applications 3 Configure the analog input (VR-N900U) Auto Detect Settings (continued) ● For specifying the number of channels and format of the analog input to be used. Note : Using the Auto Detect Feature The Auto Detect feature enables automatic detection of network cameras. Memo : ● When multicast packets are configured such that they do not pass through the network equipment, such as a switching hub, the Auto Detect of the camera may not function properly.
Language Setting This option enables you to specify the language you want to use. Memo : ● The functions and GUI (graphical user interface) are the same as the [Selecting a Language] (A Page 23) screen that is displayed when this unit is first switched on. 1 Exit NVR Viewer 2 Select [Language Setting] from the main menu ● The [Language Setting] screen appears when the NVR Viewer is switched on for the first time.
Applications HDD Utility Item B Defrag Executes the defragmentation function to eliminate fragmented files in the volume selected in the [Volume] field. The defragmentation process may take several hours depending on the status of the hard disk. If defragmentation cannot be executed for some reasons, a message indicating that ADefrag cannot be performed now.B appears. Press [Close] to close the dialog.
Item E Details Description Restoring Default Settings Click this option to display the [Advanced] screen. You can specify the settings when archiving to NAS or the built-in HDD on this screen. NAS User Settings User name For specifying the user name for connecting to NAS. Password For specifying the password for connecting to NAS. NAS Drive Add Enter the IP address of the NAS to be connected to the [Address], and click the [Add] button. Example) 192.168.0.
Applications Distribution Settings (Details) User Administration This section describes procedures to configure user accounts and rights. 䡵 User Settings After the [User Administration] screen appears, you are able to define individual users and their passwords. There are two ways to add new users. vr-n1600 Note : ● Do not select this option. For details, consult your system administrator.
3 Select the user for which user right is to be specified from the [User] list 7 Select the functions for each of the cameras that have been moved to [Viewable by selected user] ● Select the functions from the list of options below. All options are selected by default. Item 3 4 6 5 7 Live cameras) in the [Global User Rights] list Item Description Enables you to view live images from the selected camera. PTZ Enables you to control the PTZ camera using the NVR Viewer.
Applications Distribution Settings (Details) (continued) Master/Slave Settings This section enables you to add/delete NVR units as the slave server. To use an NVR unit as the master server, you need to select the [Designate as Master Server] check box and register slave servers using the steps below.
Connecting to a Computer 1 Click the [Start] button, followed by clicking [Control Panel] The following operations are possible when you connect this unit to a computer. ● Viewing live images on the computer ● Controlling network cameras on the computer ● Viewing recorded images on the computer Note : ● Connect the computer to the LAN2 terminal network. ● Settings for cameras connected to the LAN1 network cannot be specified from a computer connected to the LAN2 network.
Applications Connecting to a Computer (continued) 10 Set [Default gateway] to 192.168.1.254 3 Select the network to which NVR is connected 11 Click the [OK] button 12 Click the [OK] button on the [Local Area Connections Proparties] screen 4 Right-click and select [Properties] 5 Check to ensure that both the [Cliant for Microsoft Networks] and [Internet Protocol(TCP/ IP)] check boxes are selected Note : ● Do not use the same IP address in the same network environment.
3 Click the [Run] button Install the NVR Viewer on the Computer Note : ● Before installing, check to ensure that Microsoft. NET Framework 2.0, DirectX 9.0 or later versions, and Microsoft Internet Explorer 6.0 or later versions are already installed on the computer. If any of these are not installed, installation of the NVR Viewer may fail. 1 Open the Internet Explorer browser (6.0 or later Doing so starts up the NVR Viewer Setup Wizard. NVR_Viewer [1].
Applications Connecting to a Computer (continued) Login to the NVR Viewer 1 Double-click the NVR Viewer shortcut on the desktop ● When using Windows Vista, right-click the icon and select ARun as administratorB to activate NVR Viewer. (In the properties box that appear when the icon is rightclicked, select ACompatibilityB - APrivilege LevelB and check ARun this program as administratorB. This enables you to activate the program by double-clicking.
Login to NVR Viewer (Continued) 2 Specify your login information in the following fields A C E Item Description E Remember Saves the password. If you have selected AWindows authenticationB or ABasic authenticationB for the [Authentication] item B, selecting this check box enables you to login the next time simply by clicking the [Connect] button. password F Auto-login B D F Enables you to login automatically. Select this check box to enable you to login to [NVR Viewer] automatically.
Applications Connecting to a Computer (continued) Exiting/Logging Out of the NVR Viewer [Log Out] Button [⳯] Button Uses of the NVR Viewer For uses of the NVR Viewer, refer to the following pages. 䢇 [Viewing Live Images via Mouse Control] (A Page 36) 䢇 [Playing Back Recorded Images via Mouse Control] (A Page 42) 䢇 [Screen Setup] (A Page 60) 䡵 Logging Out 1 Click the [Log Out] button ● You are logged out and the Login screen of the NVR Viewer appears again.
Audio Transmission Application Control (VR-N1600U/E) Audio sound input (such as from a microphone) to the [AUDIO IN 1] terminal is sent to a camera that supports bidirectional audio, and output to the speakers connected to the camera. Audio Transmission 1 Start up the NVR Viewer to check the live images of the camera ● With the wallpaper or main menu displayed, press the [LIVE/BROWSE] button to start up the NVR Viewer.
Applications Audio Transmission Application Control (VR-N1600U/E) (continued) 5 Press the [Disconnect] button to disconnect the camera Memo : ● Cameras that are not registered in [Camera Record Setting] of the main menu cannot be selected. ● If the audio setting of the camera is set to the half duplex mode, you will not be able to hear audio sound from the camera when in the AConnectB status.
Event Audio Settings (VR-N1600U/E) This feature plays back a specific audio file from the designated destination on the camera or this unit when a generic event registered with this unit is triggered or when alarm signals are input to the rear terminal. The Event Audio Settings screen enables you to configure the above setting as well as other settings related to the event audio feature. 1 Select [Event Audio Setting] from [Main Menu] ● The [Event Audio Setting] screen appears.
Applications Event Audio Settings (VR-N1600U/E) (continued) Item Description C Recording For entering the file name when you perform recording using the microphone connected to this unit. The [Recording (Stop)] button I is enabled once you have entered a file name. file neme D Audio Audio Copying This feature enables you to copy (register with this unit), delete, perform test play, and record audio files used on the [Event Audio Setting] screen. Format supported is G711 μ-law monaural sound.
Setting Copy Password This feature copies the settings of event audio associated with an event (audio file name, destination of transmitted audio file, number of deliveries) to another event. Enter the password to establish connection with the camera that supports bidirectional audio. Audio transmission to the camera that supports bidirectional audio will not be executed if the password entered is incorrect.
Applications Event Audio Settings (VR-N1600U/E) (continued) Communication Settings To make use of the event audio feature, you need to receive the communication data for triggering the generic event issued by an external device using the event audio program, and transfer it to the alert port of this unit. You can enter the port number and alert port number (A Page 102) for receiving communication data for triggering the generic event on the [Communication setting] screen.
HDD Meter Item A Update interval Preset Values 10 For specifying the time interval seconds (seconds) for updating. (Range of 10 to 300 seconds) B Transparency 0 % For specifying the transparency of the HDD meter. (Range of 0 to 90 %) C Select drives OFF Displays the built-in hard disk drive and external USB hard disk drive in a list. Select the check box of the hard disk drive to monitor. Each drive is used for its respective purpose as below.
Applications 6 Press [Copy extension MIB onto the flash Setting SNMP memory] in the [SNMP setting] section ● The MIB extension information is copied to a flash memory device. 3 4 5 When SNMP is enabled, the status of this unit can be monitored from the SNMP manager of the surveillance computer. The MIB extension information (JVCNVRMIB.txt) must be registered to the SNMP manager.
䡵 List of Status that can be Obtained from this Unit iso(1) - org(3) - dod(6) - internet(1) - private(4) - enterprises(1) - jvc(718) - nvr(916) - nvrObjects(1) Group Identifier Name 1 nvrRecStatus 2 nvrRecMode 3 4 nvrLastAlarmDate nvrCpuUsage 5 nvrDdriveWrite 6 nvrRunViewer 1 nvrWarningTable 1.1 nvrWarningEntry 1.1.1 nvrWarningIndex SYNTAX INTEGER { off(0), on(1) } INTEGER { off(0), recCtrl(1), recAll(2) } DateAndTime INTEGER(0..100) INTEGER(0..
Others Compatible Equipment Connecting a UPS Connecting an uninterruptible power supply (UPS) to the hard disk will protect it from damage by automatically shutting down all operations prior to switching off the power supply in the event of a power failure. Make sure that peripheral devices are used in accordance with their operating environment.
4 Switch on the power of this unit ● If recording is in progress, a [New HDD was found. Are you OK to stop recording and format new HDD?] confirmation message appears. ● Upon clicking [OK], a multipartition confirmation screen appears. (Only when the VR-D series is used) Note : ● Consult your nearest JVC dealer or service center for details on the type of external hard disk drive that can be used.
Others Special Key Operations Pressing a Button for Two Seconds or Longer 䡵 [REC CONTROL] Turns on/off the recording control mode. [Selecting the Recording Control Mode] (A Page 53) Combining a Button with the [FUNCTION] Button 䡵 [FUNCTION] + [REC CONTROL] Displays the main menu. (A Page 32 [Opening the Main Menu]) 䡵 [FUNCTION] + [LIVE/BROWSE](VR-N1600U/E) [FUNCTION] + [ALARM CLEAR] + [SELECT](VR-N900U) Reboots the NVR Viewer internal distribution server.
Recording Before/After Occurrence of Event or Motion You can record images before and after the occurrence of an event or motion when recording in the recording control mode (A Page 53). Motion or event Stopped Records for set time before Set time Stopped Records for set time after Set time PTZ Camera Control Connecting the PTZ camera to the COM port of the network encoder (VN-E4) enables the PTZ control on the live screen of the NVR Viewer.
Others PTZ Camera Control (continued) 䡵 Menu : Displays the PTZ camera menu : Selects the PTZ camera menu : PTZ camera’s menu (Up cursor) 䡵 Pan/Tilt : PTZ camera’s menu (Down cursor) : Tilts the camera upwards : PTZ camera’s menu (Right cursor) : Tilts the camera downwards : PTZ camera’s menu (Left cursor) : Pans the camera to the right 䡵 Exit Exits PTZ camera control : Pans the camera to the left 䡵 Zoom : Zooms out Memo : ● You can use the [SKIP] buttons to change the item to control.
Display and Saving of Maintenance Information This section describes procedures for displaying various information. 1 Press and hold the [FUNCTION] button, and press the [6/HOME](5/HOME) keypad button at the same time` ● The [Maintenance Information] screen appears. A B T VR-N1600U/E only C Item Description A Power Failure The power failure history appears. The History [Power Failure History] is empty if no power failure has occurred in the past.
Others Export Viewer You can view data exported to a USB memory device, CD-R/RW, or DVD/R-RW on the computer. Doubleclick Starting the Export Viewer 1 Insert the USB memory device containing the exported data into the USB port of the computer ● The USB memory device is automatically recognized by the computer as a removable disk. 2 Go to the Start menu, and select [Windows Explorer] in [All Programs]-[Accessories] ● The [Windows Explorer] appears.
Viewing Exported Data Data Playback/Stopping Data Playback 䡵 Viewing Data on a Specific Date/Time Using Date/Time Selection 䡵 Playback 1 Click the [K] button for date selection ● A calendar appears. 1 Set the playback speed using the speed control 2 Click the Play button ● The database is played back at the specified speed. Click Speed Control Calendar 2 Select a specific date from the calendar Play Button ● Image on the selected date appears.
Others Customizing Joystick Settings Item 1 Click the [K] button at the top right corner of the A Invert By default, the PTZ camera moves to the right when you push the joystick to the right along the X-axis, and moves up when you pull the joystick towards you along the Yaxis. The movements are reversed if you select [Invert]. B Absolute By selecting AAbsoluteB, the angle of the joystick corresponds to the direction of the camera. C Action For specifying the action when you move the joystick.
7 Click [Main Menu]-[Camera Record Setting]- Configuring NAS [Archive Setup...] (A Page 108) ● The [Archive Setup] screen appears. 8 Deselect the [Automatic path selection] check box 1 Click [HDD Utility] under [Main Menu] (A Page 116) ● The [HDD Utility] screen appears.
Others Recording Time Schedule (VR-N1600U/E) The actual recording time varies according to the camera settings, input image content, and condition of the hard disk. Use the tables below as a guide to the recording time. ● 16 Channel Recording/No Audio Recording/No Additional HDD [Hour] Picture Quality Settings Image Size VGA Data/Image [kB] 30 ^ ^ ^ ^ ^ ^ ^ ^ 32.0 24.0 20.0 16.0 27.0 15.0 8.0 5.
● 8 Channel Recording/No Audio Recording/No Additional HDD [Hour] Picture Quality Settings Image Size VGA Data/Image [kB] 30 32.0 24.0 20.0 16.0 27.0 15.0 8.0 5.0 QVGA 15 15 21 25 32 19 34 65 104 31 42 51 64 37 68 130 209 Frame rate per channel, per second [ips] 10 5 3 1 46 93 155 470 210 635 63 126 253 766 76 152 192 319 964 96 185 562 56 111 205 341 1030 102 194 389 648 1685 313 626 1044 3138 0.5 964 1293 1557 1952 1147 2084 3925 6299 0.
Others Recording Time Schedule (VN-N900) The actual recording time varies according to the camera settings, input image content, and condition of the hard disk. Use the tables below as a guide to the recording time.
䢇 4 Channel Recording/No Audio Recording/No Additional HDD [Hour] Picture Quality Settings Image Size VGA QVGA Data/Image [kB] 32 24 16 10 27 15 8 30 15 31 42 63 102 37 67 127 62 83 126 203 74 135 254 Frame rate per channel, per second [ips] 10 5 3 1 93 186 310 937 250 417 1257 125 189 378 631 1898 305 609 1015 3051 222 370 1115 111 202 404 673 2026 381 763 1271 3820 0.5 1898 2539 3820 6126 2254 4076 7664 0.2 4781 6382 9586 15352 5671 10226 19195 0.5 1514 1898 2539 3393 1733 2650 3820 4707 0.
Others Default Value List Scheduler [Scheduler Setting] (A Page 53) Online Enable speedup E-mail Patrolling [ ] : Factory Settings [Always Online] [Always Offline] [Always Offline] [Always Offline] Camera Settings [Edit Device...]-[Settings] (A Page 56) PTZ Camera Section Some of the connected cameras are Pna/Tilt/Zoom cameras Camera Type [Not Selected] [Fixed] Camera Settings [Specifying Image Recording Settings] (A Page 55) Speedup Settings Frame Rate Frame/ [8] [Sec.] /Min.
Motion Detection [Specifying Motion Detection] (A Page 105) Sensitivity Motion Sensitivity [40] [640] General Settings [General Settings] (A Page 106) Milestone XProtect Central Settings Enable Milestone XProtect Central Connections [Not Selected] Patrolling Settings Resume Patrol after Manual or Event PTZ(sec.) [30] Logfile Settings Logfile Path Days to log [L:¥Log¥MS] [5] Event Recording Settings Path Days to keep [D:¥Events¥] [5] Advanced...
Others Default Value List (continued) Unit Settings 1 [Unit Setting 1] (A Page 69) Password Auto Logon [None] [Selected] Live Live viewing Auto Start [Selected] Error Report Dialog Mail [Selected] [Selected] Record Control ON at startup [Selected] Mail Server SMTP Server POP Server SMTP Authentication Port[25] Port[110] [NONE]/SMTP Authentication/POP before SMTP Emergency Record Time of Record Encode Mode (VR-N900U) Encode Mode Interpolate Serial (VR-N900U) Speed NONE /30seconds/[60seconds]/5mi
OS Settings [OS Setting] (A Page 73) Network Adapter Interface Name Intel姞 82566DM Gigabit Network: LAN1 (Camera Network) (VR-N1600U/E) Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC: LAN1 (Camera Network) (VR-N1600U/E(A)) Realtek RTL8169/8110 Family Gigabit Ethernet NIC: LAN1 (Camera Network) (VR-N900U) Obtain an IP address automatically [Not Selected] IP address [192.168.0.253] Subnet Mask [255.255.255.0] Default Gateway [0.0.0.0] Perferred DNS Server [0.0.0.0] Alternate DNS Server [0.0.0.
Others Default Value List (continued) Auto Detect Settings [Auto Detect Settings] (A Page 113) IP Lease [Enable] /Disable IP Lease Parameter Start Address Unit Subnet Mask Gateway [192.168.0.100] 1 Unit to/[20Units]/to 99 Units [255.255.255.0] [192.168.0.254] DNS Server Primary Secondry Domain Name [192.168.0.253] [192.168.0.
User Administration (Distribution Settings A Page 118) VR-N1600U/E User vr-n1600 Administrator VR-N900U User vr-n900 Administrator Password [vr-n1600] [None] Type Basic user [Windows or Active Directory user] Password [vr-n900] [None] Type Basic user [Windows or Active Directory user] HDD Utility (Advanced Settings A Page 116) NAS User Settings Password User name [None] [None] Auto Archive Enable archiving to internal HDD [Selected] HDD Meter Option Settings (Advanced Settings A Page 133) Monitor s
Others Troubleshooting Symptom Action Power cannot be turned on. Check to ensure that the power cable has been plugged in correctly. Check to ensure that the power switch on the rear panel is switched on. Camera is not automatically detected. Follow instructions in the camera’s [Instruction Manual] to check the IP address settings. When the IP Lease feature is in use, turn OFF the camera and ON again with this unit started up. Unable to control using [REC] and [PLAY].
Specifications When not viewing live images on NVR : Up to 240 ips/0 ips/80 ips (VR-N1600U/E) : Up to 240 ips/0 ips/160 ips (VR-N1600U/E(A)) (When NVR Viewer is not started up) When using NAS VR-N1600U/E When viewing live images on NVR : Up to 80 ips/80 ips/80 ips (VR-N1600U/E) 䡵 General : Up to 80 ips/160 ips/160 ips (VR-N1600U/E(A)) Allowable Operating Temperature : 5 I to 40 I When not viewing live images on NVR : Up to 80 ips/0 ips/80 ips (VR-N1600U/E) Allowable Storage Temperature : Up to 80 i
Specifications (continued) When using NAS When viewing live images on NVR : Up to 60 ips/60 ips/30 ips When not viewing live images on NVR : Up to 60 ips/0 ips/30 ips 䡵 Attachments/Accessories VR-N900U Start-up Guide ....................................... 1 䡵 General CD-ROM................................................ 1 Allowable Operating Temperature Power Cord (2 m) .................................. 1 : 5 I to 40 I Rack Mount Bracket ..............................
159
NETWORK VIDEO RECORDER VR-N1600U/VR-N1600E/VR-N900U LST0728-001C