TK-C205 INSTRUCTIONS MODE D’EMPLOI INSTRUCCIONES (A) For Customer Use: Enter below the Serial No. which is located on the body. Retain this information for future reference. Model No. ® is a registered trademark owned by Victor Company of Japan, Ltd. is a registered trademark in Japan, the U.S.A., the U.K. and many other countries. © 2004 Victor Company of Japan, Limited ® Printed in Thailand LWT0216-001A-H Serial No.
These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances. IMPORTANT SAFEGUARDS 1. 2. 3. 4. Read all of these instructions. Save these instructions for later use. All warnings on the product and in the operating instructions should be adhered to. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 5.
FOR USA AND CANADA Introduction INFORMATION (FOR CANADA) RENSEIGNEMENT (POUR CANADA) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Introduction E-4 Operating Precautions ● Before starting an important recording, be sure to perform a test recording in order to confirm that a normal recording is possible. ● We do not accept liability for the loss of a recording in the case of it becoming impossible to record due to a problem in the video camera, VCR or video tape.
Introduction Body Surface 6 [AGC - ON/OFF] Auto-gain control switch View when the dome cover is removed. For instructions on removing the dome cover, see step 4 of “Mounting the Camera to the Ceiling”. ( page 11) 4 1 compensation switch 6 9 Setting this switch to “ON” opens the iris even in backlight conditions, making the subject easier to view. (Default setting: OFF) This button is pressed when manually adjusting the white balance or when adjusting the vertical phase of the line lock.
Introduction Installation and connection Names and Operations of Parts (continued) System diagram 2 1 Camera 1 MEMO Power supply necessary for one TK-C205 DC 12V : 300mA AC 24V : 280mA • When the voltage drops due to fluctuations in voltage or compatibility with the power supply cable, the current increases by 30% for each TK-C205. Video signal Power 3 4 Camera 2 Video signal Power Main unit side Camera 3 4 Video signal Power 5 Camera 4 Video signal MONITOR Power DVR, etc.
Installation and connection Mounting the Camera to the Ceiling Be careful of the following items when connecting the cables. • Turn OFF the power supply to all components before making connections. Video signal cables Connect the coaxial cables (BNC) to the video signal output connector (BNC).
Installation and connection 2. Attach to ceiling slab 1. 1. Video signal cable Safety cable 3. Installation Solder or crimp 4. Wrap with tape BNC connector Power supply cable connection Wrap with tape Point the camera in the direction you wish to capture. Point the camera so that the Horizontal Lock screw is facing the direction you wish to capture. The camera can be adjusted ±60° horizontally to either side of the Horizontal Lock screw. 6. Mount the camera to the ceiling.
Installation and connection The MONITOR terminal is used when making various adjustments to the camera at installation. Image inclination (adjustable range: ±15°) Rotation levers IRIS LEVEL Adjusting the iris level Setting switch This adjustment only needs to be made when required.( page 6) Adjustment button 75Ω termination disconnected IRIS LEVEL Volume Manipulate the rotation levers to adjust the inclination of the image.
Others As a general characteristic unique to CCDs, white-spots may appear on the screen with age. In order to reduce this phenomenon, this unit is equipped with a white-spot correction feature. Usage Switch on the camera power supply and wait for at least 30 minutes. 1. Remove the dome cover. 2. Cover the lens surface using a black sheet of paper, etc. so that light does not enter the lens. 3. Press and hold the SPOT CORRECTION button on the unit for more than 2 seconds.