MONITOR DT-V2000SU INSTRUCTIONS For Customer Use: Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference. PHASE Model No. Serial No. LCT0573-001A(6.5J) : : CHROMA BRIGHT A CONTRAST B C ON OFF DT-V2000SU 1 DT-V2000SU MENU 00.12.
Thank you for purchasing this JVC DTV monitor. Before using it, read and follow all instructions carefully to take full advantage of the monitor’s capabilities. SAFETY PRECAUTIONS FCC INFORMATION WARNING : TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS MONITOR TO RAIN OR MOISTURE. CAUTION : To reduce the risk of electric shock, do not remove cover. Refer servicing to qualified service personnel. This monitor is equipped with a 3-blade grounding-type plug to satisfy FCC rule.
CONTENTS SAFETY PRECAUTIONS ............................................................................................... 2 CONTROLS AND FEATURES ....................................................................................... 4 CONNECTIONS ............................................................................................................. 7 HOW TO HANDLE BASIC OPERATIONS ..................................................................... 8 HOW TO PERFORM MAIN MENU ADJUSTMENTS ..........
CONTROLS AND FEATURES FRONT VIEW 2 1 PHASE CHROMA BRIGHT 3 4 A CONTRAST B C ON OFF MENU DT-V2000SU A PHASE CHROMA BRIGHT B VOLUME/ENTER SELECT INPUT SELECT POWER C CONTRAST ON OFF MENU DT-V2000SU VOLUME/ENTER SELECT INPUT SELECT POWER 7 1 Speaker 6 5 5 INPUT SELECT buttons A built-in speaker is located in the right panel when the monitor is viewed from the front. 2 MENU button Displays and turns off the menu screens.
REAR VIEW 8 9 INPUT A 11 INPUT B (RGB/COMPO.) IN 10 (VIDEO) OUT IN Y/C OUT G/Y INPUT A INPUT B (RGB/COMPO.) IN (VIDEO) OUT IN B/PB /B-Y HD/ CS R/PR /R-Y VD REMOTE INPUT C IN/OUT (RGB) AUDIO INPUT EXT SYNC AC INPUT B/PB /B-Y HD/ CS INPUT C R/PR /R-Y VD AUDIO INPUT EXT SYNC 15 AC outlet (120 V AC, 60 Hz) 8 INPUT A (RGB/COMPO.) terminals Input (IN) and output (OUT) terminals for Analog RGB, Y/ R-Y/B-Y component signals.
CONTROLS AND FEATURES (cont’d.) Notes: 11 REMOTE IN/OUT terminal External control input and output terminal. Instead of using the INPUT SELECT button, an external control signal changes the INPUT mode. INPUT mode status data is also output through this terminal. * The terminal is DIN 8-pin (female). [REMOTE IN/OUT terminal specifications] 8 7 6 3 Pin No.
CONNECTIONS Notes: ● Before connecting your system, make sure that all units are turned off. ● The illustration below shows some examples of different connections. Terminal connections may differ depending on the component(s) connected. Be sure to refer to the instructions provided with the unit(s) you are connecting.
HOW TO HANDLE BASIC OPERATIONS BASIC OPERATION 1. Press the POWER turn on the power. ON OFF POWER switch to Selected Input Display (Mode) Display ON (_) : Power turns ON. (Power indicator lights in green.) OFF (—) : Power turns OFF. (Power indicator goes out.) * The frequency of the input Input display signals (or the color system or DTV format) is automatically identified and displayed for about three seconds.
OPERATION OF PICTURE ADJUSTMENT KNOBS PHASE knob Notes: Adjusts picture hue. ● The standard position of each knob is the center point where the knob clicks into place. The standard position is also indicated in the
HOW TO PERFORM MAIN MENU ADJUSTMENTS ADJUSTMENT OF SCREEN SIZE AND SCREEN POSITION • • • • H SIZE: adjusts the horizontal screen size H POSITION: adjusts the horizontal screen position V SIZE: adjusts the vertical screen size V POSITION: adjusts the vertical screen position You can adjust the screen size and screen position. This function can be set when an INPUT A component (COMPO.
• • • • PICTURE DISTORTION ADJUSTMENT You can adjust the picture distortion. This function can be set when an INPUT A component (COMPO.) signal or INPUT B (VIDEO) signal is input with the underscan size (UNDER) selected or when an INPUT A RGB signal or INPUT C PC (RGB) signal is input. 1 Press the MENU button. The screen appears.
HOW TO PERFORM MAIN MENU ADJUSTMENTS (cont’d.) PICTURE ADJUSTMENT You can adjust the picture contrast, brightness, etc. 1 Press the MENU button. MENU The screen appears. <MAIN MENU> SIZE/POSITION ADJ. DISTORTION ADJ. PICTURE ADJ. FUNCTION SELECT STATUS DEGAUSS EXIT: MENU ENTER: + SELECT: screen 2 Press the SELECT button to select the [PICTURE ADJ.] item. The selection mark ( 4) moves to <MAIN MENU> SELECT the [PICTURE ADJ.] item.
FUNCTION SELECTION (SETTING) You can select (set) the display’s functions. 1 Press the MENU button. <MAIN MENU> MENU SIZE/POSITION ADJ. DISTORTION ADJ. PICTURE ADJ. FUNCTION SELECT STATUS DEGAUSS The screen appears. EXIT: MENU ENTER: + SELECT: screen 2 Press the SELECT button to select the [FUNCTION SELECT] item. The selection mark ( 4) moves to <MAIN MENU> SELECT SIZE/POSITION ADJ. DISTORTION ADJ. PICTURE ADJ. FUNCTION SELECT STATUS DEGAUSS the [FUNCTION SELECT] item.
HOW TO PERFORM MAIN MENU ADJUSTMENTS (cont’d.) Connection Between Input Mode Display and Frequency (or Color System or DTV Format) Display DISPLAY OF PRESENT INPUT STATUS You can see the present status of the input mode and frequency (or color system or DTV format). The status display disappears after three seconds. This function is available with all input signals. 1 Press the MENU button. MENU The screen appears.
Recommended Input Mode List Resolution Horizontal Vertical * * * * * * * * DEGAUSSING THE SCREEN Horizontal Frequency (kHz) Vertical Frequency (Hz) Preset NTSC 786 243 15.73 29.97 (i) 480i 720 244 15.73 29.97 (i) 480p 720 483 31.469 59.94 720p 1280 720 44.955 59.94 1080i 1920 540 33.75 30.00 (i) VGA480 640 480 31.47 59.94 VESA600A (S-VGA) 800 600 35.16 56.26 MAC16 832 624 49.41 74.52 VESA768B (S-VGA) 1024 768 56.47 70.
HOW TO PERFORM SET-UP MENU ADJUSTMENTS POWER SAVE FUNCTION SETTING This monitor has a power save function. For example, if the power is turned on with no signal input or the signal input is no longer detected, the power save function puts the monitor into signal-waiting mode (the screen goes out). The power save function is set in the screen.
CONTROL LOCK OF BUTTONS AND KNOBS You can set the CONTROL LOCK function to disable control buttons and knobs on the front panel, except for the power switch. This function is set in the screen. 1 While pressing the SELECT button, press SELECT the VOLUME/ENTER button. 2 Press the SELECT button to select the [CONTROL LOCK] item. The selection mark ( 4) moves to SELECT the [CONTROL LOCK] item.
HOW TO PERFORM SET-UP MENU ADJUSTMENTS (cont’d.) Items WHITE BALANCE ADJUSTMENT Contents BLUE DRIVE Adjusts the blue drive level. … Decreases the blue drive level. … Increases the blue drive level. RED DRIVE Adjusts the red drive level. … Decreases the red drive level. … Increases the red drive level. You can set (adjust) the white balance of the screen. This function (WHITE BALANCE) is set in the screen. 1 While pressing the SELECT button, press SELECT the VOLUME/ENTER button.
SELECTING [ sub menu] IN PROCEDURE 4 You can also adjust items in procedure 5 with only the selected item displayed. Use this if the full menu screen makes it difficult to observe the monitor image. 1 Select the [ sub menu] item in procedure 4. 2 Press the VOLUME/ ENTER button. The screen appears. (A single item is displayed at a time.) 3 Press the SELECT button to select the desired item. 4 Perform adjustment with the VOLUME/ENTER / buttons.
TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solve the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Points to be checked Problems Measures (Remedy) Reference page No power supply Is the power plug loosened or disconnected? Firmly insert the power plug. 5, 6 No picture with the power on Is the signal cable disconnected? Connect the signal cable firmly.
Points to be checked Measures (Remedy) Irregular color Is the monitor placed or moved close to a speaker or any other device incorporating a magnet? Has the position of the monitor been changed with the power on? Move the device away from the monitor. Set the [DEGAUSS] item in the screen to degauss the screen. When degaussing, wait more than 30 minutes for maximum effect.
SPECIFICATIONS Audio Output : 1 W (monaural) Built-In Speaker : 3-1/8” (8 cm) round x 1 Impedance of 8 Environmental Conditions : Operating temperature: 0 – 40 °C (32 – 104 °F) Operating humidity: 20 — 80 % (non-condensing) Power Requirements: 120 V AC, 60 Hz Power Consumption : 1.6 A Dimensions (W x H x D) : 18-3/4” x 16-1/8” x 20-7/8” (476 x 407.5 x 529 mm) Weight : 69.6 lbs (31.6 k˝) Accessory : AC power cord [7.87 ft (2.
DTV-Format Signals * The following are DTV-format signals that can be input. DTV Formats 480i 480p 720p 1080i ITU-R BT. 601-4 SMPTE 293M SMPTE 296M SMPTE 274M 525 525 750 1125 720 x 485 720 x 483 1280 x 720 1920 x 1080 Field Frequency (Hz) 59.94 59.94 60/59.94 60/59.94 Line Frequency (Hz) 15734 31468.5 45000/44955 33750/33716.25 Sampling Frequency (MHz) 54 135 148.5/148.351648 148.5/148.35168 Interlace Ratio 0.5 1 1 0.
DT-V2000SU MONITOR JVC PROFESSIONAL PRODUCTS COMPANY DIVISION OF US JVC CORP. 1700 Valley Road Wayne, N.J. 07470 JVC CANADA INC. 21 Finchdene Square, Scarborough Ontario M1X 1A7 © 1999 VICTOR COMPANY OF JAPAN, LIMITED LCT0573-001A(6.5J) 24 00.12.