English EXA10[A_Ux]-00Cov1.
EXA10[A_Ux].book Page 1 Tuesday, August 30, 2005 3:53 PM Warnings, cautions and others CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION — F button! Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). The F button in any position does not disconnect the mains line. • When the system is on standby, the STANDBY lamp lights red.
EXA10[A_Ux].book Page 2 Tuesday, August 30, 2005 3:53 PM CAUTION — Proper Ventilation To avoid risk of electric shock and fire and to protect from damage, locate the apparatus as follows: Top/Front/Back/Sides: No obstructions should be placed in the areas shown by the dimensions below. Bottom: Place on the level surface. Maintain adequate air path for ventilation by placing on a stand with a height of 10 cm more. In addition, maintain the best possible air circulation.
EXA10[A_Ux].book Page 1 Tuesday, August 30, 2005 3:53 PM Table of contents Introduction Playing back DVDs/CDs Supplied accessories ......................................2 Part description ...............................................3 Basic operations of the DVD player ..............20 DVD player ......................................................... 3 Receiver.............................................................. 4 Using the remote control .................................
EXA10[A_Ux]-TOC.fm Page 2 Thursday, September 1, 2005 10:50 AM Listening to the sound of other audio equipment Listening to the sound of other audio equipment ...................................................41 Timer Timer .............................................................42 Using the sleep timer ........................................ 42 Using the playback timer .................................. 43 Reference Using the AV COMPU LINK function ............45 Connection and setup.............
EXA10[A_Ux].book Page 3 Tuesday, August 30, 2005 3:53 PM Part description The numbers refer to the pages in which the parts are explained. DVD player Front panel See “Display window” shown below. 5 23–26, 28 13, 14 14 20 20, 28 20, 24 Rear panel 45 10 10 47 12 12 10 12 13 Display window The receiver and the DVD player use the same design for their display windows.
EXA10[A_Ux].book Page 4 Tuesday, August 30, 2005 3:53 PM Introduction The numbers refer to the pages in which the parts are explained. Receiver Front panel See “Display window” shown below. 18 5 13, 14 14, 18 16 * 17 18, 20, 41 * This terminal is for connecting a pair of headphones equipped with a stereo plug (not supplied). When the headphones are connected, the speakers do not produce any sound.
EXA10[A_Ux].book Page 5 Tuesday, August 30, 2005 3:53 PM Using the remote control The numbers refer to the pages in which the parts are explained.
Operating the TV using the remote control You can operate your TV using the remote control of this system. Remote control mode selector F TV TV/VIDEO TV CHANNEL TV VOLUME Manufacturer Code Manufacturer Code JVC 01 Samsung 12 Hitachi 10 Sanyo 13 Magnavox 02 Sharp 06 Mitsubishi 03 Sony 07 Panasonic 04, 11 Toshiba 08 Philips 14 Zenith 09 RCA 05 Introduction EXA10[A_Ux]-01.
EXA10[A_Ux].book Page 7 Tuesday, August 30, 2005 3:53 PM Preparation Connections Do not turn on the power until you complete the connection. Standard setup DVD player Speaker Receiver Speaker Connecting the antennas Connecting the AM loop antenna (supplied) 1 Set up the AM loop antenna. 3 Turn the AM loop antenna to find the best position for radio reception. Place the AM loop antenna as far from the receiver as possible.
Connecting the FM antenna (supplied) 7 When radio reception with the supplied FM antenna is poor, or when using a communal antenna FM antenna Antenna cord (not supplied) or Receiver (rear panel) Stretch out the FM antenna to the best position for radio reception, and then fix the FM antenna with adhesive tape. Communal antenna terminal Receiver (rear panel) Converter (not supplied: compatible with 300 C/75 C) Preparation EXA10[A_Ux].
EXA10[A_Ux].book Page 9 Tuesday, August 30, 2005 3:53 PM Connections (continued) Do not turn on the power until you complete the connection. Connecting the speakers There is no difference between the left and right speakers. Speaker terminal Before connecting the speaker cords, twist and pull off the insulation.
Connecting the receiver and the DVD player Make sure to connect the three supplied cords. Preparation EXA10[A_Ux]-02.fm Page 10 Tuesday, October 4, 2005 10:07 AM DVD player (rear panel) Synchronization cord (supplied) Optical digital cord (supplied) CAUTION • Do not fold the optical digital cord as this may damage the inner wire. Audio cord (supplied) If protection caps cover the tips of the optical digital cord, pull off the protection caps before connecting.
EXA10[A_Ux].book Page 11 Tuesday, August 30, 2005 3:53 PM Connections (continued) Do not turn on the power until you complete the connection. Connecting other equipment Connecting other speakers Remote control mode selector To connect speakers other than the ones supplied, follow the operations shown below. 1 2 7 2 /3 (cursor)/ ENTER 3 BASS ADJUST Connect the speakers to the SPEAKERS WOOFER LEFT and RIGHT terminals on the receiver. Hold down BASS ADJUST for 2 or more seconds.
Connecting a TV Connecting other audio equipment Connecting a TV with the VIDEO terminal TV Output Preparation EXA10[A_Ux]-02.
EXA10[A_Ux]-02.fm Page 13 Tuesday, October 4, 2005 10:07 AM Connections (continued) Do not turn on the power until you complete the connection. After connecting the DVD player to the TV, select the video signal type correctly according to the TV. 1 2 3 Slide the remote control mode selector to DVD. Make sure that playback stops. (If a disc is being playedd back, press 7 to stop playback.) Press SCAN MODE. For the locations of the remote control buttons, refer to page 11.
EXA10[A_Ux].book Page 14 Tuesday, August 30, 2005 3:53 PM Basic operations Basic operations DIMMER Remote control mode selector DISPLAY F AUDIO 0 OPEN/ CLOSE FM/AM CC CONVERTER F DVD AUX MUTING AUDIO VOLUME +/ – Turning on/off the system Receiver 1 2 8 • The power of the receiver will turn on and the STANDBY lamp on the receiver will turn off. • Press F AUDIO again to turn off the power of the receiver. • With the power off, pressing any of the following buttons also turns on the receiver.
EXA10[A_Ux]-02.fm Page 15 Tuesday, October 4, 2005 10:08 AM Basic operations (continued) Setting the clock You can set the clock when the receiver is turned either on or off. Example: To set the clock to 10:30 a.m. on Wednesday 1 2 Slide the remote control mode selector to RECEIVER. Press CLOCK/TIMER. Display on the receiver 8 Press SET. • The clock starts from 0 seconds in the minute you set. NOTE • While setting the clock, you can return to the previous step by pressing CANCEL.
EXA10[A_Ux].book Page 16 Tuesday, August 30, 2005 3:53 PM Dimmer Adjusting the volume Changing the brightness of the display windows on the receiver and the DVD player 1 You can set the brightness of the display windows on the receiver and the DVD player respectively. 2 2 Slide the remote control mode selector to RECEIVER or DVD. Press DIMMER repeatedly. Turning off the sound temporarily (MUTING) 1 • Each time you press DIMMER, the setting changes on the receiver/DVD player.
EXA10[A_Ux].book Page 17 Tuesday, August 30, 2005 3:53 PM For the locations of the remote control buttons, refer to page 14. Basic operations (continued) Adjusting the bass sound 1 2 Slide the remote control mode selector to RECEIVER. Press BASS ADJUST. Display on the receiver 3 While the selectable values are flashing, press 2 or 3 (cursor) to select the value of the bass frequency. • You can select “100 Hz”, “120 Hz” or “140 Hz”. • The initial setting is “100 Hz”.
EXA10[A_Ux].book Page 18 Tuesday, August 30, 2005 3:53 PM Listening to radio Selecting a radio station Remote control mode selector This receiver can receive FM and AM radio broadcasts. 1 FM/AM 2 TUNING / / PRESET / / ENTER Slide the remote control mode selector to RECEIVER. Press FM/AM to select “FM” or “AM”. • Pressing FM/AM selects a radio broadcast as the sound source. • You can also use SOURCE SELECT on the receiver to select a radio broadcast as the sound source.
EXA10[A_Ux].book Page 19 Tuesday, August 30, 2005 3:53 PM For the locations of the remote control buttons, refer to page 18. Listening to radio broadcasts (continued) Tuning in to a preset radio station Presetting radio stations in the receiver allows you to easily tune in to a radio station. Presetting radio stations You can store up to 30 FM radio stations and up to 15 AM radio stations. 1 2 Select a radio station you want to store (A “Selecting a radio station” on page 18). Press MEMORY.
EXA10[A_Ux]-03.fm Page 20 Tuesday, October 4, 2005 10:19 AM Basic operations of the DVD player Remote control mode selector 0OPEN/CLOSE DISPLAY Playing back a DVD/CD F AUDIO F DVD DVD FM/AM AUX 3 (play) GROUP/TITLE / PREVIOUS 4 NEXT ¢ SLOW SLOW /¡ 8 MENU/PL 5///2/3 (cursor)/ ENTER ONE TOUCH REPLAY Number buttons /1 7 TOP MENU/PG RETURN 1 2 Slide the remote control mode selector to DVD. Press 0 OPEN/CLOSE. 3 Place a disc. • The disc tray ejects.
EXA10[A_Ux]-04.fm Page 21 Tuesday, October 4, 2005 10:10 AM Basic operations of the DVD player (continued) Slide-show playback This part explains the operation with displays of an MP3 disc as examples. For a JPEG disc, read “track” as “file”. NOTE • When files of different types are recorded on a disc, select the file type to be played back. (A “FILE TYPE ” on page 39) 1 2 Slide the remote control mode selector to DVD. Load a disc.
EXA10[A_Ux].book Page 22 Tuesday, August 30, 2005 3:53 PM ■VCD/SVCD ■MP3/WMA/ASF/DivX/MPEG1/MPEG2 disc When a disc is played back Track number • PBC (Play Back Control) is a signal recorded in a VCD (version 2.0) for controlling playback. You can enjoy interactive software or software with a search function using a menu screen recorded in a PBC compatible VCD. To play back a disc without the PBC function, follow the instructions below.
EXA10[A_Ux]-04.fm Page 23 Thursday, September 1, 2005 10:56 AM Basic operations of the DVD player (continued) Changing the display in the display window ■ASF/DivX/MPEG1/MPEG2 disc Normal display (as shown on page 22) File type/group number/track number Receiver 1 2 Slide the remote control mode selector to RECEIVER. Press DISPLAY repeatedly. • Each time you press DISPLAY, the display toggles between the current source (DVD, FM, AM, AUX-DIGITAL or AUX) and the clock.
EXA10[A_Ux]-04.fm Page 24 Thursday, September 1, 2005 10:58 AM Pausing playback Fast reverse/fast forward search 7 When a disc is played back 1 2 Slide the remote control mode selector to DVD. 7 When a disc is played back 1 Press 8. • To return to normal playback, press 3 (play). Advancing the picture frame by frame Slide the remote control mode selector to DVD. Playing back DVDs/CDs For the locations of the remote control buttons, refer to page 20. There are two methods in step 2.
EXA10[A_Ux]-04.fm Page 25 Tuesday, October 4, 2005 10:09 AM Basic operations of the DVD player (continued) Playing back from a position 10 seconds before (One touch replay) Skipping to the beginning of a chapter/ track/file 7 When a disc is played back 1 2 (PBC off) Slide the remote control mode selector to DVD. Press 7 When a disc is played back ONE TOUCH REPLAY. NOTE • This operation may not be used for some discs. • You cannot go back to the previous title.
EXA10[A_Ux].book Page 26 Tuesday, August 30, 2005 3:53 PM Skipping at about 5 minute intervals You can skip within a file at about 5 minute intervals. This is useful especially when you want to skip within a long file. 7 When a disc is played back 1 2 Resuming playback When playback is stopped in the middle, playback can be started from the stopped position. Temporarily stopping playback 7 When a disc is played back Slide the remote control mode selector to DVD. 1 Press 2 or 3 (cursor).
EXA10[A_Ux]-05.fm Page 27 Tuesday, October 4, 2005 10:11 AM For the locations of the remote control buttons, refer to page 20. Basic operations of the DVD player (continued) Selecting a track from the menu screen 7 When a disc is stopped or played back 1 (PBC off) 7 When a disc is stopped or played back 1 2 2 Slide the remote control mode selector to DVD. Press MENU/PL or TOP MENU/ PG.
EXA10[A_Ux].book Page 28 Tuesday, August 30, 2005 3:53 PM Remote control mode selector F DVD Playing back a DVD/CD in the desired order (Program playback) GROUP/ TITLE / PREVIOUS 3 (play) 4 You can program a maximum of 99 tracks or chapters. The same track or chapter can be programmed more than once.
EXA10[A_Ux]-05.fm Page 29 Tuesday, October 4, 2005 10:11 AM Convenient functions of the DVD player (continued) 3 • Before selecting a bonus group of a DVD AUDIO, cancel the “BONUS” display as explained in “Playing back the bonus group” on page 34. • When you try to enter more than 99 chapters or tracks, “MEMORY FULL” appears. • In the case of a VCD, SVCD or CD, when the total playback time reaches 9 hours 59 minutes 59 seconds, “--:--” will be displayed in the display window on the DVD player.
EXA10[A_Ux]-05.fm Page 30 Thursday, September 1, 2005 11:01 AM Playing back a DVD/CD in a random order (Random playback) Playing back a DVD/CD repeatedly (Repeat playback) 7 When a disc is stopped 1 2 3 Slide the remote control mode selector to DVD. Press PLAY MODE repeatedly to display “RANDOM” in the display window on the DVD player. • “RANDOM” will also be displayed on the TV screen. Press 3 (play). • The same chapter or track will not be played back twice.
EXA10[A_Ux]-05.fm Page 31 Thursday, September 1, 2005 11:02 AM Convenient functions of the DVD player (continued) Playing back a specified part repeatedly (A-B repeat playback) (PBC off) Slide the remote control mode selector to DVD. You can save the settings for program playback, random playback or repeat playback so that the settings are activated even after the DVD player is turned off and then on again.
EXA10[A_Ux].book Page 32 Tuesday, August 30, 2005 3:53 PM Selecting the subtitles (only for moving image) This part explains the operation with displays of a DVD VIDEO as examples. You can use discs of other types in almost the same manner. 7 When a disc contains subtitles and is played back 1 2 1 2 Press ENTER. • The subtitle language setting will change automatically in a few seconds even if ENTER is not pressed. NOTE • You can use this function with the menu bar (A page 36).
EXA10[A_Ux]-05.fm Page 33 Tuesday, October 4, 2005 10:10 AM Convenient functions of the DVD player (continued) Selecting the view angle Magnifying the picture (ZOOM) (only for moving image) 7 When a scene containing multi-view angles is played back 1 2 Slide the remote control mode selector to DVD. (only for moving image) 7 When a disc is played back or paused 1 Press ANGLE. Example: TV screen 2 Slide the remote control mode selector to DVD. Press ZOOM.
EXA10[A_Ux].book Page 34 Tuesday, August 30, 2005 3:53 PM Adjusting the picture quality (VFP) 7 When a disc is played back or paused 1 2 NOTE • If no operation is made for several seconds during the procedure, the settings made so far will be automatically stored. • “VFP” stands for “Video Fine Processor”. Playing back the bonus group Slide the remote control mode selector to DVD. Press VFP. There are some DVD AUDIOs with a special group, called “bonus group”, recorded.
EXA10[A_Ux].book Page 35 Tuesday, August 30, 2005 3:53 PM Convenient functions of the DVD player (continued) Browsable still pictures (B.S.P.) Some DVD AUDIOs may have pictures called B.S.P. (Browsable Still Pictures). The pictures can be viewed as if you are turning pages. NOTE • You can use this function when “B.S.P.” lights up in the display window on the DVD player. 2 Slide the remote control mode selector to DVD. Press PAGE. • Each time you press the button, the still picture will be changed.
EXA10[A_Ux]-05.fm Page 36 Thursday, September 1, 2005 11:05 AM Using the status bar and the menu bar 7 When a disc is played back 1 2 Slide the remote control mode selector to DVD. Press ON SCREEN twice. • “ON SCREEN” will appear in the display window on the DVD player. The status bar and the menu bar will appear on the TV screen.
EXA10[A_Ux].book Page 37 Tuesday, August 30, 2005 3:53 PM For the locations of the remote control buttons, refer to page 28. Convenient functions of the DVD player (continued) Function list Designating the time (Time search) For functions with no description of the operation, press 5// (cursor) to select and press ENTER to determine the function. 7 When a disc is played back Changes the time information in the display window on the DVD player and the status bar.
EXA10[A_Ux].book Page 38 Tuesday, August 30, 2005 3:53 PM Basic operations Remote control mode selector 7 When a disc is stopped or no disc is loaded (“NO DISC” is displayed) 1 2 Slide the remote control mode selector to DVD. Press SET UP. • The following screen will be displayed on the TV. Playing back DVDs/CDs Changing the initial settings with the preference screen 5///2/3 (cursor)/ ENTER SET UP Number buttons • Proceed with operations by following the description on the TV screen.
EXA10[A_Ux]-05.fm Page 39 Thursday, September 1, 2005 11:31 AM Changing the initial settings with the preference screen (continued) PICTURE AUDIO PICTURE Items Contents ( MONITOR TYPE 16 : 9/16 : 9 MULTI: For an ordinary wide TV. : initial setting) Items Contents ( DIGITAL AUDIO OUTPUT* Select the output signal type suitable to the equipment connected to the DIGITAL OUT terminal (a decoder-built-in amplifier or other digital equipment with an optical input terminal).
EXA10[A_Ux].book Page 40 Tuesday, August 30, 2005 3:53 PM List of relationships of DIGITAL AUDIO OUTPUT preference items and output signal Playback disc DIGITAL AUDIO OUTPUT preference PCM ONLY DOLBY DIGITAL/PCM 48 kHz, 16/20/24 bit Linear PCM DVD VIDEO 96 kHz linear PCM DVD VIDEO 48 kHz, 16 bit stereo linear PCM 48/96/192 kHz, 16/20/24 bit linear PCM DVD AUDIO* 48 kHz, 16 bit stereo linear PCM 44.1/88.2/176.4 kHz, 16/20/24 bit linear PCM DVD AUDIO* 44.
EXA10[A_Ux].book Page 41 Tuesday, August 30, 2005 3:53 PM Listening to the sound of other audio equipment Listening to the sound of other audio equipment Adjust the sound input level of the audio equipment Remote control mode selector You can adjust the sound input level of audio equipment connected to the AUX terminals. AUX 1 3 (play) 2 Slide the remote control mode selector to RECEIVER. Press AUX to select “AUX”.
EXA10[A_Ux].book Page 42 Tuesday, August 30, 2005 3:53 PM Timer Remote control mode selector F AUDIO Using the sleep timer When the time you specify elapses, the system will be turned off automatically. 1 2 2/3 (cursor) Slide the remote control mode selector to RECEIVER. Press SLEEP. • Each time you press the button, the time indicated in the display window on the receiver changes (in minutes).
EXA10[A_Ux].book Page 43 Tuesday, August 30, 2005 3:53 PM Timer (continued) 5 Set the clock beforehand. (A page 15) Press 2 or 3 (cursor) to select “ONCE” or “WEEKLY”, and then press SET. 1 ONCE WEEKLY Using the playback timer 2 Slide the remote control mode selector to RECEIVER. 6 Press CLOCK/TIMER. Display on the receiver The playback timer works once. The playback timer works weekly or every day. Press 2 or 3 (cursor) to select the desired day of the week, and then press SET.
EXA10[A_Ux].book Page 44 Tuesday, August 30, 2005 3:53 PM 9 Press F AUDIO to turn off the receiver. • The playback timer is available only when the receiver is off. This indicator lights up when the playback timer is activated. Activating the playback timer again After following steps 1 and 2 on page 43, press ENTER. Then press F AUDIO to turn off the receiver. Timer For the locations of the remote control buttons, refer to page 42.
EXA10[A_Ux]-07.fm Page 45 Friday, September 2, 2005 2:32 PM Using the AV COMPU LINK function When a JVC-manufactured TV with AV COMPU LINK II or III terminals is connected to the DVD player using these terminals, operating either the TV or the DVD player controls the other equipment at the same time. Connection and setup Operation 1 2 NOTE • “AV COMPU LINK” is printed for terminals on some JVC-manufactured TVs. These terminals are no different from the “AV COMPU LINK I/II” or “AV COMPU LINK” terminal.
EXA10[A_Ux].book Page 46 Tuesday, August 30, 2005 3:53 PM Special cautions Care of the cabinet When cleaning the system, use a soft cloth and follow the relevant instructions on the use of chemically-coated cloths. Do not use benzene, thinner or other organic solvents including disinfectants. These may cause deformation or discoloring. Notes on handling 7 Important cautions Installation of the system • Select a place which is level, dry and neither too hot nor too cold; between 5°C and 35°C.
EXA10[A_Ux]-07.fm Page 47 Friday, September 2, 2005 10:43 AM About DVDs/CDs Region code of DVD VIDEO Playable DVD/CD types Audio CD format VCD/SVCD format MP3/WMA/ JPEG format DVD Video format DVD VR format DivX format ASF (Advanced Systems Format) MPEG1/MPEG2 format CD-R/ CD-RW Playable DVD-R1 DVD-RW — — Playable — — Playable DVD VIDEO players and DVD VIDEO discs have their own Region Code numbers.
Discs that cannot be played back Notes on DivX discs and files • The following discs cannot be played back: DVD-ROM (except for MP3/WMA/JPEG/ASF/DivX/ MPEG1/MPEG2 format), DVD-RAM, CD-ROM, CD-I (CD-I Ready), Photo CD, SACD, etc. Playing back these discs will generate noise and damage the speakers. Damaged discs and discs in an extraordinary shape (other than a disc of 12 cm or 8 cm in diameter) cannot be played back. • The system supports DivX 5.x, 4.x and 3.11.
EXA10[A_Ux].book Page 49 Tuesday, August 30, 2005 3:53 PM About DVDs/CDs (continued) Disc structure DVD VIDEO/DVD VR A DVD VIDEO consists of “titles” and each title may be divided into “chapters”. A DVD VR consists of “original programs” or “play lists” and each original program/play list may be divided into “chapters”. .
EXA10[A_Ux]-07.fm Page 50 Tuesday, October 4, 2005 10:12 AM When you encounter a problem that seems to be a fault, check the following points before contacting the JVC service center: Power source 7 Power does not come on. • The power cord of the receiver or the DVD player is not connected to an AC outlet. → Connect the power cord correctly. (A page 13) Operation 7 You cannot operate any button. • Some specific operations may be restricted for some discs. 7 The remote control does not work.
EXA10[A_Ux]-07.fm Page 51 Thursday, September 1, 2005 11:12 AM Troubleshooting (continued) Other 7 You cannot switch audio or subtitles between languages. • The disc does not contain multiple languages. → If only a single language is recorded on the disc, you cannot switch the current language to another language. (A page 32) 7 No subtitle is displayed. • The disc does not contain any subtitles. → A DVD VIDEO without subtitles cannot display any subtitles. • The subtitle language is set to “OFF”.
EXA10[A_Ux]-specification.fm Page 52 Tuesday, October 4, 2005 10:13 AM Receiver (RX-EXA10) DVD player (XV-EXA10) Tuner FM frequency: AM frequency: Playable DVDs/CDs DVD VIDEO/DVD AUDIO VCD/SVCD/CD CD-R/RW (VCD/SVCD/CD/MP3/WMA/JPEG/DivX/ ASF/MPEG1/MPEG2 format) DVD-R (MP3/WMA/JPEG/DVD VIDEO/DVD VR [CPRM]/DivX/ASF/MPEG1/MPEG2 format) DVD-RW (MP3/WMA/JPEG/DVD VIDEO/DVD VR [CPRM]/DivX/ASF/MPEG1/MPEG2 format) 87.50 MHz - 108.
EXA10[A_Ux].