UX-G45[B].
UX-G45[B].BOOK Page 1 Friday, February 10, 2006 1:03 PM Warnings, Cautions and Others IMPORTANT for the U.K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted.
UX-G45[B].BOOK Page 2 Friday, February 10, 2006 1:03 PM IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: VISIBLE AND / OR INVISIBLE CLASS 1M LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT.
UX-G45[B].BOOK Page 3 Friday, February 10, 2006 1:03 PM SAFETY INSTRUCTIONS “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. Do read the operating instructions before you attempt to use the equipment.
UX-G45[B].BOOK Page 1 Thursday, March 2, 2006 4:26 AM Contents Introduction .................................................... 2 Precautions...................................................................... 2 How to Read This Manual.............................................. 3 Getting Started ............................................... 4 Step 1: Unpack................................................................ 4 Step 2: Prepare the Remote Control ...............................
UX-G45[B].BOOK Page 2 Thursday, March 2, 2006 4:26 AM Introduction Thank you for purchasing the JVC Micro Component System. We hope it will be a valued addition to your home, giving you years of enjoyment. Be sure to read this instruction manual carefully before operating your new stereo system. In it you will find all the information you need to set up and use the system. If you have a query that is not answered by the manual, please contact your dealer.
UX-G45[B].BOOK Page 3 Thursday, March 2, 2006 4:26 AM How to Read This Manual To make this manual as simple and easy-to-understand as possible, we have adapted the following methods: • Button and control operations are explained as listed in the table below. In this manual, the operations using the remote control is mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks.
UX-G45[B].BOOK Page 4 Thursday, March 2, 2006 4:26 AM Getting Started Step 1:Unpack the package and check the accessories. Step 1: Unpack After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied. • FM antenna (1) • AM loop antenna (1) • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately.
UX-G45[B].BOOK Page 5 Thursday, March 2, 2006 4:26 AM Step 3: Hook Up If you need more detailed information, see page 7. For more detailed information on connecting external equipment, see page 13. Illustrations of the input/output terminals below are typical examples. When you connect other components, refer also to their manuals since the terminal names actually printed on the rear may vary. Turn the power off to all components before connections.
UX-G45[B].BOOK Page 6 Thursday, March 2, 2006 4:26 AM FM antenna (supplied) Extend it so that you can obtain the best reception. AM loop antenna (supplied) Turn it until the best reception is obtained.
UX-G45[B].BOOK Page 7 Thursday, March 2, 2006 4:26 AM To assemble and connect the AM loop antenna To assemble the AM loop antenna To connect the AM loop antenna Make sure to connect the wire correctly: The white end to AM EXT, the black end to GND. 1 Hold 2 Insert 3 Release • If the AM loop antenna wire or speaker cords are covered with vinyl, remove the vinyl to expose the tip of the antenna by twisting the vinyl.
UX-G45[B].BOOK Page 8 Thursday, March 2, 2006 4:26 AM Before Operating the System The indications on the display teach you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display.
UX-G45[B].BOOK Page 9 Thursday, March 2, 2006 4:26 AM Daily Operations—Playback 1 Turn on the power. 1 Numeric buttons SET/ RESUME DISPLAY MP3 MODE PRESET UP, PRESET DOWN 4/1, 7,¡/¢ 2 Radio Data System buttons QP LINK FM MODE DIMMER 3 The STANDBY lamp on the main unit turns off. • Without pressing STANDBY/ON , the System turns on by pressing one of the source selecting buttons in the next step. 2 Select the source. Playback automatically starts if the selected source is ready to start.
UX-G45[B].BOOK Page 10 Thursday, March 2, 2006 4:26 AM Listening to the Radio To preset the stations To select the band (FM or AM) Remote ONLY You can preset 30 FM and 15 AM stations. FM 1 Tune in to a station you want to preset. 2 Activate the preset number entry mode. AM SET/RESUME You can also carry out the same operation using the FM or AM buttons on the System. To tune in to a station While FM or AM is selected... Remote control: 3 Main unit: 1 sec.
UX-G45[B].BOOK Page 11 Thursday, March 2, 2006 4:26 AM To tune in to a preset station Remote ONLY To start: To pause: To stop: 1 Select a band (FM or AM). FM AM To release, press again. 2 Select a preset number for the station you store. 1 2 3 4 5 6 7 8 9 0 10 To select a track/group* • You can also use the PRESET UP or PRESET DOWN. Increases the track/group* numbers. Decreases the track/group* numbers. * For details about the group selection, see “For MP3 playback” on page 12.
UX-G45[B].BOOK Page 12 Thursday, March 2, 2006 4:26 AM IMPORTANT • Always set volume to “VOL MIN” when connecting or disconnecting the other equipment. • Connect the USB Memory or DAP directly to the front panel of the unit. Connecting via a USB hub may result in malfunction. • USB Memory and DAPs compatible with the USB mass storage class specifications are connectable. • Some DAPs are not compatible with the unit. • Coded or encrypted tracks in a special method cannot be played on the unit.
UX-G45[B].BOOK Page 13 Thursday, March 2, 2006 4:26 AM Remote ONLY Playing Back Other Equipment Quick Portable Link (QP Link) To connect other equipment If you connect other equipment such as a digital audio player to the AUX terminal and play it back, the source automatically changes to AUX. By using an stereo mini plug cord (not supplied), you can connect equipment with analog audio output jacks such as a Digital Audio Player, or a TV, etc.
UX-G45[B].BOOK Page 14 Thursday, March 2, 2006 4:26 AM Daily Operations—Sound & Other Adjustments Adjusting the Volume Remote control You can adjust the volume level from level 0 (VOL-MIN) to level 31 (VOL-MAX). Remote control: Main unit: VOLUME SET/RESUME CANCEL CLOCK/ TIMER VOLUME DISPLAY PRESET UP, PRESET DOWN To drop the volume in a moment Remote ONLY To restore the volume, press again, or adjust the volume level. FADE MUTING DIMMER A.
UX-G45[B].BOOK Page 15 Thursday, March 2, 2006 4:26 AM Changing the Display Brightness—DIMMER 3 Adjust the minute. PRESET UP You can dim the display window. DIMMER DIM ON SET/RESUME PRESET DOWN DIM OFF (Canceled) “CLOCK OK” appears and the built-in clock starts working. Setting the Clock Remote ONLY To check the current time during play Without setting the built-in clock, you cannot use the Daily Timer (see page 22). • To exit from the clock setting, press CLOCK/TIMER as required.
UX-G45[B].BOOK Page 16 Thursday, March 2, 2006 4:26 AM Turning Off the Power Automatically Remote ONLY To turn off the System after playback is over— Auto Standby This function works only when the source is CD. A.STANDBY A.STBY Canceled (No indication) When Auto Standby is in use, the A.STBY indicator lights on the display. When the disc playback stops, the A.STBY indicator starts flashing.
UX-G45[B].BOOK Page 17 Thursday, March 2, 2006 4:26 AM Advanced Radio Operations To show the Radio Data System information While listening to an FM station... Remote control DISPLAY MODE Station Frequency PS Station names is displayed. “NO PS” will appear if no signal is sent. PTY The broadcast program type is displayed. “NO PTY” will appear if no signal is sent. RT Text messages the station sends is displayed. “NO RT” will appear if no signal is sent.
UX-G45[B].BOOK Page 18 Thursday, March 2, 2006 4:26 AM 3 Start searching. How the Enhanced Other Networks function actually works: PTY SEARCH CASE 1 Ex.: When “NEWS” is selected The receiver searches 30 preset FM stations, stops when it finds the one you have selected, and tunes in to that station. • If no program is found, “NOT” and “FOUND” appear alternately on the display. • To stop searching any time during search, press PTY SEARCH.
UX-G45[B].BOOK Page 19 Thursday, March 2, 2006 4:26 AM Advanced Disc/USB Memory/DAP Operations Programming the Playing Order— Remote control Remote ONLY Program Play You can arrange the playing order of the tracks (up to 32) before you start playback. • Program play can be used only in MP3 TRACK mode. • You can repeat all the programmed tracks by pressing REPEAT. Numeric buttons 1 Before starting playback, press PROGRAM.
UX-G45[B].BOOK Page 20 Thursday, March 2, 2006 4:26 AM To check the programmed contents While the PRGM indicator is shown on the display and before playback... In the programmed order. In the reverse order. Playing at Random—Random Play Remote ONLY You can play back all the tracks on the selected disc, USB Memory or DAP at random. • You can repeat All tracks (PALL) by pressing REPEAT. Press RANDOM. RANDOM To modify the program While the PRGM indicator is shown on the display and before playback...
UX-G45[B].BOOK Page 21 Thursday, March 2, 2006 4:26 AM Playing Repeatedly—Repeat Play Remote ONLY You can repeat playback. Main Unit ONLY You can lock the disc trays so that no one can eject the loaded discs. • This is possible while the System is on standby. For CD/MP3(TRACK mode): REPEAT Prohibiting Disc Ejection—Child Lock 1 ALL While the disc trays are closed...
UX-G45[B].BOOK Page 22 Thursday, March 2, 2006 4:26 AM Timer Operations Setting the Timer Remote control STANDBY/ON SET/RESUME CLOCK/ TIMER Remote ONLY Using Daily Timer, you can wake up with music, etc. • You can store three Daily Timer settings; however, you can activate only one of Daily Timers at the same time. • To exit from the timer setting, press CLOCK/TIMER as required. • To correct a misentry during the process, press CANCEL. You can return to the previous step.
UX-G45[B].BOOK Page 23 Thursday, March 2, 2006 4:26 AM 2 Make the timer setting as you want. 1 Set the hour then the minute for on-time. PRESET UP SET/RESUME To turn off the Timer after its setting is done Since Daily Timer is activated at the same time everyday, you may need to cancel it on some particular days. 1 Select the Timer you want to cancel. PRESET DOWN CLOCK /TIMER 2 Set the hour then the minute for off-time in the same manner.
UX-G45[B].BOOK Page 24 Thursday, March 2, 2006 4:26 AM Additional Information Learning More about This System Daily Operations—Playback (see pages 9 to 13) Listening to the Radio: • If you store a new station into an occupied preset number, the previously stored station in that number will be erased. • When you unplug the AC power cord or if a power failure occurs, the preset stations will be erased in a few days. If this happens, preset the stations again.
UX-G45[B].BOOK Page 25 Thursday, March 2, 2006 4:26 AM PHONE IN: Programs where people can express their views either by phone or in a public form TRAVEL: Programs about travel destinations, package tours, and travel ideas and opportunities LEISURE: Programs concerned with recreational activities such as gardening, cooking, fi shing, etc.
8_ADDITONALINFO.FM Page 26 Thursday, March 2, 2006 6:32 AM Timer Operations: Specifications Daily Timer does not work. ] The System has been turned on when the on-time comes. Timer starts working only when the System is turned off. Amplifier section Output Power: Maintenance To get the best performance of the System, keep your discs, and mechanism clean. Speakers/Impedance: Audio Input Handling discs • When removing the disc from its case, hold it at the edge while pressing the center hole lightly.
UX-G45[B].BOOK Page 27 Thursday, March 2, 2006 4:26 AM Parts Index Refer to the pages to see how to use the buttons and controls.
UX-G45[B].
UX-G45[B].
