Operation Manual

16
Setting the ECO (ecology) Mode
Setting the ECO mode allows you to reduce power
consumption by turning the display off while on standby.
While the System is on standby...
Changing the Scanning Mode
INFO
This System supports progressive scanning.
Select the video signal output according to the type of your
TV. If you connect a progressive TV through the VIDEO
OUT (COMPONENT) jacks, you can enjoy a high quality
picture playback by selecting “PROGRESS.”
Before playback...
RGB
For a conventional TV.
Select to send the composite video signals
or RGB signals through the AV (SCART)
terminal.
Y/C
For a conventional TV.
Select to send S-Video signals through the
AV (SCART) terminal.
PROGRESS
For a progressive TV.
Select to enjoy a progressive scanned
picture through the VIDEO OUT
(COMPONENT) jacks.
• The PRGR (Progressive) indicator lights
on the display.
(while holding...)
Remote
ONLY
Changing the Picture Tone
Remote
ONLY
While showing a playback picture on the TV, you can
select a preset picture tone, or adjust it and store your own
preference.
To select a preset picture tone
1 While playing, display VFP setting screen.
2 Select a preset picture tone.
NORMAL
Normally select this.
CINEMA
Suitable for a movie source.
USER1/USER2
You can adjust parameters and can
store the settings. (See page 17.)
To clear the screen, press VFP again while holding SHIFT.
(while holding...)
On the TV
EN09-18_UX-G500V[B]f.indd 16EN09-18_UX-G500V[B]f.indd 16 3/4/08 10:07:24 AM3/4/08 10:07:24 AM