MICRO COMPONENT SYSTEM UX-S10 —Consists of CA-UXS10 and SP-UXS10 INSTRUCTIONS LVT1563-001A [B] UX-S10[B]_C_01cover_f.p65 1 06.3.
Warnings, Cautions and Others IMPORTANT FOR LASER PRODUCTS IMPORTANT for the U.K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. CAUTION - BE SURE to replace the fuse only with an identical approved type, as originally fitted.
SAFETY INSTRUCTIONS “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. ✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮ Do read the operating instructions before you attempt to use the equipment.
Introduction We would like to thank you for purchasing one of our JVC products. Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual for future reference. About This Manual This manual is organized as follows: • This manual mainly explains operations using the buttons on the remote control.
Contents Location of the Buttons and Controls ............................. 3 Main unit ................................................................................... 3 Remote Control ......................................................................... 5 Getting Started .................................................................. 6 Unpacking ................................................................................. 6 Putting the Batteries into the Remote Control .....................
Location of the Buttons and Controls Become familiar with the buttons and controls on your unit. Main Unit Top view 1 5 6 OPEN 2 3 4 TIMER ON/OFF BAND SOUND /BASS TAPE TUNER CD MULTI CONTROL PHONES 7 CD CONTROL 8 Front view 9 STANDBY/ON p q VOLUME e STANDBY r MICRO COMPONENT SYSTEM UX-S10 w CD SYNCHRO RECORDING OPEN t Inside the front cover y 3 UX-S10[B]_C_03name_f.p65 3 06.3.
Continued Display window on the front panel 1 2 3 4 5 7 6 ON OFF SLEEP ST MONO SOUND BASS MP3 8 9 p SYNC MHz kHz 1ALL GR. PRGM RAND TOTAL REMAIN q w e r t See pages in parentheses for details. Main unit Display window 1 2 3 4 5 6 1 (timer) indicator 2 ON/OFF (timer on-time/off-time) indicators 3 SLEEP indicator 4 FM mode indicators • ST (stereo), MONO 5 SOUND indicator 6 BASS indicator 7 SYNC (synchro) indicator 8 Main display • Shows the source name and other information.
Remote Control See pages in parentheses for details.
Getting Started Continued Unpacking Connections After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied. • FM antenna (1) • AM (MW) loop antenna (1) • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately. To connect speakers You can connect the speakers using the speaker cords.
To connect AM (MW) and FM antennas To connect an outdoor FM antenna Before connecting the antenna, disconnect the supplied FM antenna. FM antenna Outdoor FM antenna (not supplied) FM COA75 Ω XIA L 1 Coaxial cable (not supplied) AM LOO P 2 FM COA75 Ω XIA L AM LOO P AM (MW) loop antenna (supplied) 1 Attach the FM antenna to the FM COAXIAL 75 Ω terminal. Fasten it up in the position which gives you the best reception, then fix it on the wall, etc.
Basic and Common Operations Continued Setting the Clock Before operating the unit any further, first set the unit’s clock. When you plug in the power cord, “0:00” starts flashing on the display. You can set the clock when the unit is either turned on or in standby mode. • There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 1. • When you unplug the AC power cord or if a power failure occurs The clock is reset to “0:00” right away.
Selecting the Source To select the source, press TAPE, TUNER/BAND, or CD. Selecting the Sound Modes TAPE TUNER/ BAND CD • When you select TAPE or CD as the source, playback does not start automatically. To operate the tuner (FM or AM (MW)), see pages 10 – 13. To operate the CD player, see pages 14 – 16. To operate the tape deck, see page 17. To record on a tape, see pages 18 and 19. You can select one of the 4 sound modes. • This function also affects the sound from headphones.
Listening to FM and AM (MW) Broadcasts Tuning in to a Station Continued To change the FM reception mode On the remote control ONLY: 1 Press TUNER/BAND to select either TUNER/ BAND “FM” or “AM.” The unit automatically turns on and tunes in to the previously received station—either FM or AM (MW). • Each time you press the button, the band alternates between FM and AM (MW). When an FM stereo broadcast is hard to receive or noisy, press FM MODE so that the MONO indicator lights up on the display.
Presetting Stations Tuning in to a Preset Station You can preset 30 FM and 10 AM (MW) stations manually. On the remote control ONLY: In some cases, test frequencies have been already stored for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations you want into memory by following the presetting method. • There is a time limit in doing the following steps.
Receiving FM Stations with Radio Data System Radio Data System allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc. With the unit, you can receive the following types of Radio Data System signals. PS (Program Service): Shows commonly known station names. REPEAT/ PTY SEARCH until the PTY code you want appears on the display.
Description of the PTY codes: NEWS: News. WEATHER: Weather reports and forecasts. AFFAIRS: Topical program expanding or enlarging upon the news—debate, or analysis. FINANCE: Stock Market reports, commerce, trading etc. INFO: Program the purpose of which is to impart advice in the widest sense. CHILDREN: Programs targeted at a young audience. SOCIAL: SPORT: Program concerned with any aspect of sports. Programs about sociology, history, geography, psychology and society.
Playing Back Discs Continued This unit has been designed to play back the following discs—CD, CD-R, and CD-RW. Playing Back the Entire Disc—Normal Play When playing a CD-R or CD-RW 1 Press 0 OPEN on the unit. User-edited CD-Rs (CD-Recordable) and CD-RWs (CDReWritable) can be played only if they are already “finalized.” • Usually you can play back your original CD-Rs or CDRWs recorded in music CD format. However, sometimes they may not play depending on their characteristics or recording conditions.
While playing back an MP3 disc ID3 Tag information (the name of the title, artist, and album up to 30 characters) will be shown on the display. When the name is too long to be displayed at once, it is scrolled. This unit supports ID3 Tag ver. 1.1 and 2.0. To stop playing, press 7. Programming the Track Playing Order—Program Play You can arrange the order in which tracks play before you start playing. You can program up to 60 tracks. On the remote control ONLY: 1 Place a disc.
To modify the last programmed track When playing back an MP3 disc: Press PROGRAM in stop mode, then repeat step 3 PROGRAM above. To finish modifying and start playback, press CD 3/8. • You cannot modify the program after programming the 60th track. To clear the program and exit the program play mode Press 7 in stop mode. “PRG CLR” appears and the PRGM indicator disappears on the display. • Changing the source and turning the power off also clear the program.
Playing Back Tapes For Tape operations, use buttons inside the front cover on the unit. 4 Close the cassette holder gently. Playing Back a Tape You can play back type I tapes only. On the unit ONLY: 1 Open the front cover. 5 Press TAPE. TAPE The unit automatically turns on and the source changes to the tape deck. • You can select to the tape by pressing TAPE on the remote control. 6 Press # (play). 2 Press &/) (stop/cassette holder open). The cassette holder opens. The tape starts playing.
Recording Continued Recording from the Radio IMPORTANT: • It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable program and in any literary, dramatic, musical, or artistic embodied therein. • The recording level is automatically set correctly, so it is not affected by the other sound settings.
Recording Discs —Disc Synchronized Recording You cannot press ‡ in the following cases: • If no cassette is inserted. • If a protected tape is inserted. You can start disc play and recording at the same time. On the unit ONLY: 1 Put a recordable cassette in with the exposed part of the tape down. • See also page 17. 2 Close the cassette holder gently. 3 Press CD to select the CD player as To stop recording for a moment, press *. The recording is paused, but the CD playback does not stop.
Using the Timers Continued 3 Press ¢ or 4 Daily Timer and Sleep Timer are available. • Before using these timers, make sure the built-in clock is set correctly (see page 8). repeatedly to adjust the timer-playback volume. Using the Daily Timer You can set the Daily Timer when the unit is either turned on or in standby mode. Press PROGRAM after adjusting the volume. The ON (on-time) indicator appears and the hour indication starts flashing.
To deactivate the timer temporarily, press TIMER ON/OFF until the (timer) indicator goes off. TIMER ON/OFF To activate and change the timer, repeat steps 1 to 7 on page 20. • To activate the timer again without changing TIMER ON/OFF the setting, press TIMER ON/OFF until the (timer) indicator lights up on the display. Using the Sleep Timer With the Sleep Timer, you can fall asleep to your favorite music or radio program. • You can set the Sleep Timer only when the unit is turned on.
Maintenance To get the best performance of the unit, keep your discs, tapes and mechanism clean. General Notes Handling cassette tapes In general, you will have the best performance by keeping your discs, tapes and the mechanism clean. • Store discs and tapes in their cases, and keep them in cabinets or on shelves. • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. • If the tape is loose, it may get stretched, cut, or caught in the cassette.
Troubleshooting If you are having a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service. Symptom Possible Cause Action Power does not come on. The power cord is not connected to an AC outlet. Insert the plug into the socket. No sound is heard. • Connections are incorrect or loose.
Specifications Design and specifications are subject to change without notice. Amplifier Section—CA-UXS10 Output Power (IEC 268-3): 10 W (5 W + 5 W) at 4 Ω (10% THD) Speakers/Impedance: 4 Ω – 16 Ω Tuner FM tuning range: AM (MW) tuning range: 87.50 MHz—108.00 MHz 522 kHz—1 629 kHz CD player Dynamic range: Signal-to-noise ratio: Wow and flutter: 85 dB 85 dB Immeasurable Cassette deck Frequency response: Normal (type I): Wow and flutter: 100 Hz—10 000 Hz 0.
UX-S10 MICRO COMPONENT SYSTEM EN © 2006 Victor Company of Japan, Limited UX-S10[B]_C_01cover_f.p65 2 0306NYMMDWORI 06.3.