DXJ_Cover[U].
DXJ_Safty[U].fm Page 1 Thursday, April 26, 2007 4:40 PM Warnings, Cautions and Others Caution–– (standby/on) button! Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). When installing the apparatus, ensure that the plug is easily accessible. The button in any position does not disconnect the mains line. • When the System is on standby, the STANDBY lamp lights red. • When the System is turned on, the STANDBY lamp goes off. The power can be remote controlled.
DXJ_Safty[U].fm Page 2 Thursday, April 26, 2007 4:40 PM Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1. Front: No obstructions and open spacing. 2. Sides/Top/Back: No obstructions should be placed in the areas shown by the dimensions below. 3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more.
DX-J35[U].book Page 1 Thursday, April 26, 2007 4:41 PM Introduction Playable Disc/File Types INFO Note on Region Code DVD players and DVD Video have their own Region Code numbers. This System can play back only DVD Video with an appropriate Region Code number. • For details, see “Specifications” on page 47. EX.: For Southeast Asia COMPACT DIGITAL VIDEO SUPER VIDEO DIGITAL AUDIO AV files Discs The “√” in the list below shows available disc/file types.
DX-J35[U].book Page 2 Thursday, April 26, 2007 4:41 PM Precautions Contents Installation Connections.................................................................................... 3 Connecting a USB Mass Storage Class Device.......................... 6 Preparing the Remote Control .................................................... 6 Cancelling the Demonstration .................................................... 6 Changing the Color System and Scanning Mode .......................
DX-J35[U].book Page 3 Thursday, April 26, 2007 4:41 PM Connections Do not connect the AC power cord until all other connections have been made. • Connect VIDEO OUT directly to the video input of your TV. Connecting VIDEO OUT to a TV via a VCR may interfere with your viewing when playing back a copyprotected source. Connecting VIDEO OUT to an integrated TV/VCR system may interfere with your viewing. ~ From the video input of TV/monitor See page 4. Ÿ From AM/FM antenna See page 4.
DX-J35[U].book Page 4 Thursday, April 26, 2007 4:41 PM ~ TV/monitor For better FM reception Composite video cord (supplied) S-Video cord (not supplied) Green Red Blue Component video cord (not supplied) FM outdoor antenna (not supplied) • To select progressive scanning mode (see page 6), use COMPONENT jacks. • Connect the VIDEO jack, S-VIDEO jack, or COMPONENT jacks; whichever you want to use. • You can get better picture quality in the order— Composite video ] S-Video ] Component video.
DX-J35[U].book Page 5 Thursday, April 26, 2007 4:41 PM ⁄ Speakers Speaker layout To enjoy multi-channel sound, locate the speakers as follows. If you cannot locate like this, adjust the speaker setting by using the SPK. SETTING menu (see page 38). To connect the speaker cords Front left speaker Press and hold Insert Center speaker Front right speaker Release • When connecting the speaker cords, match their polarity with that of the speaker terminals: red/grey/green to (+) and black to (–).
DX-J35[U].book Page 6 Thursday, April 26, 2007 4:41 PM # Power cord Cancelling the Demonstration Main Unit ONLY Plug the AC power cord to a wall outlet. 2 sec. DO NOT plug in before setting the voltage selector and all connection procedures are completed. DEMO OFF DEMO START Connecting a USB Mass Storage Class Device To start the demonstration, select DEMO START.
DX-J35[U].book Page 7 Thursday, April 26, 2007 4:41 PM Display Indication The indications on the display tell you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. 1 9 2 p q 3 w e 4 r 1 Source signal indicators • DTS: lights when DTS signals are detected. • DIGITAL: lights when Dolby Digital signals are detected.
DX-J35[U].book Page 8 Thursday, April 26, 2007 4:41 PM Daily Operations—Playback In this manual, the operations using the remote control are mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks. ¥ Turn on the power. The STANDBY Led on the main unit goes off. • Without pressing AUDIO, the System also turns on by pressing one of the source selecting buttons in the next step. ø Select the source.
DX-J35[U].book Page 9 Thursday, April 26, 2007 4:41 PM To tune in to a station Adjusting the Volume The volume level can be adjusted in 32 steps (VOLUME MIN, VOLUME 1 – VOLUME 30, and VOLUME MAX). Remote control: While FM or AM is selected... 1 sec. Increases the frequency. Main unit: Decreases the frequency. To drop the volume in a moment Frequency starts changing on the display. When a station (frequency) with sufficient signal strength is tuned in, the frequency search stops.
DX-J35[U].book Page 10 Thursday, April 26, 2007 4:41 PM 4 Store the station. To connect a USB mass storage class device USB cable (not supplied) To tune in to a preset station 1 Select the band (FM or AM). TUNER FM • Always set the volume to the minimum level when connecting or disconnecting the USB mass storage class device. • To disconnect the USB mass storage class device safely, turn off the System before disconnecting the device. TUNER AM AUX 2 Select the preset number for the station you stored.
DX-J35[U].book Page 11 Thursday, April 26, 2007 4:41 PM To select a disc • For DivX files, each time you press the or button, you can skip to a scene of 30 seconds or 5 minutes away depending on the DivX file. Playback starts. (while holding...) Remote ONLY To select a title/group To return to normal playback, press DVD/CD 3 or USB MEMORY 3. While playing... To select an item directly Remote ONLY You can select a title/chapter/track directly and start playback.
DX-J35[U].book Page 12 Thursday, April 26, 2007 4:41 PM 7 For SVCD/VCD with PBC While playing a disc with PBC, “PBC” appears on the display instead of the playing time. When disc menu appears on the TV screen, select an item on the menu. Playback of the selected item starts. • To select a number, see “How to select a number” on page 8.
DX-J35[U].book Page 13 Friday, April 27, 2007 2:45 PM Daily Operations—Sound & Other Adjustments Adjusting the Speaker Output Level Remote Control Remote ONLY INFO CLOCK/TIMER You can adjust the speaker output level from –6 (dB) to +6 (dB). Initial setting: +4 (dB). • You can also use the setup menu to adjust the speaker output level (see page 38). • The function is not available when the surround mode is set to “STEREO” or Mic Mixing is activated. DIMMER 1 Select the speaker you want to adjust.
DX-J35[U].book Page 14 Friday, April 27, 2007 2:45 PM Applying an Optimal Bass Sound Effect —VARIO BASS Creating Your Own Sound INFO You can adjust bass sound characteristics to create a sound suitable for the playback source to your preference. AUTO OFF LITE.n.EASY (Initial setting) (Canceled) TURBO TECHNO MOVIE INFO Modes—User Mode Remote ONLY You can adjust the preset Sound Modes to create your own Sound Modes which suit your taste.
DX-J35[U].book Page 15 Thursday, April 26, 2007 4:41 PM Selecting the Surround Modes INFO • While one of the Surround Modes is activated, “ ” lights up. • For “DVD/CD” and “USB” (multi-channel software): AUTO DOLBY D/DTS/PPCM/LPCM*1 STEREO *1 Selectable Surround Mode varies depending on the software. *2 MOVIE (Dolby Pro Logic II Movie) and MUSIC (Dolby Pro Logic II Music) cannot be used for DivX file.
DX-J35[U].book Page 16 Thursday, April 26, 2007 4:41 PM To adjust the picture tone Setting the Clock 1 Select “USER1” or “USER2.” 2 Remote ONLY INFO Without setting the built-in clock, you cannot use any timers except the Sleep timer. • To exit from the clock setting, press CLOCK/TIMER as required. • To correct a misentry during the process, press CANCEL while holding SHIFT. You can return to the previous step. • Follow steps 1 and 2 on page 15. Select a parameter you want to adjust.
DX-J35[U].book Page 17 Thursday, April 26, 2007 4:41 PM Unique Video Disc/File Operations Selecting the Audio Track Remote Control Remote ONLY INFO For DVD Video/DivX: While playing back a chapter/file containing audio languages, you can select the language to listen to. For DVD Audio: While playing back a track containing audio channels, you can select the audio channel to listen to. For DVD-VR/SVCD/VCD: While playing back a chapter/ track, you can select the audio channel to play.
DX-J35[U].book Page 18 Thursday, April 26, 2007 4:41 PM Selecting the Subtitle Language Remote ONLY For DVD Video/DVD Audio/DivX: While playing back a chapter/file containing subtitles in different languages, you can select the subtitle language to display on the TV screen. For DVD-VR: While playing, you can turn the subtitle on or off. For SVCD: While playing, the SUB TITLE button functions even if no subtitles are recorded on the disc.
DX-J35[U].book Page 19 Thursday, April 26, 2007 4:41 PM Playing Back Bonus Group Remote ONLY INFO For DVD Audio only: Some DVD Audio discs have a special group called “bonus group” whose contents are not open to the public. • To play back a bonus group, you have to enter the specific “key number” (a kind of password) for the bonus group. The way of getting the key number depends on the disc. To resume normal playback, press DVD/CD 3 or USB MEMORY 3.
DX-J35[U].book Page 20 Thursday, April 26, 2007 4:41 PM Advanced Playback Operations Programming the Playing Order Remote Control —Program Play Remote ONLY INFO You can arrange the playing order of the chapters/tracks/ files (up to 99) before you start playback. • Program Play cannot be used for files in a USB mass storage class device, Video files/JPEG files on a disc and DVD-VR. Number buttons 1 Before starting playback, activate Program Play.
DX-J35[U].book Page 21 Thursday, April 26, 2007 4:41 PM To pause: To skip: To stop*: Playing at Random—Random Play Remote ONLY You can play the contents of all the loaded discs at random. • Random Play cannot be used for files in a USB mass storage class device, Video files/JPEG files on a disc, DVD-VR and some DVDs. To release, press DVD/CD 3. 1 Before starting playback, activate Random Play. * Resume does not work for Program Play.
DX-J35[U].book Page 22 Thursday, April 26, 2007 4:41 PM Playing Repeatedly—Repeat Play Remote ONLY You can repeat playback. • You can also select the repeat mode using the on-screen bar (See page 25. Not applicable for AV files and JPEG file.) • For Video file/JPEG file and DVD-VR, see page 28. • The indicator(s) lights on the display as follows to indicate the current repeat mode. • For Program Play: While playing or before playback...
DX-J35[U].book Page 23 Thursday, April 26, 2007 4:41 PM On-Screen Operations On-screen Bar Information Remote control You can check the playback information and use some functions through the on-screen bar. (Not applicable for Audio files and JPEG files.) On-screen bars Number buttons DVD Video 1 2 DVD-VIDEO PG DVD/CD PL , , , , ENTER/SET ON SCREEN USB MEMORY TIME ZOOM 3 DISC 1 TITLE 2 CHAP 3 TOTAL 1:01:58 OFF CHAP. 1/3 1/3 1/1 4 DVD Audio 1 2 DVD-AUDIO REPEAT Dolby D 3/2.
DX-J35[U].book Page 24 Thursday, April 26, 2007 4:41 PM 1 Disc type/source type 2 Playback information Indication Meanings Dolby D/ Audio format DTS/ LPCM/ PPCM 3/2.1 ch/ Channel number 2/0.
DX-J35[U].book Page 25 Thursday, April 26, 2007 4:41 PM To change the time information 4 Select the repeat mode you want. You can change the time information in the on-screen bar and the display window on the main unit. ALL 1 Display the on-screen bar with the pull-down menu. A-B Repeats a desired portion (see below). TITLE Repeats the current title. Dolby D 3/2.1ch DVD-VIDEO TIME TIME OFF OFF TOTAL 1:25:58 1:01:58 DISCTITLE 1 TITLE CHAP233 TOTAL 14 2CHAP CHAP.
DX-J35[U].book Page 26 Thursday, April 26, 2007 4:41 PM Chapter/Track Search 6 Select the end point (B). A-B Repeat starts. The selected portion plays repeatedly. To cancel A-B Repeat, repeat steps 1 to 3, and select “OFF” in step 4. Time Search 1 While playing a disc (without PBC for SVCD/VCD), display the on-screen bar with the pull-down menu. • All discs except DVD: Time Search can be used before starting playback. 2 Select . 3 Display the pop-up window. TIME TIME Dolby D 3/2.
DX-J35[U].book Page 27 Thursday, April 26, 2007 4:41 PM Control screen for AV files/JPEG files Operations Using the Control Screen Remote ONLY For DVD-VR, JPEG file and AV files: You can search for and play the desired items through the control screen. The control screen automatically appears on the TV screen when the System detects Audio files on the loaded disc or connected USB mass storage class device. (For Video files/ JPEG file; it appears when playback is stopped.) Ex.
DX-J35[U].book Page 28 Thursday, April 26, 2007 4:41 PM To start playback For JPEG file: The selected file (still picture) is displayed until you change it. To repeat slide-show for JPEG file While playing or before starting playback... • When repeating JPEG file on disc: ( DISC/ REPEAT DISC) ( GROUP/ REPEAT GROUP) Canceled Slide-show playback starts. Each file (still picture) is shown on the screen for a few seconds, then changes one after another.
DX-J35[U].book Page 29 Thursday, April 26, 2007 4:41 PM Recording Operations Recording onto a Tape Main unit INFO Main Unit ONLY You can use type I tapes for recording. • To play a tape, see page 12. 1 Insert a recordable cassette into deck B. Push USB MEMORY TAPE-A Insert Close TAPE-B Deck A DISC 1-5 DUBBING USB/DISC REC START REC START/STOP 2 Check the tape running direction and Reverse Mode settings on the display.
DX-J35[U].book Page 30 Thursday, April 26, 2007 4:41 PM 4 Start recording. 2 Check the tape running direction and Reverse Mode 3 To stop recording settings on the display. • See step 2 of “Recording onto a Tape” on page 29. Select the source you want to record. • When recording from the disc: Select the disc number you want to start recording from. or Dubbing Tapes Main Unit ONLY • When recording from the USB mass storage class device: You can record a tape from deck A to deck B.
DX-J35[U].book Page 31 Monday, May 7, 2007 11:39 AM Enjoying Karaoke • When you activate the Mic Mixing or Vocal Masking, multi-channel surround modes you selected will be changed to “ALL CH ST” temporarily (“AUTO” will be changed to “ALL CH ST” and “STEREO” remain as “STEREO”). Remote control Number buttons CANCEL MIC MIX RESERVE VOCAL MASKING Source selecting buttons SHIFT VOCAL SUPP.
DX-J35[U].book Page 32 Thursday, April 26, 2007 4:41 PM 2 Connect the microphone(s) (not supplied) to the Adjusting the Sound Track for Karaoke Remote ONLY INFO You can adjust the sound track for Karaoke. For stereo (2-channel) source: By selecting VOCAL MASK, you can reduce the lead vocal—Vocal Masking. For Karaoke disc: By selecting L CHANNEL or R CHANNEL, you can select the audio channel to play. 3 MIC1 and/or MIC2 jack. Mic Mixing will be activated.
DX-J35[U].book Page 33 Thursday, April 26, 2007 4:41 PM You can change five settings for Karaoke. • To exit from Karaoke setting, wait for several seconds after the setting is done. To apply an echo to your voice 1 MICVOL ECHO FANFARE * 2 Remote ONLY To change the scoring level Changing the Karaoke Setting KEYCON You can change the scoring level of Karaoke Scoring. • This function is available only for disc/USB mass storage class device playback. 1 Select “DVD/CD” or “USB” as the source.
DX-J35[U].book Page 34 Thursday, April 26, 2007 4:41 PM To change the mic volume 5 Select songs you want for Karaoke Program Play. Remote ONLY Press the number buttons to select a song in the following order. 1 Select a disc. 2 Select a title/group. 3 Select a chapter/track/file. 1 MICVOL ECHO FANFARE * 2 KEYCON * SCORE LVL* • To select a number, see “How to select a number” on page 8. • To cancel the procedure, press RESERVE while holding SHIFT. The PROGRAM indicator disappears.
DX-J35[U].book Page 35 Thursday, April 26, 2007 4:41 PM Timer Operations 1 Select one of the timer setting modes—ON for Recording Timer or Daily Timer. Remote control Recording Timer Daily Timer REC TIMER ON Canceled Clock setting DAILYTIMER ON (while holding...) AUDIO CLOCK/TIMER SLEEP CANCEL 2 Make the timer setting as you want. , , ENTER/SET Repeat the procedure for the following settings until finished. 1 Set the hour then minute for on-time. 2 Set the hour then minute for off-time.
DX-J35[U].book Page 36 Thursday, April 26, 2007 4:41 PM 3 Turn off the System (on standby) if you have set the timer with the System turned on. To turn on the timer again, repeat step 1 and press ENTER/SET in step 2. Turning Off the Power Automatically Remote ONLY With Sleep Timer, you can fall asleep while listening to music. How Recording Timer works When Recording Timer has been set, the timer indicator ( ) and the REC indicator are lit on the display. Recording Timer works only once.
DX-J35[U].book Page 37 Thursday, April 26, 2007 4:41 PM Setup Menu Operations Basic Procedure Remote Control INFO You can change the setting of the System. • The setup menu can be used only when “DVD/CD” or “USB” is selected as the source. 1 Press SET UP while playback is stopped. LANGUAGE MENU LANGUAGE ENGLISH AUDIO LANGUAGE ENGLISH SUBTITLE ENGLISH ON SCREEN LANGUAGE ENGLISH , , , , ENTER/SET SET UP 2 3 4 5 Press (or ) to select the menu. Press (or ) to select the item. Press ENTER/SET.
DX-J35[U].book Page 38 Thursday, April 26, 2007 4:41 PM AUDIO menu Item Contents D. RANGE COMPRESSION You can enjoy a powerful sound at a low volume level while playing Dolby Digital software. AUTO: Select to apply the compression only to multi-channel encoded audio (except for 1-channel and 2-channel sources.) ON: Select this to always apply the compression. SPK.
DX-J35[U].book Page 39 Thursday, April 26, 2007 4:41 PM Operating the TV You can operate JVC’s TV using the remote control supplied for this System. Remote control To turn on or To select the input mode (either TV or VIDEO): off the TV: TV TV/VIDEO (while holding...) To adjust TV volume: TV CH +,– SHIFT (while holding...) TV VOL +,– To select the TV channel: (while holding...
DX-J35[U].book Page 40 Thursday, April 26, 2007 4:41 PM Additional Information Learning More about This System Connections (see pages 3 to 6) Changing the Color System and Scanning Mode: • If you play back an NTSC disc/file with the color system set to “PAL (PROG),” the disc/file will be reproduced using “PAL 60” format; however, if the TV does not support this format, the screen may not display properly.
DX-J35[U].book Page 41 Thursday, April 26, 2007 4:41 PM • For JPEG playback... – This System can play back JPEG files with the extension code <.jpg> or <.jpeg> (regardless of the letter case— upper/lower). – It is recommended that you record a file at 640 x 480 resolution. (If a file has been recorded at a resolution of more than 640 x 480, it will take a long time to be shown.) – This System can play only baseline JPEG files*. Progressive JPEG files* or lossless JPEG files* cannot be played.
DX-J35[U].book Page 42 Thursday, April 26, 2007 4:41 PM Advanced Playback Operations (see pages 20 to 22) Programming the Playing Order—Program Play: – While programming steps... Your entry will be ignored if you have tried to program an item number that does not exist on the disc (for example, selecting track 14 on a disc that only has 12 tracks).
DX-J35[U].book Page 43 Thursday, April 26, 2007 4:41 PM Reserving Karaoke Songs—Karaoke Program Play: • You can use RESERVE button when a microphone is plugged in. However, you can cancel Karaoke Program Play using the button even if a microphone is not plugged in. In case you reactivate Karaoke Program Play, plug in a microphone. • If you have selected a disc tray on which a disc containing Video files or JPEG file or DVD-VR is loaded, that disc number is skipped.
DX-J35[U].book Page 44 Thursday, April 26, 2007 4:41 PM Maintenance To get the best performance of the System, keep your discs, tapes and mechanism clean. Handling discs • Remove the disc from its case by holding it at the edge while pressing the center hole lightly. • Do not touch the shiny surface of the disc, or bend the disc. • Put the disc back in its case after use to prevent warping. • Be careful not to scratch the surface of the disc when placing it back in its case.
DX-J35[U].book Page 45 Thursday, April 26, 2007 4:41 PM Disc/file Operations: Karaoke Operations: The disc does not play. ] You have inserted a DVD Video whose Region Code is not correct. (“REGION ERR” appears on the display.) ] The disc is placed upside down. Place the disc with the label side up. ID3 Tag on an MP3 disc cannot be shown. ] There are two types of ID3 Tag—Version 1 and Version 2. This System can only show ID3 Tag Version 1. Groups and files are not played back as you expect.
DX-J35[U].
DX-J35[U].book Page 47 Thursday, April 26, 2007 4:41 PM Specifications Amplifier section Cassette deck section Output Power: FRONT SPEAKERS: 100 W per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than 10% total harmonic distortion. SURROUND SPEAKERS:50 W per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than 10% total harmonic distortion. CENTER SPEAKER: 50 W, min. RMS, driven into 6 Ω at 1 kHz with no more than 10% total harmonic distortion.
DX-J35[U].book Page 48 Thursday, April 26, 2007 4:41 PM Parts Index Remote control Button AUDIO TV 7 ¡,1 ¢,4 8 a s w c r e z , 8 , , , ENTER/SET Number buttons ACTIVE BASS EXT LEVEL + , – ANGLE AUDIO MPX AUDIO VOL+,– CANCEL CH.
DXJ_Cover[U].fm Page 2 Friday, April 27, 2007 6:16 PM Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, and U.K.) CA-DXJ35 COMPACT COMPONENT SYSTEM CAUTION for mains (AC) line BEFORE PLUGGING IN, do check that your mains (AC) line voltage corresponds with the position of the voltage selector switch provided on the outside of this equipment and, if different, reset the voltage selector switch, to prevent from a damage or risk of fire/electric shock.
DXJ_Cover[U].
DXJ_Safty[U].fm Page 1 Thursday, February 1, 2007 9:58 PM Warnings, Cautions and Others Caution–– (standby/on) button! Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). When installing the apparatus, ensure that the plug is easily accessible. The button in any position does not disconnect the mains line. • When the System is on standby, the STANDBY lamp lights red. • When the System is turned on, the STANDBY lamp goes off. The power can be remote controlled.
DXJ_Safty[U].fm Page 2 Thursday, February 1, 2007 9:58 PM Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1. Front: No obstructions and open spacing. 2. Sides/Top/Back: No obstructions should be placed in the areas shown by the dimensions below. 3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more.
DX-J10_20_30[U].book Page 1 Friday, February 2, 2007 11:25 PM Introduction Playable Disc/File Types INFO *1 *1 Note on Region Code DVD players and DVD Video have their own Region Code numbers. This System can play back only DVD Video with an appropriate Region Code number. • For details, see “Specifications” on page 47 EX.: For Southeast Asia COMPACT DIGITAL VIDEO SUPER VIDEO DIGITAL AUDIO Audio formats AV files Discs The “√” in the list below shows available disc/file types.
DX-J10_20_30[U].book Page 2 Friday, February 2, 2007 11:25 PM Precautions Contents Installation Connections.................................................................................... 3 Connecting a USB Mass storage class device ............................ 6 Preparing the Remote Control .................................................... 6 Cancelling the Demonstration .................................................... 6 Changing the Color System and Scanning Mode .......................
DX-J10_20_30[U].book Page 3 Friday, February 2, 2007 11:25 PM Connections Do not connect the AC power cord until all other connections have been made. • Connect VIDEO OUT directly to the video input of your TV. Connecting VIDEO OUT to a TV via a VCR may interfere with your viewing when playing back a copyprotected source. Connecting VIDEO OUT to an integrated TV/VCR system may interfere with your viewing.
DX-J10_20_30[U].book Page 4 Friday, February 2, 2007 11:25 PM ~ TV/monitor ! AM/FM antenna To assemble the AM loop antenna Composite video cord (supplied) S-Video cord (not supplied) Green Red Blue Component video cord (not supplied) • To select progressive scanning mode (see page 6), use COMPONENT jacks. • Connect the VIDEO jack, S-VIDEO jack, or COMPONENT jacks (CA-DXJ30 only); whichever you want to use. • You can get better picture quality in the order— Component video > S video > Composite video.
DX-J10_20_30[U].book Page 5 Friday, February 2, 2007 11:25 PM ⁄ Speakers To connect the speaker cords Press and hold Insert Release • When connecting the speaker cords, match their polarity with that of the speaker terminals: blue/red to (+) and black to (–). For CA-DXJ30 From right subwoofer (red/black) From left subwoofer (red/black) • Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the System.
DX-J10_20_30[U].book Page 6 Friday, February 2, 2007 11:25 PM Connecting a USB Mass storage class device Cancelling the Demonstration You can connect a USB mass storage class device such as a USB flash memory, hard disk drive, multimedia card reader, digital camera, etc. to this System. Main Unit ONLY 2 sec. DEMO OFF USB cable (not supplied) DEMO START To start the demonstration, select DEMO START. Main unit • You cannot connect a personal computer to the MEMORY) terminal of the System.
Indication.fm Page 7 Monday, February 12, 2007 9:59 AM Display Indication The indications on the display tell you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. 1 7 2 8 9 3 p q w e 1 Source signal indicators • DTS: lights when DTS signals are detected. • DIGITAL: lights when Dolby Digital signals are detected.
DX-J10_20_30[U].book Page 8 Friday, February 2, 2007 11:25 PM Daily Operations—Playback In this manual, the operations using the remote control are mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks. ¥ Turn on the power. The STANDBY lamp on the main unit goes off. • Without pressing AUDIO, the System also turns on by pressing one of the source selecting buttons in the next step. ø Select the source.
DX-J10_20_30[U].book Page 9 Friday, February 2, 2007 11:25 PM To tune in to a station Adjusting the Volume The volume level can be adjusted in 32 steps (VOLUME MIN, VOLUME 1 – VOLUME 30, and VOLUME MAX). Remote control: While FM or AM is selected... 1 sec. Increases the frequency. Main unit: Decreases the frequency. To drop the volume in a moment Frequency starts changing on the display. When a station (frequency) with sufficient signal strength is tuned in, the frequency search stops.
DX-J10_20_30[U].book Page 10 Friday, February 2, 2007 11:25 PM 4 Store the station. To connect a USB mass storage class device USB cable (not supplied) To tune in to a preset station 1 Select the band (FM or AM). TUNER FM • Always set the volume to the minimum level when connecting or disconnecting the USB mass storage class device. • To disconnect the USB mass storage class device safely, turn off the System before disconnecting the device.
DX-J10_20_30[U].book Page 11 Friday, February 2, 2007 11:25 PM To select a disc • For DivX files, each time you press the or button, you can skip to a scene of 30 seconds or 5 minutes away depending on the DivX file. Playback starts. (while holding...) Remote ONLY To select a title/group To return to normal playback, press DVD/CD 3 or USB MEMORY 3. While playing... To select an item directly Remote ONLY You can select a title/chapter/track directly and start playback.
DX-J10_20_30[U].book Page 12 Friday, February 2, 2007 11:25 PM 7 For SVCD/VCD with PBC While playing a disc with PBC, “PBC” appears on the display instead of the playing time. When disc menu appears on the TV screen, select an item on the menu. Playback of the selected item starts. • To select a number, see “How to select a number” on page 8.
Basic_op.fm Page 13 Tuesday, February 13, 2007 1:16 PM Daily Operations—Sound & Other Adjustments Adjusting the Speaker Output Remote Control Balance Remote ONLY You can adjust the speaker output balance. L–6 0 CLOCK/TIMER (while holding...) R–6 DIMMER CANCEL , , , , ENTER/SET DISPLAY BALANCE L–R SOUND MODE 3D PHONIC SHIFT Reinforcing the Bass Sound INFO You can adjust the Active Bass level from level 1 (minimum) to level 4 (maximum).
DX-J10_20_30[U].book Page 14 Friday, February 2, 2007 11:25 PM Selecting the Sound Modes 2 Select the SEA parameter you want to adjust. Remote ONLY 1 Adjust BASS. 2 Adjust MID (Mid-range). 3 Adjust TRE (Treble). You can select one of the preset Sound Modes. SEA Modes ROCK POP FLAT CLASSIC STADIUM DANCE HALL Surround Modes* SEA (Sound Effect Amplifier) Modes ROCK Boosts low and high frequency. Good for acoustic music (initial setting). POP Good for music with an emphasis on vocal.
DX-J10_20_30[U].book Page 15 Friday, February 2, 2007 11:25 PM Creating 3-Dimensional Sound Field—3D Phonic Changing the Picture Tone Remote ONLY INFO This function is available only for disc/USB mass storage class device playback. While playing a disc/USB mass storage class device... Remote ONLY While viewing a playback picture on the TV, you can select the preset picture tone, or adjust it and store your own preference. To select a preset picture tone 1 While playing, display VFP setting screen.
DX-J10_20_30[U].book Page 16 Friday, February 2, 2007 11:25 PM 3 Adjust the parameter. Setting the Clock Remote ONLY INFO 4 Repeat steps 2 to 3 to adjust other parameters. Without setting the built-in clock, you cannot use any timers except the Sleep timer. • To exit from the clock setting, press CLOCK/TIMER as required. • To correct a misentry during the process, press CANCEL while holding SHIFT. You can return to the previous step. To erase the VFP screen, press VFP again.
DX-J10_20_30[U].book Page 17 Friday, February 2, 2007 11:25 PM Unique Video Disc/File Operations Selecting the Audio Track Remote Control Remote ONLY INFO For DVD Video/DivX: While playing back a chapter/file containing audio languages, you can select the language to listen to. For DVD Audio (CA-DXJ30 only): While playing back a track containing audio channels, you can select the audio channel to listen to.
DX-J10_20_30[U].book Page 18 Friday, February 2, 2007 11:25 PM Selecting the Subtitle Language Remote ONLY For DVD Video/DVD Audio/DivX: While playing back a chapter/file containing subtitles in different languages, you can select the subtitle language to display on the TV screen. For DVD-VR: While playing, you can turn the subtitle on or off. For SVCD: While playing, the SUB TITLE button functions even if no subtitles are recorded on the disc.
DX-J10_20_30[U].book Page 19 Friday, February 2, 2007 11:25 PM Playing Back Bonus Group To resume normal playback, press DVD/CD 3 or USB MEMORY 3. Remote ONLY (CA-DXJ30 only) For DVD Audio only: Some DVD Audio discs have a special group called “bonus group” whose contents are not open to the public. • To play back a bonus group, you have to enter the specific “key number” (a kind of password) for the bonus group. The way of getting the key number depends on the disc.
DX-J10_20_30[U].book Page 20 Friday, February 2, 2007 11:25 PM Advanced Playback Operations Programming the Playing Order Remote Control —Program Play Remote ONLY INFO You can arrange the playing order of the chapters/tracks/ files (up to 99) before you start playback. • Program Play cannot be used for files in a USB mass storage class device, Video files/JPEG files on a disc and DVD-VR. Number buttons 1 Before starting playback, activate Program Play.
DX-J10_20_30[U].book Page 21 Friday, February 2, 2007 11:25 PM To pause: To skip: To stop*: Playing at Random—Random Play Remote ONLY You can play the contents of all the loaded discs at random. • Random Play cannot be used for files in a USB mass storage class device, Video files/JPEG files on a disc, DVD-VR and some DVDs. To release, press DVD/CD 3. 1 Before starting playback, activate Random Play. * Resume does not work for Program Play.
DX-J10_20_30[U].book Page 22 Friday, February 2, 2007 11:25 PM Playing Repeatedly—Repeat Play Remote ONLY You can repeat playback. • You can also select the repeat mode using the on-screen bar (See page 23. Not applicable for AV files and JPEG file.) • For Video file/JPEG file and DVD-VR, see page 28. • The indicator(s) lights on the display as follows to indicate the current repeat mode. • For Program Play: While playing or before playback...
DX-J10_20_30[U].book Page 23 Friday, February 2, 2007 11:25 PM On-Screen Operations On-screen Bar Information Remote control You can check the playback information and use some functions through the on-screen bar. (Not applicable for Audio files and JPEG files.) On-screen bars Number buttons DVD Video 1 2 DVD-VIDEO PG DVD/CD PL , , , , ENTER/SET ON SCREEN USB MEMORY TIME ZOOM 3 DISC 1 TITLE 2 CHAP 3 TOTAL 1:01:58 OFF CHAP.
DX-J10_20_30[U].book Page 24 Friday, February 2, 2007 11:25 PM 1 Disc type/source type 2 Playback information Indication Meanings Operations Using the On-screen Bar Remote ONLY INFO Dolby D/ DTS/ LPCM Audio format 3/2.1 ch/ 2.0/0 ch Channel number Basic operation procedures through the on-screen bar are as follows: Ex.: Selecting a subtitle (French) for DVD Video: While a disc is selected as the source... PROGRAM/ RANDOM Current play mode 1 Display the on-screen bar with the pull-down menu.
DX-J10_20_30[U].book Page 25 Friday, February 2, 2007 11:25 PM To change the time information 4 Select the repeat mode you want. You can change the time information in the on-screen bar and the display window on the main unit. ALL Repeats all discs or all programmed tracks. 1 Display the on-screen bar with the pull-down menu. A-B Repeats a desired portion (see below). TITLE Repeats the current title. GROUP Repeats the current group. DISC Repeats the disc (except for DVD).
DX-J10_20_30[U].book Page 26 Friday, February 2, 2007 11:25 PM Chapter/Track Search 6 Select the end point (B). A-B Repeat starts. The selected portion plays repeatedly. To cancel A-B Repeat, repeat steps 1 to 3, and select “OFF” in step 4. Time Search 1 While playing a disc (without PBC for SVCD/VCD), display the on-screen bar with the pull-down menu. • All discs except DVD: Time Search can be used before starting playback. 2 Select . 3 Display the pop-up window. TIME TIME Dolby D 3/2.
DX-J10_20_30[U].book Page 27 Friday, February 2, 2007 11:25 PM Control screen for AV files/JPEG file Operations Using the Control Screen Remote ONLY For DVD-VR, JPEG file and AV files: You can search for and play the desired items through the control screen. The control screen automatically appears on the TV screen when the System detects Audio files on the loaded disc or connected USB mass storage class device. (For Video files/ JPEG file; it appears when playback is stopped.) Ex.
DX-J10_20_30[U].book Page 28 Friday, February 2, 2007 11:25 PM To start playback For JPEG file: The selected file (still picture) is displayed until you change it. To repeat slide-show for JPEG file While playing or before starting playback... • When repeating JPEG file on disc: ( DISC/ REPEAT DISC) ( GROUP/ REPEAT GROUP) Canceled Slide-show playback starts. Each file (still picture) is shown on the screen for a few seconds, then changes one after another.
DX-J10_20_30[U].book Page 29 Friday, February 2, 2007 11:25 PM Recording Operations Recording onto a Tape Main unit INFO Main Unit ONLY You can use type I tapes for recording. • To play a tape, see page 12. 1 Insert a recordable cassette into deck B. Push USB MEMORY TAPE-A Insert Close TAPE-B Deck A DISC 1-5 DUBBING USB/DISC REC START REC START/STOP 2 Check the tape running direction and Reverse Mode settings on the display.
DX-J10_20_30[U].book Page 30 Friday, February 2, 2007 11:25 PM 4 Start recording. 2 Check the tape running direction and Reverse Mode 3 To stop recording settings on the display. • See step 2 of “Recording onto a Tape” on page 29. Select the source you want to record. When recording from the disc: • Select the disc number you want to start recording from. or Dubbing Tapes Main Unit ONLY When recording from the USB mass storage class device: You can record a tape from deck A to deck B.
karaoke.fm Page 31 Tuesday, February 13, 2007 1:17 PM Enjoying Karaoke • You cannot enjoy karaoke with DVD-VR, Video files and JPEG files. Remote control Number buttons CANCEL MIC MIX RESERVE VOCAL MASKING Source selecting buttons VOCAL SUPP. KARAOKE SETTING KARAOKE SCORING KARAOKE SETTING / , KARAOKE SETTING / IMPORTANT • Always set MIC LEVEL to “0” when connecting or disconnecting the microphone. • MIC LEVEL adjustment is valid for both microphones connected to the MIC 1 and MIC 2 jacks.
DX-J10_20_30[U].book Page 32 Friday, February 2, 2007 11:25 PM 2 Connect the microphone(s) (not supplied) to the Adjusting the Sound Track for Karaoke Remote ONLY INFO You can adjust the sound track for Karaoke. For stereo (2-channel) source: By selecting VOCAL MASK, you can reduce the lead vocal—Vocal Masking. For Karaoke disc: By selecting L CHANNEL or R CHANNEL, you can select the audio channel to play. While Mic Mixing is activated...
DX-J10_20_30[U].book Page 33 Friday, February 2, 2007 11:25 PM To change the calculation level Changing the Karaoke Setting You can change five settings for Karaoke. • To escape from Karaoke setting, wait for several seconds after the setting is done. To apply an echo to your voice 1 MICVOL ECHO * FANFARE 2 Remote ONLY You can change the scoring level of Karaoke Scoring. • This function is available only for disc/USB mass storage class device playback. 1 Select “DVD/CD” or “USB” as the source.
DX-J10_20_30[U].book Page 34 Friday, February 2, 2007 11:25 PM To change the mic volume 5 Select songs you want for Karaoke Program Play. Remote ONLY Press the number buttons to select a song in the following order. 1 Select a disc. 2 Select a title/group. 3 Select a chapter/track/file. 1 MICVOL ECHO FANFARE * 2 KEYCON * SCORE LVL* • To select a number, see “How to select a number” on page 8. • To cancel the procedure, press RESERVE while holding SHIFT. The PROGRAM indicator disappears.
DX-J10_20_30[U].book Page 35 Friday, February 2, 2007 11:25 PM Timer Operations 1 Select one of the timer setting modes—ON for Recording Timer or Daily Timer. Remote control Recording Timer Daily Timer REC TIMER ON Canceled Clock setting DAILYTIMER ON (while holding...) AUDIO CLOCK/TIMER SLEEP CANCEL 2 Make the timer setting as you want. , , ENTER/SET Repeat the procedure for the following setting until finished. 1 Set the hour then minute for on-time. 2 Set the hour then minute for off-time.
DX-J10_20_30[U].book Page 36 Friday, February 2, 2007 11:25 PM 3 Turn off the System (on standby) if you have set the timer with the System turned on. To turn on the timer again, repeat step 1 and press ENTER/SET in step 2. Turning Off the Power Automatically With Sleep Timer, you can fall asleep while listening to music. How Recording Timer works When Recording Timer has been set, the timer indicator ( ) and the REC indicator are lit on the display. Recording Timer works only once.
DX-J10_20_30[U].book Page 37 Friday, February 2, 2007 11:25 PM Setup Menu Operations Basic Procedure Remote Control You can change the setting of the System. • The setup menu can be used only when “DVD/CD” or “USB” is selected as the source. 1 Press SET UP while playback is stopped. LANGUAGE MENU LANGUAGE ENGLISH AUDIO LANGUAGE ENGLISH SUBTITLE ENGLISH ON SCREEN LANGUAGE ENGLISH , , , , ENTER/SET SET UP 2 3 4 5 Press (or ) to select the menu. Press (or ) to select the item. Press ENTER/SET.
DX-J10_20_30[U].book Page 38 Friday, February 2, 2007 11:25 PM AUDIO menu Item Contents DIGITAL AUDIO OUTPUT Set this item correctly when using the OPTICAL DIGITAL OUTPUT terminal on the rear. PCM ONLY: When connecting to audio equipment which is compatible with only linear PCM signals. DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with built-in Dolby Digital decoder.
TV_op.fm Page 39 Monday, February 12, 2007 6:01 PM Operating the TV You can operate JVC’s TV using the remote control supplied for this System. Remote control To turn on or To select the input mode (either TV or VIDEO): off the TV: TV TV/VIDEO (while holding...) To adjust TV volume: TV CH +,– SHIFT (while holding...) TV VOL +,– To select the TV channel: (while holding...
DX-J10_20_30[U].book Page 40 Friday, February 2, 2007 11:25 PM Additional Information Learning More about This System Connections (see pages 3 to 6) Changing the Color System and Scanning Mode: • If you play back an NTSC disc/file with the color system set to “PAL (PROG*),” the disc/file will be reproduced using “PAL 60” format; however, if the TV does not support this format, the screen may not display properly.
DX-J10_20_30[U].book Page 41 Friday, February 2, 2007 11:25 PM • For JPEG playback... – This System can play back JPEG files with the extension code <.jpg> or <.jpeg> (regardless of the letter case— upper/lower). – It is recommended that you record a file at 640 x 480 resolution. (If a file has been recorded at a resolution of more than 640 x 480, it will take a long time to be shown.) – This System can play only baseline JPEG files*. Progressive JPEG files* or lossless JPEG files* cannot be played.
DX-J10_20_30[U].book Page 42 Friday, February 2, 2007 11:25 PM On-Screen Operations (see pages 23 to 28) Operations Using the On-screen Bar: • A-B Repeat is possible only within the same title or within the same track. Recording Operations (see pages 29 to 30) General: • You cannot change the source during recording. • There is leader tape which cannot be recorded onto at the start and the end of cassette tapes.
DX-J10_20_30[U].book Page 43 Friday, February 2, 2007 11:25 PM Timer Operations (see pages 35 to 36) Handling cassette tapes Setting the Timer: • If you do not specify the preset station or track number correctly while setting a timer, the currently selected station or the first track will be played when timer is activated. • When you unplug the AC power cord or if a power failure occurs, the timer will be canceled. You need to set the clock first, then the timer again.
DX-J10_20_30[U].book Page 44 Friday, February 2, 2007 11:25 PM Troubleshooting If you are having a problem with your System, check this list for a possible solution before calling for service. General: Adjustments or settings are suddenly canceled before you finish. ] There is a time limit. Repeat procedure again. Operations are disabled. ] The built-in microprocessor may malfunction due to external electrical interference. Unplug the AC power cord and then plug it back in.
DX-J10_20_30[U].book Page 45 Friday, February 2, 2007 11:25 PM OPTICAL DIGITAL OUTPUT Signals DIGITAL AUDIO OUTPUT Playback disc/file DVD Video with 48 kHz, 16/20/24 bit Linear PCM Output Signals STREAM/PCM with DTS 48 kHz, 16 bit Linear PCM Dolby Digital bitstream DTS bitstream DVD Audio (CA-DXJ30 only) with 48/96/192 kHz, 16/20/24 bit Linear PCM with 44.1/88.2/176.
DX-J10_20_30[U].
DX-J10_20_30[U].book Page 47 Friday, February 2, 2007 11:25 PM Specifications Amplifier section Cassette deck section Output Power: FRONT SPEAKERS: 100 W per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than 10% total harmonic distortion. SUBWOOFERS:(for CA-DXJ30)100 W per channel, min. RMS, driven into 6 Ω at 63 Hz with no more than 10% total harmonic distortion. (for CA-DXJ20)100 W, min. RMS, driven into 6 Ω at 63 Hz with no more than 10% total harmonic distortion.
DX-J10_20_30[U].
DXJ_Cover[U].fm Page 2 Thursday, February 1, 2007 9:57 PM CAUTION for mains (AC) line BEFORE PLUGGING IN, do check that your mains (AC) line voltage corresponds with the position of the voltage selector switch provided on the outside of this equipment and, if different, reset the voltage selector switch, to prevent from a damage or risk of fire/electric shock.
