Filename [SR-MV30U_01Cov1.fm] SR-MV30U_01Cov1.
Filename [SR-MV30U_02Safety.fm] Masterpage:Left0 SR-MV30U_00.book Page 2 Tuesday, March 30, 2004 5:46 PM 2 EN Dear Customer, Thank you for purchasing the JVC DVD video recorder/video cassette recorder. Before use, please read the safety information and precautions to ensure safe use of your new unit. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION: This unit should be used with AC 120Vd, 60Hz only.
Filename [SR-MV30U_02Safety.fm] SR-MV30U_00.book Page 3 Tuesday, March 30, 2004 5:46 PM Masterpage:Right+ EN IMPORTANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servicing.
Filename [SR-MV30U_02Safety.fm] Masterpage:Left+ SR-MV30U_00.book Page 4 Tuesday, March 30, 2004 5:46 PM 4 EN USE SERVICING 1. Accessories To avoid personal injury: 1. Servicing If your product is not operating correctly or exhibits a marked change in performance and you are unable to restore normal operation by following the detailed procedure in its operating instructions, do not attempt to service it yourself as opening or removing covers may expose you to dangerous voltage or other hazards.
Filename [SR-MV30U_02Safety.fm] SR-MV30U_00.book Page 5 Tuesday, March 30, 2004 5:46 PM Masterpage:Right+ EN Declaration of Conformity Model Number: SR-MV30 Trade Name: JVC Responsible Party: JVC Americas Corp. Address: 1700 Valley Road Wayne, N.J. 07470 Telephone Number: 973-317-5000 This device complies with Part 15 of FCC Rules.
Filename [SR-MV30U_02Safety.fm] Masterpage:Left0 SR-MV30U_00.book Page 6 Tuesday, March 30, 2004 5:46 PM 6 EN Features of this unit This unit allows you various types of playback and recording because this unit has two tuners. Record programs on both DVD deck and VCR deck simultaneously Operate the DVD deck while recording on the VCR deck 1 Start recording on the DVD deck. (墌 pg. 38) 2 Start recording on the VCR deck. (墌 pg. 50) 1 Start recording on the VCR deck. (墌 pg. 50) 2 Press VCR/DVD.
Filename [SR-MV30U_02Safety.fm] Masterpage:Right0 SR-MV30U_02Safety.fm Page 7 Monday, June 7, 2004 9:23 AM CONTENTS DISC INFORMATION 8 About Discs ...................................................................................8 INDEX 12 INSTALLING YOUR NEW UNIT 17 Basic Connection ........................................................................17 INITIAL SETTINGS 18 EDITING REMOTE CONTROL OPERATIONS ON DVD DECK SUBSIDIARY SETTINGS Basic Playback ..................................
Filename [SR-MV30U_03DiscInfo.fm] Masterpage:Left0 SR-MV30U_00.book Page 8 Tuesday, March 30, 2004 5:46 PM 8 EN DISC INFORMATION After finalizing — After a DVD-R/RW disc (Video mode) has been finalized, it is possible to play back the recorded programs (video and/or audio) on a standard DVD video player as a DVD VIDEO disc. About Discs Recordable/playable Discs You can use discs with the following logos for recording and playback. DVD-RAM 12 cm: 4.7 GB/9.4 GB 8 cm: 1.4 GB/2.8 GB Ver. 2.0 Ver. 2.
Filename [SR-MV30U_03DiscInfo.fm] Masterpage:Right+ SR-MV30U_00.book Page 9 Tuesday, March 30, 2004 5:46 PM DISC INFORMATION ● DVD-AUDIO discs compatible with DVD video players can be played. ● Super Audio CDs (SACD) compatible with conventional CD players can be played. Unplayable Discs The following types of discs cannot be played using this unit.
Filename [SR-MV30U_03DiscInfo.fm] Masterpage:Left+ SR-MV30U_00.book Page 10 Tuesday, March 30, 2004 5:46 PM 10 EN DISC INFORMATION Audio CD/Video CD Typically, Audio CD discs are divided into separate tracks each containing one song. Each track is assigned a number. For example, the third track is Track 3. The same is true for Video CD discs. However, some discs are not divided into tracks.
Filename [SR-MV30U_03DiscInfo.fm] Masterpage:Right+ SR-MV30U_00.book Page 11 Tuesday, March 30, 2004 5:46 PM DISC INFORMATION Placing A Disc Care And Handling Of Discs Opening the disc tray Press x (OPEN/CLOSE) to open the disc tray. How to handle discs When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged.
Filename [SR-MV30U_04Name.fm] Masterpage:Left0 SR-MV30U_04Name.fm Page 12 Thursday, April 1, 2004 2:05 PM 12 EN INDEX Front View A B C D E F G H I J POWER VCR/DVD VCR EJECT TIMER VCR REC OPEN/CLOSE STOP TIMER REMAIN REC PAUSE DVD REC VCR REW FF ( ) ( ) DUBBING CH DVD DV IN TV/VCR F-1 S-VIDEO KL VIDEO REC MODE (MONO) L - AUDIO - R M N A Standby/On Button (1) B VCR/DVD Button C VCR Timer Lamp (TIMER) 墌 pg. 52 VCR Lamp 墌 pg. 47 VCR Recording Lamp (REC) 墌 pg.
Filename [SR-MV30U_04Name.fm] Masterpage:Right+ SR-MV30U_00.book Page 13 Tuesday, March 30, 2004 5:46 PM INDEX EN 13 Rear View A B C D E F DVD 1 DIGITAL PCM/ AUDIO OUT STREAM S VIDEO G S VIDEO COMPONENT VIDEO OUT S VIDEO DVD Y OPTICAL PB COAXIAL PR VIDEO L L AUDIO AUDIO R R R INPUT L-1 DVD/VCR H ● This prevents the temperature from rising inside the unit. Do not remove it. ● Install the unit so as not to block the area around the fan.
Filename [SR-MV30U_04Name.fm] Masterpage:Left+ SR-MV30U_00.book Page 14 Tuesday, March 30, 2004 5:46 PM 14 EN INDEX Front Display Panel A BC KL D M E N A Disc Type Indicator When a disc is loaded, the type of the disc is indicated. Disc Status Indicator When a disc is running, the disc marks rotate. During High-Speed Search: Rotate faster than normal playback. During Slow Motion: Rotate slower than normal playback. While recording: Inner red ring lights in the same way as normal playback.
Filename [SR-MV30U_04Name.fm] Masterpage:Right+ SR-MV30U_00.book Page 15 Tuesday, March 30, 2004 5:46 PM INDEX EN 15 On-Screen Display (DVD deck) When “SUPERIMPOSE” is set to “AUTO” and ON SCREEN on the remote control is pressed, various operational indicators appear on the TV screen. To clear the operational indicators, press ON SCREEN twice. A Disc Display Displays the type of the disc loaded on the disc tray. B Title Number* Displays number of the title currently being played back.
Filename [SR-MV30U_04Name.fm] Masterpage:Left+ SR-MV30U_04Name.
Filename [SR-MV30U_04Name.fm] SR-MV30U_00.
Filename [SR-MV30U_04Name.fm] Masterpage:Left0 SR-MV30U_00.book Page 18 Tuesday, March 30, 2004 5:46 PM 18 EN INITIAL SETTINGS Plug & Play Set Auto Clock Set/Auto Tuner Set This unit sets the clock and tuner channels automatically when AC power cord is first connected to an AC outlet. The antenna cable must be connected for the Plug & Play setting. The time and date can be set automatically by the clock setting data transmitted from one of the regular TV broadcast channels.
Filename [SR-MV30U_04Name.fm] Masterpage:Right+ SR-MV30U_00.book Page 19 Tuesday, March 30, 2004 5:46 PM INITIAL SETTINGS EN 19 On-screen Language Set Language This unit offers you the choice to view on-screen messages in 3 different languages. ● Turn on the unit. ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/CABLE/DBS/DVD switch to DVD. VCR/DVD 1 Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit. 2 Press SET UP to access the Main Menu screen.
Filename [SR-MV30U_04Name.fm] Masterpage:Left+ SR-MV30U_00.book Page 20 Tuesday, March 30, 2004 5:46 PM 20 EN INITIAL SETTINGS NOTE: Clock Set Perform clock setting only if the clock has not been set correctly by the Plug&Play setting. ● Turn on the unit. ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/CABLE/DBS/DVD switch to DVD.
Filename [SR-MV30U_04Name.fm] Masterpage:Right+ SR-MV30U_00.book Page 21 Tuesday, March 30, 2004 5:46 PM INITIAL SETTINGS EN 21 Manual Channel Set Tuner Set You can add the channels you want or delete the channels you do not want manually. ● Turn on the unit. ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/CABLE/DBS/DVD switch to DVD. VCR/DVD 1 Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit. 2 Press SET UP to access the Main Menu screen.
Filename [SR-MV30U_04Name.fm] Masterpage:Left+ SR-MV30U_04Name.fm Page 22 Friday, November 12, 2004 2:53 PM 22 EN INITIAL SETTINGS Cable Box and/or DBS Receiver Control Setting (DVD Deck Only) If your cable box or DBS receiver does not have audio/video output connectors Connect the RF output connector on the cable box or DBS receiver to the VHF/UHF IN (DVD) connector on the rear of your unit via antenna splitter.
Filename [SR-MV30U_04Name.fm] Masterpage:Right+ SR-MV30U_00.book Page 23 Tuesday, March 30, 2004 5:46 PM INITIAL SETTINGS 8 Select the output channel. Your selection depends on how the cable box or DBS receiver is connected to your unit. ● If the cable box or DBS receiver is connected to your unit’s VHF/ UHF IN (DVD) connector on the rear panel, press rt to select the channel number representing the cable box’s output (CH2 – CH9), then press ENTER.
Filename [SR-MV30U_04Name.fm] Masterpage:Left+ SR-MV30U_00.book Page 24 Tuesday, March 30, 2004 5:46 PM 24 EN INITIAL SETTINGS Monitor Set (DVD Deck Only) You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs. ● Turn on the unit. ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/CABLE/DBS/DVD switch to DVD. 1 Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit.
Filename [SR-MV30U_05DVD Operation1.fm] Masterpage:Right0 SR-MV30U_00.book Page 25 Tuesday, March 30, 2004 5:46 PM OPERATIONS ON DVD DECK 25 To play back an MP3/JPEG disc, see “Playback With MP3/JPEG Navigation” (墌 pg. 61). Basic Playback 1 Load a disc. ● Turn on the unit. ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/CABLE/DBS/DVD switch to DVD. x VCR/DVD 4 8 9 ● For details, refer to “Placing A Disc” (墌 pg. 11). ● Pressing 4 also closes the disc tray.
Filename [SR-MV30U_05DVD Operation1.fm] Masterpage:Left+ SR-MV30U_00.book Page 26 Tuesday, March 30, 2004 5:46 PM 26 EN OPERATIONS ON DVD DECK Locating The Start Point Of The Item Or Skip The Item Playback Features ● ● ● ● Turn on the unit. Turn on the TV and select the video channel (or AV mode). Slide the TV/CABLE/DBS/DVD switch to DVD. Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit. Press 2 or 6 during playback.
Filename [SR-MV30U_05DVD Operation1.fm] Masterpage:Right+ SR-MV30U_00.book Page 27 Tuesday, March 30, 2004 5:46 PM OPERATIONS ON DVD DECK Still Picture/Frame-By-Frame Playback 1 Press 9 to pause during playback. 2 Press 9 or w e to activate frame-by-frame playback. ● Each press of 9 advances the still picture frame by frame. ● Each press of w e advances/reverses the still picture frame by frame. ● Frame-by-frame playback for reverse direction cannot be performed with Video CD discs.
Filename [SR-MV30U_05DVD Operation1.fm] Masterpage:Left+ SR-MV30U_00.book Page 28 Tuesday, March 30, 2004 5:46 PM 28 EN OPERATIONS ON DVD DECK ● To clear the angle selection display, press ENTER. In addition, the angle selection display disappears automatically if no operation is done for 10 seconds.
Filename [SR-MV30U_05DVD Operation1.fm] Masterpage:Right+ SR-MV30U_00.book Page 29 Tuesday, March 30, 2004 5:46 PM OPERATIONS ON DVD DECK Audio Channel Selection EN 29 It is called “Live Memory Playback” to start playback of the program being recorded, with a time-lag between a recording point and a playback point, as shown in the figure below. Current playback point (Live Memory Playback) When playing discs on which you recorded stereo programs, you can choose the desired audio channel.
Filename [SR-MV30U_05DVD Operation1.fm] Masterpage:Left+ SR-MV30U_00.book Page 30 Tuesday, March 30, 2004 5:46 PM 30 EN OPERATIONS ON DVD DECK Overview Of Live Memory Playback You can play back a program you are recording from the beginning while continuing to record or timer record onto a DVD-RAM disc. This is called “Live Memory Playback”.
Filename [SR-MV30U_05DVD Operation1.fm] Masterpage:Right+ SR-MV30U_00.book Page 31 Tuesday, March 30, 2004 5:46 PM OPERATIONS ON DVD DECK EN 31 Display During Live Memory Playback During recording, you can watch at your will what was previously recorded or is currently being recorded. It is possible to perform freely normal playback operations (forward/reverse high-speed search and variable-speed search) within the range of the red or blue bar on the TV screen.
Filename [SR-MV30U_05DVD Operation1.fm] Masterpage:Left+ SR-MV30U_00.book Page 32 Tuesday, March 30, 2004 5:46 PM 32 EN OPERATIONS ON DVD DECK Buttons To Be Used During Live Memory Playback ● Turn on the unit. ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/CABLE/DBS/DVD switch to DVD. 1 2 3 4 5 6 7 8 9 0 H9 Pressing once pauses playback (still picture playback). Pressing repeatedly advances the still picture frame by frame.
Filename [SR-MV30U_05DVD Operation1.fm] Masterpage:Right+ SR-MV30U_00.book Page 33 Tuesday, March 30, 2004 5:46 PM OPERATIONS ON DVD DECK Using The On-screen Bar The on-screen bar allows you to control various playback functions. Some of the functions operated on Navigation Menu can be controlled on the On-screen bar. Be sure to clear Library Database DVD Navi screen by pressing NAVIGATION. 1 2 3 4 5 6 7 8 9 G H I J K L 33 Disc type. Select this for Repeat Playback. (墌 pg.
Filename [SR-MV30U_05DVD Operation1.fm] Masterpage:Left+ SR-MV30U_00.book Page 34 Tuesday, March 30, 2004 5:46 PM 34 EN OPERATIONS ON DVD DECK A-B Repeat Playback CANCEL 1 2 3 4 5 6 7 8 9 0–9 0 ON SCREEN ENTER rtw e You can repeat the desired part. During playback 1 Press ON SCREEN twice to access the on-screen bar. 2 Press w e to select “ ”. 3 Press ENTER at the beginning of the desired part you want to repeat (point A).
Filename [SR-MV30U_05DVD Operation1.fm] Masterpage:Right+ SR-MV30U_00.book Page 35 Tuesday, March 30, 2004 5:46 PM OPERATIONS ON DVD DECK 4 Press the number keys to enter the desired item number, then press ENTER. EN 35 Simulated Surround Effect ● Playback starts from the selected section. Examples: A To select track 5, press the number key “5”. B To select track 15, press the number key “1” and “5”. C To select track 25, press the number key “2”, then “5”.
Filename [SR-MV30U_05DVD Operation1.fm] Masterpage:Left+ SR-MV30U_05DVD Operation1.fm Page 36 Friday, November 12, 2004 2:48 PM 36 EN OPERATIONS ON DVD DECK B To select track 15, press the number key “1” and “5”. C To select track 25, press the number key “2” and “5”. 1 2 3 4 5 6 7 8 9 CANCEL 0–9 0 ON SCREEN ENTER 2 rtw e 6 4 CLEAR (8) If you have specified a wrong selection Press CANCEL. The last selection is erased. Or press CLEAR (8). The whole selection is erased. 4 Press 4.
Filename [SR-MV30U_05DVD Operation1.fm] Masterpage:Right+ SR-MV30U_00.book Page 37 Tuesday, March 30, 2004 5:46 PM OPERATIONS ON DVD DECK EN 37 11 Press the number keys to enter the same password as in Parental Lock step 8 above, then press ENTER. 12 Press SET UP twice to complete the setting. NOTE: Remember your password, or make a note of it. This function restricts playback of DVD VIDEO discs which contain violent (and other) scenes according to the level set by the user.
Filename [SR-MV30U_06DVD Operation2.fm] Masterpage:Left0 SR-MV30U_00.book Page 38 Tuesday, March 30, 2004 5:46 PM 38 EN OPERATIONS ON DVD DECK NOTES: Basic Recording ● Turn on the unit. ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/CABLE/DBS/DVD switch to DVD. ATTENTION: It is not possible to record programs on a DVD-R disc which has already been finalized. ● It is recommended to format a DVD-RAM disc before use if you use the disc on this unit for the first time.
Filename [SR-MV30U_06DVD Operation2.fm] Masterpage:Right+ SR-MV30U_00.book Page 39 Tuesday, March 30, 2004 5:46 PM OPERATIONS ON DVD DECK 39 Instant Timer Recording (ITR) Recording Features ● ● ● ● EN This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the unit off after recording is finished. Turn on the unit. Turn on the TV and select the video channel (or AV mode). Slide the TV/CABLE/DBS/DVD switch to DVD.
Filename [SR-MV30U_06DVD Operation2.fm] Masterpage:Left+ SR-MV30U_00.book Page 40 Tuesday, March 30, 2004 5:46 PM 40 EN OPERATIONS ON DVD DECK Free Rate Function NOTES: To record the entire program, the unit automatically set the appropriate recording mode depending on the combination of the total time of the program to be recorded and either the remaining disc space or the specified recording time (from 60 minutes to 480 minutes).
Filename [SR-MV30U_06DVD Operation2.fm] Masterpage:Right+ SR-MV30U_00.book Page 41 Tuesday, March 30, 2004 5:46 PM OPERATIONS ON DVD DECK VCR Plus+ Timer Programing ® You can program this unit to timer-record as many as 8 programs. With the VCR Plus+ system, timer programing is greatly simplified because each TV program has a corresponding code number which your unit is able to recognize. You can use the remote control to enter the PlusCode number.
Filename [SR-MV30U_06DVD Operation2.fm] Masterpage:Left+ SR-MV30U_00.book Page 42 Tuesday, March 30, 2004 5:46 PM 42 EN OPERATIONS ON DVD DECK Manual Timer Programing 10 Press ENTER to access the Program Confirmation screen. 11 Press ENTER to complete timer programing. ● To program another timer, repeat steps 3 – 11. 12 Press DVD TIMER (#) to engage the unit’s timer mode. The You can program this unit to timer-record as many as 8 programs.
Filename [SR-MV30U_06DVD Operation2.fm] Masterpage:Right+ SR-MV30U_00.book Page 43 Tuesday, March 30, 2004 5:46 PM OPERATIONS ON DVD DECK On-Disc Timer Programing On-Disc Timer Programing is a function used with discs that are especially intended for a specific program. The disc is then programed for a program you always watch every day or every week.
Filename [SR-MV30U_06DVD Operation2.fm] Masterpage:Left+ SR-MV30U_00.book Page 44 Tuesday, March 30, 2004 5:46 PM 44 EN OPERATIONS ON DVD DECK How Discs Are Overwritten (Example 1) To record a 1-hour serial drama every Friday in SP mode Overwritten 1st Blank 2nd 1st 2nd Overwritten 3rd The first program is overwritten by the third. 4th 3rd The second program is overwritten by the forth.
Filename [SR-MV30U_06DVD Operation2.fm] Masterpage:Right+ SR-MV30U_00.book Page 45 Tuesday, March 30, 2004 5:46 PM OPERATIONS ON DVD DECK EN 45 Check, Cancel And Change Programs DVD TIMER (#) VCR/DVD CANCEL PROG/CHECK ENTER 1 When the DVD timer lamp lights on the unit 1 2 3 4 5 6 7 8 9 1 Press DVD TIMER (#), then press 1. When “ ” lights on the front display panel and the DVD timer lamp also lights up on the unit. Press 1.
Filename [SR-MV30U_06DVD Operation2.fm] Masterpage:Left+ SR-MV30U_00.book Page 46 Tuesday, March 30, 2004 5:46 PM 46 EN OPERATIONS ON DVD DECK When Programs Overlap Each Other CANCEL PROG/CHECK ENTER 1 2 3 4 5 6 7 8 9 If “PROGRAM OVERLAPPED” appears, you have another program overlapping the program you have just made. Confirm with the arrow on “OK”, then press PROG/CHECK. Program Check screen appears and conflicting programs will be highlighted in pink.
Filename [SR-MV30U_07VCR Operation.fm] Masterpage:Right0 SR-MV30U_00.book Page 47 Tuesday, March 30, 2004 5:46 PM OPERATIONS ON VCR DECK EN 47 1 Load a cassette. Make sure the window side is up, the rear label Basic Playback side is facing you and the arrow on the front of the cassette is pointed toward the unit. ● Turn on the unit. ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/CABLE/DBS/DVD switch to DVD. 4 5 ● Do not apply too much pressure when inserting.
Filename [SR-MV30U_07VCR Operation.fm] Masterpage:Left+ SR-MV30U_00.book Page 48 Tuesday, March 30, 2004 5:46 PM 48 EN OPERATIONS ON VCR DECK High-Speed Search Playback Features ● ● ● ● During playback, press 5 for forward high-speed search, or 3 for reverse high-speed search. Turn on the unit. Turn on the TV and select the video channel (or AV mode). Slide the TV/CABLE/DBS/DVD switch to DVD. Press VCR/DVD repeatedly so that the VCR lamp lights up on the unit.
Filename [SR-MV30U_07VCR Operation.fm] Masterpage:Right+ SR-MV30U_00.book Page 49 Tuesday, March 30, 2004 5:46 PM OPERATIONS ON VCR DECK EN 49 Next Function Memory Soundtrack Selection The Next Function Memory “tells” the unit what to do after rewinding. Before continuing, make sure the unit is in the Stop mode. Your unit is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.
Filename [SR-MV30U_07VCR Operation.fm] Masterpage:Left+ SR-MV30U_07VCR Operation.fm Page 50 Thursday, April 1, 2004 2:11 PM 50 EN OPERATIONS ON VCR DECK Basic Recording Recording Features ● Turn on the unit. ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/CABLE/DBS/DVD switch to DVD. 479 VCR/DVD 8 REC MODE ● ● ● ● Turn on the unit. Turn on the TV and select the video channel (or AV mode). Slide the TV/CABLE/DBS/DVD switch to DVD.
Filename [SR-MV30U_07VCR Operation.fm] Masterpage:Right+ SR-MV30U_00.book Page 51 Tuesday, March 30, 2004 5:46 PM OPERATIONS ON VCR DECK EN 51 Instant Timer Recording (ITR) Second Audio Recording This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the unit off after recording is finished. This unit’s built-in MTS decoder enables reception of Multichannel TV Sound broadcast. To record a SAP program received, set “2ND AUDIO RECORD” to “ON”.
Filename [SR-MV30U_07VCR Operation.fm] Masterpage:Left+ SR-MV30U_00.book Page 52 Tuesday, March 30, 2004 5:46 PM 52 EN OPERATIONS ON VCR DECK VCR Plus+ Timer Programing ® You can program this unit to timer-record as many as 8 programs. With the VCR Plus+ system, timer programing is greatly simplified because each TV program has a corresponding code number which your unit is able to recognize. You can use the remote control to enter the PlusCode number.
Filename [SR-MV30U_07VCR Operation.fm] Masterpage:Right+ SR-MV30U_07VCR Operation.fm Page 53 Thursday, April 1, 2004 2:13 PM OPERATIONS ON VCR DECK press w e to select “SP/EP”, then press rt to select the desired recording mode. You can program this unit to timer-record as many as 8 programs. If you do not know the PlusCode number for the program you wish to record, use the following procedure to set your unit to timer-record the program. Make sure that the unit’s built-in clock is set properly.
Filename [SR-MV30U_07VCR Operation.fm] Masterpage:Left+ SR-MV30U_00.book Page 54 Tuesday, March 30, 2004 5:46 PM 54 EN OPERATIONS ON VCR DECK When Programs Overlap Each Other If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made. The Program Check screen appears and conflicting programs will start blinking.
Filename [SR-MV30U_08Navigation.fm] Masterpage:Right0 SR-MV30U_00.book Page 55 Tuesday, March 30, 2004 5:46 PM NAVIGATION (DVD DECK ONLY) Library Database DVD Navi The Library Database DVD Navi enables you to search and select the desired programs recorded on a DVD-RAM/R/RW disc very easily. You can record up to 99 programs on a disc. Each time a program is recorded on the disc, the information of the program is registered for the Library Database DVD Navi automatically.
Filename [SR-MV30U_08Navigation.fm] Masterpage:Left+ SR-MV30U_00.book Page 56 Tuesday, March 30, 2004 5:46 PM 56 EN NAVIGATION (DVD DECK ONLY) Scan For Beginning(s) Of Program(s) Modify Original Information ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/CABLE/DBS/DVD switch to DVD. 1 2 3 4 5 6 7 8 9 0 ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/CABLE/DBS/DVD switch to DVD.
Filename [SR-MV30U_08Navigation.fm] Masterpage:Right+ SR-MV30U_08Navigation.fm Page 57 Thursday, April 1, 2004 2:16 PM NAVIGATION (DVD DECK ONLY) EN 57 Modify Program Name Delete Program 1 Perform steps 1 to 3 of “Modify Index” (墌 pg. 56) before continuing. You cannot record any more with Library Database DVD Navi once the registered programs on the disc reach 99 programs. Deleting unnecessary programs after dubbing or other operations can increase remaining time and available recording capacity.
Filename [SR-MV30U_08Navigation.fm] Masterpage:Left+ SR-MV30U_00.book Page 58 Tuesday, March 30, 2004 5:46 PM 58 EN NAVIGATION (DVD DECK ONLY) Modify Play List Information 8 Press w e to select “PREVIEW”, then press ENTER to preview the play list. 9 Press w e to select “EXECUTE”, then press ENTER. The play list is created. ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/CABLE/DBS/DVD switch to DVD. To modify the points A Press w e to select “CLEAR”, then press ENTER.
Filename [SR-MV30U_08Navigation.fm] Masterpage:Right+ SR-MV30U_00.book Page 59 Tuesday, March 30, 2004 5:46 PM NAVIGATION (DVD DECK ONLY) 6 Find the point where you want the moved scene to begin, then press ENTER with the arrow on “IN”. The edit-in time is fixed and the elapsed playing time starts counting again. 7 Find the point where you want the moved scene to end, then press ENTER with the arrow on “OUT”. The edit-out time is fixed. 8 Press 4 to start playback.
Filename [SR-MV30U_08Navigation.fm] Masterpage:Left+ SR-MV30U_00.book Page 60 Tuesday, March 30, 2004 5:46 PM 60 EN NAVIGATION (DVD DECK ONLY) Modify Library Information Register Disc 1 Load a disc you want to register. 2 Press NAVIGATION. The Library Database DVD Navi screen appears. Program information can be registered in the unit’s memory for up to 1,300 programs. It is helpful when finding out on which disc the desired program is recorded.
Filename [SR-MV30U_08Navigation.fm] Masterpage:Right+ SR-MV30U_00.book Page 61 Tuesday, March 30, 2004 5:46 PM NAVIGATION (DVD DECK ONLY) Playback With MP3/JPEG Navigation EN 61 4 Press w e to select the desired group, then press ENTER. For MP3 Playback ● The tracks in the selected group appear. For JPEG Playback This unit can play back discs that MP3 sound files and JPEG image files taken with digital still cameras or other devices are recorded.
Filename [SR-MV30U_09Editing.fm] Masterpage:Left0 SR-MV30U_00.book Page 62 Tuesday, March 30, 2004 5:46 PM 62 EN EDITING Tape Dubbing (From VCR To DVD) 1 For DVD deck Load a recordable disc. For VCR deck Load a cassette you want to dub. Dubbing An Entire Cassette Because this unit includes both DVD deck and VCR deck, you can easily use this unit for dubbing without connecting any other equipment. ● Turn on the unit. ● Turn on the TV and select the video channel (or AV mode).
Filename [SR-MV30U_09Editing.fm] Masterpage:Right+ SR-MV30U_00.book Page 63 Tuesday, March 30, 2004 5:46 PM EDITING Manual Dubbing (From VCR To DVD) EN 63 1 For DVD deck Load a recordable disc. For VCR deck Load a cassette you want to dub. Dubbing A Part Of A Cassette You can dub the selected scenes on a tape to the DVD disc, starting and stopping wherever you wish. ● Turn on the unit. ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/CABLE/DBS/DVD switch to DVD.
Filename [SR-MV30U_09Editing.fm] Masterpage:Left+ SR-MV30U_00.book Page 64 Tuesday, March 30, 2004 5:46 PM 64 EN EDITING 1 For DVD deck Disc Dubbing (From DVD To VCR) Load a disc you want to dub. For VCR deck Load a cassette with the record safety tab intact. Dubbing An Entire Disc Because this unit includes both DVD deck and VCR deck, you can easily use this unit for dubbing without connecting any other equipment. ● Turn on the unit. ● Turn on the TV and select the video channel (or AV mode).
Filename [SR-MV30U_09Editing.fm] Masterpage:Right+ SR-MV30U_00.book Page 65 Tuesday, March 30, 2004 5:46 PM EDITING Manual Dubbing (From DVD To VCR) EN 65 1 For DVD deck Load a disc you want to dub. For VCR deck Load a cassette with the record safety tab intact. Dubbing A Part Of A Disc You can dub the selected scenes on a tape to the DVD disc, starting and stopping wherever you wish. ● Turn on the unit. ● Turn on the TV and select the video channel (or AV mode).
Filename [SR-MV30U_09Editing.fm] Masterpage:Left+ SR-MV30U_09Editing.fm Page 66 Thursday, April 1, 2004 2:20 PM 66 EDITING EN DV Dubbing (DVD Deck Only) You can dub programs from a camcorder or DV equipment connected to the unit with a DV cable. The unit’s remote control allows you the limited control of the connected camcorder or DV equipment functions during dubbing. NOTES: ● Use the DV cable VC-VDV 204U for connection.
Filename [SR-MV30U_09Editing.fm] Masterpage:Right+ SR-MV30U_00.book Page 67 Tuesday, March 30, 2004 5:46 PM EDITING Edit From A Camcorder EN 67 Slide the TV/CABLE/DBS/DVD switch to DVD. You can use a camcorder as the source player and your unit as the recording deck. A If the camcorder has no S-VIDEO output connector: AUDIO/VIDEO input 1 Make connections.
Filename [SR-MV30U_09Editing.fm] Masterpage:Left+ SR-MV30U_00.book Page 68 Tuesday, March 30, 2004 5:46 PM 68 EN EDITING Edit To Or From Another Recorder You can use your unit as the source player or as the recording deck. NOTE: When using another recorder as the recording deck, refer to its instruction manual. Your unit Slide the TV/CABLE/DBS/DVD switch to DVD. 1 Make connections.
Filename [SR-MV30U_09Editing.fm] Masterpage:Right+ SR-MV30U_00.book Page 69 Tuesday, March 30, 2004 5:46 PM EDITING EN 69 1 Connect the unit and a digital audio device using either an Digital Audio Dubbing optional optical cable or an optional coaxial cable. You can dub selected audio from a DVD or Audio CD disc to a digital audio device. However, it is not possible to dub copy-protected discs. ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/CABLE/DBS/DVD switch to DVD.
Filename [SR-MV30U_09Editing.fm] Masterpage:Left0 SR-MV30U_00.book Page 70 Tuesday, March 30, 2004 5:46 PM 70 EN REMOTE CONTROL Remote Control Functions Remote control 1/2/3/4 Code Switching The remote control is capable of controlling four JVC video units independently. Each of the units can respond to one of four codes (1, 2, 3 or 4). The remote control is preset to send 3 code signals because your unit is initially set to respond to 3 code signals.
Filename [SR-MV30U_09Editing.fm] Masterpage:Right+ SR-MV30U_00.book Page 71 Tuesday, March 30, 2004 5:46 PM REMOTE CONTROL Cable Box Or DBS Receiver Multi-Brand Remote Control Your remote control can operate the basic functions of your cable box or DBS (Direct Broadcast Satellite) receiver set. In addition to JVC cable boxes or DBS receivers, other manufacturer’s cable boxes or DBS receiver can also be controlled. Slide the TV/CABLE/DBS/DVD switch to CABLE/DBS. ● Keep pressing SET UP down during step 1.
Filename [SR-MV30U_09Editing.fm] Masterpage:Left0 SR-MV30U_00.book Page 72 Tuesday, March 30, 2004 5:46 PM 72 EN SYSTEM CONNECTIONS Connecting To A Dolby Digital Decoder Or An Amplifier With Built-in DTS These instructions enable you to connect your unit to a Dolby Digital decoder or an amplifier with built-in DTS. 1 Connect the unit and a Dolby Digital decoder or an amplifier with built-in DTS using either an optional optical cable or an optional coaxial cable.
Filename [SR-MV30U_10Subsidiary.fm] Masterpage:Right0 SR-MV30U_00.book Page 73 Tuesday, March 30, 2004 5:46 PM SUBSIDIARY SETTINGS Mode Set (DVD Deck) VCR/DVD 2 3 4 5 6 7 8 9 0 rtw e ENTER SET UP 8 DIGITAL AUDIO OUT — DOLBY DIGITAL/PCM / STREAM/ PCM / PCM ONLY Set to the appropriate mode according to the type of the device connected to DIGITAL AUDIO OUT connector.
Filename [SR-MV30U_10Subsidiary.fm] Masterpage:Left+ SR-MV30U_10Subsidiary.fm Page 74 Thursday, April 1, 2004 2:29 PM 74 EN SUBSIDIARY SETTINGS VIDEO IN/OUT DISPLAY SET 8 MONITOR TYPE — 4:3LB / 4:3PS / 16:9 AUTO / 16:9 FIX 8 SUPERIMPOSE — OFF / AUTO You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs. For details, refer to “Monitor Set (DVD Deck Only)” (墌 pg. 24).
Filename [SR-MV30U_10Subsidiary.fm] Masterpage:Right+ SR-MV30U_00.book Page 75 Tuesday, March 30, 2004 5:46 PM SUBSIDIARY SETTINGS Mode Set (VCR Deck) You can record in SP mode on VHS cassettes with S-VHS picture quality. You can play back a tape recorded using the S-VHS ET function on most of S-VHS recorders and of VHS recorders equipped with SQPB (S-VHS QUASI PLAYBACK) function. (Notice some recorders are not compatible with the S-VHS ET function.
Filename [SR-MV30U_10Subsidiary.fm] Masterpage:Left+ SR-MV30U_00.book Page 76 Tuesday, March 30, 2004 5:46 PM 76 EN SUBSIDIARY SETTINGS 8 SUPERIMPOSE — AUTO / OFF 8 VIDEO STABILIZER — ON / OFF When this function is set to “AUTO”, various operational indicators appear on the TV screen. When this function is set to “ON”, you can automatically correct vertical vibration in the picture when playing back unstable recordings made on another recorder.
Filename [SR-MV30U_10Subsidiary.fm] Masterpage:Right+ SR-MV30U_00.book Page 77 Tuesday, March 30, 2004 5:46 PM SUBSIDIARY SETTINGS Changing VCR Plus+ Setting ® The VCR Plus+ programing system assigns a VCR Plus+ guide channel to the TV channels and the cable channels. These guide channel numbers are also called the VCR Plus+ channel codes. Most TV listings have a section, usually a chart, indicating the guide channel numbers assigned to each station.
Filename [SR-MV30U_10Subsidiary.fm] Masterpage:Left+ SR-MV30U_00.book Page 78 Tuesday, March 30, 2004 5:46 PM 78 EN SUBSIDIARY SETTINGS Format A Disc (DVD Deck Only) Format A DVD-RAM Disc 1 Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit. Some DVD-RAM/RW discs are unformatted. Format the disc when you use an unformatted disc or you want to delete all recordings and data on the disc. ATTENTION: ● When a disc is formatted, all recordings and data are erased.
Filename [SR-MV30U_10Subsidiary.fm] SR-MV30U_10Subsidiary.fm Page 79 Thursday, April 1, 2004 2:33 PM Masterpage:Right+ SUBSIDIARY SETTINGS Finalize A Disc (DVD Deck Only) EN 79 Finalize A DVD-R/RW Disc 1 Perform steps 2 to 4 of “Format A DVD-RAM Disc” (墌 pg. 78) before continuing. 2 Press rt to select “FINALIZE”, then press ENTER. Press w e Finalizing DVD-R/RW discs recorded on this unit makes it possible for the discs to be played back on other DVD players.
Filename [SR-MV30U_10Subsidiary.fm] SR-MV30U_00.book Page 80 Tuesday, March 30, 2004 5:46 PM 80 EN Masterpage:Left+ SUBSIDIARY SETTINGS Scan Mode Set Tray Lock (DVD Deck Only) If you connect the unit and TV with Component Video Connection (墌 pg. 17), you can select the scan mode from two modes: Interlaced scan mode which is used in the conventional TV system, and Progressive scan mode which enables reproduction of higher-quality images. For details, refer to “GLOSSARY” (墌 pg. 86).
Filename [SR-MV30U_10Subsidiary.fm] SR-MV30U_00.book Page 81 Tuesday, March 30, 2004 5:46 PM Masterpage:Right0 TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can solve the trouble yourself. Small problems are often easily solved, and this can save you the trouble of sending your unit off for repair. General No power is supplied to the unit. ● The AC power plug is disconnected from the AC outlet. ]Connect the AC power plug to the AC outlet securely. (墌 pg.
Filename [SR-MV30U_10Subsidiary.fm] SR-MV30U_00.book Page 82 Tuesday, March 30, 2004 5:46 PM 82 EN TROUBLESHOOTING Playback (VCR Deck) The VCR deck can not be operated. ● The VCR deck is not selected. ]Press VCR/DVD repeatedly so that the VCR lamp lights up on the unit. Masterpage:Left+ Recording (VCR Deck) During recording, the tape does not run. The VCR recording lamp lights up on the front display panel. ● The unit is in the Record Pause mode. Press 4 to resume recording.
Filename [SR-MV30U_10Subsidiary.fm] SR-MV30U_00.book Page 83 Tuesday, March 30, 2004 5:46 PM Masterpage:Right+ TROUBLESHOOTING Timer Recording (DVD Deck) EN 83 Timer Recording (VCR Deck) Timer programing cannot be made. Timer programing cannot be made. ● Date and time is not correct. ]Set date and time correctly. (墌 pg. 20) ● The timer is not engaged. ]Press DVD TIMER (#) and confirm that the DVD timer lamp lights up on the unit. ● Timer recording is in progress.
Filename [SR-MV30U_10Subsidiary.fm] SR-MV30U_00.book Page 84 Tuesday, March 30, 2004 5:46 PM 84 EN TROUBLESHOOTING Initializing (DVD Deck Only) Malfunction occurs on the unit. ]Press 1 to turn off the unit, press and hold 1, then press 8 for two seconds or more. Other Problems The image of the TV broadcast appears distorted on the TV screen. For RF/AV/S-VIDEO connection ]Press PROGRESSIVE SCAN for 3 or more seconds so that the Video output indicator ( ) lights off on the front display panel.
Filename [SR-MV30U_10Subsidiary.fm] SR-MV30U_00.book Page 85 Tuesday, March 30, 2004 5:46 PM Masterpage:Right+ TROUBLESHOOTING EN PLUSCODE NO. ERROR CONFIRM PLUSCODE NO. THEN RETRY COPY PROHIBITED CAN NOT PLAY ● An invalid VCR Plus+ number has been input. (墌 pg. 41) ● The unit has detected invalid contents at the start or in the middle of playback.
Filename [SR-MV30U_10Subsidiary.fm] SR-MV30U_00.book Page 86 Tuesday, March 30, 2004 5:46 PM 86 EN Masterpage:Left0 GLOSSARY 8 Aspect ratio 8 Multiangle The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs is 4:3, and that of wide-screens is 16:9. By recording multiple scenes progressing at the same time in a single title, the user can select view angles. This feature is called the multiangle function.
Filename [SR-MV30U_10Subsidiary.fm] SR-MV30U_00.book Page 87 Tuesday, March 30, 2004 5:46 PM Masterpage:Right0 SPECIFICATIONS EN 87 GENERAL VIDEO/AUDIO (VCR Deck) Power requirement AC 120 Vd, 60 Hz Power consumption Power on: 46 W Power off: 16.5 W Temperature Operating: 5°C to 35°C (41°F to 95°F) Storage: –20°C to 60°C (–4°F to140°F) Operating position Horizontal only Dimensions (WxHxD) 435 mm x 96 mm x 347 mm (17-3/16" x 3-13/16" x 13-11/16") Weight 6.2 kg (13.
Filename [SR-MV30U_10Subsidiary.fm] Masterpage:Left0 SR-MV30U_00.
Filename [SR-MV30U_10Subsidiary.fm] Masterpage:Right+ SR-MV30U_00.
Filename [SR-MV30U_10Subsidiary.fm] Masterpage:Left+ SR-MV30U_00.
Filename [SR-MV30U_11IX.fm] Masterpage:Right0 SR-MV30U_00.book Page 91 Tuesday, March 30, 2004 5:46 PM LIST OF TERMS EN 91 A P A-B Repeat Playback ................................................ 34 Accidental erasure prevention .................................... 50 Adjusting The Picture Quality ..................................... 35 Angle Selection ........................................................ 28 Audio Channel Selection ...........................................
Filename [SR-MV30U_12Cov4.fm] SR-MV30U_12Cov4.
