DVD DIGITAL THEATER SYSTEM TH-A10 INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No. LVT0457-001A [ J] TH-A10[J]Cover/1 1 00.2.
Warnings, Cautions and Others CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Table of Contents Getting Started ........................................................................................... 2 Important cautions ........................................................................ 2 Safety precautions ......................................................................... 2 Checking the supplied accessories ................................................ 2 System outline ............................................................................................
Getting Started Important cautions Installation of the unit • Select a place which is level, dry and neither too hot nor too cold between 5°C and 35°C (41°F and 95°F). • Leave sufficient distance between the unit and the TV. • Do not use the unit in a place subject to vibrations. Checking the supplied accessories Check to be sure you have all of the following items, which are supplied with the unit. The number in the parentheses indicates quantity of the pieces supplied.
System outline This system consists of the center unit containing a DVD player, a radio, and a pre-amp, as well as the powered sub-woofer, the center speaker, and four satellite speaker units. It provides a fully functional DVD theater system by simply connecting to a TV set.
Installation To attach non-slip rubbers to the center speaker Attach the supplied non-slip rubbers at three points on the bottom of the center speaker. To hang satellite speakers from the wall Use the supplied bracket to fix satellite speakers to the wall. CAUTION: ATTACHING THE BRACKETS ON THE WALL When attaching the brackets on the wall, have them attached to the wall by a qualified person.
About discs Playable disc types Disc structure Playable and non-playable disc types are as follows: Playable discs ——————————————— DVD VIDEO Video CD Audio CD A DVD disc is comprised of “titles”, while an Audio CD or Video CD is comprised of “tracks”. Each title may be divided into some “chapters”. For example, if a DVD disc contains some movies, each movie, each movie may have its own title number, and each movie may be divided into some chapters.
Connections Connecting the FM and AM antennas FM antenna connections ——————————— To connect the powered sub-woofer Use the supplied system cable to connect the powered sub-woofer (SP-PWA10). Center unit (XV-THA10) Ensure that the £ mark on the plug faces upwards. A. Using the supplied FM antenna The FM antenna provided can be connected to the FM 75Ω COAXIAL terminal as temporary measure. B.
To connect speakers Connect the satellite speakers and center speaker to the terminals on the powered sub-woofer using the speaker cords supplied. Labels are attached to the speaker cords to indicate the speaker and terminal to which each is to be connected. • The four satellite speakers may be used at either front or rear. • Ensure that the left and right speakers are connected to left and right respectively, and that they are connected with the correct polarity (+ve, –ve).
Connections Connecting Audio/Video Components Video component connections ————————— You can connect the following audio/video components to this system. Refer also to the manuals supplied with your components. Audio Components: Cassette deck or MD recorder* Video Components: TV or DBS tuner* VCRs Use the cable with RCA pin plugs (not supplied). Connect the white plug to the audio left jack, the red plug to the audio right jack, and the yellow plug to the composite video jack.
Connections TV audio or DBS tuner TV sound DBS tuner Note: • When connecting the DBS tuner to the TV SOUND/DBS jacks, change the source name, which will be shown on the display when selected as the source, to “DBS”. See page 17 for details. Digital connections ————————————————————————————————————— The center unit has three digital input terminals (one digital coaxial terminal and two digital optical terminals) and one digital output terminal (a single digital optical terminal).
Connections Connecting the power cord Putting batteries in the remote control Before plugging the center unit and powered sub-woofer into an AC outlets, make sure that all connections have been made. Plug the power cord into an AC outlet. The red STANDBY lamp on the center unit lights when the power cord is plugged in. Before using the remote control, put two supplied batteries first. When using the remote control, aim the remote control directly at the remote sensor on the center unit.
Parts Identification Become familiar with the buttons and controls on the unit before use. Refer to the pages in parentheses for details. Center unit ——————————————————————————————————————— Front panel 1 2 3 p 1 POWER buftton and STANDBY lamp (16) 2 Remote sensor (10) 3 Disc tray (22) 4 DVD CONTROL buttons (22~24) 5 VOLUME +/ – button (16) 6 DSP MODE /INPUT ATT.
Parts Identification Remote controls ——————————————————————————————————————— Primary remote control Secondary remote control 1 w 2 e r 3 4 5 6 7 8 9 1 8 2 t y u i p o q ; a 3 4 5 9 p 6 7 s 1 2 3 4 5 6 7 8 9 p q w e r t y u i o ; a s SLEEP button (20) ANALOG/DIGITAL INPUT button (18) TITLE button (24) SUBTITLE button (29) MAIN ON SCREEN button (39) DVD ON SCREEN button (26, 46) MENU button (24) Cursor and ENTER buttons THEATER POSITION button (31) TV VOL +, – button (56) TV/VIDEO butt
Principles of operation The system may be operated via the remote control or the buttons on the center unit, or via the menu on the screen. Operation with the remote control Select the appropriate mode for the remote control when using the primary or secondary remote control is used for operation. The remote control mode is selected by pressing the source selecting buttons. Press DVD : The number buttons and operating buttons operate in the DVD mode, enabling operation of the DVD, audio CD, and video CD.
Principles of operation To operate via the on-screen menu When using the on-screen menu, first display it and then use the primary or secondary remote control unit cursor buttons (2/3/5/∞), the number buttons, and the ENTER button. Displaying the on-screen menu ————————————————————————————————— The method and conditions for display differ with the on-screen menu. The individual functions are described below.
Principles of operation On-screen menus —————————————— On-screen menus for using discs ———————— This system supports the following on-screen menus. The disc status and items are displayed as follows on the on-screen menus for using the disc.
Basic operations To turn TV power ON and OFF The basic operations for this system are as follows. IMPORTANT Check that remote control mode selector is set to the current position when using the primary remote control: Set to “AUDIO/TV/VCR” to operate an audio system, TV, or VCR. Set to “CATV/DBS” to operate a CATV converter or DBS tuner. The system will not operate normally while in CATV/DBS mode. JVC TVs may be used as is with the primary and secondary remote controls.
Basic operations Muting the sound On the front panel: Primary remote control only: MUTING SOURCE Press MUTING to mute the sound through all speakers connected. “MUTING” appears on the display window and volume turns off. To restore the sound, press MUTING again so that “OFF” appears on the display. • Pressing VOLUME +/– also restores the sound. Selecting the source to play Selected source name appears Press SOURCE until the source name you want appears on the display.
Basic operations Selecting the analog or digital input mode When you have connected some components such as MD recorder, the DBS tuner and so on, using digital terminals (see page 9), you need to change the input mode for these components to the digital input. You can choose digital sound from the following sources: “MD”, “DBS”, “AUX”. To return to analog audio 1. Select a digital source to return to analog audio. Select from “MD DIGITAL”, “AUX DIGITAL”, or “DBS DIGITAL”. 2.
Basic operations When a decode mode which differs from the type of disc being played is selected Insert a DVD disc in the center unit to display the type of audio being played in the Decode mode indicator in the display window. Audio cannot be played if a decode mode which differs from the displayed mode is selected. The selected decode mode flashes to indicate that the selected decode mode does not allow audio playback.
Basic operations Using the DSP Modes The lamp display indicates the type of disc (DVD or CD) currently playing as follows. With Dolby digital 5.1 ch or DTS digital 5.1 ch surround The built-in Surround Processor provides two types of the DSP (Digital Signal Processor) mode — Surround mode and DAP (Digital Acoustic Processor) mode. Surround modes ——————————————— With this system, you can use two types of the Surround mode.
Basic operations THEATER: LIVE CLUB: Gives the feeling of a large theater. Gives the feeling of a live music club with a low ceiling. Gives a throbbing bass beat. Gives clear vocal and the feeling of a concert hall. Give the spacious feeling of a pavilion with a high ceiling. DANCE CLUB: HALL: PAVILION: Notes: • The DSP modes have no effect on monaural sources. • The DOLBY DIGITAL indicator lights up when the signals encoded with Dolby Digital come into the system.
Using the DVD player and represent disc types. To play a disc On the front panel 3 2 1. Switch the TV on and display video from this system. Set the TV input to video 1 (or video 2 or 3). 2. Insert the disc. 1 Press 0 *on the center unit to open the disc tray. Change the playback source to DVD. 2 Place the disc in the tray. With the playback side (non-label side) down. To insert an 8 cm disc, place it in the inner recess. Notes: • The unit can playback DVD VIDEO, Audio CD, and Video CD discs only.
On-screen guide icons ———————————— During DVD playback, you may see icons displayed over the picture. These have the following meanings. Displayed at the beginning of a scene recorded from multiple angles (see page 30). Fast forward and rewind 7 During playback From the remote controls: Primary remote control Secondary remote control Displayed at the beginning of a scene recorded with multiple audio languages (see page 32).
Using the DVD player Selecting playback from the DVD menu On the front panel: 4, ¢ DVD discs generally have their own menus which show the disc contents. These menus contain various items such as titles of a movie, names or songs, or artist information, and display them on the TV screen. You can locate a desired scene by using the menu. 7 Insert the DVD disc. Press ¢ or 4.
Using the DVD player Selecting the location to view from the video CD menu When playing back Video CDs recorded with PBC (playback control), a list of the recorded contents may appear on the TV screen as a menu. The location to view may be conveniently called up from this menu screen. 7 When the menu appears on the TV screen during playback with PBC.
Using the DVD player To play from the beginning of a title, chapter, or track 2. Use CURSOR 5/∞ to move the pointer to [CHAP. SEARCH], then press ENTER. The color of [CHAP. SEARCH] changes and “GO TO CHAPTER:” appears in the message area. The beginning of previous or later chapters or tracks may be skipped. 7 For DVD: During playback For Audio CD: Any time For Video CD: During playback without PBC function Message area Common: Primary remote control Secondary remote control 3.
Using the DVD player 1. Press DVD ON SCREEN. The on-screen display appears on the TV screen. 2. Use CURSOR 5/∞ to move the pointer to [TIME SEARCH], then press ENTER. The color of [TIME SEARCH] changes and “GO TO:” appears in the message area. (for DVD) To select the screen for playback from the digest screen [DIGEST] The unit can display the opening scene of each title or chapter on a DVD or each track of a Video CD.
Using the DVD player 3. 2. Press ENTER. The unit starts playback from the selected title, chapter or track. To return to the regular display: Press DIGEST. Hold down FF/¢ or 4/REW for more than 2 seconds. Hold down FF/¢ will playback your selection in slow motion, starting from the pause frame. Hold down 4/REW will playback your selection in reverse slow motion (DVD only).
Using the DVD player Zooming a scene [ZOOM] Changing the Subtitle Language [SUB TITILE] 7 During playback or while paused. From primary remote control only: 1 Some DVD discs contain subtitles. With such discs, you can choose which kind of subtitles to display (or turn off subtitles entirely). At the beginning of subtitled parts, appears on the TV screen. Using the SUBTITLE button ——————————— 7 During playback From primary remote control only: 2 1. 1 Press ZOOM.
Using the DVD player 2. 3. 3. Use CURSOR 5/∞ to move the pointer [SUBUTITLE]. Use CURSOR 2/3 to select the desired audio language or sound. Each time you press CURSOR 2/3, the audio language or sound changes. Use CURSUR 2/3 to select the desired subtitle. Each time you press CURSOR 2/3, the subtitle changes. Total number Example: Total number Example: Selected subtitle Selected auio umber Selected auio language Selected subtitle number To turn off the on-screen display Press DVD ON SCREEN.
Using the DVD player Viewing from Multiple Angles [ANGLE] You can enjoy a variety of scene angles if the DVD disc contains “multi-angle” parts, where multiple cameras were used to shoot the same scene from different angles. You can select one of these viewing angles from the normal screen or on-screen display. appears on the TV At the beginning of “multi-angle” parts, screen. Using the ANGLE button ———————————— 2. 3. Use CURSOR 2/3/5/∞ to select the desired angle. Press ENTER.
Using the DVD player Selecting the Picture Character [THEATER POSITION] You can select the quality of the image from among four options (OFF, 1, 2, and 3) according to the type of programming, picture tone or personal preferences. Repeating a current title, chapter or track, or all tracks [REPEAT] 7 For DVD: During playback For Audio CD: Any time For Video CD: During playback without PBC function.
Using the DVD player To quit repeat playback Move the pointer to [REPEAT] and press ENTER repeatedly until the [REPEAT] display turns off. To quit A-B repeat playback Press STOP. The unit stops playback and quits A-B repeat mode. Quitting A-B repeat mode without stopping playback Move the pointer to [A-B REPEAT] and press ENTER. Tu turn off the on-screen display Press DVD ON SCREEN. Notes: • Repeat play function cannot be used during Video CD playback with PBC function.
Using the DVD player Checking the Disc Time [TIME SELECT] Programming the Playing Order of the Tracks [PROGRAM] You can choose the displayed time mode for an Audio or Video CD disc in the display on the front panel and in the on-screen display. You can play tracks on an Audio CD or Video CD in the desired order.
Using the DVD player 4. Press PLAY to start program play. When all of the programmed tracks have finished playback, the unit stops but the program remains. To turn off the on-screen display Press DVD ON SCREEN. Quitting programmed playback Move the pointer to [PROGRAM] and press ENTER. [PROGRAM] will turn to its original color, and the program contents will be deleted. Note: • When playing an Audio CD or Video CD, if less than 16 tracks have been programmed, it is possible to add tracks during playback.
Receiving radio broadcasts You can browse through all the stations or use the preset function to go immediately to a particular station. IMPORTANT When using the primary remote control, check to see if its remote control mode selector is set to the correct position: To operate this center unit, set it to “AUDIO/TV/VCR” (excpt when selecting the DBS tuner as the source). Once a station is asssigne to a channel number, the station can be quickly tuned. You can preset up to 30 FM and 15 AM stations.
To tune in a preset station ——————————— From primary remote control: 1. Selecting the FM reception mode When an FM stereo broadcast is hard to receive or noisy 1 You can change the FM reception mode while receiving an FM broadcast. • You can store the FM reception mode for each preset station. 2 From primary remote control: Press FM/AM. • Each time you press the button, the band alternates between FM and AM. 2. Press the number buttons (1~10, +10) to select a preset channel number.
Performing miscellaneous settings It is possible to perform a variety of settings from the on-screen display. The two on-screen displays used for settings are the AV amplifier settings on-screen display and the DVD settings on-screen display. Only the primary remote control can be used on the MAIN MENU, SOUND MENU, and SPEAKER MENU found on AV amplifier settings screen. Either the primary or secondary remote can be used on the DVD MENU found on the DVD settings screen.
MAIN MENU Settings Use the primary remote control to perform MAIN MENU settings. Buttons used ———————————————— MAIN ON SCREEN and the 2/3/5/∞ cursors. ON SCREEN LANGUAGE The on-screen language is the language used in the display for the MAIN MENU, SOUND MENU, SPEAKER MENU, and DVD MENU. The on-screen language is set to ENGLISH. The ON SCREEN LANGUAGE option is not available on this system. ON SCREEN LANGUAGE MAIN ON SCREEN 2/3/5/∞ cursors Setting the SLEEP TIMER (See page 20) 1. Open the MAIN MENU.
MAIN MENU Settings Changing the DECODE MODE 3. (See page 18) This option is used to change the digital audio decode mode. The default setting of [AUTO/PCM] is recommended for regular use. When the playback source is DVD, you may select a DECODE MODE. 1.
SOUND MENU Settings Use the primary remote control to perform SOUND MENU settings. Buttons used ———————————————— MAIN ON SCREEN and the 2/3/5/∞ cursors. Adjusting the balance Adjusting the front speaker balance. 1. Open the SOUND MENU. See “Opening the SOUND MENU”. 2. Move the pointer to BALANCE using the 5/∞ cursors. 3. Use the 2/3 cursors to adjust the balance. MAIN ON SCREEN 2/3/5/∞ cursors Press 2 to shift the balance to the left. Press 3 to shift the balance to the right.
SOUND MENU Settings Adjusting input signal (See page 19) When using the DSP mode effect during playback from an analog device, the sound will occasionally be distorted due to a overlystrong input signal. In these instances, it is possible to adjust the level of the input signal. Only input signals from analog devices (TV SOUND, VCR, TAPE, AUX, MD, DBS) may be adjusted in this way. 1. 3. 1. Open the SOUND MENU. See page 41, “Opening the SOUND MENU”. 2.
SPEAKER MENU Settings Use the primary remote control to perform speaker settings with the on-screen SPEAKER MENU. Buttons used ———————————————— MAIN ON SCREEN, the 2/3/5/∞ cursors, and ENTER. Opening the SPEAKER MENU 1. Stop DVD image playback on the TV screen. Select a playback source other than the tuner. If the playback source is set to DVD, press STOP to quit playback. 2. Press MAIN ON SCREEN. The MAIN MENU will be displayed. 3. MAIN ON SCREEN 2/3/5/∞ cursors, and ENTER 4.
SPEAKER MENU Settings Playing a test tone 4. Use the 2/3 cursors to select SPEAKER SIZE. 5. Set speaker size. When you wish to play a test tone, make sure the sound mode is set to “SURROUND ON” or “THEATER.” The test tone will not play in other modes. 1. Open the SPEAKER MENU. See page 43, “Opening the SPEAKER MENU”. 2. 3. 4. Note icon Selected parameter Move the pointer to TEST TONE using the 5/∞ cursors. Press ENTER.
SPEAKER MENU Settings Setting speaker level 1. Adjusting delay time The delay time for the center speaker and rear speakers is calculated by comparing the distance between the rear/center speakers and the listening point with the distance between the front speakers and the listening point. Open the SPEAKER MENU. See page 43, “Opening the SPEAKER MENU”. 2. 3. Switch the speaker mode to EXPERT. 1. Move the pointer to the speaker selection box using the 5/∞ cursors.
DVD MENU Settings Use the primary or secondary remote control to perform DVD settings with the on-screen DVD MENU. Buttons used ———————————————— DVD ON SCREEN, and the 2/3/5/∞ cursors. Opening the DVD MENU 1. Change source to DVD, and stop playback. 2. Press DVD ON SCREEN. Primary remote control When a Video CD or Audio CD is inserted, press 0 on the center unit to open the disc tray. The DVD MENU will be displayed. DVD ON SCREEN 3.
Choosing audio language Choosing subtitle language Some DVD discs feature audio playback in multiple languages. With these discs, it is possible to set the default language for audio playback. Some DVD discs feature subtitle display in multiple languages. With these discs, it is possible to set the default language for subtitle display. 1. 1. Open the DVD MENU. See page 46, “Opening the DVD MENU”. 2. 3. Move the pointer to AUDIO LANGUAGE using the 5/∞ cursors.
DVD MENU Settings Select monitor type Most movie DVD discs are recorded for wide-screen TVs with a height/width ratio of 16:9. It is possible to optimize playback of these wide-screen TV images for viewing on a regular TV with a height/width ratio of 4:3. 1. Open the DVD MENU. See page 46, “Opening the DVD MENU”. 2. 3. Screen saver settings Set the screen saver to prevent screen burn. 1. Open the DVD MENU. See page 46, “Opening the DVD MENU”. 2.
Limiting playback by children This function restricts playback of DVD discs which contain violent (and other) scenes according to the level set by the user. For example, if a movie which includes violent scenes supports the parental lock feature, such scenes which you do not want to let children view can be cut or replaced with other scenes. 3. Use CURSOR 5/∞ to move the pointer to “Set Level”, then use CURSOR 2/3 to select the parental lock level.
Limiting playback by children To change the settings ———————————— 7 While a DVD disc is stopped or no disc is inserted 1. Press ENTER while holding down STOP. The Parental Lock on-screen display appears on the TV screen. 2. Enter your current 4-digit password using the number buttons (0 to 9) and press ENTER. To temporarily release the Parental lock When you set the parental level strictly, some discs may not be played back at all.
Care and handling of discs How to handle discs When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped, the imagesand sound will not be picked up correctly, and such a discmay cause the player to malfunction. Label side ———————————————————————————————————————— Do not damage the label side, stick paper to or use any adhesive on its surface.
AV COMPU LINK Remote Control System The AV COMPU LINK remote control system allows you to operate JVC video components (TV and VCR) through the center unit. To use this remote control system, you need to connect the video components you want to operate, follow the diagrams below and the procedure on the next page.
1. 2. If you have already plugged your VCR, TV, and center unit into the AC outlets, unplug their AC power cords first. Connect your VCR, TV, and center unit as follows, using the cables with the monaural mini-plugs. • See “CONNECTIONS 1” on the previous page. 3. Connect the audio input/output jacks on VCR, TV, and center unit using the cables with RCA pin plug • See pages 8 and 9. 4.
COMPU LINK Remote Control System The COMPU LINK remote control system allows you to operate JVC audio components through the remote sensor on the center unit. To use this remote control system, you need to connect JVC audio components through the COMPU LINK-3 (SYNCHRO) jacks (see below) in addition to the connections using cables with RCA pin plugs (see pages 8 and 9). • Make sure that the AC power cords of these components are unplugged before connection.
Operating JVC’s Audio/Video Components You can operate JVC’s audio and video components with this system’s remote control, since control signals for JVCcomponents are preset in the remote control. IMPORTANT: To operate JVC’s audio components using this remote control: • You need to connect JVC audio components through the COMPU LINK-3 (SYNCHRO) jacks (see page 54) in addition to the connections using cables with RCA pin plugs (see pages 8 and 9).
Operating JVC’s Audio/Video Components Cassette deck ———————————————— TV ———————————————————— After pressing TAPE/MD or TAPE/MD CONTROL (with the remote control mode selector set to “AUDIO/TV/VCR”), you can perform the following operations on a cassette deck: You can always perform the following operations (with the remote control mode selector set to “AUDIO/TV/VCR”): PLAY 1 ¡ STOP PAUSE ¶ REC : : : : : : Starts playing. Fast winds the tape from right to left. Fast winds the tape from left to right.
Operating Other Manufacturers’ Video Equipment This remote control supplied with the receiver can transmit control signals for other manufacturers’ VCRs, TVs, CATV converters and DBS tuners. By changing the transmittable signals from preset ones to the other manufacturers’, you can operate the other manufacturer’s components using this remote control. When operating the other manufacturers’ components, refer also to the manuals supplied with them.
Operating Other Manufacturers’ Video Equipment To change the transmittable signals for operating a CATV converter or DBS tuner —————————— To change the transmittable signals for operating another manufacturer’s VCR —————————— 1. 2. 3. 4. 1. 2. 3. 4. Set the remote control mode to “CATV/DBS.” Press and hold TV/CATV/DBS POWER. Press TV/DBS. Enter manufacturer’s code (three digits) using buttons 1–9, and 0. See the list on page 60 to find the code. Examples: For a JVC product, press 7, 7, then 5.
Troubleshooting Use this chart to help you solvi daily operational problems. If there is anyproblem you cannot solve, conect your JVC service center. POSSIBLE CAUSE PROBLEM SOLUTION Power does not come on. The power cord. Insert the plug into the socket. Power is not supplied to the powered sub-woofer The power cord has been pulled out of the AC outlet. The system cable is not connected. Press the power button on the center unit to switch power OFF, and then press it again to switch power ON.
Specifications Center unit (XV-THA10) Audio section Dynamic Range 97 dB Total Harmonic Distortion 0.007 % Output Level 2.0 V RMS Video section Horizontal Resolution 500 lines Signal-to-Noise Ratio 60 dB Output Level S-video-Y: 1.0 Vp-p/75 ohms S-video-C: 0.286 Vp-p/75 ohms Composite: 1.0 Vp-p/75 ohms Tuner section Tunig Range FM: 87.5 MHz to 108.0 MHz AM: 530 kHz to 1,710 kHz Usable Sensitivity FM: 12.8 dbf (1.
Appendix A: Table of languages and their abbreviations When you select the subtitle language or sound, the languages shown below are displayed as abbreviations. To select the desired language, select the abbreviation corresponding the language you want to.
Appendix B: Country code list for parental lock This list is used for the parental Lock operation. For details, see page 49.
TH-A10[J]7/1 LI Liechtenstein PE Peru TJ Tajikistan LK Sri Lanka PF French Polynesia TK Tokelau LR Liberia PG Papua New Guinea TM Turkmenistan LS Lesotho PH Philippines TN Tunisia LT Lithuania PK Pakistan TO Tonga LU Luxembourg PL Poland TP East Timor LV Latvia PM Saint Pierre and TR Turkey LY Libyan Arab Jamahiriya Miquelon TT Trinidad and Tobago MA Morocco PN Pitcairn TV Tuvalu MC Monaco PR Puerto Rico TW Taiwan, Province of MD Moldova, Republic
QUALITY SERVICE HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE : 1-800-537-5722 http://www.jvcservice.com Dear customer: In order to receive the most satisfaction from your purchase, read the instruction booklet before operating the unit. In the event that repair is necessary, or for the address nearest your location, please refer to the factory service center list below or within the Continental United States, Call 1-800-537-5722 for your authorized servicer.
LIMITED WARRANTY CONSUMER VIDEO 1-90 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP from the date of original retail purchase for the period as shown below. (“The Warranty Period.”) PARTS LABOR 1 YR 90 DAYS THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY(50) UNITED STATES, THE DISTRICT OF COLUMBIA AND IN COMMONWEALTH OF PUERTO RICO.
VICTOR COMPANY OF JAPAN, LIMITED EN TH-A10[J]Cover/1 V J 4 00.2.
