Manual

TV connection

The S-video cord and the component video cord are not supplied with this system.

Use the cords supplied with another components or purchase them at an electric appliance store.

B Video cord (supplied)

k t.

D S-video cord (not supplied)

kt.

B Component video cord (not supplied)

You can select one of three connection types--[], [] , and r_.

• If your TV has S-video (Y/C-separation) and/or component video

(Y, PB, PR) jacks, connect them using an S-video cord (not

supplied) [] and/or component video cord (not supplied) r_.

By using these jacks, you can get a better picture quality--in the

order: Component video > S-video > Composite video.

• If you use the S-video cord to connect the TV, you select the

video signal type correctly. See "Picture Menu" on page 52.

• If your TV supports the progressive video input, you can enjoy a

high quality picture by making the progressive scanning mode

active (see page 11.)

÷ [E__ _-

I I

Now, you can plug the power cord of the center unit into the AC outlet. I

Notes:

• Keep the power cord away from the connecting cords and the antenna cords. The power cord may cause noise or screen interference.

• Connecting to a TV through a VCR, or to a TV with a built-in VCR, may cause distortion of picture.