Manual

This manual mainly explains operations using the buttons on
the remote control. You can also use the buttons on the center
unit if they have the similar names (or marks) as those on the
remote control.
If operations using the center unit are different from those
using the remote control, they are then explained.
JVG
RM-STHA35J
DVD THEATER SYSTEM
ml=Jl_
For in-depth information about DVD operations, see
pages 24 to 33.
Before turning on the system, turn on your TV and select the correct
video input. (See the manual supplied with your TV.)
When you use a JVC's TV, you can turn on your TV by pressing
TV Oil on the remote control, and select the video input by
pressing TV/VIDEO. (If your TV is not a JVC's, see "Operating
Other Manufacturers' TV" on page 57.)
For changing the OSD messages--the information on the TV
screen--into the desired language, see" Language Menu" on
pages 51.
Press AUDIO OIl (or ©/I STANDBY/ON on the front
panel).
AUDIO
The STANDBY lamp goes ott" and the illumination lamp
on the center unit lights up. The source indication
%
selected previously appears on the display.
Press DVD.
The source changes to DVD.
On the front panel ONLY:
Press _ to open the disc tray, then place a DVD
correctly with its label side up.
CORRECT INCORRECT
DO NOT use the disc stabilizer.
Press I_.
The disc tray closes. "READING" appears for a
while.
You can also start playback by closing the disc
tray using _ on the front panel.
From the remote control :
To increase the volume,
press and hold AUDIO VOL +.
To decrease the volume,
press and hold AUDIO VOL -.
On the front panel :
To increase the volume,
turn VOLUME control clockwise.
To decrease the volume,
turnVOLUME control counterclockwise.
CAUTION:
Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
Notes:
Bypressing AUDIO VOL + or- repeatedly, you can adjust the
volume level step by step.
The volume level can be adjusted within 64 steps--
"MIN (minimum)," 01 to 62, and "MAX (maximum)."
If you have turned off the un# with the volume level set at more than
level "25," the volume level will be automatically set at level "25" next
time you tum on the unit.
12