Manual

Basic VCD/CD
J
Press DVD.
On the front panel ONLY:
Press _ to open the disc tray, then place a disc
correctly with its label side up.
CORRECT INCORRECT
• When using a CD single (8 cm), place it on the inner circle of the
disc tray.
• Continued use of irregular shape CDs (heart-shape, octagonal,
etc.) can damage the center unit.
• DO NOT use the disc stabilizer.
• SVCD can be operated by using the VCD operation
procedure.
• For in-depth information about VCD/CD operations,
see pages 24, 25, and 34 to 39.
Before turning on the system, turn on your TV if necessary and
select the correct video input. (See the manual supplied with your
TV.)
• When you use a JVC's TV, you can turn on your TV by pressing
TV Oil on the remote control, and select the video input by
pressing TV/VIDEO. (If your TV is not a JVC's, see "Operating
Other Manufacturers' TV" on page 57.)
• For changing the OSD messages--the information on the TV
screen--into the desired language, see" Language Menu" on
pages 51.
Press AUDIO 0/I
(or Oil STANDBY/ON on the front panel).
The STANDBY lamp goes oil"and the illumination lamp
on the center unit lights up. The source indication selected
previously appears on the display.
Press I_.
The disc tray closes. "READING" appears for a while.
• You can also start playback by closing the disc tray
using _ on the front panel.
From the remote control :
To increase the volume,
press and hold AUDIO VOL +.
To decrease the volume,
press and hold AUDIO VOL -.
On the front panel :
To increase the volume,
turnVOLUME control clockwise.
To decrease the volume,
turnVOLUME control counterclockwise.
CAUTION:
Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
Notes:
• Bypressing AUDIO VOL + or- repeatedly, you can adjust the
volume level step by step.
• The volume level can be adjusted within 64 steps--
"MIN (minimum)," 01 to 62 and "MAX (maximum)."
• If you have turned off the un# with the volume level set at more than
level "25," the volume level will be automatically set at level "25" next
time you tum on the unit.
14