Manual

,O
To turn off the sounds temporarily
From the remote control ONLY:
Press MUTING.
To restore the sound, press MUTING again.
• Pressing AUDIO VOL + or - also restores the sound.
You can enjoy Dolby Pro Logic II mode and DSP modes.
Dolby Pro Logic II--Pro Logic II Movie and Pro
Logic II Music
ToactivateProLogicII modes
Press SURROUND.
The current Pro Logic II mode appears on the display
for a while.
• Each time you press the button, Pro Logic II mode
changes as follows:
" PL II MUSIC = PL II MOVIE --]
/
PL II OFF
• When Dolby Pro Logic II mode is activated, the rlrlPRO LOGIC
II indicator lights up on the display.
- For in-depth information about Dolby Pro Logic II modes, see
"Creating Realistic Sound Fields" on pages 21 to 22.
DSP modes--CONCERT, STADIUM, HALL,
THEATER, LIVE HOUSE
DSP modes take effect only when you enjoy a disc recorded using
Linear PCM.
ToactivateDSPmodes
Press DSP. DSP
The current DSP mode appears on the display tbr a
while.
• Each time you press the button, DSP mode changes
as follows:
- For in-depth information about DSP modes, see "Creating
Realistic Sound Fields" on pages 21 to 22.
Press • twice.
Playback stops completely. (l&
• This system can memorize the end point even when
you press • once. When you start playback again by
pressing I_, playback begins from where it has been stopped--
Resume play.
To remove the loaded disc
Press _.
"OPEN" appears on the display and the disc tray comes
out.
To close the disc tray, press _ again.
To prohibit disc ejection
On the front panel ONLY:
Press and hold I_/ll and I<< for more than
3 seconds.
"LOCKED" appears on the display, and the
disc tray is locked.
To cancel the prohibition, press and hold
I*/11 and I<_ for more than 3 seconds.
"UNLOCK" appears on the display, and the
disc tray is unlocked.
To turn off the power (into standby)
Press AUDIO Oil (or AU_!O
O/I STANDBY/ON on the front panel).
The illumination lamp goes oil"and the STANDBY lamp
lights up.
• If you press AUDIO Oil (or O/I STANDBY/ON on the front
panel) while the disc tray is kept open, the disc tray closes
automatically, then the system is turned oil'.
• A small amount of power is consumed even in standby mode. To
turn the power off completely, unplug the AC power cord.
Note:
Before activating the Surround or DSP mode, adjust the speaker
setting to bring out the best performance from this system.
For in-depth information about adjusting the speaker setting, see
"Setting Menu" on pages 53.
15