Manual

On the front panel: SOURCE
Press SOURCE repeatedly until the desired band _.
(TUNER FM or TUNER AM) appears on the
display.
The last received station of the selected band is tuned into
• Each time you press the button, the source changes as tbllows:
--_'DVD _ TUNER FM _TUNER A_
DIGITAL IN "_ ANALOG IN
From the remote control :
To increase the volume,
press and hold AUDIO VOL +.
To decrease the volume,
press and hold AUDIO VOL -.
On the front panel :
To increase the volume,
turn VOLUME control clockwise.
To decrease the volume,
turn VOLUME control counterclockwise
CAUTION:
Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
For in-depth information about tuner operations, see
"Tuner Operations" on pages 48 to 49.
Press AUDIO 011 (or O/I STANDBY/ON on the front
panel).
The STANDBY lamp goes off and the illumination lamp
lights up on the center unit.
The source indication selected previously appears on the
display.
Notes:
• Bypressing AUDIO VOL + or- repeatedly, you can adjust the
volume level step by step.
• The volume level can be adjusted within 64 steps--
"MIN (minimum)," 01 to 62 and "MAX (maximum)."
• If you have turned off the un# with the volume level set at more than
level "25," the volume level will be automatically set at level "25" next
time you tum on the unit.
To turn off the sounds temporarily
From the remote control ONLY:
Press MUTING.
To restore the sound, press MUTING again.
• Pressing AUDIO VOL + or - also restores the sound.
From the remote control:
Press FM/AM.
The last received station of the selected band is tuned
into.
• Each time you press the button, the band alternates
between FM and AM.
From the remote control:
Press and hold TUNING UP or DOWN until
the station frequency starts changing
continuously on the display.
The system starts searching for a station.
DOWN-TUNING- UP
When a station of sufficient signal strength is tuned in, the system
stops searching, and the TUNED indicator lights up on the display.
On the front panel:
Press and hold _< or _ until the station frequency starts
changing continuously on the display.
16