Manual

Notes:

• When an FM stereo program is received, the STEREO indicator

also lights up.

• When you press the button repeatedly, the frequency changes step

by step.

To turn off the power (into standby) (((_/_

Press AUDIO (b/I (or Oil STANDBY/ON on the front

panel) again.

The illumination lamp goes off and the STANDBY lamp lights up.

• A small amount of power is consumed even in standby mode. To

turn the power off completely, unplug the AC power cord.

You can enjoy Dolby ProLogic IImode and DSP modes.

Dolby Pro Logic II--Pro Logic II Movie and Pro

Logic II Music

ToactivateProLogicII modes

Press SURROUND.

The current Pro Logic II mode appears on the display

for a while.

• Each time you press the button, Pro Logic II mode changes as

follows:

U PLIIMUSIC _ PLIIMOVIE--

PL II OFF

• When Dolby Pro Logic II mode is activated, the rlrlPRO LOGIC

II indicator lights up on the display.

- For in-depth information about Dolby Pro Logic II modes, see

"Creating Realistic Sound Fields" on pages 21 to 22.

DSP modes_CONCERT, STADIUM, HALL,

THEATER, LIVE HOUSE

ToactivateDSPmodes

Press DSP. DSP

The current DSP mode appears on the display for a

while.

• Each time you press the button, DSP mode changes as

tbllows:

[-----_l______Ds;V;_ 0U2 EI.-_EATI_LLz _O:C_T<__

- For in-depth information about DSP modes, see "Creating

Realistic Sound Fields" on pages 21 to 22.

Note:

Before activating the Surround or DSP mode, adjust the speaker

setting to bring out the best performance from this system.

For in-depth information about adjusting the speaker setting, see

"Setting Menu" on pages 53.