Manual

On the front panel:
Press SOURCE repeatedly until "ANALOG IN"
SOURCE
or "DIGITAL IN" appears on the display.
• Each time you press the button, the source
changes as follows:
DVD "--_ TUNER FM "--_ TUNER AM
J
DIGITAL IN = ANALOG IN 4--
2 Start playback on the external equipment.
• For in-depth information about the external equipment, see the
manual supplied for it
3
Adjust the Volume
From the remote control :
To increase the volume,
press and hold AUDIO VOL +.
To decrease the volume,
press and hold AUDIO VOL -.
On the front panel :
To increase the volume,
turn VOLUME control clockwise.
To decrease the volume,
turn VOLUME control counterclockwi
CAUTION:
Always set the volume to the minimum before starting any source.
If the volume is set at its high level, the sudden blast of sound
energy can permanently damage your hearing and/or ruin your
speakers.
You can enjoy sounds from the external equipment connected to the
OPTICAL DIGITAL IN terminal or ANALOG IN jacks on the rear
panel of the center unit.
I Select AUX as the source.
From the remote control:
Press AUX.
• Each time you press the button, the source
changes as follows:
ANALOG IN _ DIGITAL IN
ANALOG IN : Select this to enjoy the external equipment
connected to the ANALOG IN jacks.
DIGITAL IN : Select this to enjoy the external equipment
connected to the OPTICAL DIGITAL IN
terminal.
Notes:
• Bypressing AUDIO VOL + or - repeatedly, you can adjust the
volume level step by step.
• The volume level can be adjusted within 64 steps i
"MIN (minimum)," 01 to 62 and "MAX (maximum)."
• If you have tumed off the unit with the volume level set at more
than level "25," the volume level will be automatically set at level
"25"next time you turn on the unit.
To turn off the sounds temporarily
From the remote control ONLY:
Press MUTING.
To restore the sound, press MUTING again.
• Pressing AUDIO VOL + or - also restores the
sound.
18