Manual

• DSP (Digital Signal Processor) Modes
DSP modes have been designed to create important acoustic
surround elements.
The sound heard in a live house, a hall, a concert, a stadium, or a
theater consists of direct sound and indirect sound--early reflections
and reflections from behind. Direct sounds reach the listener directly
without any reflection. On the other hand, indirect sounds are
delayed by the distances of the ceiling and walls.
These indirect sounds are important elements of the acoustic
surround effects.
The following DSP modes are provided with this unit.
LIVE HOUSE Gives the feeling of a live music house with a
low ceiling.
HALL Gives clear vocal and the feeling of a concert
hall.
CONCERT Gives the feeling of a large hall designated
primarily for classical concert.
STADIUM Gives feeling of an outdoor stadium.
THEATER Gives the feeling of a theater.
These DSP modes can be used to add the acoustic surround effects
while reproducing stereo analog software, Linear PCM digital
software, or Dolby Surround encoded source and can give you a real
"being there" feeling.
Note:
On some source signals, DSP mode may not work sufficiently. In that
case, select another preferred DSP mode.
You can enjoy three kinds of surround_Digital Multichannel
Surround (Dolby Digital and DTS Digital Surround), Dolby Pro
Logic II and DSP modes.
• If you activate the surround mode not available, "INVALID"
appears on the display.
ForDolbyDiqitalor DTSDiqitalSurround
When playback source is encoded with Dolby Digital or DTS
Digital Surround, the system detects it and activate Multichannel
Surround automatically.
• When Dolby Digital is activated, the 11['1DIGITAL indicator lights
up on the display.
• When DTS Digital Surround is activated, the dl_ indicator lights
up on the display.
ForProLoqicII modes
Press SURROUND.
The current Pro Logic II mode appears on the display
for a while.
• Each time you press the button, Pro Logic II mode
changes as follows:
PL II MUSIC = PL II MOVIE --
PL II OFF
• When Dolby Pro Logic II mode is activated, the [']['] PRO LOGIC
II indicator lights up on the display.
ForDSPmodes
Press DSP. DSP
The current DSP mode appears on the display for a (("- -r_.
while.
--y.
• Each time you press the button, DSP mode changes as
follows:
-27 2 7 12".22°2222 2
Available surround according to the input signal format
©: Possible x:lmpossible
Surround
DSP
CONCERT
O
O
Multichannel
Surround
X
X
0
X
0
X
X
Pro Logic II
PLII Movie PLII Music
0 0
0 0
X X
0 0
X X
X X
X X
LIVE HOUSE HALL STADIUM THEATER
Analog © © © © ©
Linear PCM © © © © ©
Dolby Digital
__ Multichannel x x x x x --
.__
or)
"_ Dolby 2ch O O O O O O
t-
in
DTS Digital
Surround x x x x x --
DTS 2ch x x x x x O
MP3 x x x x x O
PL II OFF and
DSP OFF
(canceled)
22