Manual

• Still Picture/Fram_by-Frame Playback
You can advancethe still picture frame by frame while playing a
DVD.
From the remote control ONLY:
I Press I! once during playback.
A still picture appears on the TV screen.
II PAUSE
2 Press II repeatedly to advance the
picture frame by frame.
• Each time you press the button, the picture
advances frame by frame.
To resume normal play
Press _.
To exit from program play
From the remote control ONLY:
1) Press ENTER repeatedly to select "Off" in step 3 on page 31.
2) Press cursor A/V to select "OK", then ENTER.
To check the program contents
1) Press ON SCREEN.
2) Press cursor A/V to select "Mode"
3) Press ENTER repeatedly to select "Program" again even
though "Program" is selected in Step 2.
4) Press cursor A/V to select "OK", then ENTER.
The program menu appears on the TV.
To disappear program contents, press ON SCREEN twice.
To erase the stored program
1) Repeat steps I to 4 on page 31.
2) Press cursor _/-_/A/V to select "Clear All", then ENTER.
To modify the program
You can modify the program while the program menu screen is
shown on the TV screen.
• To erase a step: Press cursor _/-ql/A/V to select (highlight) an
title or chapter in unwanted step, then press CLEAR.
• To modify a step: Press cursor _/-ql/A/V to select (highlight) a
title or chapter you want to modify, then perform steps 5 to 8 on
page 31. (Before entering a new number, press CLEAR)
• To add a step: Press cursor _/-ql/A/V to select (highlight) an
empty program step, then perform steps 5 to 8 on page 31.
32