Instruction Manual

EN
EN - 13
TROUBLESHOOTING
To keep the warranty valid, never try to repair the system yourself. If you encounter problems
when using this unit, check the following points before requesting service.
Problem Solution
No power
• Ensure that the AC cord of the apparatus is properly connected.
• Ensure that there is power at the AC outlet.
• Press
(standby) button to turn the Soundbar on.
Remote control does
not work
• Before you press any playback control button, first select the
correct source.
• Reduce the distance between the remote control and the
Soundbar.
• Insert the battery with its polarities
/ aligned as indicated.
• Replace the battery.
• Aim the remote control directly at the sensor on the front of the
Soundbar.
No sound
• Make sure that the Soundbar is not muted. Press MUTE or +/-
(VOLUME) button to resume normal listening.
• Press
button on the Soundbar or on the remote control to
switch the soundbar to standby mode. Then press the button
again to switch the soundbar on.
• Ensure the audio setting of the input source (e.g. TV, game
console, DVD player, etc.) is set to PCM mode while using
digital (e.g. HDMI, OPTICAL, COAXIAL) connection.
• The Soundbar may not be able to decode all digital audio
formats from the input source. In this case, the Soundbar will
mute. This is NOT a defect.
• If using Bluetooth, ensure that the volume on your source
device is turned up and that the device is not muted.
I can’t nd the Bluetooth
name of this unit on my
Bluetooth device for
Bluetooth pairing
• Ensure the Bluetooth function is activated on your Bluetooth
®
device.
• Re-pair the Soundbar with your Bluetooth
®
device.
• The Soundbar has a Bluetooth
®
function that can receive
a signal within 8 metres. Keep a distance within 8 metres
between the Soundbar and your Bluetooth
®
device.
The Soundbar turns o󰀨
• When the Soundbar's external input signal level is too low, the
Soundbar will be automatically turn off after 15 minutes. Please
increase the volume level of your external device.