HT994SJ-A0_BUSAJJK DVD DIGITAL THEATER SYSTEM TH-G31 Consists of XV-THG31 and SP-THG51F, SP-THG61C and SP-THG50W TUNING TUNING For Customer Use: INSTRUCTIONS Enter below the Model No. and Serial No. which are located on the rear of cabinet. Retain this information for future reference. Model No. Serial No.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing.
Contents Introduction . . . . . . . . . . . . . . . . . . .2-5 About the Symbol Display . . . . . . . . . . . . . .2 Symbol Used in this Manual . . . . . . . . . . . . . . .2 Screen Saver . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .2 Handling Discs . . . . . . . . . . . . . . . . . . . . . . . .2 Storing Discs . . . . . . . . . . . . . . . . . . . . . . . . .2 Cleaning Discs . . . . . . . . . . . . . . . . . . . . . . . .
Introduction Notes on Discs Introduction To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Handling Discs This manual provides information on the operation and maintenance of your DVD player. Should the unit require service, contact an authorized service location. Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.
Types of Playable Discs DVD (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD±R/RW and CD-R/RW, Dual disc that contains audio titles, MP3, WMA, and/or JPEG files. Notes: • Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs may not be played on the unit. • Do not use irregularly shaped CDs (e.g., heartshaped or octagonal) since they may result in malfunctions.
a 1/' (STANDBY/ON) Switches the unit ON and OFF. b Disc Tray Insert a disc here. c AUDIO IN The AUDIO IN port means you can connect a audio device to play through the surround sound speakers. d Z (OPEN/CLOSE) Opens or closes the disc tray. e x (STOP) Stops playback. f B (PLAY) Starts playback. SOURCE Press and hold down this button about 3 seconds, then press repeatedly to select other function d e f g hi j Installation and Setup c g X (PAUSE) Pause playback.
Remote Control 1/') AUDIO (1 Switches the unit ON and OFF. FUNCTION Selects the function (DVD/CD, FM) INPUT Changes the input source ( AUX, AUX OPT, AUDIO IN) SLEEP Sets the System to turn off automatically at a specified time. DIMMER Changes brightness of the display window on the front panel during in power-on status. RETURN Press to move back wards in the menu. TOP MENU If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may appear.
TV Connection Video connection Make one of the following connections, depending on the capabilities of your existing equipment. Connect the MONITOR OUT jack from the DVD/CD Receiver to the VIDEO IN jack on the TV using the video cable (V). Rear of TV COMPONENT VIDEO / PROGRESSIVE SCAN INPUT Component Video connection Connect the COMPONENT VIDEO OUT jacks from the DVD/CD Receiver to the corresponding jacks on the TV using an Y PB PR cable (C).
Optional Equipment Connection Rear of DVD/CD Receiver A (not supplied) O OUT IN VIDEO AUDIO (L) AUDIO (R) OPTICAL OUT Auxiliary device DVD Player (or Digital Device, etc) AUX IN connection (A) Connect a Output of auxiliary device to the AUX AUDIO Input (L/R) Connector. OPTICAL IN connection (O) Connect an optical output of DVD Player (or Digital Device etc) to the OPTICAL IN connector. AUDIO IN connection (D) Connect a output of portable device (MP3 or PMP etc) to the AUDIO input connector.
HDMI Connection About HDMI HDMI compatible TV HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for an easy all- digital output to an HDMI or DI-equipped TV. HDMI H Connection to an HDMI TV requires an HDMI cable while connection to a DVI-equipped TV requires a DVI adapter besides a HDMI cable. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.
Speaker System Connection Connect the speakers using the supplied speaker cables. To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.). Notes: • Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are reversed, the sound will be distorted and will lack base. • If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers.
1. Press DISPLAY to show various playback information. The displayed items differ depending on the disc type or playing status. By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 10 to 13. Introduction You can display various information about the disc loaded on-screen.
General Operation DISPLAY 1. Press SETUP. The Setup menu appears. TV Aspect 4:3 – Select when a standard 4:3 TV is connected. 2. Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s). Display Mode The Display Mode setting works only when the TV Aspect mode is set to 4:3. 3. Use v / V to select the second desired option and then press B to move to the third level.
5.1 Speaker Setup Each DVD disc has a variety of audio output options. Set the player’s AUDIO options according to the type of audio system you use. Make the following settings for the built-in 5.1 channel surround decoder. Introduction AUDIO Installation and Setup 1. Press ENTER, and the 5.1 Speaker Setup menu appears. Dynamic Range Control (DRC) Set Vocal to On only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc will mix into normal stereo sound.
5.1 Speaker Setup Test Press b / B to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system. Front Left (Front L) → Center→ Front Right (Front R) → Rear Right (Rear R) → Rear Left (Rear L) → SubWoofer LOCK (Parental Control) Rating Blocks playback of rated DVDs based on their contents. Not all discs are rated. 1. Select “Rating” on the LOCK menu then press B. 2. Input a password and press ENTER. 3.
Operation General features Buttons Operations Discs Z (OPEN / CLOSE) Opens or closes the disc tray. ALL X (PAUSE) During playback, press X to pause playback. ALL Press X repeatedly to play Frame-by-Frame. DVD During playback, press . or > to go to the next chapter/track or to return to the beginning of the current chapter/track. ALL ./> Press . twice briefly to step back to the previous chapter/track. During playback, press m or M repeatedly to select the required scan speed.
Additional features Time Search DVD To start playing at any chosen time on the disc: 1. Press DISPLAY during playback. 2. Press v / V to select the time clock icon and “--:--:--” appears. 3. Input the required start time in hours, minutes, and seconds from left to right. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then input the correct numbers. 4. Press ENTER to confirm. Playback starts from the selected time. 1.5 times speed playback DVD You can play at 1.
Playing an Audio CD or MP3/WMA file ID3 TAG When playing a file containing information such as track titles, you can see the information by pressing DISPLAY. (Song, Artist, Album, Genre, Comment) This unit can play Audio CDs or MP3/WMA files.
Programmed Playback The program function enables you to store your Favourite tracks from any disc in the receiver memory. A program can contain 30 tracks. 1. Insert a disc. Audio CD and MP3/WMA Discs: Repeat Programmed Tracks 1. Press REPEAT when playing a disc. The repeat icon appears. 2. Press REPEAT to select a desired repeat mode. • Track: repeats the current track • All: repeats all the tracks on programmed list. • Off (No display): does not play repeatedly. 2.
Viewing a JPEG file This unit can play discs with JPEG files. Before playing JPEG recordings, read the notes on JPEG Recordings on the right. 1. Insert a disc and close the tray. The PHOTO menu appears on the TV screen. Still Picture X) during the slide show. 1. Press PAUSE (X The DVD/CD Receiver will now go into the PAUSE mode. 2. To return to the slide show, press PLAY or press X) again. PAUSE (X Moving to another File Press SKIP (.
Presetting the Radio Stations Listening to the Radio You can preset 50 stations for FM. Before tuning, make sure that you have turned down the volume. Preset radio stations in the DVD/CD Receiver’s memory first (see “Presetting radio stations” on the left). 1. Press FUNCTION on the remote control until FM appears in the display window. 2. Press and hold TUNING.(-/+) for about two seconds until the frequency indication starts to change, then release.
Press SLEEP/DIMMER one or more times to select delay time between 10 and 180 minutes, after the player will turn off. To check the remaining time, press SLEEP/DIMMER To cancel the sleep function, press SLEEP/DIMMER repeatedly until “SLEEP 10” appears, and then press SLEEP/DIMMER once again while “SLEEP 10” is displayed. Note: You can check the remaining time before the DVD/CD Receiver turns off. Press SLEEP. The remaining time appears in the display window. Dimmer Press SLEEP/DIMMER once.
Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Cause Correction No power. • The power cord is disconnected. • Plug the power cord securely into the wall outlet. The power is on, but the DVD/CD Receiver does not work. • No disc is inserted. • Insert a disc. (Check that the DVD or, audio CD indicator in the DVD display is lit.) No picture. • The TV is not set to receive DVD signal output.
Cause • The antenna is positioned or connected Radio stations cannot poorly. be tuned in. Symptom The remote control does not work properly. The front panel display is too dim. 23 Correction • Connect the antenna securely. • Adjust the antennas and connect an external antenna if necessary. • The signal strength of the stations is too weak (when tuning in with automatic tuning). • Tune in the station manually.
Specifications Speakers Amplifier FM Tuner Video CD/DVD General Power supply Power consumption Net Weight External dimensions (W x H x D) Operating conditions Operating humidity Laser Video system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video output COMPONENT VIDEO OUT HDMI OUT Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Stereo mode Surround mode (* Depending on the sound mode settings and the source,
WARRANTY (Only in U.S.A.
TH-G31J 0409SKMLGEEGL