DVD DIGITAL THEATER SYSTEM TH-M65 Consists of XV-THM65, SP-PWM65, SP-THM65C and SP-THM65F TH-M55 Consists of XV-THM55, SP-PWM55, SP-THM55C and SP-THM55F TH-M45 Consists of XV-THM45, SP-PWM45, SP-THM45C, SP-THM45F and SP-THM45S INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No.
Warnings, Cautions and Others 1. CLASS 1 LASER PRODUCT 2. DANGER: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service personnel. CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION — .
Warnings, Cautions and Others For Canada/pour le Canada CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND.
Table of contents Introduction...................................... 2 Creating realistic sound fields ...... 29 Notes on handling..................................................................2 Supplied accessories .............................................................2 Using the surround mode ....................................................31 Adjusting the sound.............................................................32 About discs ......................................
Introduction % Safety precautions Notes on handling Avoid moisture, water and dust Do not place the system in moist or dusty places. % Important cautions Installation of the system • Select a place which is level, dry and neither too hot nor too cold; between 5°C and 35°C (41°F and 95°F). • Leave sufficient distance between the system and the TV. • Do not use the system in a place subject to vibration. Power cord • Do not handle the power cord with wet hands! • A small amount of power (1.
About discs Playable disc types This system has been designed to play back the following discs: DVD Video (DVD), Video CD (VCD), Super Video CD (SVCD), Audio CD, CD-R and CD-RW. • This system can also play back MP3 and JPEG files recorded on CD-Rs and CD-RWs. (A pg. 23) • This system can also play back finalized DVD-Rs recorded in DVD VIDEO format. However, some discs may not be played back because of their disc characteristics or recording conditions.
About discs IMPORTANT Before playing a disc, make sure of the following; • Check the connection with the TV. • Turn on your TV and select the correct input mode on the TV to view the pictures or on-screen information on the TV screen. • For DVD playback, you can change the initial setting to your preference. (A pg.
Names of parts and controls The illustrations of the center unit and the subwoofer used in this manual are of TH-M65 unless otherwise noted. Front panel (center unit) A B C D E F G H I Standby lamp (STANDBY) A pg. 19 Standby-on button (F STANDBY/ON) A pg. 19 Stop button (7) A pg. 23 Play button (3) A pg. 23 Pause button (8) A pg. 23 Reverse skip button (4) A pg. 26 Forward skip button (¢) A pg. 26 Source button (SOURCE) A pg. 20 Volume control (VOLUME) A pg. 20 J Headphones jack (PHONES) A pg.
Names of parts and controls Display window (center unit) A Disc indicators A pg. 25 B MP3 indicator A pg. 24 C Channel indicator (CH) A pg. 28 D Main display A pg. 24 E Stereo indicator (ST) A pg. 27 F Tuning indicator (TUNED) A pg. 27 G Auto muting indicator (AUTO MUTING) A pg. 28 H • Source signal indicators (=>?@CDE) A pg. 30 • Subwoofer indicator ( ) A pg. 30 • Sound reproducing speaker indicator ( ) A pg. 30 I • Dolby Pro Logic II indicator (/PLII) A pg. 29 • Linear PCM indicator (LPCM) A pg.
Names of parts and controls Remote control NOTE • To use buttons I – W and g – p, slide down the remote control cover. 7 A Remote control mode selector A pg. 17 – 54 AUDIO, TV, VCR/DBS B Muting button (MUTING) A pg. 20 C Disc buttons (DISC 1-5) A pg. 23 D TV volume buttons (TV VOL +/–) A pg. 17 E Operating buttons • Play button (3) A pg. 24 • Forward/reverse skip buttons (¢/4) A pg. 26 • Fast-forward/reverse playback buttons (¡/1) A pg. 26 • Stop button (7) A pg. 23 • Pause button (8) A pg.
Getting started Connections • Do not connect the AC power cord until all other connections have been made. • Since different components often have different terminal names, carefully read the instructions supplied with the components you are going to connect. Connecting a TV To view pictures and on-screen displays, connect the TV to the center unit. • You can get better picture quality in the order — Component video > S-video > Composite video.
Getting started Connecting the FM and AM antennas Make sure the antenna conductors do not touch any other terminals, connecting cords and power cords. This could cause poor reception. % AM loop antenna If reception is poor Connect an outdoor single vinyl-covered wire antenna (not supplied) to the AM EXT terminal. (Keep the AM loop antenna connected.) • Twist together both wires. Setting up supplied AM loop antenna Attach the AM loop to its base by snapping the tabs on the loop into the slot on the base.
Getting started Connecting the powered subwoofer Connect the supplied powered subwoofer (SP-PWM65/SP-PWM55/SP-PWM45) using the system cord (supplied). • Connect the system cord by matching the # marks on the plugs to the ones on the center unit and powered subwoofer. System cord (supplied) Ensure that the # mark on the plug faces down.
Getting started This page is for % Assembling the satellite speakers (TH-M65 only) Each speaker (except the center speaker) has been divided into two parts for shipment. Before connecting the satellite speakers, first assemble them by following the procedure below. 3 Fix the stand to the speaker section. • Be sure to tighten the screws firmly. Speaker section Stand Screws (4) (supplied, M4 x 25 mm) Speaker section Stand Before assembling — • Prepare a Phillips screwdriver.
Getting started This page is for % Connecting the satellite (front, center, surround) speakers (TH-M65) Each speaker (SP-THM65F) can be used as a front or surround speaker. CAUTION • When you connect (larger) speakers other than the supplied ones, only use speakers with the same speaker impedance (SPEAKER IMPEDANCE) as indicated by the speaker terminals on the rear of the powered subwoofer. • DO NOT connect more than one speaker to one speaker terminal.
Getting started This page is for % Connecting the satellite (front, center, surround) speakers (TH-M55/TH-M45) TH-M55: Each speaker (SP-THM55F) can be used as a front or surround speaker. TH-M45: Be sure to identify each speaker (SP-THM45C/SP-THM45F/SP-THM45S) and connect them to the corresponding terminals of the powered subwoofer.
Getting started Connecting to an analog component You can enjoy the sound of an analog component such as a VCR, TV, or Cassette recorder with this system. Use RCA pin plug cords (not supplied) for connection.
Getting started Connecting the power cord Make sure that all connections have been completed, before plugging in the power cords of the center unit and powered subwoofer. 1 Firmly insert the supplied power cord into the Ó AC IN socket on the rear of the center unit. 2 Plug both power cords into AC outlets. Powered subwoofer Center unit Plug into AC outlets. Power cord (supplied) Power cord CAUTION • Disconnect the power cord before cleaning or moving the system.
Getting started Using the remote control The remote control makes it easy to use many of the system functions from a distance of up to 7 m (23 ft) away. • You can also use the remote control supplied for this system to operate other manufacturers’ TVs (A pg. 17), VCRs (A pg. 18) and DBS tuners/CATV converters (A pg. 17). Putting batteries in the remote control Operating the system from the remote control Aim the remote control directly at the remote sensor on the center unit.
Getting started 4 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits). Examples: For a Hitachi TV: Press 1, then 0. For a Toshiba TV:Press 0, then 8. Remote control mode selector (play button) Manufacturer Code Manufacturer Code JVC 01 Samsung 12 Hitachi 10 Sanyo 13 Magnavox 02 Sharp 06 Mitsubishi 03 Sony 07 Panasonic 04, 11 Toshiba 08 RCA 05 Zenith 09 5 Release F TV. 6 Try operating your TV by pressing F TV.
Getting started 4 Press number buttons (1-9, 0) to enter 4 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits). the manufacturer’s code (2 digits). Examples: For a GI Jerrold product: Press 0, then 1. For a Sony product: Press 2, then 0. Examples: For a Philips VCR: Press 0, then 9. For an NEC VCR: Press 2, then 5.
Basic operations This section mainly explains operations commonly used when you enjoy this system. • Turn on your TV and select the correct input mode on the TV. Turning the system on/off % To turn the power on IMPORTANT Before using the remote control for the following operation, • Set the remote control mode selector to AUDIO. On the remote control: Press . AUDIO. On the center unit: Press . STANDBY/ON. Remote control mode selector The STANDBY lamp goes off.
Basic operations Selecting the source to play On the remote control: Press one of the source selecting buttons (DVD, FM/AM, VCR or DBS). DVD: To play back a disc (DVD, Video CD etc.). (A pg. 23, 25) FM/AM: To tune in an FM or AM station. (A pg. 27) Each time you press the button, the band alternates between FM and AM. VCR: To select the source from a component connected to the VCR IN jacks and AUDIO IN (VCR) jacks. (A pg.
Basic operations IMPORTANT Before using the remote control for the following operation, To change the remaining time until the shut-off time Press SLEEP repeatedly. • Each time you press the button, the shut-off time changes. • Set the remote control mode selector to AUDIO. To cancel the Sleep Timer Press SLEEP repeatedly until “0min” appears on the display window. • Turning off the power also cancels the Sleep Timer.
Basic operations Changing the decode mode When you play a disc (or software) encoded with Dolby Digital or DTS Digital Surround, the following symptoms may occur; • Sound does not come out at the beginning of playback. • Noise comes out while searching for or skipping chapters or tracks. In these cases, change the decode mode to “DOLBY D” (for Dolby Digital) or “DTS” (for DTS Digital Surround). % When DVD or DBS is selected as the source On the remote control: Press DECODE to select the decode mode.
Playback This section explains basic operations of DVD player. For more details about DVD player operations, see pages 33 to 45. • shows the types of discs the operation is available for. • Turn on your TV and select the correct input mode on the TV. IMPORTANT Before using the remote control for the following operation; 1 Set the remote control mode selector to AUDIO. 2 Press DVD. Basic playback 7 To load a disc Up to 5 discs can be loaded.
Playback 7 Playback information on the display window NOTE • You can also start playback by pressing 3 (play button) or DVD. • Regardless of the operation for starting playback, the system plays back all available discs sequentially until you stop playback. However, the system stops playback after playback of the disc in the fifth tray. • When Video CDs/SVCDs with PBC function (A pg.
Playback NOTE • You can change the time information mode. (A pg. 34) • You can also check the playback information on the TV screen. (A pg. 33) 7 Disc information on the display window The disc indicators on the display window show the current status of the corresponding disc tray. Example: When the discs are loaded to disc trays 1, 2 and 5, and the disc in the disc tray 5 is selected.
Playback Fast-forward/fast-reverse search Locating a desired selection using number buttons You can search for a particular point while playing a disc. You can locate the desired title, chapter, track or file by selecting its number. 7 During playback On the remote control: Press ¡/1. Each time you press the button, the search speed changes as follows; Forward: * Reverse: * * and are only available for DVD. To return to normal speed playback Press 3 (play button).
Tuner operations You can browse through all the stations or use the preset function to go immediately to a particular station. IMPORTANT Before using the remote control for the following operation; 1 Set the remote control mode selector to AUDIO. 2 Press FM/AM. Manual tuning On the remote control: 1 Press FM/AM repeatedly to select the band. Each time you press the button, the band alternates between FM and AM. The selected band appears on the display window, then the last received station appears.
Tuner operations 2 Press MEMORY. The channel number position starts flashing on the display window for about 5 seconds. While the channel number position is flashing: 3 Press number button(s) (1-10, +10) to select a channel number. The channel number and the CH indicator start flashing. Examples: For channel number 3: Press 3. For channel number 14: Press +10, then 4. (For FM stations only) For channel number 24: Press +10 twice, then 4. For channel number 30: Press +10 twice, then 10.
Creating realistic sound fields You can use the following surround modes to reproduce a realistic sound field. • Dolby Surround • • Dolby Pro Logic II Dolby Digital • DTS Digital Surround • DSP modes • • DAP modes All Channel Stereo % Dolby Surround Dolby Pro Logic II* Dolby Pro Logic II has a newly developed multichannel playback format to decode all 2 channel sources — stereo source and Dolby Surround encoded source — into a 5.1 channel.
Creating realistic sound fields 7 Indicators on the display window Creating sound field Reflections from behind Digital signal format indicators LPCM: Lights when Linear PCM signal comes in. GDIGITAL: Lights when Dolby Digital signals come in. C: Lights when DTS Digital (Surround) signals come in. No indication: No digital signal indicator lights when analog signals come in. Early reflections Direct sounds All Channel Stereo All Channel Stereo (ALL CH ST.
Creating realistic sound fields IMPORTANT Before using the remote control for the following operation; • Set the remote control mode selector to AUDIO. Using the surround mode The system is set up to automatically select the optimal surround mode for input signal from digital multichannel software. When playing back 2 channel source, you can select the desired surround mode manually.
Creating realistic sound fields Adjusting the sound On the remote control: 1 Press TEST. Check if you can hear the sounds through all the speakers at the equal level.
Advanced operations This section explains advanced operations for disc playback using the remote control. • shows the types of discs an operation is available for. • Turn on your TV and select the correct input mode on the TV. 7 Contents of the on-screen bar during playback DVD NOTE • If “B” appears on the TV screen when pressing a button, the disc cannot accept an operation you have tried to do or information required for that operation is not recorded to the disc.
Advanced operations Basic operation on the on-screen bar Example: During DVD playback Example: When selecting the Repeat mode of DVD 7 During playback or while stopped • • • • 1 Press ON SCREEN twice. The on-screen bar appears on the TV screen. • The currently selected item shows green. (back to the beginning) TIME: Elapsed playing time of current chapter/track REM: Remaining time of current chapter/track TOTAL: Elapsed time of disc T.
Advanced operations Locating a desired chapter using the onscreen bar Cursor (3/2///5) /ENTER When playing back a DVD, you can locate the chapter number to be played using the on-screen bar. 7 During playback 1 Press ON SCREEN twice. The on-screen bar appears on the TV screen. Number buttons 2 Press Cursor 3/2 to move H to 3 Press ENTER. . The following pop-up window appears under the selected item.
Advanced operations 2 Use number buttons (0-10, +10) to enter the desired title or group number. The system starts playback from the first chapter/track/file of the selected title/group. Example: To select 8: Press 8. To select 10: Press 10. Or press +10, then 0. To select 20: Press +10, then 10. Or press +10 twice, then 0. To select 25: Press +10 twice, then 5. • Specify the number within 5 seconds after pressing TITLE/ GROUP (i.e.
Advanced operations To select the other group Press Cursor 2 to return to the group list, then press Cursor //5 to select the desired group. To skip groups/tracks during playback Press Cursor / repeatedly for forward-skip. Press Cursor 5 repeatedly for reverse-skip. To start playback by specifying the track number (play button) Cursor (3/2///5) /ENTER Press number buttons (0-10, +10) to enter the track number. Example: To select 3: Press 3. To select 14: Press +10, then 4.
Advanced operations When using the on-screen bar: Selecting a view angle of DVD While playing back a DVD containing multi-view angles, you can enjoy the same scene at different angles. Cursor (3/2///5) /ENTER 1 Press ON SCREEN twice. The on-screen bar appears on the TV screen. 2 Press Cursor 3/2 to move H to 3 Press ENTER. . The following pop-up window appears under the selected item. Example: The first view angle is selected out of 3 view angles recorded.
Advanced operations When using the on-screen bar: Selecting the subtitle/ audio languages When playing back a DVD (or SVCD) containing subtitles in several languages, you can select the subtitle language to be displayed on the TV screen. When a DVD contains audio (sound track) in several languages, you can also select the language (sound track) to listen to. • You can also select specific audio channel(s) on Video CDs/ SVCDs. 1 Press ON SCREEN twice. The on-screen bar appears on the TV screen.
Advanced operations 4 Press Cursor //5 to select the desired audio language. Each time you press the button, the audio language changes. 5 Press ENTER. The pop-up window disappears. To turn off the on-screen bar Press ON SCREEN. NOTE When using the on-screen bar: 1 Press ON SCREEN twice. The on-screen bar appears on the TV screen. 2 Press Cursor 3/2 to move H to 3 Press ENTER. . The following pop-up window appears under the selected item.
Advanced operations Special picture playback This system provides special picture playback functions including frame-by-frame, slow-motion and zoom. (play button) To return to normal playback Press 3 (play button). NOTE • Sound cannot be heard during slow-motion playback. Zooming in 7 During playback or while paused 1 Press ZOOM. Each time you press ZOOM, scene magnification changes as follows; Cursor (3/2///5) /ENTER ] x 1 (normal size) ] x 1.
Advanced operations Changing the VFP setting The VFP (Video Fine Processor) function enables you to adjust the picture character according to the type of programming, picture tone or personal preference. NOTE Before you start operation; • The VFP setting screen disappears if no operations are done for more than about 10 seconds. If the setting screen disappears before you finish, start from step 1 again. 7 To select a VFP mode 1 Press VFP during playback. The current VFP settings appear on the TV screen.
Advanced operations Example for 4 A Program Playback You can play up to 99 titles (for DVD) or tracks (for other types of discs) in any order from among multiple discs. You may program the same title or track more than once. Example for 4 B Selected title/track number Selected group number Selected disc number (play button) 5 Repeat step 4 to program following orders.
Advanced operations Repeating the current selection or all discs Random Playback 7 For DVD/Audio CD/MP3/JPEG: During playback For Video CD/SVCD: During playback without PBC function You can play titles or tracks on a disc in random order. When using the REPEAT button: 1 Press REPEAT. Cursor (3/2///5) /ENTER Each time you press REPEAT, the Repeat mode changes cyclically. • Repeat mode indicators appear on the display window and a repeat mode indication appears on the TV screen.
Advanced operations When using the on-screen bar (except for JPEG disc): When using the on-screen bar: 1 Press ON SCREEN twice. 1 Press ON SCREEN twice. The on-screen bar appears on the TV screen. The on-screen bar appears on the TV screen. 2 Press Cursor 3/2 to move H to 3 Press ENTER. . 2 Press Cursor 3/2 to move H to 3 Press ENTER. . The following pop-up window appears under the selected item. The following pop-up window appears under the selected item.
Setting DVD preferences You can adjust the initial settings for DVD playback according to your preference or needs using 5 choice menus shown on the TV screen. • Adjustments are possible only when selecting DVD as the source. A pg. 49) : Audio menu (AUDIO) (A You can adjust sound settings. Using the choice menus • Turn on your TV and select the correct input mode on the TV. • You can only use the remote control for choice menu operations. • You can change the language used in the choice menus. (A pg.
Setting DVD preferences Basic operation on the choice menus 4 Press ENTER. The pop-up window, listing the selectable options, appears on the choice menu. IMPORTANT Before using the remote control for the following operation; 1 Set the remote control mode selector to AUDIO. 2 Press DVD. Cursor (3/2///5) /ENTER 5 Press Cursor //5 repeatedly to select the desired option. Example: When “FILM” is selected. 1 Press CHOICE. The language menu (LANGUAGE) appears on the TV screen. 6 Press ENTER.
Setting DVD preferences Menu description : Language 7 SUBTITLE Some DVDs have multiple subtitle languages. • Select the initial subtitle language*. OFF (no indication of subtitles), ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN, ITALIAN, JAPANESE and language codes from AA to ZU (see below) menu (LANGUAGE) NOTE 7 ON SCREEN LANGUAGE • You can select “MENU LANGUAGE”, “AUDIO LANGUAGE” and “SUBTITLE” only while playback is stopped. • Select the language shown on the TV screen when operating this system.
Setting DVD preferences : Picture menu (PICTURE) : Audio menu (AUDIO) 7 MONITOR TYPE 7 L/R BALANCE You can select the monitor type to match your TV when you play DVDs recorded in the picture’s height/width ratio of 16:9. You can adjust the balance between the front left and front right speakers. L-21 to L-1 O CENTER O R-1 to R-21 (by 1 step) • CENTER The levels of the front left and right speakers are identical.
Setting DVD preferences 7 CROSS OVER* 7 Level menu (LEVEL) Small speakers cannot reproduce bass sounds efficiently. If you use a small speaker in any position, this system automatically reallocates the bass sound elements assigned to the small speaker to one of the large speakers. To use this function properly, set crossover frequency level according to the size of the smallest speaker connected.
Setting DVD preferences : Other setting menu (OTHERS) NOTE • You can select “PARENTAL LOCK” only while playback is stopped. 7 RESUME You can activate or deactivate Resume Playback function. • ON Select this to activate the function. Parental Lock Using this function, you can restrict playback of a DVD containing violent scenes or scenes not suitable for your other family members. Nobody can play such a disc unless this function is canceled.
Setting DVD preferences 6 Press ENTER. 4 Press number buttons (0-9) to enter your password, then press ENTER. • If you enter a wrong password, “WRONG! RETRY...” appears under the PARENTAL LOCK sub-menu. You cannot go to the next steps before you enter the correct password. 5 Press Cursor //5 repeatedly to move H to the item you want to change, then 7 Press Cursor //5 repeatedly to select the level of restriction, then press ENTER. The H moves to “PASSWORD”. • Select “NONE” to cancel this function.
Setting DVD preferences Country/Area codes list for Parental Lock AD AE AF AG AI AL AM AN AO AQ AR AS AT AU AW AZ BA BB BD BE BF BG BH BI BJ BM BN BO BR BS BT BV BW BY BZ CA CC CF CG CH CI CK CL CM CN CO CR CU CV CX CY CZ DE DJ DK DM DO DZ EC EE EG EH 53 Andorra United Arab Emirates Afghanistan Antigua and Barbuda Anguilla Albania Armenia Netherlands Antilles Angola Antarctica Argentina American Samoa Austria Australia Aruba Azerbaijan Bosnia and Herzegovina Barbados Bangladesh Belgium Burkina Faso Bulga
System setting You can adjust the sound and speaker settings of this system. • The adjustments on a source take effect for the other sources. IMPORTANT Before using the remote control for the following operation; • Set the remote control mode selector to AUDIO. Cursor (3/2///5) NOTE Before you start operation; • There is a time limit when doing the following steps. If the setting is cancelled before you finish, start from step 1 again.
AV COMPU LINK remote control system The AV COMPU LINK remote control system allows you to operate JVC TVs and VCRs through the center unit. This system is equipped with the AV COMPU LINK-III, which adds a function to operate JVC’s video components via the video components terminals. To use this remote control system, you need to connect the video components you want to operate as follows. • Refer also to the manuals supplied with your TV and video components.
References To clean the disc Wipe the disc with a soft cloth in a straight line from center to edge. Maintenance To get the best performance out of this system, keep your discs and mechanism clean. % General Notes In general, you will have the best performance by keeping your discs and the mechanism clean. • Store discs in their cases and keep them in cabinets or on shelves. % Handling Discs • Remove the disc from its case by holding it at the edge while pressing the center hole lightly.
References PROBLEM No sound. POSSIBLE CAUSE SOLUTION The system cord and/or speaker cord is not connected. Check the connection. (A pg. 10 – 13) There is a short in the speaker cord. Reconnect the speaker cord. The audio cord is not connected to AUDIO IN (VCR) and/or DIGITAL IN (DBS) correctly. Connect the cord correctly. (A pg. 14) An incorrect source has been selected. Select the correct source. (A pg. 20) Muting is on. Press MUTING to cancel muting. (A pg.
References MP3 Playback PROBLEM POSSIBLE CAUSE A disc cannot be played. No MP3 files are recorded to the disc. Not MP3 files but JPEG files are played. SOLUTION Replace the disc. MP3 files do not have the file extension in their file names. Add correct file extension (.mp3, .Mp3, .mP3 or .MP3) to their file names. (A pg. 3) MP3 files are not recorded in a format compliant with ISO 9660 Level 1 or 2. Replace the disc. (Record MP3 files using a compliant application.
References Glossary Aspect ratio The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs is 4:3, and that of wide-screens is 16:9. Chapter Multiangle By recording multiple scenes progressing at the same time in a single title, the user can select view angles. This feature is called the multiangle function. Multichannel DVD is specified to have each sound track constitute one sound field.
References Index A A-B Repeat Playback.................................................................... 45 All Channel Stereo (ALL CH ST.) ....................................... 30 – 32 Angle............................................................................................. 38 Audio CD .................................................................................... 3, 4 Audio language (AUDIO LANGUAGE) ............................... 39, 48 Auto standby (AUTO STANDBY) .....................
References Specifications % Subwoofer (SP-PWM65) Amplifier section Front/Center/Surround: % Center unit (XV-THM65/XV-THM55/XV-THM45) Audio section Total Harmonic Distortion 0.02 % NOTE: This value is measured at System cord CONNECTOR for reference.
References % Satellite Speakers (SP-THM65F) % Satellite Speakers Speakers: Front speakers (SP-THM45F) Speakers: 8.0 cm (3-3/16 inches) Bass-reflex, Magnetically Shielded Power Handling Capacity: 120 W Impedance: 4C Frequency Range: 90 Hz to 20 kHz Dimensions (W M H M D):103 mm M 115 mm M 100 mm (4-1/16 inches M 4-9/16 inches M 3-15/16 inches) Mass: 0.64 kg (1.5 lbs) 5.
Authorized Service Centers QUALITY SERVICE HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE: 1 (800) 537-5722 http://www.jvc.com Dear Customer, In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating the unit. In the event that repairs are necessary, please call 1 (800) 537-5722 for your nearest authorized servicer or visit our website at www.JVC.com Remember to retain your Bill of Sale for Warranty Service.
64
TH-M65/TH-M55/TH-M45 DVD DIGITAL THEATER SYSTEM EN © 2003 VICTOR COMPANY OF JAPAN, LIMITED 0303SKMIDEJEM